Commit c98e140f authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes

Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:

- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
  files, he has done this treewide and most of his changes are already in
  4.16

- Stefan provides two changes to the BCM283x DTS files in order to fix
  DTC warnings

- Florian fixes the amount of RAM on the BCM958625HR reference board to
  properly limit to what is initialized by the bootloader

* tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Move arm-pmu out of soc node
  ARM: dts: bcm283x: Fix unit address of local_intc
  ARM: dts: NSP: Fix amount of RAM on BCM958625HR
  ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
parents 20f4ed3a 2944866a
......@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
<0x3ff00100 0x100>;
};
smc@0x3404c000 {
smc@3404c000 {
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
};
......
......@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
<0x3ff00100 0x100>;
};
smc@0x3404e000 {
smc@3404e000 {
compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
};
......
......@@ -18,11 +18,11 @@ cpu@0 {
soc {
ranges = <0x7e000000 0x20000000 0x02000000>;
dma-ranges = <0x40000000 0x00000000 0x20000000>;
};
arm-pmu {
compatible = "arm,arm1176-pmu";
};
};
};
&cpu_thermal {
......
......@@ -9,20 +9,20 @@ soc {
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
local_intc: local_intc {
local_intc: local_intc@40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&local_intc>;
};
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&local_intc>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
};
};
timer {
compatible = "arm,armv7-timer";
......
......@@ -8,7 +8,7 @@ soc {
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
local_intc: local_intc {
local_intc: local_intc@40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
......
......@@ -465,7 +465,7 @@ thermal: thermal@7e212000 {
status = "disabled";
};
aux: aux@0x7e215000 {
aux: aux@7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;
......
......@@ -49,7 +49,7 @@ chosen {
memory {
device_type = "memory";
reg = <0x60000000 0x80000000>;
reg = <0x60000000 0x20000000>;
};
gpio-restart {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment