clk: tegra20/30: Don't pre-initialize displays parent clock

Both Tegra20 and Tegra30 are initializing display's parent clock
incorrectly because PLLP is running at 216/408MHz while display rate is
set to 600MHz, but pre-setting the parent isn't needed at all because
display driver selects proper parent anyways.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drivers/clk/tegra/clk-tegra20.c

@@ -1046,8 +1046,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_SBC3, TEGRA20_CLK_PLL_P, 100000000, 0 },
 	{ TEGRA20_CLK_SBC4, TEGRA20_CLK_PLL_P, 100000000, 0 },
 	{ TEGRA20_CLK_HOST1X, TEGRA20_CLK_PLL_C, 150000000, 0 },
-	{ TEGRA20_CLK_DISP1, TEGRA20_CLK_PLL_P, 600000000, 0 },
-	{ TEGRA20_CLK_DISP2, TEGRA20_CLK_PLL_P, 600000000, 0 },
 	{ TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },

drivers/clk/tegra/clk-tegra30.c

@@ -1251,8 +1251,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_SBC6, TEGRA30_CLK_PLL_P, 100000000, 0 },
 	{ TEGRA30_CLK_PLL_C, TEGRA30_CLK_CLK_MAX, 600000000, 0 },
 	{ TEGRA30_CLK_HOST1X, TEGRA30_CLK_PLL_C, 150000000, 0 },
-	{ TEGRA30_CLK_DISP1, TEGRA30_CLK_PLL_P, 600000000, 0 },
-	{ TEGRA30_CLK_DISP2, TEGRA30_CLK_PLL_P, 600000000, 0 },
 	{ TEGRA30_CLK_TWD, TEGRA30_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA30_CLK_GR2D, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },