wl12xx: remove sdio_test module

This module has been causing more trouble than being useful.  It only
tests the SDIO speed by connecting to the wl12xx chip and does some
throughput calculations.  It is an ugly quick hack and, if we really
want to have it as part of wl12xx we need to clean it up and implement
it properly.

A tarball of the code has been created and posted here, with some
instructions:

http://wireless.kernel.org/en/users/Drivers/wl12xx#SDIO_performance_test_moduleSigned-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/Kconfig

@@ -42,16 +42,6 @@ config WL12XX_SDIO
 	  If you choose to build a module, it'll be called wl12xx_sdio.
 	  Say N if unsure.
 
-config WL12XX_SDIO_TEST
-	tristate "TI wl12xx SDIO testing support"
-	depends on WL12XX && MMC && WL12XX_SDIO
-	default n
-	---help---
-	  This module adds support for the SDIO bus testing with the
-	  TI wl12xx chipsets.  You probably don't want this unless you are
-	  testing a new hardware platform.  Select this if you want to test the
-	  SDIO bus which is connected to the wl12xx chip.
-
 config WL12XX_PLATFORM_DATA
 	bool
 	depends on WL12XX_SDIO != n || WL1251_SDIO != n

drivers/net/wireless/wl12xx/Makefile

@@ -3,14 +3,11 @@ wl12xx-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
 
 wl12xx_spi-objs 	= spi.o
 wl12xx_sdio-objs	= sdio.o
-wl12xx_sdio_test-objs	= sdio_test.o
 
 wl12xx-$(CONFIG_NL80211_TESTMODE)	+= testmode.o
 obj-$(CONFIG_WL12XX)			+= wl12xx.o
 obj-$(CONFIG_WL12XX_SPI)		+= wl12xx_spi.o
 obj-$(CONFIG_WL12XX_SDIO)		+= wl12xx_sdio.o
 
-obj-$(CONFIG_WL12XX_SDIO_TEST)		+= wl12xx_sdio_test.o
-
 # small builtin driver bit
 obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx_platform_data.o