s390/qeth: keep track of fixed prio-queue configuration

When a device is configured in prio-queue mode to pin all traffic onto
a specific HW queue, treat this as a distinct variant of prio-queueing
instead of QETH_NO_PRIO_QUEUEING.

This corrects an error message from qeth_osa_set_output_queues() for
devices configured in such a mode.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/s390/net/qeth_core.h

@@ -211,6 +211,7 @@ struct qeth_vnicc_info {
 #define QETH_PRIO_Q_ING_TOS   2
 #define QETH_PRIO_Q_ING_SKB   3
 #define QETH_PRIO_Q_ING_VLAN  4
+#define QETH_PRIO_Q_ING_FIXED 5
 
 /* Packing */
 #define QETH_LOW_WATERMARK_PACK  2

drivers/s390/net/qeth_core_main.c

@@ -3646,6 +3646,8 @@ int qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb)
 			return ~ntohs(veth->h_vlan_TCI) >>
 			       (VLAN_PRIO_SHIFT + 1) & 3;
 		break;
+	case QETH_PRIO_Q_ING_FIXED:
+		return card->qdio.default_out_queue;
 	default:
 		break;
 	}

drivers/s390/net/qeth_core_sys.c

@@ -211,16 +211,16 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev,
 		card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_VLAN;
 		card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
 	} else if (sysfs_streq(buf, "no_prio_queueing:0")) {
-		card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
+		card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_FIXED;
 		card->qdio.default_out_queue = 0;
 	} else if (sysfs_streq(buf, "no_prio_queueing:1")) {
-		card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
+		card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_FIXED;
 		card->qdio.default_out_queue = 1;
 	} else if (sysfs_streq(buf, "no_prio_queueing:2")) {
-		card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
+		card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_FIXED;
 		card->qdio.default_out_queue = 2;
 	} else if (sysfs_streq(buf, "no_prio_queueing:3")) {
-		card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
+		card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_FIXED;
 		card->qdio.default_out_queue = 3;
 	} else if (sysfs_streq(buf, "no_prio_queueing")) {
 		card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;