Merge tag 'for-linus-20170212' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "MTD updates for 4.11:

  General:
   - new kernel API for retrieving max bad blocks per die (not used yet)
   - track (and expose via sysfs) a partition's device tree node
   - support a "label" device tree property for naming an MTD

  NAND:
   - sunxi: avoid busy-waiting for NAND events
   - ifc: fix ECC handling on IFC v1.0
   - OX820: add explicit dependency on ARCH_OXNAS in Kconfig
   - core: add a new manufacture ID and fix a kernel-doc warning
   - fsmc: kill pdata support
   - lpc32xx_slc: remove unneeded NULL check
   - support dynamic "max bad blocks" detection via ONFI

  SPI NOR:
   - add support for the 4-byte address instruction set
   - add support for new memory parts
   - add support to S3AN memories
   - add support to the Intel SPI controller
   - add support to the Aspeed AST2400 and AST2550 controllers
   - support max SPI message sizes in m25p80_read()
   - fixes for the Candence and Freescale QSPI drivers

  Other:
   - add support for Gemini flash probing
   - bcm47xxsflash: add support for reading outside memory-mapped window
   - bcm47xxparts: extend to support multiple TRX partitions
   - misc fixes and typos

  Extra note: we've pulled in an MFD subtree from Lee Jones as a
  dependency for a new Intel SPI NOR driver"

[ Kudos to Brian for sending pull request a week early:

   "I refuse to acknowledge the existence of 4.10-rc8 and am therefore
    sending our MTD changes for 4.11 now"

  which is all good ]

* tag 'for-linus-20170212' of git://git.infradead.org/linux-mtd: (52 commits)
  mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()
  dt-bindings: mtd: add a common label property to all mtd devices
  mtd: name the mtd device with an optional label property
  mtd: physmap_of: fixup gemini/versatile dependencies
  mtd: spi-nor: cqspi: remove redundant dead code on error return check
  Documentation: mtk-quadspi: update DT bindings
  mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ
  mtd:fsl-quadspi:use the property fields of SPI-NOR
  mtd: spi-nor: Add support for gd25q16
  mtd: spi-nor: Fix S3AN addressing calculation
  mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()
  mtd: spi-nor: add dt support for Everspin MRAMs
  mtd: spi-nor: Add lock/unlock support for f25l32pa
  mtd: spi-nor: add a stateless method to support memory size above 128Mib
  mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  mtd: m25p80: consider max message size in m25p80_read
  mtd: spi-nor: bindings for the Aspeed memory controllers
  mtd: aspeed: add memory controllers for the Aspeed AST2400 SoC
  mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoC
  mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
  ...

Documentation/devicetree/bindings/mtd/aspeed-smc.txt

+* Aspeed Firmware Memory controller
+* Aspeed SPI Flash Memory Controller
+
+The Firmware Memory Controller in the Aspeed AST2500 SoC supports
+three chip selects, two of which are always of SPI type and the third
+can be SPI or NOR type flash. These bindings only describe SPI.
+
+The two SPI flash memory controllers in the AST2500 each support two
+chip selects.
+
+Required properties:
+  - compatible : Should be one of
+	"aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller
+	"aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller
+	"aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller
+	"aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers
+
+  - reg : the first contains the control register location and length,
+          the second contains the memory window mapping address and length
+  - #address-cells : must be 1 corresponding to chip select child binding
+  - #size-cells : must be 0 corresponding to chip select child binding
+
+Optional properties:
+  - interrupts : Should contain the interrupt for the dma device if an
+    FMC
+
+The child nodes are the SPI flash modules which must have a compatible
+property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally, the child node can contain properties for SPI mode (may be
+ignored):
+  - spi-max-frequency - max frequency of spi bus
+
+
+Example:
+fmc: fmc@1e620000 {
+	compatible = "aspeed,ast2500-fmc";
+	reg = < 0x1e620000 0x94
+		0x20000000 0x02000000 >;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <19>;
+	flash@0 {
+		reg = < 0 >;
+		compatible = "jedec,spi-nor";
+		/* spi-max-frequency = <>; */
+		/* m25p,fast-read; */
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/mtd/common.txt

+* Common properties of all MTD devices
+
+Optional properties:
+- label: user-defined MTD device name. Can be used to assign user
+  friendly names to MTD devices (instead of the flash model or flash
+  controller based name) in order to ease flash device identification
+  and/or describe what they are used for.
+
+Example:
+
+	flash@0 {
+		label = "System-firmware";
+
+		/* flash type specific properties */
+	};

Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt

+Flash device on Cortina Systems Gemini SoC
+
+This flash is regular CFI compatible (Intel or AMD extended) flash chips with
+some special bits that can be controlled by the machine's system controller.
+
+Required properties:
+- compatible : must be "cortina,gemini-flash", "cfi-flash";
+- reg : memory address for the flash chip
+- syscon : must be a phandle to the system controller
+- bank-width : width in bytes of flash interface, should be <2>
+
+For the rest of the properties, see mtd-physmap.txt.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+flash@30000000 {
+	compatible = "cortina,gemini-flash", "cfi-flash";
+	reg = <0x30000000 0x01000000>;
+	syscon = <&syscon>;
+	bank-width = <2>;
+};

Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

@@ -14,6 +14,8 @@ Required properties:
                  at25df641
                  at26df081a
                  mr25h256
+                 mr25h10
+                 mr25h40
                  mx25l4005a
                  mx25l1606e
                  mx25l6405d

Documentation/devicetree/bindings/mtd/mtk-quadspi.txt

 * Serial NOR flash controller for MTK MT81xx (and similar)
 
 Required properties:
-- compatible: 	  should be "mediatek,mt8173-nor";
+- compatible: 	  The possible values are:
+		  "mediatek,mt2701-nor"
+		  "mediatek,mt7623-nor"
+		  "mediatek,mt8173-nor"
+		  For mt8173, compatible should be "mediatek,mt8173-nor".
+		  For every other SoC, should contain both the SoC-specific compatible string
+		  and "mediatek,mt8173-nor".
 - reg: 		  physical base address and length of the controller's register
 - clocks: 	  the phandle of the clocks needed by the nor controller
 - clock-names: 	  the names of the clocks

Documentation/mtd/intel-spi.txt

+Upgrading BIOS using intel-spi
+------------------------------
+
+Many Intel CPUs like Baytrail and Braswell include SPI serial flash host
+controller which is used to hold BIOS and other platform specific data.
+Since contents of the SPI serial flash is crucial for machine to function,
+it is typically protected by different hardware protection mechanisms to
+avoid accidental (or on purpose) overwrite of the content.
+
+Not all manufacturers protect the SPI serial flash, mainly because it
+allows upgrading the BIOS image directly from an OS.
+
+The intel-spi driver makes it possible to read and write the SPI serial
+flash, if certain protection bits are not set and locked. If it finds
+any of them set, the whole MTD device is made read-only to prevent
+partial overwrites. By default the driver exposes SPI serial flash
+contents as read-only but it can be changed from kernel command line,
+passing "intel-spi.writeable=1".
+
+Please keep in mind that overwriting the BIOS image on SPI serial flash
+might render the machine unbootable and requires special equipment like
+Dediprog to revive. You have been warned!
+
+Below are the steps how to upgrade MinnowBoard MAX BIOS directly from
+Linux.
+
+ 1) Download and extract the latest Minnowboard MAX BIOS SPI image
+    [1]. At the time writing this the latest image is v92.
+
+ 2) Install mtd-utils package [2]. We need this in order to erase the SPI
+    serial flash. Distros like Debian and Fedora have this prepackaged with
+    name "mtd-utils".
+
+ 3) Add "intel-spi.writeable=1" to the kernel command line and reboot
+    the board (you can also reload the driver passing "writeable=1" as
+    module parameter to modprobe).
+
+ 4) Once the board is up and running again, find the right MTD partition
+    (it is named as "BIOS"):
+
+    # cat /proc/mtd
+    dev:    size   erasesize  name
+    mtd0: 00800000 00001000 "BIOS"
+
+    So here it will be /dev/mtd0 but it may vary.
+
+ 5) Make backup of the existing image first:
+
+    # dd if=/dev/mtd0ro of=bios.bak
+    16384+0 records in
+    16384+0 records out
+    8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
+
+ 6) Verify the backup
+
+    # sha1sum /dev/mtd0ro bios.bak
+    fdbb011920572ca6c991377c4b418a0502668b73  /dev/mtd0ro
+    fdbb011920572ca6c991377c4b418a0502668b73  bios.bak
+
+    The SHA1 sums must match. Otherwise do not continue any further!
+
+ 7) Erase the SPI serial flash. After this step, do not reboot the
+    board! Otherwise it will not start anymore.
+
+    # flash_erase /dev/mtd0 0 0
+    Erasing 4 Kibyte @ 7ff000 -- 100 % complete
+
+ 8) Once completed without errors you can write the new BIOS image:
+
+    # dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0
+
+ 9) Verify that the new content of the SPI serial flash matches the new
+    BIOS image:
+
+    # sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
+    9b4df9e4be2057fceec3a5529ec3d950836c87a2  /dev/mtd0ro
+    9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
+
+    The SHA1 sums should match.
+
+ 10) Now you can reboot your board and observe the new BIOS starting up
+     properly.
+
+References
+----------
+
+[1] https://firmware.intel.com/sites/default/files/MinnowBoard.MAX_.X64.92.R01.zip
+[2] http://www.linux-mtd.infradead.org/

drivers/mfd/lpc_ich.c

@@ -56,6 +56,7 @@
  *	document number TBD : Wildcat Point-LP
  *	document number TBD : 9 Series
  *	document number TBD : Lewisburg
+ *	document number TBD : Apollo Lake SoC
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -83,6 +84,17 @@
 #define ACPIBASE_GCS_OFF	0x3410
 #define ACPIBASE_GCS_END	0x3414
 
+#define SPIBASE_BYT		0x54
+#define SPIBASE_BYT_SZ		512
+#define SPIBASE_BYT_EN		BIT(1)
+
+#define SPIBASE_LPT		0x3800
+#define SPIBASE_LPT_SZ		512
+#define BCR			0xdc
+#define BCR_WPD			BIT(0)
+
+#define SPIBASE_APL_SZ		4096
+
 #define GPIOBASE_ICH0		0x58
 #define GPIOCTRL_ICH0		0x5C
 #define GPIOBASE_ICH6		0x48
@@ -133,6 +145,12 @@ static struct resource gpio_ich_res[] = {
 	},
 };
 
+static struct resource intel_spi_res[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	}
+};
+
 static struct mfd_cell lpc_ich_wdt_cell = {
 	.name = "iTCO_wdt",
 	.num_resources = ARRAY_SIZE(wdt_ich_res),
@@ -147,6 +165,14 @@ static struct mfd_cell lpc_ich_gpio_cell = {
 	.ignore_resource_conflicts = true,
 };
 
+
+static struct mfd_cell lpc_ich_spi_cell = {
+	.name = "intel-spi",
+	.num_resources = ARRAY_SIZE(intel_spi_res),
+	.resources = intel_spi_res,
+	.ignore_resource_conflicts = true,
+};
+
 /* chipset related info */
 enum lpc_chipsets {
 	LPC_ICH = 0,	/* ICH */
@@ -216,6 +242,7 @@ enum lpc_chipsets {
 	LPC_BRASWELL,	/* Braswell SoC */
 	LPC_LEWISBURG,	/* Lewisburg */
 	LPC_9S,		/* 9 Series */
+	LPC_APL,	/* Apollo Lake SoC */
 };
 
 static struct lpc_ich_info lpc_chipset_info[] = {
@@ -494,10 +521,12 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Lynx Point",
 		.iTCO_version = 2,
 		.gpio_version = ICH_V5_GPIO,
+		.spi_type = INTEL_SPI_LPT,
 	},
 	[LPC_LPT_LP] = {
 		.name = "Lynx Point_LP",
 		.iTCO_version = 2,
+		.spi_type = INTEL_SPI_LPT,
 	},
 	[LPC_WBG] = {
 		.name = "Wellsburg",
@@ -511,6 +540,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 	[LPC_BAYTRAIL] = {
 		.name = "Bay Trail SoC",
 		.iTCO_version = 3,
+		.spi_type = INTEL_SPI_BYT,
 	},
 	[LPC_COLETO] = {
 		.name = "Coleto Creek",
@@ -519,10 +549,12 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 	[LPC_WPT_LP] = {
 		.name = "Wildcat Point_LP",
 		.iTCO_version = 2,
+		.spi_type = INTEL_SPI_LPT,
 	},
 	[LPC_BRASWELL] = {
 		.name = "Braswell SoC",
 		.iTCO_version = 3,
+		.spi_type = INTEL_SPI_BYT,
 	},
 	[LPC_LEWISBURG] = {
 		.name = "Lewisburg",
@@ -533,6 +565,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.iTCO_version = 2,
 		.gpio_version = ICH_V5_GPIO,
 	},
+	[LPC_APL] = {
+		.name = "Apollo Lake SoC",
+		.spi_type = INTEL_SPI_BXT,
+	},
 };
 
 /*
@@ -681,6 +717,7 @@ static const struct pci_device_id lpc_ich_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x3b14), LPC_3420},
 	{ PCI_VDEVICE(INTEL, 0x3b16), LPC_3450},
 	{ PCI_VDEVICE(INTEL, 0x5031), LPC_EP80579},
+	{ PCI_VDEVICE(INTEL, 0x5ae8), LPC_APL},
 	{ PCI_VDEVICE(INTEL, 0x8c40), LPC_LPT},
 	{ PCI_VDEVICE(INTEL, 0x8c41), LPC_LPT},
 	{ PCI_VDEVICE(INTEL, 0x8c42), LPC_LPT},
@@ -1056,6 +1093,94 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
 	return ret;
 }
 
+static int lpc_ich_init_spi(struct pci_dev *dev)
+{
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+	struct resource *res = &intel_spi_res[0];
+	struct intel_spi_boardinfo *info;
+	u32 spi_base, rcba, bcr;
+
+	info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->type = lpc_chipset_info[priv->chipset].spi_type;
+
+	switch (info->type) {
+	case INTEL_SPI_BYT:
+		pci_read_config_dword(dev, SPIBASE_BYT, &spi_base);
+		if (spi_base & SPIBASE_BYT_EN) {
+			res->start = spi_base & ~(SPIBASE_BYT_SZ - 1);
+			res->end = res->start + SPIBASE_BYT_SZ - 1;
+		}
+		break;
+
+	case INTEL_SPI_LPT:
+		pci_read_config_dword(dev, RCBABASE, &rcba);
+		if (rcba & 1) {
+			spi_base = round_down(rcba, SPIBASE_LPT_SZ);
+			res->start = spi_base + SPIBASE_LPT;
+			res->end = res->start + SPIBASE_LPT_SZ - 1;
+
+			/*
+			 * Try to make the flash chip writeable now by
+			 * setting BCR_WPD. It it fails we tell the driver
+			 * that it can only read the chip.
+			 */
+			pci_read_config_dword(dev, BCR, &bcr);
+			if (!(bcr & BCR_WPD)) {
+				bcr |= BCR_WPD;
+				pci_write_config_dword(dev, BCR, bcr);
+				pci_read_config_dword(dev, BCR, &bcr);
+			}
+			info->writeable = !!(bcr & BCR_WPD);
+		}
+		break;
+
+	case INTEL_SPI_BXT: {
+		unsigned int p2sb = PCI_DEVFN(13, 0);
+		unsigned int spi = PCI_DEVFN(13, 2);
+		struct pci_bus *bus = dev->bus;
+
+		/*
+		 * The P2SB is hidden by BIOS and we need to unhide it in
+		 * order to read BAR of the SPI flash device. Once that is
+		 * done we hide it again.
+		 */
+		pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x0);
+		pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0,
+					  &spi_base);
+		if (spi_base != ~0) {
+			res->start = spi_base & 0xfffffff0;
+			res->end = res->start + SPIBASE_APL_SZ - 1;
+
+			pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+			if (!(bcr & BCR_WPD)) {
+				bcr |= BCR_WPD;
+				pci_bus_write_config_dword(bus, spi, BCR, bcr);
+				pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+			}
+			info->writeable = !!(bcr & BCR_WPD);
+		}
+
+		pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1);
+		break;
+	}
+
+	default:
+		return -EINVAL;
+	}
+
+	if (!res->start)
+		return -ENODEV;
+
+	lpc_ich_spi_cell.platform_data = info;
+	lpc_ich_spi_cell.pdata_size = sizeof(*info);
+
+	return mfd_add_devices(&dev->dev, PLATFORM_DEVID_NONE,
+			       &lpc_ich_spi_cell, 1, NULL, 0, NULL);
+}
+
 static int lpc_ich_probe(struct pci_dev *dev,
 				const struct pci_device_id *id)
 {
@@ -1099,6 +1224,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
 			cell_added = true;
 	}
 
+	if (lpc_chipset_info[priv->chipset].spi_type) {
+		ret = lpc_ich_init_spi(dev);
+		if (!ret)
+			cell_added = true;
+	}
+
 	/*
 	 * We only care if at least one or none of the cells registered
 	 * successfully.

drivers/mtd/bcm47xxpart.c

@@ -9,6 +9,7 @@
  *
  */
 
+#include <linux/bcm47xx_nvram.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -83,6 +84,91 @@ static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
 	return "rootfs";
 }
 
+static int bcm47xxpart_parse_trx(struct mtd_info *master,
+				 struct mtd_partition *trx,
+				 struct mtd_partition *parts,
+				 size_t parts_len)
+{
+	struct trx_header header;
+	size_t bytes_read;
+	int curr_part = 0;
+	int i, err;
+
+	if (parts_len < 3) {
+		pr_warn("No enough space to add TRX partitions!\n");
+		return -ENOMEM;
+	}
+
+	err = mtd_read(master, trx->offset, sizeof(header), &bytes_read,
+		       (uint8_t *)&header);
+	if (err && !mtd_is_bitflip(err)) {
+		pr_err("mtd_read error while reading TRX header: %d\n", err);
+		return err;
+	}
+
+	i = 0;
+
+	/* We have LZMA loader if offset[2] points to sth */
+	if (header.offset[2]) {
+		bcm47xxpart_add_part(&parts[curr_part++], "loader",
+				     trx->offset + header.offset[i], 0);
+		i++;
+	}
+
+	if (header.offset[i]) {
+		bcm47xxpart_add_part(&parts[curr_part++], "linux",
+				     trx->offset + header.offset[i], 0);
+		i++;
+	}
+
+	if (header.offset[i]) {
+		size_t offset = trx->offset + header.offset[i];
+		const char *name = bcm47xxpart_trx_data_part_name(master,
+								  offset);
+
+		bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0);
+		i++;
+	}
+
+	/*
+	 * Assume that every partition ends at the beginning of the one it is
+	 * followed by.
+	 */
+	for (i = 0; i < curr_part; i++) {
+		u64 next_part_offset = (i < curr_part - 1) ?
+					parts[i + 1].offset :
+					trx->offset + trx->size;
+
+		parts[i].size = next_part_offset - parts[i].offset;
+	}
+
+	return curr_part;
+}
+
+/**
+ * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
+ *
+ * Some devices may have more than one TRX partition. In such case one of them
+ * is the main one and another a failsafe one. Bootloader may fallback to the
+ * failsafe firmware if it detects corruption of the main image.
+ *
+ * This function provides info about currently used TRX partition. It's the one
+ * containing kernel started by the bootloader.
+ */
+static int bcm47xxpart_bootpartition(void)
+{
+	char buf[4];
+	int bootpartition;
+
+	/* Check CFE environment variable */
+	if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) {
+		if (!kstrtoint(buf, 0, &bootpartition))
+			return bootpartition;
+	}
+
+	return 0;
+}
+
 static int bcm47xxpart_parse(struct mtd_info *master,
 			     const struct mtd_partition **pparts,
 			     struct mtd_part_parser_data *data)
@@ -93,9 +179,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 	size_t bytes_read;
 	uint32_t offset;
 	uint32_t blocksize = master->erasesize;
-	struct trx_header *trx;
-	int trx_part = -1;
-	int last_trx_part = -1;
+	int trx_parts[2]; /* Array with indexes of TRX partitions */
+	int trx_num = 0; /* Number of found TRX partitions */
 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
 	int err;
 
@@ -182,54 +267,18 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 
 		/* TRX */
 		if (buf[0x000 / 4] == TRX_MAGIC) {
-			if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
-				pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
-				break;
-			}
-
-			trx = (struct trx_header *)buf;
+			struct trx_header *trx;
 
-			trx_part = curr_part;
+			if (trx_num >= ARRAY_SIZE(trx_parts))
+				pr_warn("No enough space to store another TRX found at 0x%X\n",
+					offset);
+			else
+				trx_parts[trx_num++] = curr_part;
 			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
 					     offset, 0);
 
-			i = 0;
-			/* We have LZMA loader if offset[2] points to sth */
-			if (trx->offset[2]) {
-				bcm47xxpart_add_part(&parts[curr_part++],
-						     "loader",
-						     offset + trx->offset[i],
-						     0);
-				i++;
-			}
-
-			if (trx->offset[i]) {
-				bcm47xxpart_add_part(&parts[curr_part++],
-						     "linux",
-						     offset + trx->offset[i],
-						     0);
-				i++;
-			}
-
-			/*
-			 * Pure rootfs size is known and can be calculated as:
-			 * trx->length - trx->offset[i]. We don't fill it as
-			 * we want to have jffs2 (overlay) in the same mtd.
-			 */
-			if (trx->offset[i]) {
-				const char *name;
-
-				name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
-				bcm47xxpart_add_part(&parts[curr_part++],
-						     name,
-						     offset + trx->offset[i],
-						     0);
-				i++;
-			}
-
-			last_trx_part = curr_part - 1;
-
 			/* Jump to the end of TRX */
+			trx = (struct trx_header *)buf;
 			offset = roundup(offset + trx->length, blocksize);
 			/* Next loop iteration will increase the offset */
 			offset -= blocksize;
@@ -307,9 +356,23 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 				       parts[i + 1].offset : master->size;
 
 		parts[i].size = next_part_offset - parts[i].offset;
-		if (i == last_trx_part && trx_part >= 0)
-			parts[trx_part].size = next_part_offset -
-					       parts[trx_part].offset;
+	}
+
+	/* If there was TRX parse it now */
+	for (i = 0; i < trx_num; i++) {
+		struct mtd_partition *trx = &parts[trx_parts[i]];
+
+		if (i == bcm47xxpart_bootpartition()) {
+			int num_parts;
+
+			num_parts = bcm47xxpart_parse_trx(master, trx,
+							  parts + curr_part,
+							  BCM47XXPART_MAX_PARTS - curr_part);
+			if (num_parts > 0)
+				curr_part += num_parts;
+		} else {
+			trx->name = "failsafe";
+		}
 	}
 
 	*pparts = parts;

drivers/mtd/devices/bcm47xxsflash.c

@@ -105,15 +105,33 @@ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 			      size_t *retlen, u_char *buf)
 {
 	struct bcm47xxsflash *b47s = mtd->priv;
+	size_t orig_len = len;
 
 	/* Check address range */
 	if ((from + len) > mtd->size)
 		return -EINVAL;
 
-	memcpy_fromio(buf, b47s->window + from, len);
-	*retlen = len;
+	/* Read as much as possible using fast MMIO window */
+	if (from < BCM47XXSFLASH_WINDOW_SZ) {
+		size_t memcpy_len;
 
-	return len;
+		memcpy_len = min(len, (size_t)(BCM47XXSFLASH_WINDOW_SZ - from));
+		memcpy_fromio(buf, b47s->window + from, memcpy_len);
+		from += memcpy_len;
+		len -= memcpy_len;
+		buf += memcpy_len;
+	}
+
+	/* Use indirect access for content out of the window */
+	for (; len; len--) {
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, from++);
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_READ4B);
+		*buf++ = b47s->cc_read(b47s, BCMA_CC_FLASHDATA);
+	}
+
+	*retlen = orig_len;
+
+	return orig_len;
 }
 
 static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
@@ -284,7 +302,6 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
 	b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL);
 	if (!b47s)
 		return -ENOMEM;
-	sflash->priv = b47s;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -334,6 +351,8 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
 	b47s->size = sflash->size;
 	bcm47xxsflash_fill_mtd(b47s, &pdev->dev);
 
+	platform_set_drvdata(pdev, b47s);
+
 	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
 	if (err) {
 		pr_err("Failed to register MTD device: %d\n", err);
@@ -349,8 +368,7 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
 
 static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
 {
-	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
-	struct bcm47xxsflash *b47s = sflash->priv;
+	struct bcm47xxsflash *b47s = platform_get_drvdata(pdev);
 
 	mtd_device_unregister(&b47s->mtd);
 	iounmap(b47s->window);

drivers/mtd/devices/bcm47xxsflash.h

@@ -3,6 +3,8 @@
 
 #include <linux/mtd/mtd.h>
 
+#define BCM47XXSFLASH_WINDOW_SZ			SZ_16M
+
 /* Used for ST flashes only. */
 #define OPCODE_ST_WREN		0x0006		/* Write Enable */
 #define OPCODE_ST_WRDIS		0x0004		/* Write Disable */
@@ -16,6 +18,7 @@
 #define OPCODE_ST_RES		0x03ab		/* Read Electronic Signature */
 #define OPCODE_ST_CSA		0x1000		/* Keep chip select asserted */
 #define OPCODE_ST_SSE		0x0220		/* Sub-sector Erase */
+#define OPCODE_ST_READ4B	0x6313		/* Read Data Bytes in 4Byte addressing mode */
 
 /* Used for Atmel flashes only. */
 #define OPCODE_AT_READ				0x07e8

drivers/mtd/devices/m25p80.c

@@ -172,7 +172,8 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 
 	t[1].rx_buf = buf;
 	t[1].rx_nbits = m25p80_rx_nbits(nor);
-	t[1].len = min(len, spi_max_transfer_size(spi));
+	t[1].len = min3(len, spi_max_transfer_size(spi),
+			spi_max_message_size(spi) - t[0].len);
 	spi_message_add_tail(&t[1], &m);
 
 	ret = spi_sync(spi, &m);
@@ -288,7 +289,6 @@ static const struct spi_device_id m25p_ids[] = {
 	 * should be kept for backward compatibility.
 	 */
 	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
-	{"mr25h256"},
 	{"mx25l4005a"},	{"mx25l1606e"},	{"mx25l6405d"},	{"mx25l12805d"},
 	{"mx25l25635e"},{"mx66l51235l"},
 	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q512a"},
@@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = {
 	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
 	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
 
+	/* Everspin MRAMs (non-JEDEC) */
+	{ "mr25h256" }, /* 256 Kib, 40 MHz */
+	{ "mr25h10" },  /*   1 Mib, 40 MHz */
+	{ "mr25h40" },  /*   4 Mib, 40 MHz */
+
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, m25p_ids);

drivers/mtd/devices/serial_flash_cmds.h

@@ -18,19 +18,12 @@
 #define SPINOR_OP_RDVCR		0x85
 
 /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
-#define SPINOR_OP_READ_1_2_2	0xbb	/* DUAL I/O READ */
-#define SPINOR_OP_READ_1_4_4	0xeb	/* QUAD I/O READ */
-
 #define SPINOR_OP_WRITE		0x02	/* PAGE PROGRAM */
 #define SPINOR_OP_WRITE_1_1_2	0xa2	/* DUAL INPUT PROGRAM */
 #define SPINOR_OP_WRITE_1_2_2	0xd2	/* DUAL INPUT EXT PROGRAM */
 #define SPINOR_OP_WRITE_1_1_4	0x32	/* QUAD INPUT PROGRAM */
 #define SPINOR_OP_WRITE_1_4_4	0x12	/* QUAD INPUT EXT PROGRAM */
 
-/* READ commands with 32-bit addressing */
-#define SPINOR_OP_READ4_1_2_2	0xbc
-#define SPINOR_OP_READ4_1_4_4	0xec
-
 /* Configuration flags */
 #define FLASH_FLAG_SINGLE	0x000000ff
 #define FLASH_FLAG_READ_WRITE	0x00000001

drivers/mtd/devices/st_spi_fsm.c

@@ -507,12 +507,12 @@ static struct seq_rw_config n25q_read3_configs[] = {
  *	- 'FAST' variants configured for 8 dummy cycles (see note above.)
  */
 static struct seq_rw_config n25q_read4_configs[] = {
-	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4,	0, 4, 4, 0x00, 0, 8},
-	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4,	0, 1, 4, 0x00, 0, 8},
-	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2,	0, 2, 2, 0x00, 0, 8},
-	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2,	0, 1, 2, 0x00, 0, 8},
-	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ4_FAST,	0, 1, 1, 0x00, 0, 8},
-	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4,	0, 1, 1, 0x00, 0, 0},
+	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ_FAST_4B,  0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B,       0, 1, 1, 0x00, 0, 0},
 	{0x00,			0,                       0, 0, 0, 0x00, 0, 0},
 };
 
@@ -553,12 +553,12 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
  * entering a state that is incompatible with the SPIBoot Controller.
  */
 static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
-	{FLASH_FLAG_READ_1_4_4,  SPINOR_OP_READ4_1_4_4,  0, 4, 4, 0x00, 2, 4},
-	{FLASH_FLAG_READ_1_1_4,  SPINOR_OP_READ4_1_1_4,  0, 1, 4, 0x00, 0, 8},
-	{FLASH_FLAG_READ_1_2_2,  SPINOR_OP_READ4_1_2_2,  0, 2, 2, 0x00, 4, 0},
-	{FLASH_FLAG_READ_1_1_2,  SPINOR_OP_READ4_1_1_2,  0, 1, 2, 0x00, 0, 8},
-	{FLASH_FLAG_READ_FAST,   SPINOR_OP_READ4_FAST,   0, 1, 1, 0x00, 0, 8},
-	{FLASH_FLAG_READ_WRITE,  SPINOR_OP_READ4,        0, 1, 1, 0x00, 0, 0},
+	{FLASH_FLAG_READ_1_4_4,  SPINOR_OP_READ_1_4_4_4B,  0, 4, 4, 0x00, 2, 4},
+	{FLASH_FLAG_READ_1_1_4,  SPINOR_OP_READ_1_1_4_4B,  0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2,  SPINOR_OP_READ_1_2_2_4B,  0, 2, 2, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_1_2,  SPINOR_OP_READ_1_1_2_4B,  0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,   SPINOR_OP_READ_FAST_4B,   0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE,  SPINOR_OP_READ_4B,        0, 1, 1, 0x00, 0, 0},
 	{0x00,                   0,                        0, 0, 0, 0x00, 0, 0},
 };
 

drivers/mtd/maps/Kconfig

@@ -75,7 +75,7 @@ config MTD_PHYSMAP_OF
 	  taken from OF device tree.
 
 config MTD_PHYSMAP_OF_VERSATILE
-	bool "Support ARM Versatile physmap OF"
+	bool "ARM Versatile OF-based physical memory map handling"
 	depends on MTD_PHYSMAP_OF
 	depends on MFD_SYSCON
 	default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW)
@@ -84,6 +84,16 @@ config MTD_PHYSMAP_OF_VERSATILE
 	  platforms, basically to add a VPP (write protection) callback so
 	  the flash can be taken out of write protection.
 
+config MTD_PHYSMAP_OF_GEMINI
+	bool "Cortina Gemini OF-based physical memory map handling"
+	depends on MTD_PHYSMAP_OF
+	depends on MFD_SYSCON
+	default ARCH_GEMINI
+	help
+	  This provides some extra DT physmap parsing for the Gemini
+	  platforms, some detection and setting up parallel mode on the
+	  external interface.
+
 config MTD_PMC_MSP_EVM
 	tristate "CFI Flash device mapped on PMC-Sierra MSP"
 	depends on PMC_MSP && MTD_CFI

drivers/mtd/maps/Makefile

@@ -17,10 +17,13 @@ obj-$(CONFIG_MTD_CK804XROM)	+= ck804xrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
-obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
 ifdef CONFIG_MTD_PHYSMAP_OF_VERSATILE
-obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of_versatile.o
+physmap_of-objs += physmap_of_versatile.o
+endif
+ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI
+physmap_of-objs += physmap_of_gemini.o
 endif
+obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
 obj-$(CONFIG_MTD_PISMO)		+= pismo.o
 obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o

drivers/mtd/maps/ichxrom.c

@@ -57,9 +57,11 @@ static void ichxrom_cleanup(struct ichxrom_window *window)
 {
 	struct ichxrom_map_info *map, *scratch;
 	u16 word;
+	int ret;
 
 	/* Disable writes through the rom window */
-	pci_read_config_word(window->pdev, BIOS_CNTL, &word);
+	ret = pci_read_config_word(window->pdev, BIOS_CNTL, &word);
+	if (!ret)
 		pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1);
 	pci_dev_put(window->pdev);
 

drivers/mtd/maps/lantiq-flash.c

@@ -4,7 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2010 John Crispin <john@phrozen.org>
  */
 
 #include <linux/err.h>
@@ -209,5 +209,5 @@ static struct platform_driver ltq_mtd_driver = {
 module_platform_driver(ltq_mtd_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
 MODULE_DESCRIPTION("Lantiq SoC NOR");

drivers/mtd/maps/physmap_of.c

@@ -24,6 +24,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
+#include "physmap_of_gemini.h"
 #include "physmap_of_versatile.h"
 
 struct of_flash_list {
@@ -241,11 +242,13 @@ static int of_flash_probe(struct platform_device *dev)
 		info->list[i].map.size = res_size;
 		info->list[i].map.bankwidth = be32_to_cpup(width);
 		info->list[i].map.device_node = dp;
+
+		err = of_flash_probe_gemini(dev, dp, &info->list[i].map);
+		if (err)
+			return err;
 		err = of_flash_probe_versatile(dev, dp, &info->list[i].map);
-		if (err) {
-			dev_err(&dev->dev, "Can't probe Versatile VPP\n");
+		if (err)
 			return err;
-		}
 
 		err = -ENOMEM;
 		info->list[i].map.virt = ioremap(info->list[i].map.phys,

drivers/mtd/maps/physmap_of_gemini.c

+/*
+ * Cortina Systems Gemini OF physmap add-on
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This SoC has an elaborate flash control register, so we need to
+ * detect and set it up when booting on this platform.
+ */
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mtd/map.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "physmap_of_gemini.h"
+
+/*
+ * The Flash-relevant parts of the global status register
+ * These would also be relevant for a NAND driver.
+ */
+#define GLOBAL_STATUS			0x04
+#define FLASH_TYPE_MASK			(0x3 << 24)
+#define FLASH_TYPE_NAND_2K		(0x3 << 24)
+#define FLASH_TYPE_NAND_512		(0x2 << 24)
+#define FLASH_TYPE_PARALLEL		(0x1 << 24)
+#define FLASH_TYPE_SERIAL		(0x0 << 24)
+/* if parallel */
+#define FLASH_WIDTH_16BIT		(1 << 23)	/* else 8 bit */
+/* if serial */
+#define FLASH_ATMEL			(1 << 23)	/* else STM */
+
+#define FLASH_SIZE_MASK			(0x3 << 21)
+#define NAND_256M			(0x3 << 21)	/* and more */
+#define NAND_128M			(0x2 << 21)
+#define NAND_64M			(0x1 << 21)
+#define NAND_32M			(0x0 << 21)
+#define ATMEL_16M			(0x3 << 21)	/* and more */
+#define ATMEL_8M			(0x2 << 21)
+#define ATMEL_4M_2M			(0x1 << 21)
+#define ATMEL_1M			(0x0 << 21)	/* and less */
+#define STM_32M				(1 << 22)	/* and more */
+#define STM_16M				(0 << 22)	/* and less */
+
+#define FLASH_PARALLEL_HIGH_PIN_CNT	(1 << 20)	/* else low pin cnt */
+
+/* Miscellaneous Control Register */
+#define GLOBAL_MISC_CTRL		0x30
+#define FLASH_PADS_MASK			0x07
+#define NAND_PADS_DISABLE		BIT(2)
+#define PFLASH_PADS_DISABLE		BIT(1)
+#define SFLASH_PADS_DISABLE		BIT(0)
+
+static const struct of_device_id syscon_match[] = {
+	{ .compatible = "cortina,gemini-syscon" },
+	{ },
+};
+
+int of_flash_probe_gemini(struct platform_device *pdev,
+			  struct device_node *np,
+			  struct map_info *map)
+{
+	static struct regmap *rmap;
+	struct device *dev = &pdev->dev;
+	u32 val;
+	int ret;
+
+	/* Multiplatform guard */
+	if (!of_device_is_compatible(np, "cortina,gemini-flash"))
+		return 0;
+
+	rmap = syscon_regmap_lookup_by_phandle(np, "syscon");
+	if (IS_ERR(rmap)) {
+		dev_err(dev, "no syscon\n");
+		return PTR_ERR(rmap);
+	}
+
+	ret = regmap_read(rmap, GLOBAL_STATUS, &val);
+	if (ret) {
+		dev_err(dev, "failed to read global status register\n");
+		return -ENODEV;
+	}
+	dev_dbg(dev, "global status reg: %08x\n", val);
+
+	/*
+	 * It would be contradictory if a physmap flash was NOT parallel.
+	 */
+	if ((val & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL) {
+		dev_err(dev, "flash is not parallel\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Complain if DT data and hardware definition is different.
+	 */
+	if (val & FLASH_WIDTH_16BIT) {
+		if (map->bankwidth != 2)
+			dev_warn(dev, "flash hardware say flash is 16 bit wide but DT says it is %d bits wide\n",
+				 map->bankwidth * 8);
+	} else {
+		if (map->bankwidth != 1)
+			dev_warn(dev, "flash hardware say flash is 8 bit wide but DT says it is %d bits wide\n",
+				 map->bankwidth * 8);
+	}
+
+	/* Activate parallel (NOR flash) mode */
+	ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL,
+				 FLASH_PADS_MASK,
+				 SFLASH_PADS_DISABLE | NAND_PADS_DISABLE);
+	if (ret) {
+		dev_err(dev, "unable to set up physmap pads\n");
+		return -ENODEV;
+	}
+
+	dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n");
+
+	return 0;
+}

drivers/mtd/maps/physmap_of_gemini.h

+#include <linux/of.h>
+#include <linux/mtd/map.h>
+
+#ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI
+int of_flash_probe_gemini(struct platform_device *pdev,
+			  struct device_node *np,
+			  struct map_info *map);
+#else
+static inline
+int of_flash_probe_gemini(struct platform_device *pdev,
+			  struct device_node *np,
+			  struct map_info *map)
+{
+	return 0;
+}
+#endif

drivers/mtd/maps/physmap_of_versatile.c

@@ -252,4 +252,3 @@ int of_flash_probe_versatile(struct platform_device *pdev,
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(of_flash_probe_versatile);

drivers/mtd/maps/pmcmsp-flash.c

@@ -139,15 +139,13 @@ static int __init init_msp_flash(void)
 		}
 
 		msp_maps[i].bankwidth = 1;
-		msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+		msp_maps[i].name = kstrndup(flash_name, 7, GFP_KERNEL);
 		if (!msp_maps[i].name) {
 			iounmap(msp_maps[i].virt);
 			kfree(msp_parts[i]);
 			goto cleanup_loop;
 		}
 
-		msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
-
 		for (j = 0; j < pcnt; j++) {
 			part_name[5] = '0' + i;
 			part_name[7] = '0' + j;

drivers/mtd/mtdchar.c

@@ -451,7 +451,7 @@ static int mtdchar_readoob(struct file *file, struct mtd_info *mtd,
 	 * data. For our userspace tools it is important to dump areas
 	 * with ECC errors!
 	 * For kernel internal usage it also might return -EUCLEAN
-	 * to signal the caller that a bitflip has occured and has
+	 * to signal the caller that a bitflip has occurred and has
 	 * been corrected by the ECC algorithm.
 	 *
 	 * Note: currently the standard NAND function, nand_read_oob_std,

drivers/mtd/mtdcore.c

@@ -1128,7 +1128,7 @@ EXPORT_SYMBOL_GPL(mtd_write_oob);
  * @oobecc: OOB region struct filled with the appropriate ECC position
  *	    information
  *
- * This functions return ECC section information in the OOB area. I you want
+ * This function returns ECC section information in the OOB area. If you want
  * to get all the ECC bytes information, then you should call
  * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE.
  *
@@ -1160,7 +1160,7 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
  * @oobfree: OOB region struct filled with the appropriate free position
  *	     information
  *
- * This functions return free bytes position in the OOB area. I you want
+ * This function returns free bytes position in the OOB area. If you want
  * to get all the free bytes information, then you should call
  * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE.
  *
@@ -1190,7 +1190,7 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_free);
  * @iter: iterator function. Should be either mtd_ooblayout_free or
  *	  mtd_ooblayout_ecc depending on the region type you're searching for
  *
- * This functions returns the section id and oobregion information of a
+ * This function returns the section id and oobregion information of a
  * specific byte. For example, say you want to know where the 4th ECC byte is
  * stored, you'll use:
  *

drivers/mtd/mtdpart.c

@@ -349,6 +349,14 @@ static const struct mtd_ooblayout_ops part_ooblayout_ops = {
 	.free = part_ooblayout_free,
 };
 
+static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_part *part = mtd_to_part(mtd);
+
+	return part->master->_max_bad_blocks(part->master,
+					     ofs + part->offset, len);
+}
+
 static inline void free_partition(struct mtd_part *p)
 {
 	kfree(p->mtd.name);
@@ -424,6 +432,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
 				&master->dev :
 				master->dev.parent;
+	slave->mtd.dev.of_node = part->of_node;
 
 	slave->mtd._read = part_read;
 	slave->mtd._write = part_write;
@@ -475,6 +484,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 		slave->mtd._block_isbad = part_block_isbad;
 	if (master->_block_markbad)
 		slave->mtd._block_markbad = part_block_markbad;
+	if (master->_max_bad_blocks)
+		slave->mtd._max_bad_blocks = part_max_bad_blocks;
 
 	if (master->_get_device)
 		slave->mtd._get_device = part_get_device;

drivers/mtd/nand/Kconfig

@@ -426,6 +426,7 @@ config MTD_NAND_ORION
 
 config MTD_NAND_OXNAS
 	tristate "NAND Flash support for Oxford Semiconductor SoC"
+	depends on ARCH_OXNAS || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables the NAND flash controller on Oxford Semiconductor SoCs.
@@ -535,6 +536,7 @@ config MTD_NAND_JZ4780
 
 config MTD_NAND_FSMC
 	tristate "Support for NAND on ST Micros FSMC"
+	depends on OF
 	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
 	help
 	  Enables support for NAND Flash chips on the ST Microelectronics

drivers/mtd/nand/fsl_ifc_nand.c

@@ -258,9 +258,15 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
 		int bufnum = nctrl->page & priv->bufnum_mask;
 		int sector = bufnum * chip->ecc.steps;
 		int sector_end = sector + chip->ecc.steps - 1;
+		__be32 *eccstat_regs;
+
+		if (ctrl->version >= FSL_IFC_VERSION_2_0_0)
+			eccstat_regs = ifc->ifc_nand.v2_nand_eccstat;
+		else
+			eccstat_regs = ifc->ifc_nand.v1_nand_eccstat;
 
 		for (i = sector / 4; i <= sector_end / 4; i++)
-			eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);
+			eccstat[i] = ifc_in32(&eccstat_regs[i]);
 
 		for (i = sector; i <= sector_end; i++) {
 			errors = check_read_ecc(mtd, ctrl, eccstat, i);

drivers/mtd/nand/fsmc_nand.c

@@ -35,10 +35,133 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/mtd/fsmc.h>
 #include <linux/amba/bus.h>
 #include <mtd/mtd-abi.h>
 
+#define FSMC_NAND_BW8		1
+#define FSMC_NAND_BW16		2
+
+#define FSMC_MAX_NOR_BANKS	4
+#define FSMC_MAX_NAND_BANKS	4
+
+#define FSMC_FLASH_WIDTH8	1
+#define FSMC_FLASH_WIDTH16	2
+
+/* fsmc controller registers for NOR flash */
+#define CTRL			0x0
+	/* ctrl register definitions */
+	#define BANK_ENABLE		(1 << 0)
+	#define MUXED			(1 << 1)
+	#define NOR_DEV			(2 << 2)
+	#define WIDTH_8			(0 << 4)
+	#define WIDTH_16		(1 << 4)
+	#define RSTPWRDWN		(1 << 6)
+	#define WPROT			(1 << 7)
+	#define WRT_ENABLE		(1 << 12)
+	#define WAIT_ENB		(1 << 13)
+
+#define CTRL_TIM		0x4
+	/* ctrl_tim register definitions */
+
+#define FSMC_NOR_BANK_SZ	0x8
+#define FSMC_NOR_REG_SIZE	0x40
+
+#define FSMC_NOR_REG(base, bank, reg)		(base + \
+						FSMC_NOR_BANK_SZ * (bank) + \
+						reg)
+
+/* fsmc controller registers for NAND flash */
+#define PC			0x00
+	/* pc register definitions */
+	#define FSMC_RESET		(1 << 0)
+	#define FSMC_WAITON		(1 << 1)
+	#define FSMC_ENABLE		(1 << 2)
+	#define FSMC_DEVTYPE_NAND	(1 << 3)
+	#define FSMC_DEVWID_8		(0 << 4)
+	#define FSMC_DEVWID_16		(1 << 4)
+	#define FSMC_ECCEN		(1 << 6)
+	#define FSMC_ECCPLEN_512	(0 << 7)
+	#define FSMC_ECCPLEN_256	(1 << 7)
+	#define FSMC_TCLR_1		(1)
+	#define FSMC_TCLR_SHIFT		(9)
+	#define FSMC_TCLR_MASK		(0xF)
+	#define FSMC_TAR_1		(1)
+	#define FSMC_TAR_SHIFT		(13)
+	#define FSMC_TAR_MASK		(0xF)
+#define STS			0x04
+	/* sts register definitions */
+	#define FSMC_CODE_RDY		(1 << 15)
+#define COMM			0x08
+	/* comm register definitions */
+	#define FSMC_TSET_0		0
+	#define FSMC_TSET_SHIFT		0
+	#define FSMC_TSET_MASK		0xFF
+	#define FSMC_TWAIT_6		6
+	#define FSMC_TWAIT_SHIFT	8
+	#define FSMC_TWAIT_MASK		0xFF
+	#define FSMC_THOLD_4		4
+	#define FSMC_THOLD_SHIFT	16
+	#define FSMC_THOLD_MASK		0xFF
+	#define FSMC_THIZ_1		1
+	#define FSMC_THIZ_SHIFT		24
+	#define FSMC_THIZ_MASK		0xFF
+#define ATTRIB			0x0C
+#define IOATA			0x10
+#define ECC1			0x14
+#define ECC2			0x18
+#define ECC3			0x1C
+#define FSMC_NAND_BANK_SZ	0x20
+
+#define FSMC_NAND_REG(base, bank, reg)		(base + FSMC_NOR_REG_SIZE + \
+						(FSMC_NAND_BANK_SZ * (bank)) + \
+						reg)
+
+#define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
+
+struct fsmc_nand_timings {
+	uint8_t tclr;
+	uint8_t tar;
+	uint8_t thiz;
+	uint8_t thold;
+	uint8_t twait;
+	uint8_t tset;
+};
+
+enum access_mode {
+	USE_DMA_ACCESS = 1,
+	USE_WORD_ACCESS,
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @nand_timings: timing setup for the physical NAND interface
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+	struct fsmc_nand_timings *nand_timings;
+	struct mtd_partition	*partitions;
+	unsigned int		nr_partitions;
+	unsigned int		options;
+	unsigned int		width;
+	unsigned int		bank;
+
+	enum access_mode	mode;
+
+	void			(*select_bank)(uint32_t bank, uint32_t busw);
+
+	/* priv structures for dma accesses */
+	void			*read_dma_priv;
+	void			*write_dma_priv;
+};
+
 static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
 				   struct mtd_oob_region *oobregion)
 {
@@ -714,7 +837,6 @@ static bool filter(struct dma_chan *chan, void *slave)
 	return true;
 }
 
-#ifdef CONFIG_OF
 static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
 				     struct device_node *np)
 {
@@ -757,13 +879,6 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
 	}
 	return 0;
 }
-#else
-static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
-				     struct device_node *np)
-{
-	return -ENOSYS;
-}
-#endif
 
 /*
  * fsmc_nand_probe - Probe function
@@ -782,20 +897,16 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	u32 pid;
 	int i;
 
-	if (np) {
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
 	pdev->dev.platform_data = pdata;
 	ret = fsmc_nand_probe_config_dt(pdev, np);
 	if (ret) {
 		dev_err(&pdev->dev, "no platform data\n");
 		return -ENODEV;
 	}
-	}
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "platform data is NULL\n");
-		return -EINVAL;
-	}
 
 	/* Allocate memory for the device structure (and zero it) */
 	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);

drivers/mtd/nand/lpc32xx_slc.c

@@ -797,22 +797,17 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	struct resource *rc;
 	int res;
 
-	rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (rc == NULL) {
-		dev_err(&pdev->dev, "No memory resource found for device\n");
-		return -EBUSY;
-	}
-
 	/* Allocate memory for the device structure (and zero it) */
 	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
 	if (!host)
 		return -ENOMEM;
-	host->io_base_dma = rc->start;
 
+	rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	host->io_base = devm_ioremap_resource(&pdev->dev, rc);
 	if (IS_ERR(host->io_base))
 		return PTR_ERR(host->io_base);
 
+	host->io_base_dma = rc->start;
 	if (pdev->dev.of_node)
 		host->ncfg = lpc32xx_parse_dt(&pdev->dev);
 	if (!host->ncfg) {

drivers/mtd/nand/mtk_nand.c

@@ -1383,7 +1383,6 @@ static int mtk_nfc_probe(struct platform_device *pdev)
 	nfc->regs = devm_ioremap_resource(dev, res);
 	if (IS_ERR(nfc->regs)) {
 		ret = PTR_ERR(nfc->regs);
-		dev_err(dev, "no nfi base\n");
 		goto release_ecc;
 	}
 

drivers/mtd/nand/nand_base.c

@@ -3262,6 +3262,42 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	return nand_block_markbad_lowlevel(mtd, ofs);
 }
 
+/**
+ * nand_max_bad_blocks - [MTD Interface] Max number of bad blocks for an mtd
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ * @len: length of mtd
+ */
+static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	u32 part_start_block;
+	u32 part_end_block;
+	u32 part_start_die;
+	u32 part_end_die;
+
+	/*
+	 * max_bb_per_die and blocks_per_die used to determine
+	 * the maximum bad block count.
+	 */
+	if (!chip->max_bb_per_die || !chip->blocks_per_die)
+		return -ENOTSUPP;
+
+	/* Get the start and end of the partition in erase blocks. */
+	part_start_block = mtd_div_by_eb(ofs, mtd);
+	part_end_block = mtd_div_by_eb(len, mtd) + part_start_block - 1;
+
+	/* Get the start and end LUNs of the partition. */
+	part_start_die = part_start_block / chip->blocks_per_die;
+	part_end_die = part_end_block / chip->blocks_per_die;
+
+	/*
+	 * Look up the bad blocks per unit and multiply by the number of units
+	 * that the partition spans.
+	 */
+	return chip->max_bb_per_die * (part_end_die - part_start_die + 1);
+}
+
 /**
  * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
  * @mtd: MTD device structure
@@ -3592,6 +3628,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
 	chip->bits_per_cell = p->bits_per_cell;
 
+	chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
+	chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
+
 	if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
 		*busw = NAND_BUSWIDTH_16;
 	else
@@ -4815,6 +4854,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->_block_isreserved = nand_block_isreserved;
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
+	mtd->_max_bad_blocks = nand_max_bad_blocks;
 	mtd->writebufsize = mtd->writesize;
 
 	/*

drivers/mtd/nand/nand_ids.c

@@ -185,6 +185,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_SANDISK, "SanDisk"},
 	{NAND_MFR_INTEL, "Intel"},
 	{NAND_MFR_ATO, "ATO"},
+	{NAND_MFR_WINBOND, "Winbond"},
 	{0x0, "Unknown"}
 };
 

drivers/mtd/nand/sunxi_nand.c

@@ -321,6 +321,10 @@ static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events,
 
 		ret = wait_for_completion_timeout(&nfc->complete,
 						msecs_to_jiffies(timeout_ms));
+		if (!ret)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
 
 		writel(0, nfc->regs + NFC_REG_INT);
 	} else {
@@ -518,6 +522,8 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	u32 tmp;
 
 	while (len > offs) {
+		bool poll = false;
+
 		cnt = min(len - offs, NFC_SRAM_SIZE);
 
 		ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -528,7 +534,11 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
 		writel(tmp, nfc->regs + NFC_REG_CMD);
 
-		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+		/* Arbitrary limit for polling mode */
+		if (cnt < 64)
+			poll = true;
+
+		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
 		if (ret)
 			break;
 
@@ -551,6 +561,8 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 	u32 tmp;
 
 	while (len > offs) {
+		bool poll = false;
+
 		cnt = min(len - offs, NFC_SRAM_SIZE);
 
 		ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -563,7 +575,11 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 		      NFC_ACCESS_DIR;
 		writel(tmp, nfc->regs + NFC_REG_CMD);
 
-		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+		/* Arbitrary limit for polling mode */
+		if (cnt < 64)
+			poll = true;
+
+		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
 		if (ret)
 			break;
 
@@ -588,10 +604,6 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
 	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
 	int ret;
 
-	ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
-	if (ret)
-		return;
-
 	if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) &&
 	    !(ctrl & (NAND_CLE | NAND_ALE))) {
 		u32 cmd = 0;
@@ -621,6 +633,10 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
 			writel(sunxi_nand->addr[1],
 			       nfc->regs + NFC_REG_ADDR_HIGH);
 
+		ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+		if (ret)
+			return;
+
 		writel(cmd, nfc->regs + NFC_REG_CMD);
 		sunxi_nand->addr[0] = 0;
 		sunxi_nand->addr[1] = 0;
@@ -957,7 +973,7 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
 	writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	sunxi_nfc_randomizer_disable(mtd);
 	if (ret)
 		return ret;
@@ -1069,7 +1085,7 @@ static int sunxi_nfc_hw_ecc_read_chunks_dma(struct mtd_info *mtd, uint8_t *buf,
 	writel(NFC_PAGE_OP | NFC_DATA_SWAP_METHOD | NFC_DATA_TRANS,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	if (ret)
 		dmaengine_terminate_all(nfc->dmac);
 
@@ -1189,7 +1205,7 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
 	       NFC_ACCESS_DIR | NFC_ECC_OP,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	sunxi_nfc_randomizer_disable(mtd);
 	if (ret)
 		return ret;
@@ -1428,7 +1444,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
 	       NFC_DATA_TRANS | NFC_ACCESS_DIR,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	if (ret)
 		dmaengine_terminate_all(nfc->dmac);
 

drivers/mtd/nand/xway_nand.c

@@ -3,7 +3,7 @@
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
  *
- *  Copyright © 2012 John Crispin <blogic@openwrt.org>
+ *  Copyright © 2012 John Crispin <john@phrozen.org>
  *  Copyright © 2016 Hauke Mehrtens <hauke@hauke-m.de>
  */
 

drivers/mtd/ofpart.c

@@ -108,6 +108,7 @@ static int parse_ofpart_partitions(struct mtd_info *master,
 
 		parts[i].offset = of_read_number(reg, a_cells);
 		parts[i].size = of_read_number(reg + a_cells, s_cells);
+		parts[i].of_node = pp;
 
 		partname = of_get_property(pp, "label", &len);
 		if (!partname)

drivers/mtd/spi-nor/Kconfig

@@ -29,6 +29,16 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 	  Please note that some tools/drivers/filesystems may not work with
 	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
 
+config SPI_ASPEED_SMC
+	tristate "Aspeed flash controllers in SPI mode"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  This enables support for the Firmware Memory controller (FMC)
+	  in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
+	  and support for the SPI flash memory controller (SPI) for
+	  the host firmware. The implementation only supports SPI NOR.
+
 config SPI_ATMEL_QUADSPI
 	tristate "Atmel Quad SPI Controller"
 	depends on ARCH_AT91 || (ARM && COMPILE_TEST)
@@ -40,7 +50,7 @@ config SPI_ATMEL_QUADSPI
 
 config SPI_CADENCE_QUADSPI
 	tristate "Cadence Quad SPI controller"
-	depends on OF && ARM
+	depends on OF && (ARM || COMPILE_TEST)
 	help
 	  Enable support for the Cadence Quad SPI Flash controller.
 
@@ -76,4 +86,24 @@ config SPI_NXP_SPIFI
 	  Flash. Enable this option if you have a device with a SPIFI
 	  controller and want to access the Flash as a mtd device.
 
+config SPI_INTEL_SPI
+	tristate
+
+config SPI_INTEL_SPI_PLATFORM
+	tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT
+	depends on X86
+	select SPI_INTEL_SPI
+	help
+	  This enables platform support for the Intel PCH/PCU SPI
+	  controller in master mode. This controller is present in modern
+	  Intel hardware and is used to hold BIOS and other persistent
+	  settings. Using this driver it is possible to upgrade BIOS
+	  directly from Linux.
+
+	  Say N here unless you know what you are doing. Overwriting the
+	  SPI flash may render the system unbootable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-spi-platform.
+
 endif # MTD_SPI_NOR

drivers/mtd/spi-nor/Makefile

 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
+obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
 obj-$(CONFIG_SPI_ATMEL_QUADSPI)	+= atmel-quadspi.o
 obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
 obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
 obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
 obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
 obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
+obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
+obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o

drivers/mtd/spi-nor/cadence-quadspi.c

@@ -526,7 +526,8 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor,
 			bytes_to_read *= cqspi->fifo_width;
 			bytes_to_read = bytes_to_read > remaining ?
 					remaining : bytes_to_read;
-			readsl(ahb_base, rxbuf, DIV_ROUND_UP(bytes_to_read, 4));
+			ioread32_rep(ahb_base, rxbuf,
+				     DIV_ROUND_UP(bytes_to_read, 4));
 			rxbuf += bytes_to_read;
 			remaining -= bytes_to_read;
 			bytes_to_read = cqspi_get_rd_sram_level(cqspi);
@@ -610,7 +611,8 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor,
 
 	while (remaining > 0) {
 		write_bytes = remaining > page_size ? page_size : remaining;
-		writesl(cqspi->ahb_base, txbuf, DIV_ROUND_UP(write_bytes, 4));
+		iowrite32_rep(cqspi->ahb_base, txbuf,
+			      DIV_ROUND_UP(write_bytes, 4));
 
 		ret = wait_for_completion_timeout(&cqspi->transfer_complete,
 						  msecs_to_jiffies
@@ -891,7 +893,7 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
 	if (ret)
 		return ret;
 
-	return (ret < 0) ? ret : len;
+	return len;
 }
 
 static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
@@ -911,7 +913,7 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
 	if (ret)
 		return ret;
 
-	return (ret < 0) ? ret : len;
+	return len;
 }
 
 static int cqspi_erase(struct spi_nor *nor, loff_t offs)

drivers/mtd/spi-nor/fsl-quadspi.c

@@ -193,7 +193,7 @@
 #define QUADSPI_LUT_NUM		64
 
 /* SEQID -- we can have 16 seqids at most. */
-#define SEQID_QUAD_READ		0
+#define SEQID_READ		0
 #define SEQID_WREN		1
 #define SEQID_WRDI		2
 #define SEQID_RDSR		3
@@ -373,32 +373,26 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	void __iomem *base = q->iobase;
 	int rxfifo = q->devtype_data->rxfifo;
 	u32 lut_base;
-	u8 cmd, addrlen, dummy;
 	int i;
 
+	struct spi_nor *nor = &q->nor[0];
+	u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
+	u8 read_op = nor->read_opcode;
+	u8 read_dm = nor->read_dummy;
+
 	fsl_qspi_unlock_lut(q);
 
 	/* Clear all the LUT table */
 	for (i = 0; i < QUADSPI_LUT_NUM; i++)
 		qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
 
-	/* Quad Read */
-	lut_base = SEQID_QUAD_READ * 4;
-
-	if (q->nor_size <= SZ_16M) {
-		cmd = SPINOR_OP_READ_1_1_4;
-		addrlen = ADDR24BIT;
-		dummy = 8;
-	} else {
-		/* use the 4-byte address */
-		cmd = SPINOR_OP_READ_1_1_4;
-		addrlen = ADDR32BIT;
-		dummy = 8;
-	}
+	/* Read */
+	lut_base = SEQID_READ * 4;
 
-	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+	qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
+		    LUT1(FSL_READ, PAD4, rxfifo),
 			base + QUADSPI_LUT(lut_base + 1));
 
 	/* Write enable */
@@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	/* Page Program */
 	lut_base = SEQID_PP * 4;
 
-	if (q->nor_size <= SZ_16M) {
-		cmd = SPINOR_OP_PP;
-		addrlen = ADDR24BIT;
-	} else {
-		/* use the 4-byte address */
-		cmd = SPINOR_OP_PP;
-		addrlen = ADDR32BIT;
-	}
-
-	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) |
+		    LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
 	qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
 			base + QUADSPI_LUT(lut_base + 1));
@@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	/* Erase a sector */
 	lut_base = SEQID_SE * 4;
 
-	cmd = q->nor[0].erase_opcode;
-	addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
-
-	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) |
+		    LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Erase the whole chip */
@@ -484,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
 {
 	switch (cmd) {
 	case SPINOR_OP_READ_1_1_4:
-		return SEQID_QUAD_READ;
+		return SEQID_READ;
 	case SPINOR_OP_WREN:
 		return SEQID_WREN;
 	case SPINOR_OP_WRDI:

drivers/mtd/spi-nor/intel-spi-platform.c

+/*
+ * Intel PCH/PCU SPI flash platform driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "intel-spi.h"
+
+static int intel_spi_platform_probe(struct platform_device *pdev)
+{
+	struct intel_spi_boardinfo *info;
+	struct intel_spi *ispi;
+	struct resource *mem;
+
+	info = dev_get_platdata(&pdev->dev);
+	if (!info)
+		return -EINVAL;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ispi = intel_spi_probe(&pdev->dev, mem, info);
+	if (IS_ERR(ispi))
+		return PTR_ERR(ispi);
+
+	platform_set_drvdata(pdev, ispi);
+	return 0;
+}
+
+static int intel_spi_platform_remove(struct platform_device *pdev)
+{
+	struct intel_spi *ispi = platform_get_drvdata(pdev);
+
+	return intel_spi_remove(ispi);
+}
+
+static struct platform_driver intel_spi_platform_driver = {
+	.probe = intel_spi_platform_probe,
+	.remove = intel_spi_platform_remove,
+	.driver = {
+		.name = "intel-spi",
+	},
+};
+
+module_platform_driver(intel_spi_platform_driver);
+
+MODULE_DESCRIPTION("Intel PCH/PCU SPI flash platform driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:intel-spi");

drivers/mtd/spi-nor/intel-spi.h

+/*
+ * Intel PCH/PCU SPI flash driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef INTEL_SPI_H
+#define INTEL_SPI_H
+
+#include <linux/platform_data/intel-spi.h>
+
+struct intel_spi;
+struct resource;
+
+struct intel_spi *intel_spi_probe(struct device *dev,
+	struct resource *mem, const struct intel_spi_boardinfo *info);
+int intel_spi_remove(struct intel_spi *ispi);
+
+#endif /* INTEL_SPI_H */

drivers/spi/spi-bcm-qspi.c

@@ -371,7 +371,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
 			/* default mode, does not need flex_cmd */
 			flex_mode = 0;
 		else
-			command = SPINOR_OP_READ4_FAST;
+			command = SPINOR_OP_READ_FAST_4B;
 		break;
 	case SPI_NBITS_DUAL:
 		bpc = 0x00000001;
@@ -384,7 +384,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
 		} else {
 			command = SPINOR_OP_READ_1_1_2;
 			if (spans_4byte)
-				command = SPINOR_OP_READ4_1_1_2;
+				command = SPINOR_OP_READ_1_1_2_4B;
 		}
 		break;
 	case SPI_NBITS_QUAD:
@@ -399,7 +399,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
 		} else {
 			command = SPINOR_OP_READ_1_1_4;
 			if (spans_4byte)
-				command = SPINOR_OP_READ4_1_1_4;
+				command = SPINOR_OP_READ_1_1_4_4B;
 		}
 		break;
 	default:

include/linux/bcma/bcma_driver_chipcommon.h

@@ -593,9 +593,6 @@ struct bcma_sflash {
 	u32 blocksize;
 	u16 numblocks;
 	u32 size;
-
-	struct mtd_info *mtd;
-	void *priv;
 };
 #endif
 

include/linux/fsl_ifc.h

@@ -733,8 +733,12 @@ struct fsl_ifc_nand {
 	__be32 nand_erattr1;
 	u32 res19[0x10];
 	__be32 nand_fsr;
-	u32 res20[0x3];
-	__be32 nand_eccstat[6];
+	u32 res20;
+	/* The V1 nand_eccstat is actually 4 words that overlaps the
+	 * V2 nand_eccstat.
+	 */
+	__be32 v1_nand_eccstat[2];
+	__be32 v2_nand_eccstat[6];
 	u32 res21[0x1c];
 	__be32 nanndcr;
 	u32 res22[0x2];

include/linux/mfd/lpc_ich.h

@@ -20,6 +20,8 @@
 #ifndef LPC_ICH_H
 #define LPC_ICH_H
 
+#include <linux/platform_data/intel-spi.h>
+
 /* GPIO resources */
 #define ICH_RES_GPIO	0
 #define ICH_RES_GPE0	1
@@ -40,6 +42,7 @@ struct lpc_ich_info {
 	char name[32];
 	unsigned int iTCO_version;
 	unsigned int gpio_version;
+	enum intel_spi_type spi_type;
 	u8 use_gpio;
 };
 

include/linux/mtd/fsmc.h

-/*
- * incude/mtd/fsmc.h
- *
- * ST Microelectronics
- * Flexible Static Memory Controller (FSMC)
- * platform data interface and header file
- *
- * Copyright © 2010 ST Microelectronics
- * Vipin Kumar <vipin.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MTD_FSMC_H
-#define __MTD_FSMC_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/types.h>
-#include <linux/mtd/partitions.h>
-#include <asm/param.h>
-
-#define FSMC_NAND_BW8		1
-#define FSMC_NAND_BW16		2
-
-#define FSMC_MAX_NOR_BANKS	4
-#define FSMC_MAX_NAND_BANKS	4
-
-#define FSMC_FLASH_WIDTH8	1
-#define FSMC_FLASH_WIDTH16	2
-
-/* fsmc controller registers for NOR flash */
-#define CTRL			0x0
-	/* ctrl register definitions */
-	#define BANK_ENABLE		(1 << 0)
-	#define MUXED			(1 << 1)
-	#define NOR_DEV			(2 << 2)
-	#define WIDTH_8			(0 << 4)
-	#define WIDTH_16		(1 << 4)
-	#define RSTPWRDWN		(1 << 6)
-	#define WPROT			(1 << 7)
-	#define WRT_ENABLE		(1 << 12)
-	#define WAIT_ENB		(1 << 13)
-
-#define CTRL_TIM		0x4
-	/* ctrl_tim register definitions */
-
-#define FSMC_NOR_BANK_SZ	0x8
-#define FSMC_NOR_REG_SIZE	0x40
-
-#define FSMC_NOR_REG(base, bank, reg)		(base + \
-						FSMC_NOR_BANK_SZ * (bank) + \
-						reg)
-
-/* fsmc controller registers for NAND flash */
-#define PC			0x00
-	/* pc register definitions */
-	#define FSMC_RESET		(1 << 0)
-	#define FSMC_WAITON		(1 << 1)
-	#define FSMC_ENABLE		(1 << 2)
-	#define FSMC_DEVTYPE_NAND	(1 << 3)
-	#define FSMC_DEVWID_8		(0 << 4)
-	#define FSMC_DEVWID_16		(1 << 4)
-	#define FSMC_ECCEN		(1 << 6)
-	#define FSMC_ECCPLEN_512	(0 << 7)
-	#define FSMC_ECCPLEN_256	(1 << 7)
-	#define FSMC_TCLR_1		(1)
-	#define FSMC_TCLR_SHIFT		(9)
-	#define FSMC_TCLR_MASK		(0xF)
-	#define FSMC_TAR_1		(1)
-	#define FSMC_TAR_SHIFT		(13)
-	#define FSMC_TAR_MASK		(0xF)
-#define STS			0x04
-	/* sts register definitions */
-	#define FSMC_CODE_RDY		(1 << 15)
-#define COMM			0x08
-	/* comm register definitions */
-	#define FSMC_TSET_0		0
-	#define FSMC_TSET_SHIFT		0
-	#define FSMC_TSET_MASK		0xFF
-	#define FSMC_TWAIT_6		6
-	#define FSMC_TWAIT_SHIFT	8
-	#define FSMC_TWAIT_MASK		0xFF
-	#define FSMC_THOLD_4		4
-	#define FSMC_THOLD_SHIFT	16
-	#define FSMC_THOLD_MASK		0xFF
-	#define FSMC_THIZ_1		1
-	#define FSMC_THIZ_SHIFT		24
-	#define FSMC_THIZ_MASK		0xFF
-#define ATTRIB			0x0C
-#define IOATA			0x10
-#define ECC1			0x14
-#define ECC2			0x18
-#define ECC3			0x1C
-#define FSMC_NAND_BANK_SZ	0x20
-
-#define FSMC_NAND_REG(base, bank, reg)		(base + FSMC_NOR_REG_SIZE + \
-						(FSMC_NAND_BANK_SZ * (bank)) + \
-						reg)
-
-#define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
-
-struct fsmc_nand_timings {
-	uint8_t tclr;
-	uint8_t tar;
-	uint8_t thiz;
-	uint8_t thold;
-	uint8_t twait;
-	uint8_t tset;
-};
-
-enum access_mode {
-	USE_DMA_ACCESS = 1,
-	USE_WORD_ACCESS,
-};
-
-/**
- * fsmc_nand_platform_data - platform specific NAND controller config
- * @nand_timings: timing setup for the physical NAND interface
- * @partitions: partition table for the platform, use a default fallback
- * if this is NULL
- * @nr_partitions: the number of partitions in the previous entry
- * @options: different options for the driver
- * @width: bus width
- * @bank: default bank
- * @select_bank: callback to select a certain bank, this is
- * platform-specific. If the controller only supports one bank
- * this may be set to NULL
- */
-struct fsmc_nand_platform_data {
-	struct fsmc_nand_timings *nand_timings;
-	struct mtd_partition	*partitions;
-	unsigned int		nr_partitions;
-	unsigned int		options;
-	unsigned int		width;
-	unsigned int		bank;
-
-	enum access_mode	mode;
-
-	void			(*select_bank)(uint32_t bank, uint32_t busw);
-
-	/* priv structures for dma accesses */
-	void			*read_dma_priv;
-	void			*write_dma_priv;
-};
-
-extern int __init fsmc_nor_init(struct platform_device *pdev,
-		unsigned long base, uint32_t bank, uint32_t width);
-extern void __init fsmc_init_board_info(struct platform_device *pdev,
-		struct mtd_partition *partitions, unsigned int nr_partitions,
-		unsigned int width);
-
-#endif /* __MTD_FSMC_H */

include/linux/mtd/mtd.h

@@ -24,6 +24,7 @@
 #include <linux/uio.h>
 #include <linux/notifier.h>
 #include <linux/device.h>
+#include <linux/of.h>
 
 #include <mtd/mtd-abi.h>
 
@@ -322,6 +323,7 @@ struct mtd_info {
 	int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
 	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
+	int (*_max_bad_blocks) (struct mtd_info *mtd, loff_t ofs, size_t len);
 	int (*_suspend) (struct mtd_info *mtd);
 	void (*_resume) (struct mtd_info *mtd);
 	void (*_reboot) (struct mtd_info *mtd);
@@ -385,6 +387,8 @@ static inline void mtd_set_of_node(struct mtd_info *mtd,
 				   struct device_node *np)
 {
 	mtd->dev.of_node = np;
+	if (!mtd->name)
+		of_property_read_string(np, "label", &mtd->name);
 }
 
 static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
@@ -397,6 +401,18 @@ static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
 	return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
 }
 
+static inline int mtd_max_bad_blocks(struct mtd_info *mtd,
+				     loff_t ofs, size_t len)
+{
+	if (!mtd->_max_bad_blocks)
+		return -ENOTSUPP;
+
+	if (mtd->size < (len + ofs) || ofs < 0)
+		return -EINVAL;
+
+	return mtd->_max_bad_blocks(mtd, ofs, len);
+}
+
 int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
 			      struct mtd_pairing_info *info);
 int mtd_pairing_info_to_wunit(struct mtd_info *mtd,

include/linux/mtd/nand.h

@@ -615,7 +615,7 @@ struct nand_buffers {
  * @tALS_min: ALE setup time
  * @tAR_min: ALE to RE# delay
  * @tCEA_max: CE# access time
- * @tCEH_min:
+ * @tCEH_min: CE# high hold time
  * @tCH_min:  CE# hold time
  * @tCHZ_max: CE# high to output hi-Z
  * @tCLH_min: CLE hold time
@@ -801,6 +801,10 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
  *			supported, 0 otherwise.
  * @jedec_params:	[INTERN] holds the JEDEC parameter page when JEDEC is
  *			supported, 0 otherwise.
+ * @max_bb_per_die:	[INTERN] the max number of bad blocks each die of a
+ *			this nand device will encounter their life times.
+ * @blocks_per_die:	[INTERN] The number of PEBs in a die
+ * @data_interface:	[INTERN] NAND interface timing information
  * @read_retries:	[INTERN] the number of read retry modes supported
  * @onfi_set_features:	[REPLACEABLE] set the features for ONFI nand
  * @onfi_get_features:	[REPLACEABLE] get the features for ONFI nand
@@ -883,6 +887,8 @@ struct nand_chip {
 		struct nand_onfi_params	onfi_params;
 		struct nand_jedec_params jedec_params;
 	};
+	u16 max_bb_per_die;
+	u32 blocks_per_die;
 
 	struct nand_data_interface *data_interface;
 
@@ -958,6 +964,7 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
 #define NAND_MFR_SANDISK	0x45
 #define NAND_MFR_INTEL		0x89
 #define NAND_MFR_ATO		0x9b
+#define NAND_MFR_WINBOND	0xef
 
 /* The maximum expected count of bytes in the NAND ID sequence */
 #define NAND_MAX_ID_LEN 8

include/linux/mtd/partitions.h

@@ -41,6 +41,7 @@ struct mtd_partition {
 	uint64_t size;			/* partition size */
 	uint64_t offset;		/* offset within the master MTD space */
 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+	struct device_node *of_node;
 };
 
 #define MTDPART_OFS_RETAIN	(-3)

include/linux/mtd/spi-nor.h

@@ -43,9 +43,13 @@
 #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
 #define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
 #define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
-#define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual SPI) */
-#define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad SPI) */
+#define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual Output SPI) */
+#define SPINOR_OP_READ_1_2_2	0xbb	/* Read data bytes (Dual I/O SPI) */
+#define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad Output SPI) */
+#define SPINOR_OP_READ_1_4_4	0xeb	/* Read data bytes (Quad I/O SPI) */
 #define SPINOR_OP_PP		0x02	/* Page program (up to 256 bytes) */
+#define SPINOR_OP_PP_1_1_4	0x32	/* Quad page program */
+#define SPINOR_OP_PP_1_4_4	0x38	/* Quad page program */
 #define SPINOR_OP_BE_4K		0x20	/* Erase 4KiB block */
 #define SPINOR_OP_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
 #define SPINOR_OP_BE_32K	0x52	/* Erase 32KiB block */
@@ -56,11 +60,17 @@
 #define SPINOR_OP_RDFSR		0x70	/* Read flag status register */
 
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
-#define SPINOR_OP_READ4		0x13	/* Read data bytes (low frequency) */
-#define SPINOR_OP_READ4_FAST	0x0c	/* Read data bytes (high frequency) */
-#define SPINOR_OP_READ4_1_1_2	0x3c	/* Read data bytes (Dual SPI) */
-#define SPINOR_OP_READ4_1_1_4	0x6c	/* Read data bytes (Quad SPI) */
+#define SPINOR_OP_READ_4B	0x13	/* Read data bytes (low frequency) */
+#define SPINOR_OP_READ_FAST_4B	0x0c	/* Read data bytes (high frequency) */
+#define SPINOR_OP_READ_1_1_2_4B	0x3c	/* Read data bytes (Dual Output SPI) */
+#define SPINOR_OP_READ_1_2_2_4B	0xbc	/* Read data bytes (Dual I/O SPI) */
+#define SPINOR_OP_READ_1_1_4_4B	0x6c	/* Read data bytes (Quad Output SPI) */
+#define SPINOR_OP_READ_1_4_4_4B	0xec	/* Read data bytes (Quad I/O SPI) */
 #define SPINOR_OP_PP_4B		0x12	/* Page program (up to 256 bytes) */
+#define SPINOR_OP_PP_1_1_4_4B	0x34	/* Quad page program */
+#define SPINOR_OP_PP_1_4_4_4B	0x3e	/* Quad page program */
+#define SPINOR_OP_BE_4K_4B	0x21	/* Erase 4KiB block */
+#define SPINOR_OP_BE_32K_4B	0x5c	/* Erase 32KiB block */
 #define SPINOR_OP_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
 
 /* Used for SST flashes only. */
@@ -68,6 +78,15 @@
 #define SPINOR_OP_WRDI		0x04	/* Write disable */
 #define SPINOR_OP_AAI_WP	0xad	/* Auto address increment word program */
 
+/* Used for S3AN flashes only */
+#define SPINOR_OP_XSE		0x50	/* Sector erase */
+#define SPINOR_OP_XPP		0x82	/* Page program */
+#define SPINOR_OP_XRDSR		0xd7	/* Read status register */
+
+#define XSR_PAGESIZE		BIT(0)	/* Page size in Po2 or Linear */
+#define XSR_RDY			BIT(7)	/* Ready */
+
+
 /* Used for Macronix and Winbond flashes. */
 #define SPINOR_OP_EN4B		0xb7	/* Enter 4-byte mode */
 #define SPINOR_OP_EX4B		0xe9	/* Exit 4-byte mode */
@@ -119,6 +138,9 @@ enum spi_nor_ops {
 enum spi_nor_option_flags {
 	SNOR_F_USE_FSR		= BIT(0),
 	SNOR_F_HAS_SR_TB	= BIT(1),
+	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
+	SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
+	SNOR_F_READY_XSR_RDY	= BIT(4),
 };
 
 /**

include/linux/platform_data/intel-spi.h

+/*
+ * Intel PCH/PCU SPI flash driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef INTEL_SPI_PDATA_H
+#define INTEL_SPI_PDATA_H
+
+enum intel_spi_type {
+	INTEL_SPI_BYT = 1,
+	INTEL_SPI_LPT,
+	INTEL_SPI_BXT,
+};
+
+/**
+ * struct intel_spi_boardinfo - Board specific data for Intel SPI driver
+ * @type: Type which this controller is compatible with
+ * @writeable: The chip is writeable
+ */
+struct intel_spi_boardinfo {
+	enum intel_spi_type type;
+	bool writeable;
+};
+
+#endif /* INTEL_SPI_PDATA_H */