Commit cb8ee9f0 authored by Peter Hung's avatar Peter Hung Committed by Greg Kroah-Hartman

serial: Fix io address assign flow with Fintek PCI-to-UART Product

The original driver fixed the io address with 0xe000+idx*8,
but real io address assigned from BIOS is dynamically from
read PCI configure space 0x24, 0x20, 0x1c.

The Fintek F81504/F81508/F81512 maybe malfunction without
this patch and malfunction surely when more then 1 PCI card.
Signed-off-by: default avatarPeter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 2b310ec7
...@@ -1554,25 +1554,48 @@ static int pci_fintek_setup(struct serial_private *priv, ...@@ -1554,25 +1554,48 @@ static int pci_fintek_setup(struct serial_private *priv,
unsigned long iobase; unsigned long iobase;
unsigned long ciobase = 0; unsigned long ciobase = 0;
u8 config_base; u8 config_base;
u32 bar_data[3];
/* /*
* We are supposed to be able to read these from the PCI config space, * Find each UARTs offset in PCI configuraion space
* but the values there don't seem to match what we need to use, so
* just use these hard-coded values for now, as they are correct.
*/ */
switch (idx) { switch (idx) {
case 0: iobase = 0xe000; config_base = 0x40; break; case 0:
case 1: iobase = 0xe008; config_base = 0x48; break; config_base = 0x40;
case 2: iobase = 0xe010; config_base = 0x50; break; break;
case 3: iobase = 0xe018; config_base = 0x58; break; case 1:
case 4: iobase = 0xe020; config_base = 0x60; break; config_base = 0x48;
case 5: iobase = 0xe028; config_base = 0x68; break; break;
case 6: iobase = 0xe030; config_base = 0x70; break; case 2:
case 7: iobase = 0xe038; config_base = 0x78; break; config_base = 0x50;
case 8: iobase = 0xe040; config_base = 0x80; break; break;
case 9: iobase = 0xe048; config_base = 0x88; break; case 3:
case 10: iobase = 0xe050; config_base = 0x90; break; config_base = 0x58;
case 11: iobase = 0xe058; config_base = 0x98; break; break;
case 4:
config_base = 0x60;
break;
case 5:
config_base = 0x68;
break;
case 6:
config_base = 0x70;
break;
case 7:
config_base = 0x78;
break;
case 8:
config_base = 0x80;
break;
case 9:
config_base = 0x88;
break;
case 10:
config_base = 0x90;
break;
case 11:
config_base = 0x98;
break;
default: default:
/* Unknown number of ports, get out of here */ /* Unknown number of ports, get out of here */
return -EINVAL; return -EINVAL;
...@@ -1583,6 +1606,14 @@ static int pci_fintek_setup(struct serial_private *priv, ...@@ -1583,6 +1606,14 @@ static int pci_fintek_setup(struct serial_private *priv,
ciobase = (int)(base + (0x8 * idx)); ciobase = (int)(base + (0x8 * idx));
} }
/* Get the io address dispatch from the BIOS */
pci_read_config_dword(pdev, 0x24, &bar_data[0]);
pci_read_config_dword(pdev, 0x20, &bar_data[1]);
pci_read_config_dword(pdev, 0x1c, &bar_data[2]);
/* Calculate Real IO Port */
iobase = (bar_data[idx/4] & 0xffffffe0) + (idx % 4) * 8;
dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n", dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n",
__func__, idx, iobase, ciobase, config_base); __func__, idx, iobase, ciobase, config_base);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment