Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [ZLIB]: Fix external builds of zlib_inflate code.
  [TG3]: Fix APE induced regression
  [SKY2]: version 1.19
  [SKY2]: use netdevice stats struct
  [SKY2]: fiber advertise bits initialization (trivial)
  [SKY2]: fix power settings on Yukon XL
  [SKY2]: ethtool register reserved area blackout

drivers/net/sky2.c

@@ -52,7 +52,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.18"
+#define DRV_VERSION		"1.19"
 #define PFX			DRV_NAME " "
 
 /*
@@ -296,10 +296,10 @@ static const u16 copper_fc_adv[] = {
 
 /* flow control to advertise bits when using 1000BaseX */
 static const u16 fiber_fc_adv[] = {
-	[FC_BOTH] = PHY_M_P_BOTH_MD_X,
+	[FC_NONE] = PHY_M_P_NO_PAUSE_X,
 	[FC_TX]   = PHY_M_P_ASYM_MD_X,
 	[FC_RX]	  = PHY_M_P_SYM_MD_X,
-	[FC_NONE] = PHY_M_P_NO_PAUSE_X,
+	[FC_BOTH] = PHY_M_P_BOTH_MD_X,
 };
 
 /* flow control to GMA disable bits */
@@ -606,20 +606,19 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
 {
 	struct pci_dev *pdev = hw->pdev;
 	u32 reg1;
-	static const u32 phy_power[]
-		= { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
-
-	/* looks like this XL is back asswards .. */
-	if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-		onoff = !onoff;
+	static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+	static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
 	pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
+	/* Turn on/off phy power saving */
 	if (onoff)
-		/* Turn off phy power saving */
 		reg1 &= ~phy_power[port];
 	else
 		reg1 |= phy_power[port];
 
+	if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+		reg1 |= coma_mode[port];
+
 	pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
 	pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
 
@@ -1636,8 +1635,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 				printk(KERN_DEBUG "%s: tx done %u\n",
 				       dev->name, idx);
 
-			sky2->net_stats.tx_packets++;
-			sky2->net_stats.tx_bytes += re->skb->len;
+			dev->stats.tx_packets++;
+			dev->stats.tx_bytes += re->skb->len;
 
 			dev_kfree_skb_any(re->skb);
 			sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
@@ -2205,16 +2204,16 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 len_error:
 	/* Truncation of overlength packets
 	   causes PHY length to not match MAC length */
-	++sky2->net_stats.rx_length_errors;
+	++dev->stats.rx_length_errors;
 	if (netif_msg_rx_err(sky2) && net_ratelimit())
 		pr_info(PFX "%s: rx length error: status %#x length %d\n",
 			dev->name, status, length);
 	goto resubmit;
 
 error:
-	++sky2->net_stats.rx_errors;
+	++dev->stats.rx_errors;
 	if (status & GMR_FS_RX_FF_OV) {
-		sky2->net_stats.rx_over_errors++;
+		dev->stats.rx_over_errors++;
 		goto resubmit;
 	}
 
@@ -2223,11 +2222,11 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 		       dev->name, status, length);
 
 	if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
-		sky2->net_stats.rx_length_errors++;
+		dev->stats.rx_length_errors++;
 	if (status & GMR_FS_FRAGMENT)
-		sky2->net_stats.rx_frame_errors++;
+		dev->stats.rx_frame_errors++;
 	if (status & GMR_FS_CRC_ERR)
-		sky2->net_stats.rx_crc_errors++;
+		dev->stats.rx_crc_errors++;
 
 	goto resubmit;
 }
@@ -2272,7 +2271,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			++rx[port];
 			skb = sky2_receive(dev, length, status);
 			if (unlikely(!skb)) {
-				sky2->net_stats.rx_dropped++;
+				dev->stats.rx_dropped++;
 				break;
 			}
 
@@ -2287,8 +2286,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			}
 
 			skb->protocol = eth_type_trans(skb, dev);
-			sky2->net_stats.rx_packets++;
-			sky2->net_stats.rx_bytes += skb->len;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += skb->len;
 			dev->last_rx = jiffies;
 
 #ifdef SKY2_VLAN_TAG_USED
@@ -2479,12 +2478,12 @@ static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
 		gma_read16(hw, port, GM_TX_IRQ_SRC);
 
 	if (status & GM_IS_RX_FF_OR) {
-		++sky2->net_stats.rx_fifo_errors;
+		++dev->stats.rx_fifo_errors;
 		sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
 	}
 
 	if (status & GM_IS_TX_FF_UR) {
-		++sky2->net_stats.tx_fifo_errors;
+		++dev->stats.tx_fifo_errors;
 		sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
 	}
 }
@@ -3223,12 +3222,6 @@ static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
 	}
 }
 
-static struct net_device_stats *sky2_get_stats(struct net_device *dev)
-{
-	struct sky2_port *sky2 = netdev_priv(dev);
-	return &sky2->net_stats;
-}
-
 static int sky2_set_mac_address(struct net_device *dev, void *p)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
@@ -3569,20 +3562,64 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 {
 	const struct sky2_port *sky2 = netdev_priv(dev);
 	const void __iomem *io = sky2->hw->regs;
+	unsigned int b;
 
 	regs->version = 1;
-	memset(p, 0, regs->len);
-
-	memcpy_fromio(p, io, B3_RAM_ADDR);
 
+	for (b = 0; b < 128; b++) {
+		/* This complicated switch statement is to make sure and
+		 * only access regions that are unreserved.
+		 * Some blocks are only valid on dual port cards.
+		 * and block 3 has some special diagnostic registers that
+		 * are poison.
+		 */
+		switch (b) {
+		case 3:
 			/* skip diagnostic ram region */
-	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, 0x2000 - B3_RI_WTO_R1);
+			memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
+			break;
 
-	/* copy GMAC registers */
-	memcpy_fromio(p + BASE_GMAC_1, io + BASE_GMAC_1, 0x1000);
-	if (sky2->hw->ports > 1)
-		memcpy_fromio(p + BASE_GMAC_2, io + BASE_GMAC_2, 0x1000);
+		/* dual port cards only */
+		case 5:		/* Tx Arbiter 2 */
+		case 9: 	/* RX2 */
+		case 14 ... 15:	/* TX2 */
+		case 17: case 19: /* Ram Buffer 2 */
+		case 22 ... 23: /* Tx Ram Buffer 2 */
+		case 25: 	/* Rx MAC Fifo 1 */
+		case 27: 	/* Tx MAC Fifo 2 */
+		case 31:	/* GPHY 2 */
+		case 40 ... 47: /* Pattern Ram 2 */
+		case 52: case 54: /* TCP Segmentation 2 */
+		case 112 ... 116: /* GMAC 2 */
+			if (sky2->hw->ports == 1)
+				goto reserved;
+			/* fall through */
+		case 0:		/* Control */
+		case 2:		/* Mac address */
+		case 4:		/* Tx Arbiter 1 */
+		case 7:		/* PCI express reg */
+		case 8:		/* RX1 */
+		case 12 ... 13: /* TX1 */
+		case 16: case 18:/* Rx Ram Buffer 1 */
+		case 20 ... 21: /* Tx Ram Buffer 1 */
+		case 24: 	/* Rx MAC Fifo 1 */
+		case 26: 	/* Tx MAC Fifo 1 */
+		case 28 ... 29: /* Descriptor and status unit */
+		case 30:	/* GPHY 1*/
+		case 32 ... 39: /* Pattern Ram 1 */
+		case 48: case 50: /* TCP Segmentation 1 */
+		case 56 ... 60:	/* PCI space */
+		case 80 ... 84:	/* GMAC 1 */
+			memcpy_fromio(p, io, 128);
+			break;
+		default:
+reserved:
+			memset(p, 0, 128);
+		}
 
+		p += 128;
+		io += 128;
+	}
 }
 
 /* In order to do Jumbo packets on these chips, need to turn off the
@@ -3934,7 +3971,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	dev->stop = sky2_down;
 	dev->do_ioctl = sky2_ioctl;
 	dev->hard_start_xmit = sky2_xmit_frame;
-	dev->get_stats = sky2_get_stats;
 	dev->set_multicast_list = sky2_set_multicast;
 	dev->set_mac_address = sky2_set_mac_address;
 	dev->change_mtu = sky2_change_mtu;

drivers/net/sky2.h

@@ -2031,8 +2031,6 @@ struct sky2_port {
 #ifdef CONFIG_SKY2_DEBUG
 	struct dentry	     *debugfs;
 #endif
-	struct net_device_stats net_stats;
-
 };
 
 struct sky2_hw {

drivers/net/tg3.c

@@ -6985,6 +6985,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		break;
 	};
 
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
 		/* Write our heartbeat update interval to APE. */
 		tg3_ape_write32(tp, TG3_APE_HOST_HEARTBEAT_INT_MS,
 				APE_HOST_HEARTBEAT_INT_DISABLE);

lib/zlib_inflate/Makefile

@@ -15,5 +15,5 @@
 
 obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate.o
 
-zlib_inflate-objs := inffast.o inflate.o \
+zlib_inflate-objs := inffast.o inflate.o infutil.o \
 		     inftrees.o inflate_syms.o

lib/zlib_inflate/inflate.c

@@ -916,50 +916,3 @@ int zlib_inflateIncomp(z_stream *z)
 
     return Z_OK;
 }
-
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
- * return len or negative error code. */
-int zlib_inflate_blob(void *gunzip_buf, unsigned sz, const void *buf, unsigned len)
-{
-	const u8 *zbuf = buf;
-	struct z_stream_s *strm;
-	int rc;
-
-	rc = -ENOMEM;
-	strm = kmalloc(sizeof(*strm), GFP_KERNEL);
-	if (strm == NULL)
-		goto gunzip_nomem1;
-	strm->workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
-	if (strm->workspace == NULL)
-		goto gunzip_nomem2;
-
-	/* gzip header (1f,8b,08... 10 bytes total + possible asciz filename)
-	 * expected to be stripped from input */
-
-	strm->next_in = zbuf;
-	strm->avail_in = len;
-	strm->next_out = gunzip_buf;
-	strm->avail_out = sz;
-
-	rc = zlib_inflateInit2(strm, -MAX_WBITS);
-	if (rc == Z_OK) {
-		rc = zlib_inflate(strm, Z_FINISH);
-		/* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
-		if (rc == Z_STREAM_END)
-			rc = sz - strm->avail_out;
-		else
-			rc = -EINVAL;
-		zlib_inflateEnd(strm);
-	} else
-		rc = -EINVAL;
-
-	kfree(strm->workspace);
-gunzip_nomem2:
-	kfree(strm);
-gunzip_nomem1:
-	return rc; /* returns Z_OK (0) if successful */
-}

lib/zlib_inflate/infutil.c

+#include <linux/zutil.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
+ * return len or negative error code.
+ */
+int zlib_inflate_blob(void *gunzip_buf, unsigned int sz,
+		      const void *buf, unsigned int len)
+{
+	const u8 *zbuf = buf;
+	struct z_stream_s *strm;
+	int rc;
+
+	rc = -ENOMEM;
+	strm = kmalloc(sizeof(*strm), GFP_KERNEL);
+	if (strm == NULL)
+		goto gunzip_nomem1;
+	strm->workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
+	if (strm->workspace == NULL)
+		goto gunzip_nomem2;
+
+	/* gzip header (1f,8b,08... 10 bytes total + possible asciz filename)
+	 * expected to be stripped from input
+	 */
+	strm->next_in = zbuf;
+	strm->avail_in = len;
+	strm->next_out = gunzip_buf;
+	strm->avail_out = sz;
+
+	rc = zlib_inflateInit2(strm, -MAX_WBITS);
+	if (rc == Z_OK) {
+		rc = zlib_inflate(strm, Z_FINISH);
+		/* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
+		if (rc == Z_STREAM_END)
+			rc = sz - strm->avail_out;
+		else
+			rc = -EINVAL;
+		zlib_inflateEnd(strm);
+	} else
+		rc = -EINVAL;
+
+	kfree(strm->workspace);
+gunzip_nomem2:
+	kfree(strm);
+gunzip_nomem1:
+	return rc; /* returns Z_OK (0) if successful */
+}