Skip to content

L
linux
Commit ccfa7c26 authored by Uwe Kleine-König's avatar Uwe Kleine-König
Browse files
Options

ARM: mx3/mx31ads: fold board header in its only user 

Moreover remove unused definitions.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
parent b396dc45
Show whitespace changes
Inline Side-by-side
Showing with 36 additions and 124 deletions
arch/arm/mach-mx3/mach-mx31ads.c
View file @ ccfa7c26
......@@ -33,7 +33,6 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/board-mx31ads.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
......@@ -45,12 +44,42 @@
#include "devices.h"
/*!
* @file mx31ads.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
/* Offsets for the PBC Controller register */
/* PBC Board interrupt status register */
#define PBC_INTSTATUS 0x000016
/* PBC Board interrupt current status register */
#define PBC_INTCURR_STATUS 0x000018
/* PBC Interrupt mask register set address */
#define PBC_INTMASK_SET 0x00001A
/* PBC Interrupt mask register clear address */
#define PBC_INTMASK_CLEAR 0x00001C
/* External UART A */
#define PBC_SC16C652_UARTA 0x010000
/* External UART B */
#define PBC_SC16C652_UARTB 0x010010
#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
#define MXC_MAX_EXP_IO_LINES 16
/*
* This file contains the board-specific initialization routines.
*/
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
......
arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted 100644 → 0
View file @ b396dc45
/*
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
#include <mach/hardware.h>
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
/* Offsets for the PBC Controller register */
/* PBC Board status register offset */
#define PBC_BSTAT 0x000002
/* PBC Board control register 1 set address */
#define PBC_BCTRL1_SET 0x000004
/* PBC Board control register 1 clear address */
#define PBC_BCTRL1_CLEAR 0x000006
/* PBC Board control register 2 set address */
#define PBC_BCTRL2_SET 0x000008
/* PBC Board control register 2 clear address */
#define PBC_BCTRL2_CLEAR 0x00000A
/* PBC Board control register 3 set address */
#define PBC_BCTRL3_SET 0x00000C
/* PBC Board control register 3 clear address */
#define PBC_BCTRL3_CLEAR 0x00000E
/* PBC Board control register 4 set address */
#define PBC_BCTRL4_SET 0x000010
/* PBC Board control register 4 clear address */
#define PBC_BCTRL4_CLEAR 0x000012
/* PBC Board status register 1 */
#define PBC_BSTAT1 0x000014
/* PBC Board interrupt status register */
#define PBC_INTSTATUS 0x000016
/* PBC Board interrupt current status register */
#define PBC_INTCURR_STATUS 0x000018
/* PBC Interrupt mask register set address */
#define PBC_INTMASK_SET 0x00001A
/* PBC Interrupt mask register clear address */
#define PBC_INTMASK_CLEAR 0x00001C
/* External UART A */
#define PBC_SC16C652_UARTA 0x010000
/* External UART B */
#define PBC_SC16C652_UARTB 0x010010
/* Ethernet Controller IO base address */
#define PBC_CS8900A_IOBASE 0x020000
/* Ethernet Controller Memory base address */
#define PBC_CS8900A_MEMBASE 0x021000
/* Ethernet Controller DMA base address */
#define PBC_CS8900A_DMABASE 0x022000
/* External chip select 0 */
#define PBC_XCS0 0x040000
/* LCD Display enable */
#define PBC_LCD_EN_B 0x060000
/* Code test debug enable */
#define PBC_CODE_B 0x070000
/* PSRAM memory select */
#define PBC_PSRAM_B 0x5000000
#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0)
#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1)
#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3)
#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4)
#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5)
#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6)
#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7)
#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9)
#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12)
#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13)
#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14)
#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15)
#define MXC_MAX_EXP_IO_LINES 16
#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7