irqchip/gic: Prepare for adding platform driver

To support GICs that require runtime power management, it is necessary
to add a platform driver, so that the probing of the chip can be
deferred if resources, such as a power-domain, is not yet available.

To prepare for adding a platform driver:
 1. Drop the __init section from the gic_dist_config() so this can be
    re-used by the platform driver.
 2. Add prototypes for functions required by the platform driver to the
    GIC header file so they can be re-used.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

drivers/irqchip/irq-gic-common.c

@@ -90,8 +90,8 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 	return ret;
 }
 
-void __init gic_dist_config(void __iomem *base, int gic_irqs,
-			    void (*sync_access)(void))
+void gic_dist_config(void __iomem *base, int gic_irqs,
+		     void (*sync_access)(void))
 {
 	unsigned int i;
 

drivers/irqchip/irq-gic.c

@@ -449,7 +449,7 @@ static void gic_cpu_if_up(struct gic_chip_data *gic)
 }
 
 
-static void __init gic_dist_init(struct gic_chip_data *gic)
+static void gic_dist_init(struct gic_chip_data *gic)
 {
 	unsigned int i;
 	u32 cpumask;
@@ -535,7 +535,7 @@ int gic_cpu_if_down(unsigned int gic_nr)
  * this function, no interrupts will be delivered by the GIC, and another
  * platform-specific wakeup source must be enabled.
  */
-static void gic_dist_save(struct gic_chip_data *gic)
+void gic_dist_save(struct gic_chip_data *gic)
 {
 	unsigned int gic_irqs;
 	void __iomem *dist_base;
@@ -574,7 +574,7 @@ static void gic_dist_save(struct gic_chip_data *gic)
  * handled normally, but any edge interrupts that occured will not be seen by
  * the GIC and need to be handled by the platform-specific wakeup source.
  */
-static void gic_dist_restore(struct gic_chip_data *gic)
+void gic_dist_restore(struct gic_chip_data *gic)
 {
 	unsigned int gic_irqs;
 	unsigned int i;
@@ -620,7 +620,7 @@ static void gic_dist_restore(struct gic_chip_data *gic)
 	writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
 }
 
-static void gic_cpu_save(struct gic_chip_data *gic)
+void gic_cpu_save(struct gic_chip_data *gic)
 {
 	int i;
 	u32 *ptr;
@@ -650,7 +650,7 @@ static void gic_cpu_save(struct gic_chip_data *gic)
 
 }
 
-static void gic_cpu_restore(struct gic_chip_data *gic)
+void gic_cpu_restore(struct gic_chip_data *gic)
 {
 	int i;
 	u32 *ptr;
@@ -727,7 +727,7 @@ static struct notifier_block gic_notifier_block = {
 	.notifier_call = gic_notifier,
 };
 
-static int __init gic_pm_init(struct gic_chip_data *gic)
+static int gic_pm_init(struct gic_chip_data *gic)
 {
 	gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
 		sizeof(u32));
@@ -757,7 +757,7 @@ static int __init gic_pm_init(struct gic_chip_data *gic)
 	return -ENOMEM;
 }
 #else
-static int __init gic_pm_init(struct gic_chip_data *gic)
+static int gic_pm_init(struct gic_chip_data *gic)
 {
 	return 0;
 }

include/linux/irqchip/arm-gic.h

@@ -101,9 +101,14 @@
 #include <linux/irqdomain.h>
 
 struct device_node;
+struct gic_chip_data;
 
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 int gic_cpu_if_down(unsigned int gic_nr);
+void gic_cpu_save(struct gic_chip_data *gic);
+void gic_cpu_restore(struct gic_chip_data *gic);
+void gic_dist_save(struct gic_chip_data *gic);
+void gic_dist_restore(struct gic_chip_data *gic);
 
 /*
  * Subdrivers that need some preparatory work can initialize their