MIPS: Emulate the BC1{EQ,NE}Z FPU instructions

MIPS R6 introduced the following two branch instructions for COP1:

BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero
BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

arch/mips/include/uapi/asm/inst.h

@@ -115,7 +115,8 @@ enum cop_op {
 	mfhc_op       = 0x03, mtc_op	    = 0x04,
 	dmtc_op	      = 0x05, ctc_op	    = 0x06,
 	mthc0_op      = 0x06, mthc_op	    = 0x07,
-	bc_op	      = 0x08, cop_op	    = 0x10,
+	bc_op	      = 0x08, bc1eqz_op     = 0x09,
+	bc1nez_op     = 0x0d, cop_op	    = 0x10,
 	copm_op	      = 0x18
 };
 

arch/mips/kernel/branch.c

@@ -403,7 +403,7 @@ int __MIPS16e_compute_return_epc(struct pt_regs *regs)
 int __compute_return_epc_for_insn(struct pt_regs *regs,
 				   union mips_instruction insn)
 {
-	unsigned int bit, fcr31, dspcontrol;
+	unsigned int bit, fcr31, dspcontrol, reg;
 	long epc = regs->cp0_epc;
 	int ret = 0;
 
@@ -618,6 +618,46 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 	 * And now the FPA/cp1 branch instructions.
 	 */
 	case cop1_op:
+		if (cpu_has_mips_r6 &&
+		    ((insn.i_format.rs == bc1eqz_op) ||
+		     (insn.i_format.rs == bc1nez_op))) {
+			if (!used_math()) { /* First time FPU user */
+				ret = init_fpu();
+				if (ret && NO_R6EMU) {
+					ret = -ret;
+					break;
+				}
+				ret = 0;
+				set_used_math();
+			}
+			lose_fpu(1);    /* Save FPU state for the emulator. */
+			reg = insn.i_format.rt;
+			bit = 0;
+			switch (insn.i_format.rs) {
+			case bc1eqz_op:
+				/* Test bit 0 */
+				if (get_fpr32(&current->thread.fpu.fpr[reg], 0)
+				    & 0x1)
+					bit = 1;
+				break;
+			case bc1nez_op:
+				/* Test bit 0 */
+				if (!(get_fpr32(&current->thread.fpu.fpr[reg], 0)
+				      & 0x1))
+					bit = 1;
+				break;
+			}
+			own_fpu(1);
+			if (bit)
+				epc = epc + 4 +
+					(insn.i_format.simmediate << 2);
+			else
+				epc += 8;
+			regs->cp0_epc = epc;
+
+			break;
+		} else {
+
 			preempt_disable();
 			if (is_fpu_owner())
 			        fcr31 = read_32bit_cp1_register(CP1_STATUS);
@@ -632,7 +672,8 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			case 0: /* bc1f */
 			case 2: /* bc1fl */
 				if (~fcr31 & (1 << bit)) {
-				epc = epc + 4 + (insn.i_format.simmediate << 2);
+					epc = epc + 4 +
+						(insn.i_format.simmediate << 2);
 					if (insn.i_format.rt == 2)
 						ret = BRANCH_LIKELY_TAKEN;
 				} else
@@ -643,7 +684,8 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			case 1: /* bc1t */
 			case 3: /* bc1tl */
 				if (fcr31 & (1 << bit)) {
-				epc = epc + 4 + (insn.i_format.simmediate << 2);
+					epc = epc + 4 +
+						(insn.i_format.simmediate << 2);
 					if (insn.i_format.rt == 3)
 						ret = BRANCH_LIKELY_TAKEN;
 				} else
@@ -652,6 +694,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 				break;
 			}
 			break;
+		}
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	case lwc2_op: /* This is bbit0 on Octeon */
 		if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))

arch/mips/math-emu/cp1emu.c

@@ -602,6 +602,33 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 #endif
 	case cop0_op:
 	case cop1_op:
+		/* Need to check for R6 bc1nez and bc1eqz branches */
+		if (cpu_has_mips_r6 &&
+		    ((insn.i_format.rs == bc1eqz_op) ||
+		     (insn.i_format.rs == bc1nez_op))) {
+			bit = 0;
+			switch (insn.i_format.rs) {
+			case bc1eqz_op:
+				if (get_fpr32(&current->thread.fpu.fpr[insn.i_format.rt], 0) & 0x1)
+				    bit = 1;
+				break;
+			case bc1nez_op:
+				if (!(get_fpr32(&current->thread.fpu.fpr[insn.i_format.rt], 0) & 0x1))
+				    bit = 1;
+				break;
+			}
+			if (bit)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.i_format.simmediate << 2);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+
+			return 1;
+		}
+		/* R2/R6 compatible cop1 instruction. Fall through */
 	case cop2_op:
 	case cop1x_op:
 		if (insn.i_format.rs == bc_op) {