ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6qdl-gw5903.dtsi

@@ -311,7 +311,7 @@ &i2c3 {
 	tlv320aic3105: codec@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
 		/* Regulators */