Commit caa1a700 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] az6007: Fix it to allow loading it without crash

Add some fixes to allow frontend attachment. The patch is not
complete yet, as just the frontend 0 is initialized. So, more
changes will be needed, including some changes at dvb-usb core.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 6da34706
......@@ -49,12 +49,20 @@ struct drxk_config terratec_h7_drxk = {
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct dvb_usb_adapter *adap = fe->sec_priv;
struct az6007_device_state *st = adap->priv;
struct az6007_device_state *st;
int status;
if (!adap || !st)
info("%s", __func__);
if (!adap)
return -EINVAL;
st = adap->priv;
if (!st)
return -EINVAL;
if (enable) {
down(&st->pll_mutex);
status = st->gate_ctrl(fe, 1);
......@@ -66,7 +74,7 @@ static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
}
struct mt2063_config az6007_mt2063_config = {
.tuner_address = 0xc0,
.tuner_address = 0x60,
.refclock = 36125000,
};
......@@ -84,10 +92,8 @@ int az6007_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
if (ret < 0) {
warn("usb in operation failed. (%d)", ret);
ret = -EIO;
} else
ret = 0;
return -EIO;
}
deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
......@@ -219,7 +225,7 @@ static int az6007_frontend_poweron(struct dvb_usb_adapter *adap)
u16 index;
int blen;
info("az6007_frontend_poweron adap=%p adap->dev=%p\n", adap, adap->dev);
info("az6007_frontend_poweron adap=%p adap->dev=%p", adap, adap->dev);
req = 0xBC;
value = 1;//power on
......@@ -257,7 +263,8 @@ static int az6007_frontend_poweron(struct dvb_usb_adapter *adap)
err("az6007_frontend_poweron failed!!!");
return -EIO;
}
info("az6007_frontend_poweron\n");
info("az6007_frontend_poweron: OK");
return 0;
}
......@@ -269,7 +276,7 @@ static int az6007_frontend_reset(struct dvb_usb_adapter *adap)
u16 index;
int blen;
info("az6007_frontend_reset adap=%p adap->dev=%p\n", adap, adap->dev);
info("az6007_frontend_reset adap=%p adap->dev=%p", adap, adap->dev);
//reset demodulator
req = 0xC0;
......@@ -306,7 +313,7 @@ static int az6007_frontend_reset(struct dvb_usb_adapter *adap)
msleep_interruptible(200);
info("reset az6007 frontend\n");
info("reset az6007 frontend");
return 0;
}
......@@ -367,10 +374,12 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
int result;
BUG_ON(!st);
az6007_frontend_poweron(adap);
az6007_frontend_reset(adap);
info("az6007_frontend_attach\n");
info("az6007_frontend_attach: drxk");
adap->fe = dvb_attach(drxk_attach, &terratec_h7_drxk,
&adap->dev->i2c_adap, &adap->fe2);
......@@ -379,6 +388,8 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
goto out_free;
}
info("Setting hacks");
/* FIXME: do we need a pll semaphore? */
adap->fe->sec_priv = adap;
sema_init(&st->pll_mutex, 1);
......@@ -386,6 +397,7 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
adap->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
adap->fe2->id = 1;
info("az6007_frontend_attach: mt2063");
/* Attach mt2063 to DVB-C frontend */
if (adap->fe->ops.i2c_gate_ctrl)
adap->fe->ops.i2c_gate_ctrl(adap->fe, 1);
......@@ -423,100 +435,95 @@ az6007_usb_disconnect(struct usb_interface *intf)
}
/* I2C */
static int az6007_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
static int az6007_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msgs[],int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int j=0,len=0;
int ret=0;
int i, j, len;
int ret = 0;
u16 index;
u16 value;
int length;
u8 req;
u8 req, addr;
u8 data[512];
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
if (num > 2)
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
if (msg[0].addr == 0xc0) //MT2063
{
if (msg[0].flags != I2C_M_RD) //write
{
//printk("Tuner Tuner Write DevAddr=%02x RegAddr=%d\n", msg[0].addr, msg[0].buf[0]);
req = 0xBD;
index = msg[0].buf[0];
value = msg[0].addr | (1<<8);
length = msg[0].len - 1;
len = msg[0].len - 1;
//printk("Tuner Tuner WriteDATA len=%d ", len);
for(j=0;j<len;j++)
{
data[j] = msg[0].buf[j+1];
//printk("data[%d]=%02x ", j, data[j]);
}
//printk("\n");
ret = az6007_usb_out_op(d,req,value,index,data,length);
//ret = az6007_usb_out_op(d,req,value,index,&(msg[0].buf[1]),length);
}
else //read
{
//printk("Tuner Tuner Read DevAddr=%02x RegAddr=%02x\n", msg[0].addr, msg[0].buf[0]);
req = 0xB9;
index = msg[0].buf[0];
value = msg[0].addr + (1 << 8);
length = msg[1].len + 6;
for (i = 0; i < num; i++) {
addr = msgs[i].addr << 1;
if (((i + 1) < num)
&& (msgs[i].len == 1)
&& (!msgs[i].flags & I2C_M_RD)
&& (msgs[i + 1].flags & I2C_M_RD)
&& (msgs[i].addr == msgs[i + 1].addr)) {
/*
* A write + read xfer for the same address, where
* the first xfer has just 1 byte length.
* Need to join both into one operation
*/
printk("az6007 I2C xfer write+read addr=0x%x len=%d/%d: ",
addr, msgs[i].len, msgs[i + 1].len);
req = 0xb9;
index = 0;
value = addr;
for (j = 0; j < msgs[i].len; j++)
data[j] = msgs[i].buf[j];
length = 6 + msgs[i + 1].len;
len = msgs[i + 1].len;
ret = az6007_usb_in_op(d,req,value,index,data,length);
len = msg[1].len;
//printk("Tuner Tuner ReadDATA len=%d ", len);
for (j=0; j<len; j++)
{
msg[1].buf[j] = data[j+5];
//printk("data[%d]=%02x ", j, data[j+5]);
if (ret >= len) {
for (j = 0; j < len; j++) {
msgs[i + 1].buf[j] = data[j + 5];
printk("0x%02x ", msgs[i + 1].buf[j]);
}
//printk("\n");
}
}
else
{ //Demodulator
if (msg[0].flags != I2C_M_RD) //write
{
//printk("Demodulator Write DevAddr=%02x RegAddr=%d\n", msg[0].addr, msg[0].buf[0]);
req = 0xBD;
index = msg[0].buf[0];
value = msg[0].addr | (1<<8);
length = msg[0].len - 1;
len = msg[0].len - 1;
//printk("Demodulator WriteDATA len=%d ", len);
for(j=0;j<len;j++)
} else
ret = -EIO;
i++;
} else if (!(msgs[i].flags & I2C_M_RD)) {
/* write bytes */
// printk("az6007 I2C xfer write addr=0x%x len=%d: ",
// addr, msgs[i].len);
req = 0xbd;
index = msgs[i].buf[0];
value = addr | (1 << 8);
length = msgs[i].len - 1;
len = msgs[i].len - 1;
// printk("(0x%02x) ", msgs[i].buf[0]);
for (j = 0; j < len; j++)
{
data[j] = msg[0].buf[j+1];
//printk("data[%d]=%02x ", j, data[j]);
data[j] = msgs[i].buf[j + 1];
// printk("0x%02x ", data[j]);
}
//printk("\n");
ret = az6007_usb_out_op(d,req,value,index,data,length);
}
else //read
{
//printk("Demodulator Read DevAddr=%02x RegAddr=%02x\n", msg[0].addr, msg[0].buf[0]);
req = 0xB9;
index = 0;
value = msg[0].addr + (0 << 8);
length = msg[0].len + 6;
} else {
/* read bytes */
// printk("az6007 I2C xfer read addr=0x%x len=%d: ",
// addr, msgs[i].len);
req = 0xb9;
index = msgs[i].buf[0];
value = addr;
length = msgs[i].len + 6;
len = msgs[i].len;
ret = az6007_usb_in_op(d,req,value,index,data,length);
len = msg[0].len;
//printk("Demodulator ReadDATA len=%d ", len);
for (j=0; j<len; j++)
for (j = 0; j < len; j++)
{
msg[0].buf[j] = data[j+5];
//printk("data[%d]=%02x ", j, data[j+5]);
msgs[i].buf[j] = data[j + 5];
// printk("0x%02x ", data[j + 5]);
}
//printk("\n");
}
// printk("\n");
if (ret < 0)
goto err;
}
err:
mutex_unlock(&d->i2c_mutex);
if (ret < 0) {
info("%s ERROR: %i\n", __func__, ret);
return ret;
}
return num;
}
......@@ -540,11 +547,11 @@ int az6007_identify_state(struct usb_device *udev, struct dvb_usb_device_propert
s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
0xb7, USB_TYPE_VENDOR | USB_DIR_IN, 6, 0, b, 6, USB_CTRL_GET_TIMEOUT);
info("FW GET_VERSION length: %d\n",ret);
info("FW GET_VERSION length: %d",ret);
*cold = ret <= 0;
info("cold: %d\n", *cold);
info("cold: %d", *cold);
return 0;
}
......@@ -572,7 +579,6 @@ static struct dvb_usb_device_properties az6007_properties = {
.firmware = "dvb-usb-az6007-03.fw",
.no_reconnect = 1,
.size_of_priv = sizeof(struct az6007_device_state),
.identify_state = az6007_identify_state,
.num_adapters = 1,
.adapter = {
......@@ -593,7 +599,7 @@ static struct dvb_usb_device_properties az6007_properties = {
}
}
},
.size_of_priv = 0,//sizeof(struct az6007_state),
.size_of_priv = sizeof(struct az6007_device_state),
}
},
//.power_ctrl = az6007_power_ctrl,
......@@ -634,7 +640,7 @@ static struct usb_driver az6007_usb_driver = {
static int __init az6007_usb_module_init(void)
{
int result;
info("henry :: az6007 usb module init");
info("az6007 usb module init");
if ((result = usb_register(&az6007_usb_driver))) {
err("usb_register failed. (%d)",result);
return result;
......@@ -646,7 +652,7 @@ static int __init az6007_usb_module_init(void)
static void __exit az6007_usb_module_exit(void)
{
/* deregister this driver from the USB subsystem */
info("henry :: az6007 usb module exit");
info("az6007 usb module exit");
usb_deregister(&az6007_usb_driver);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment