Input: bu21013_ts - convert to using managed resources

This allows trimming error unwinding and device removal handling.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/touchscreen/bu21013_ts.c

@@ -137,7 +137,6 @@
 /**
  * struct bu21013_ts - touch panel data structure
  * @client: pointer to the i2c client
- * @wait: variable to wait_queue_head_t structure
  * @touch_stopped: touch stop flag
  * @chip: pointer to the touch panel controller
  * @in_dev: pointer to the input device structure
@@ -149,7 +148,6 @@
  */
 struct bu21013_ts {
 	struct i2c_client *client;
-	wait_queue_head_t wait;
 	const struct bu21013_platform_device *chip;
 	struct input_dev *in_dev;
 	struct regulator *regulator;
@@ -242,11 +240,13 @@ static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
 			break;
 		}
 
+		if (unlikely(ts->touch_stopped))
+			break;
+
 		keep_polling = gpiod_get_value(ts->int_gpiod);
 		if (keep_polling)
-			wait_event_timeout(ts->wait, ts->touch_stopped,
-					   msecs_to_jiffies(2));
-	} while (keep_polling && !ts->touch_stopped);
+			usleep_range(2000, 2500);
+	} while (keep_polling);
 
 	return IRQ_HANDLED;
 }
@@ -388,20 +388,6 @@ static int bu21013_init_chip(struct bu21013_ts *ts)
 	return 0;
 }
 
-/**
- * bu21013_free_irq() - frees IRQ registered for touchscreen
- * @ts: device structure pointer
- *
- * This function signals interrupt thread to stop processing and
- * frees interrupt.
- */
-static void bu21013_free_irq(struct bu21013_ts *ts)
-{
-	ts->touch_stopped = true;
-	wake_up(&ts->wait);
-	free_irq(ts->irq, ts);
-}
-
 #ifdef CONFIG_OF
 static const struct bu21013_platform_device *
 bu21013_parse_dt(struct device *dev)
@@ -439,6 +425,20 @@ bu21013_parse_dt(struct device *dev)
 }
 #endif
 
+static void bu21013_power_off(void *_ts)
+{
+	struct bu21013_ts *ts = _ts;
+
+	regulator_disable(ts->regulator);
+}
+
+static void bu21013_disable_chip(void *_ts)
+{
+	struct bu21013_ts *ts = _ts;
+
+	gpiod_set_value(ts->cs_gpiod, 0);
+}
+
 static int bu21013_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -460,133 +460,119 @@ static int bu21013_probe(struct i2c_client *client,
 			return PTR_ERR(pdata);
 	}
 
-	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
-	in_dev = input_allocate_device();
-	if (!ts || !in_dev) {
+	ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->chip = pdata;
+	ts->client = client;
+
+	in_dev = devm_input_allocate_device(&client->dev);
+	if (!in_dev) {
 		dev_err(&client->dev, "device memory alloc failed\n");
-		error = -ENOMEM;
-		goto err_free_mem;
+		return -ENOMEM;
 	}
+	ts->in_dev = in_dev;
 
-	/* Named "INT" on the chip, DT binding is "touch" */
-	ts->int_gpiod = gpiod_get(&client->dev, "touch", GPIOD_IN);
-	error = PTR_ERR_OR_ZERO(ts->int_gpiod);
-	if (error) {
-		if (error != -EPROBE_DEFER)
-			dev_err(&client->dev, "failed to get INT GPIO\n");
-		goto err_free_mem;
-	}
-	gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
+	/* register the device to input subsystem */
+	in_dev->name = DRIVER_TP;
+	in_dev->id.bustype = BUS_I2C;
 
-	ts->in_dev = in_dev;
-	ts->chip = pdata;
-	ts->client = client;
-	ts->irq = gpiod_to_irq(ts->int_gpiod);
+	__set_bit(EV_SYN, in_dev->evbit);
+	__set_bit(EV_KEY, in_dev->evbit);
+	__set_bit(EV_ABS, in_dev->evbit);
+
+	input_set_abs_params(in_dev, ABS_MT_POSITION_X,
+			     0, pdata->touch_x_max, 0, 0);
+	input_set_abs_params(in_dev, ABS_MT_POSITION_Y,
+			     0, pdata->touch_y_max, 0, 0);
+	input_set_drvdata(in_dev, ts);
 
-	ts->regulator = regulator_get(&client->dev, "avdd");
+	ts->regulator = devm_regulator_get(&client->dev, "avdd");
 	if (IS_ERR(ts->regulator)) {
 		dev_err(&client->dev, "regulator_get failed\n");
-		error = PTR_ERR(ts->regulator);
-		goto err_put_int_gpio;
+		return PTR_ERR(ts->regulator);
 	}
 
 	error = regulator_enable(ts->regulator);
-	if (error < 0) {
+	if (error) {
 		dev_err(&client->dev, "regulator enable failed\n");
-		goto err_put_regulator;
+		return error;
 	}
 
-	ts->touch_stopped = false;
-	init_waitqueue_head(&ts->wait);
+	error = devm_add_action_or_reset(&client->dev, bu21013_power_off, ts);
+	if (error) {
+		dev_err(&client->dev, "failed to install power off handler\n");
+		return error;
+	}
 
 	/* Named "CS" on the chip, DT binding is "reset" */
-	ts->cs_gpiod = gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+	ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
 	error = PTR_ERR_OR_ZERO(ts->cs_gpiod);
 	if (error) {
 		if (error != -EPROBE_DEFER)
 			dev_err(&client->dev, "failed to get CS GPIO\n");
-		goto err_disable_regulator;
+		return error;
 	}
 	gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
 
+	error = devm_add_action_or_reset(&client->dev,
+					 bu21013_disable_chip, ts);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to install chip disable handler\n");
+		return error;
+	}
+
+	/* Named "INT" on the chip, DT binding is "touch" */
+	ts->int_gpiod = devm_gpiod_get(&client->dev, "touch", GPIOD_IN);
+	error = PTR_ERR_OR_ZERO(ts->int_gpiod);
+	if (error) {
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev, "failed to get INT GPIO\n");
+		return error;
+	}
+	gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
+
 	/* configure the touch panel controller */
 	error = bu21013_init_chip(ts);
 	if (error) {
 		dev_err(&client->dev, "error in bu21013 config\n");
-		goto err_cs_disable;
+		return error;
 	}
 
-	/* register the device to input subsystem */
-	in_dev->name = DRIVER_TP;
-	in_dev->id.bustype = BUS_I2C;
-	in_dev->dev.parent = &client->dev;
-
-	__set_bit(EV_SYN, in_dev->evbit);
-	__set_bit(EV_KEY, in_dev->evbit);
-	__set_bit(EV_ABS, in_dev->evbit);
-
-	input_set_abs_params(in_dev, ABS_MT_POSITION_X,
-			     0, pdata->touch_x_max, 0, 0);
-	input_set_abs_params(in_dev, ABS_MT_POSITION_Y,
-			     0, pdata->touch_y_max, 0, 0);
-	input_set_drvdata(in_dev, ts);
-
-	error = request_threaded_irq(ts->irq, NULL, bu21013_gpio_irq,
-				     IRQF_TRIGGER_FALLING | IRQF_SHARED |
+	ts->irq = gpiod_to_irq(ts->int_gpiod);
+	error = devm_request_threaded_irq(&client->dev, ts->irq,
+					  NULL, bu21013_gpio_irq,
+					  IRQF_TRIGGER_FALLING |
+						IRQF_SHARED |
 						IRQF_ONESHOT,
 					  DRIVER_TP, ts);
 	if (error) {
 		dev_err(&client->dev, "request irq %d failed\n",
 			ts->irq);
-		goto err_cs_disable;
+		return error;
 	}
 
 	error = input_register_device(in_dev);
 	if (error) {
 		dev_err(&client->dev, "failed to register input device\n");
-		goto err_free_irq;
+		return error;
 	}
 
 	device_init_wakeup(&client->dev, pdata->wakeup);
 	i2c_set_clientdata(client, ts);
 
 	return 0;
-
-err_free_irq:
-	bu21013_free_irq(ts);
-err_cs_disable:
-	gpiod_set_value(ts->cs_gpiod, 0);
-	gpiod_put(ts->cs_gpiod);
-err_disable_regulator:
-	regulator_disable(ts->regulator);
-err_put_regulator:
-	regulator_put(ts->regulator);
-err_put_int_gpio:
-	gpiod_put(ts->int_gpiod);
-err_free_mem:
-	input_free_device(in_dev);
-	kfree(ts);
-
-	return error;
 }
 
 static int bu21013_remove(struct i2c_client *client)
 {
 	struct bu21013_ts *ts = i2c_get_clientdata(client);
 
-	bu21013_free_irq(ts);
-
-	gpiod_set_value(ts->cs_gpiod, 0);
-	gpiod_put(ts->cs_gpiod);
-
-	input_unregister_device(ts->in_dev);
-
-	regulator_disable(ts->regulator);
-	regulator_put(ts->regulator);
-
-	gpiod_put(ts->int_gpiod);
-
-	kfree(ts);
+	/* Make sure IRQ will exit quickly even if there is contact */
+	ts->touch_stopped = true;
+	/* The resources will be freed by devm */
 
 	return 0;
 }