Commit ce362c00 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (24 commits)
  [PARISC] Fix double free when removing HIL drivers
  [PARISC] Add atomic_sub_and_test
  [PARISC] Enabled some NLS modules in a500, b180 and c3000 defconfigs
  [PARISC] Kill duplicated EXPORT_SYMBOL warnings
  [PARISC] Move ioremap EXPORT_SYMBOL from parisc_ksyms.c
  [PARISC] Make local_t use atomic_long_t
  [PARISC] Update defconfigs
  [PARISC] Add PREEMPT support
  [PARISC] More useful readwrite lock helpers
  [PARISC] Convert HIL drivers to use input_allocate_device
  [PARISC] Fixup CONFIG_EISA a bit
  [PARISC] getsockopt should be ENTRY_COMP
  [PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP
  [PARISC] Temporary FIXME for ioremapping EISA regions
  [PARISC] Enable ioremap functionality unconditionally
  [PARISC] Fix stifb with IOREMAP and a 64-bit kernel
  [PARISC] Add CONFIG_HPPA_IOREMAP to conditionally enable ioremap
  [PARISC] Add STRICT_MM_TYPECHECKS
  [PARISC] Fix IOREMAP with a 64-bit kernel
  [PARISC] Add parisc implementation of flush_kernel_dcache_page()
  ...
parents 064c94f9 cd7a9202
......@@ -177,14 +177,10 @@ config ARCH_DISCONTIGMEM_DEFAULT
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
source "mm/Kconfig"
config PREEMPT
bool
# bool "Preemptible Kernel"
default n
config COMPAT
def_bool y
depends on 64BIT
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc5-pa1
# Fri Oct 21 23:04:34 2005
# Linux kernel version: 2.6.16-pa6
# Sun Mar 26 19:59:51 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
......@@ -10,14 +10,11 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
......@@ -32,17 +29,18 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
......@@ -51,8 +49,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
......@@ -65,6 +65,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
......@@ -75,6 +92,10 @@ CONFIG_PA7100LC=y
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
......@@ -86,7 +107,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_HPUX is not set
#
......@@ -130,6 +151,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
......@@ -165,7 +187,12 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
......@@ -182,64 +209,6 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
......@@ -250,6 +219,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -263,8 +237,11 @@ CONFIG_LLC2=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -304,6 +281,7 @@ CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
......@@ -314,7 +292,6 @@ CONFIG_PARPORT_GSC=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
......@@ -325,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
......@@ -376,6 +345,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
......@@ -407,7 +377,6 @@ CONFIG_MD_RAID1=m
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -471,6 +440,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
......@@ -516,8 +486,8 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_HIL_OLD=y
# CONFIG_KEYBOARD_HIL is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
......@@ -554,6 +524,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
......@@ -598,12 +569,20 @@ CONFIG_MAX_RAW_DEVS=256
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
......@@ -640,7 +619,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
......@@ -655,6 +633,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
......@@ -695,6 +674,8 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
......@@ -723,6 +704,10 @@ CONFIG_SND_HARMONY=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -736,10 +721,9 @@ CONFIG_SND_HARMONY=y
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
......@@ -765,6 +749,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -800,10 +785,10 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -821,7 +806,6 @@ CONFIG_RAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
......@@ -917,18 +901,22 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_RODATA=y
#
# Security options
......
......@@ -1031,8 +1031,8 @@ CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
......
......@@ -939,10 +939,10 @@ CONFIG_MSDOS_PARTITION=y
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
......@@ -962,8 +962,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
......@@ -973,10 +973,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc5-pa1
# Fri Oct 21 23:06:31 2005
# Linux kernel version: 2.6.16-pa6
# Sun Mar 26 20:03:29 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
......@@ -10,14 +10,11 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
......@@ -32,28 +29,30 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
......@@ -66,6 +65,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
......@@ -78,6 +94,10 @@ CONFIG_PA20=y
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
......@@ -89,7 +109,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HPUX is not set
#
......@@ -135,6 +155,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
......@@ -175,7 +196,12 @@ CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
......@@ -192,87 +218,11 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_DCCP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
CONFIG_IP6_NF_MATCH_OWNER=m
# CONFIG_IP6_NF_MATCH_MARK is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_AHESP is not set
CONFIG_IP6_NF_MATCH_LENGTH=m
# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_MARK is not set
# CONFIG_IP6_NF_TARGET_HL is not set
# CONFIG_IP6_NF_RAW is not set
#
# DCCP Configuration (EXPERIMENTAL)
......@@ -283,6 +233,11 @@ CONFIG_IP6_NF_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -295,8 +250,11 @@ CONFIG_IP6_NF_MANGLE=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -341,7 +299,6 @@ CONFIG_FW_LOADER=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
......@@ -355,14 +312,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
......@@ -458,6 +407,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
......@@ -466,7 +416,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
......@@ -476,18 +425,18 @@ CONFIG_SCSI_SATA=y
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
......@@ -496,18 +445,11 @@ CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
......@@ -633,6 +575,7 @@ CONFIG_E1000=m
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
......@@ -668,6 +611,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
......@@ -744,6 +688,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
......@@ -753,7 +698,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MUX is not set
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
......@@ -788,12 +732,19 @@ CONFIG_MAX_RAW_DEVS=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
......@@ -830,7 +781,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
......@@ -840,6 +790,7 @@ CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
......@@ -853,10 +804,7 @@ CONFIG_FB_STI=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
......@@ -866,6 +814,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
......@@ -898,23 +847,27 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
CONFIG_SND_AD1889=y
# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -923,39 +876,38 @@ CONFIG_SND_AC97_BUS=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AD1889=y
# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
......@@ -998,12 +950,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
......@@ -1015,12 +970,15 @@ CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
......@@ -1034,6 +992,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
......@@ -1108,7 +1067,7 @@ CONFIG_USB_LEGOTOWER=m
# CONFIG_INFINIBAND is not set
#
# SN Devices
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
......@@ -1130,6 +1089,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -1164,10 +1124,10 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1225,10 +1185,10 @@ CONFIG_MSDOS_PARTITION=y
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
......@@ -1248,8 +1208,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
......@@ -1259,10 +1219,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
......@@ -1274,18 +1234,22 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_RODATA=y
#
# Security options
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc5-pa1
# Fri Oct 21 23:01:33 2005
# Linux kernel version: 2.6.16-pa6
# Sun Mar 26 19:50:07 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
......@@ -15,7 +15,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
......@@ -30,17 +29,18 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
......@@ -49,14 +49,33 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
......@@ -67,6 +86,10 @@ CONFIG_PA7000=y
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
......@@ -78,7 +101,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_HPUX is not set
#
......@@ -132,6 +155,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
......@@ -174,6 +198,11 @@ CONFIG_IPV6=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -186,8 +215,11 @@ CONFIG_IPV6=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -228,6 +260,7 @@ CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
......@@ -254,14 +287,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
......@@ -305,6 +330,7 @@ CONFIG_SCSI_SPI_ATTRS=y
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
......@@ -331,7 +357,7 @@ CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
......@@ -340,13 +366,7 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
......@@ -471,6 +491,7 @@ CONFIG_ACENIC=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
......@@ -562,13 +583,13 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_HIL_OLD=y
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_HIL is not set
CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
......@@ -628,6 +649,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
......@@ -675,12 +697,19 @@ CONFIG_GEN_RTC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
......@@ -691,6 +720,7 @@ CONFIG_GEN_RTC=y
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
......@@ -718,7 +748,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
......@@ -728,6 +757,7 @@ CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
......@@ -741,9 +771,7 @@ CONFIG_FB_STI=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
......@@ -753,15 +781,28 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
......@@ -781,23 +822,27 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
CONFIG_SND_AD1889=y
# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -806,39 +851,38 @@ CONFIG_SND_AC97_BUS=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AD1889=y
# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
......@@ -888,14 +932,18 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
......@@ -918,6 +966,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
......@@ -994,7 +1043,7 @@ CONFIG_USB_MON=y
# CONFIG_INFINIBAND is not set
#
# SN Devices
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
......@@ -1011,6 +1060,7 @@ CONFIG_JBD=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -1045,6 +1095,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1151,18 +1202,22 @@ CONFIG_OPROFILE=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_RODATA=y
#
# Security options
......
......@@ -89,7 +89,7 @@ update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
test_bit(PG_dcache_dirty, &page->flags)) {
flush_kernel_dcache_page(page_address(page));
flush_kernel_dcache_page(page);
clear_bit(PG_dcache_dirty, &page->flags);
}
}
......@@ -278,7 +278,7 @@ void flush_dcache_page(struct page *page)
return;
}
flush_kernel_dcache_page(page_address(page));
flush_kernel_dcache_page(page);
if (!mapping)
return;
......@@ -317,7 +317,7 @@ EXPORT_SYMBOL(flush_dcache_page);
/* Defined in arch/parisc/kernel/pacache.S */
EXPORT_SYMBOL(flush_kernel_dcache_range_asm);
EXPORT_SYMBOL(flush_kernel_dcache_page);
EXPORT_SYMBOL(flush_kernel_dcache_page_asm);
EXPORT_SYMBOL(flush_data_cache_local);
EXPORT_SYMBOL(flush_kernel_icache_range_asm);
......
......@@ -563,10 +563,10 @@
extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0
depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */
/* Get rid of prot bits and convert to page addr for iitlbt */
/* Get rid of prot bits and convert to page addr for iitlbt and idtlbt */
depd %r0,63,PAGE_SHIFT,\pte
extrd,u \pte,56,32,\pte
extrd,s \pte,(63-PAGE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte
.endm
/* Identical macro to make_insert_tlb above, except it
......@@ -584,7 +584,7 @@
/* Get rid of prot bits and convert to page addr for iitlba */
depi 0,31,12,\pte
depi 0,31,PAGE_SHIFT,\pte
extru \pte,24,25,\pte
.endm
......@@ -1014,14 +1014,21 @@ intr_restore:
nop
nop
#ifndef CONFIG_PREEMPT
# define intr_do_preempt intr_restore
#endif /* !CONFIG_PREEMPT */
.import schedule,code
intr_do_resched:
/* Only do reschedule if we are returning to user space */
/* Only call schedule on return to userspace. If we're returning
* to kernel space, we may schedule if CONFIG_PREEMPT, otherwise
* we jump back to intr_restore.
*/
LDREG PT_IASQ0(%r16), %r20
CMPIB= 0,%r20,intr_restore /* backward */
CMPIB= 0, %r20, intr_do_preempt
nop
LDREG PT_IASQ1(%r16), %r20
CMPIB= 0,%r20,intr_restore /* backward */
CMPIB= 0, %r20, intr_do_preempt
nop
#ifdef CONFIG_64BIT
......@@ -1037,6 +1044,32 @@ intr_do_resched:
#endif
ldo R%intr_check_sig(%r2), %r2
/* preempt the current task on returning to kernel
* mode from an interrupt, iff need_resched is set,
* and preempt_count is 0. otherwise, we continue on
* our merry way back to the current running task.
*/
#ifdef CONFIG_PREEMPT
.import preempt_schedule_irq,code
intr_do_preempt:
rsm PSW_SM_I, %r0 /* disable interrupts */
/* current_thread_info()->preempt_count */
mfctl %cr30, %r1
LDREG TI_PRE_COUNT(%r1), %r19
CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */
nop /* prev insn branched backwards */
/* check if we interrupted a critical path */
LDREG PT_PSW(%r16), %r20
bb,<,n %r20, 31 - PSW_SM_I, intr_restore
nop
BL preempt_schedule_irq, %r2
nop
b intr_restore /* ssm PSW_SM_I done by intr_restore */
#endif /* CONFIG_PREEMPT */
.import do_signal,code
intr_do_signal:
......
......@@ -621,9 +621,9 @@ __clear_user_page_asm:
.procend
.export flush_kernel_dcache_page
.export flush_kernel_dcache_page_asm
flush_kernel_dcache_page:
flush_kernel_dcache_page_asm:
.proc
.callinfo NO_CALLS
.entry
......
......@@ -30,22 +30,7 @@
#include <linux/syscalls.h>
#include <linux/string.h>
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strncat);
EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strpbrk);
#include <asm/atomic.h>
......@@ -82,16 +67,12 @@ EXPORT_SYMBOL($global$);
#endif
#include <asm/io.h>
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(memcpy_toio);
EXPORT_SYMBOL(memcpy_fromio);
EXPORT_SYMBOL(memset_io);
#include <asm/unistd.h>
EXPORT_SYMBOL(sys_open);
EXPORT_SYMBOL(sys_lseek);
EXPORT_SYMBOL(sys_read);
EXPORT_SYMBOL(sys_write);
#include <asm/semaphore.h>
......
......@@ -5,9 +5,8 @@
* Copyright (C) 2002-2004 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
......
......@@ -805,7 +805,7 @@ static int perf_write_image(uint64_t *memaddr)
return -1;
}
runway = ioremap(cpu_device->hpa.start, 4096);
runway = ioremap_nocache(cpu_device->hpa.start, 4096);
/* Merge intrigue bits into Runway STATUS 0 */
tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
......
......@@ -287,7 +287,7 @@
ENTRY_SAME(chown) /* 180 */
/* setsockopt() used by iptables: SO_SET_REPLACE/SO_SET_ADD_COUNTERS */
ENTRY_COMP(setsockopt)
ENTRY_SAME(getsockopt)
ENTRY_COMP(getsockopt)
ENTRY_COMP(sendmsg)
ENTRY_COMP(recvmsg)
ENTRY_SAME(semop) /* 185 */
......
......@@ -263,11 +263,7 @@ static const struct iomap_ops iomem_ops = {
const struct iomap_ops *iomap_ops[8] = {
[0] = &ioport_ops,
#ifdef CONFIG_DEBUG_IOREMAP
[6] = &iomem_ops,
#else
[7] = &iomem_ops
#endif
};
......
......@@ -1013,9 +1013,9 @@ void flush_tlb_all(void)
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
#if 0
if (start < end)
printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
if (start >= end)
return;
printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
......@@ -1023,6 +1023,5 @@ void free_initrd_mem(unsigned long start, unsigned long end)
num_physpages++;
totalram_pages++;
}
#endif
}
#endif
......@@ -72,7 +72,6 @@ remap_area_pmd(pmd_t *pmd, unsigned long address, unsigned long size,
return 0;
}
#if USE_HPPA_IOREMAP
static int
remap_area_pages(unsigned long address, unsigned long phys_addr,
unsigned long size, unsigned long flags)
......@@ -114,31 +113,6 @@ remap_area_pages(unsigned long address, unsigned long phys_addr,
return error;
}
#endif /* USE_HPPA_IOREMAP */
#ifdef CONFIG_DEBUG_IOREMAP
static unsigned long last = 0;
void gsc_bad_addr(unsigned long addr)
{
if (time_after(jiffies, last + HZ*10)) {
printk("gsc_foo() called with bad address 0x%lx\n", addr);
dump_stack();
last = jiffies;
}
}
EXPORT_SYMBOL(gsc_bad_addr);
void __raw_bad_addr(const volatile void __iomem *addr)
{
if (time_after(jiffies, last + HZ*10)) {
printk("__raw_foo() called with bad address 0x%p\n", addr);
dump_stack();
last = jiffies;
}
}
EXPORT_SYMBOL(__raw_bad_addr);
#endif
/*
* Generic mapping function (not visible outside):
......@@ -154,26 +128,19 @@ EXPORT_SYMBOL(__raw_bad_addr);
*/
void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
{
#if !(USE_HPPA_IOREMAP)
void *addr;
struct vm_struct *area;
unsigned long offset, last_addr;
#ifdef CONFIG_EISA
unsigned long end = phys_addr + size - 1;
/* Support EISA addresses */
if ((phys_addr >= 0x00080000 && end < 0x000fffff)
|| (phys_addr >= 0x00500000 && end < 0x03bfffff)) {
phys_addr |= 0xfc000000;
if ((phys_addr >= 0x00080000 && end < 0x000fffff) ||
(phys_addr >= 0x00500000 && end < 0x03bfffff)) {
phys_addr |= F_EXTEND(0xfc000000);
}
#ifdef CONFIG_DEBUG_IOREMAP
return (void __iomem *)(phys_addr - (0x1UL << NYBBLE_SHIFT));
#else
return (void __iomem *)phys_addr;
#endif
#else
void *addr;
struct vm_struct *area;
unsigned long offset, last_addr;
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
......@@ -217,15 +184,12 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
}
return (void __iomem *) (offset + (char *)addr);
#endif
}
EXPORT_SYMBOL(__ioremap);
void iounmap(void __iomem *addr)
{
#if !(USE_HPPA_IOREMAP)
return;
#else
if (addr > high_memory)
return vfree((void *) (PAGE_MASK & (unsigned long __force) addr));
#endif
}
EXPORT_SYMBOL(iounmap);
......@@ -66,7 +66,7 @@ static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] =
static char hil_language[][16] = { HIL_LOCALE_MAP };
struct hil_kbd {
struct input_dev dev;
struct input_dev *dev;
struct serio *serio;
/* Input buffer and index for packets from HIL bus. */
......@@ -86,7 +86,7 @@ struct hil_kbd {
/* Process a complete packet after transfer from the HIL */
static void hil_kbd_process_record(struct hil_kbd *kbd)
{
struct input_dev *dev = &kbd->dev;
struct input_dev *dev = kbd->dev;
hil_packet *data = kbd->data;
hil_packet p;
int idx, i, cnt;
......@@ -240,8 +240,8 @@ static void hil_kbd_disconnect(struct serio *serio)
return;
}
input_unregister_device(&kbd->dev);
serio_close(serio);
input_unregister_device(kbd->dev);
kfree(kbd);
}
......@@ -251,16 +251,18 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
uint8_t did, *idd;
int i;
kbd = kmalloc(sizeof(*kbd), GFP_KERNEL);
kbd = kzalloc(sizeof(*kbd), GFP_KERNEL);
if (!kbd)
return -ENOMEM;
memset(kbd, 0, sizeof(struct hil_kbd));
kbd->dev = input_allocate_device();
if (!kbd->dev) goto bail1;
kbd->dev->private = kbd;
if (serio_open(serio, drv)) goto bail0;
serio_set_drvdata(serio, kbd);
kbd->serio = serio;
kbd->dev.private = kbd;
init_MUTEX_LOCKED(&(kbd->sem));
......@@ -302,38 +304,38 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
break;
default:
goto bail1;
goto bail2;
}
if(HIL_IDD_NUM_BUTTONS(idd) || HIL_IDD_NUM_AXES_PER_SET(*idd)) {
printk(KERN_INFO PREFIX "keyboards only, no combo devices supported.\n");
goto bail1;
goto bail2;
}
kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
kbd->dev.keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
kbd->dev.keycodesize = sizeof(hil_kbd_set1[0]);
kbd->dev.keycode = hil_kbd_set1;
kbd->dev.name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME;
kbd->dev.phys = "hpkbd/input0"; /* XXX */
kbd->dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
kbd->dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
kbd->dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
kbd->dev->keycodesize = sizeof(hil_kbd_set1[0]);
kbd->dev->keycode = hil_kbd_set1;
kbd->dev->name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME;
kbd->dev->phys = "hpkbd/input0"; /* XXX */
kbd->dev.id.bustype = BUS_HIL;
kbd->dev.id.vendor = PCI_VENDOR_ID_HP;
kbd->dev.id.product = 0x0001; /* TODO: get from kbd->rsc */
kbd->dev.id.version = 0x0100; /* TODO: get from kbd->rsc */
kbd->dev.dev = &serio->dev;
kbd->dev->id.bustype = BUS_HIL;
kbd->dev->id.vendor = PCI_VENDOR_ID_HP;
kbd->dev->id.product = 0x0001; /* TODO: get from kbd->rsc */
kbd->dev->id.version = 0x0100; /* TODO: get from kbd->rsc */
kbd->dev->dev = &serio->dev;
for (i = 0; i < 128; i++) {
set_bit(hil_kbd_set1[i], kbd->dev.keybit);
set_bit(hil_kbd_set3[i], kbd->dev.keybit);
set_bit(hil_kbd_set1[i], kbd->dev->keybit);
set_bit(hil_kbd_set3[i], kbd->dev->keybit);
}
clear_bit(0, kbd->dev.keybit);
clear_bit(0, kbd->dev->keybit);
input_register_device(&kbd->dev);
input_register_device(kbd->dev);
printk(KERN_INFO "input: %s, ID: %d\n",
kbd->dev.name, did);
kbd->dev->name, did);
serio->write(serio, 0);
serio->write(serio, 0);
......@@ -343,8 +345,10 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
up(&(kbd->sem));
return 0;
bail1:
bail2:
serio_close(serio);
bail1:
input_free_device(kbd->dev);
bail0:
kfree(kbd);
serio_set_drvdata(serio, NULL);
......
......@@ -3,7 +3,7 @@
*
* Copyright (C) 1998 Philip Blundell <philb@gnu.org>
* Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai>
* Copyright (C) 1999-2003 Helge Deller <deller@gmx.de>
* Copyright (C) 1999-2006 Helge Deller <deller@gmx.de>
*
* Very basic HP Human Interface Loop (HIL) driver.
* This driver handles the keyboard on HP300 (m68k) and on some
......@@ -90,7 +90,7 @@ static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] =
/* HIL structure */
static struct {
struct input_dev dev;
struct input_dev *dev;
unsigned int curdev;
......@@ -117,7 +117,7 @@ static void poll_finished(void)
down = (hil_dev.data[1] & 1) == 0;
scode = hil_dev.data[1] >> 1;
key = hphilkeyb_keycode[scode];
input_report_key(&hil_dev.dev, key, down);
input_report_key(hil_dev.dev, key, down);
break;
}
hil_dev.curdev = 0;
......@@ -207,9 +207,14 @@ hil_keyb_init(void)
unsigned int i, kbid;
wait_queue_head_t hil_wait;
if (hil_dev.dev.id.bustype) {
if (hil_dev.dev) {
return -ENODEV; /* already initialized */
}
hil_dev.dev = input_allocate_device();
if (!hil_dev.dev)
return -ENOMEM;
hil_dev.dev->private = &hil_dev;
#if defined(CONFIG_HP300)
if (!hwreg_present((void *)(HILBASE + HIL_DATA)))
......@@ -247,28 +252,26 @@ hil_keyb_init(void)
c = 0;
hil_do(HIL_WRITEKBDSADR, &c, 1);
init_input_dev(&hil_dev.dev);
for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
if (hphilkeyb_keycode[i] != KEY_RESERVED)
set_bit(hphilkeyb_keycode[i], hil_dev.dev.keybit);
hil_dev.dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
hil_dev.dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
hil_dev.dev.keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
hil_dev.dev.keycodesize = sizeof(hphilkeyb_keycode[0]);
hil_dev.dev.keycode = hphilkeyb_keycode;
hil_dev.dev.name = "HIL keyboard";
hil_dev.dev.phys = "hpkbd/input0";
hil_dev.dev.id.bustype = BUS_HIL;
hil_dev.dev.id.vendor = PCI_VENDOR_ID_HP;
hil_dev.dev.id.product = 0x0001;
hil_dev.dev.id.version = 0x0010;
input_register_device(&hil_dev.dev);
set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
hil_dev.dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
hil_dev.dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
hil_dev.dev->keycodesize = sizeof(hphilkeyb_keycode[0]);
hil_dev.dev->keycode = hphilkeyb_keycode;
hil_dev.dev->name = "HIL keyboard";
hil_dev.dev->phys = "hpkbd/input0";
hil_dev.dev->id.bustype = BUS_HIL;
hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP;
hil_dev.dev->id.product = 0x0001;
hil_dev.dev->id.version = 0x0010;
input_register_device(hil_dev.dev);
printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
hil_dev.dev.name, kbid, HILBASE, HIL_IRQ);
hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
return 0;
}
......@@ -329,7 +332,9 @@ static void __exit hil_exit(void)
/* Turn off interrupts */
hil_do(HIL_INTOFF, NULL, 0);
input_unregister_device(&hil_dev.dev);
input_unregister_device(hil_dev.dev);
hil_dev.dev = NULL;
#if defined(CONFIG_PARISC)
unregister_parisc_driver(&hil_driver);
......
......@@ -55,7 +55,7 @@ MODULE_LICENSE("Dual BSD/GPL");
#define HIL_PTR_MAX_LENGTH 16
struct hil_ptr {
struct input_dev dev;
struct input_dev *dev;
struct serio *serio;
/* Input buffer and index for packets from HIL bus. */
......@@ -79,7 +79,7 @@ struct hil_ptr {
/* Process a complete packet after transfer from the HIL */
static void hil_ptr_process_record(struct hil_ptr *ptr)
{
struct input_dev *dev = &ptr->dev;
struct input_dev *dev = ptr->dev;
hil_packet *data = ptr->data;
hil_packet p;
int idx, i, cnt, laxis;
......@@ -148,12 +148,12 @@ static void hil_ptr_process_record(struct hil_ptr *ptr)
if (absdev) {
val = lo + (hi<<8);
#ifdef TABLET_AUTOADJUST
if (val < ptr->dev.absmin[ABS_X + i])
ptr->dev.absmin[ABS_X + i] = val;
if (val > ptr->dev.absmax[ABS_X + i])
ptr->dev.absmax[ABS_X + i] = val;
if (val < dev->absmin[ABS_X + i])
dev->absmin[ABS_X + i] = val;
if (val > dev->absmax[ABS_X + i])
dev->absmax[ABS_X + i] = val;
#endif
if (i%3) val = ptr->dev.absmax[ABS_X + i] - val;
if (i%3) val = dev->absmax[ABS_X + i] - val;
input_report_abs(dev, ABS_X + i, val);
} else {
val = (int) (((int8_t)lo) | ((int8_t)hi<<8));
......@@ -233,26 +233,29 @@ static void hil_ptr_disconnect(struct serio *serio)
return;
}
input_unregister_device(&ptr->dev);
serio_close(serio);
input_unregister_device(ptr->dev);
kfree(ptr);
}
static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
{
struct hil_ptr *ptr;
char *txt;
unsigned int i, naxsets, btntype;
uint8_t did, *idd;
struct hil_ptr *ptr;
char *txt;
unsigned int i, naxsets, btntype;
uint8_t did, *idd;
if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM;
memset(ptr, 0, sizeof(struct hil_ptr));
if (!(ptr = kzalloc(sizeof(struct hil_ptr), GFP_KERNEL)))
return -ENOMEM;
if (serio_open(serio, driver)) goto bail0;
ptr->dev = input_allocate_device();
if (!ptr->dev) goto bail0;
ptr->dev->private = ptr;
if (serio_open(serio, driver)) goto bail1;
serio_set_drvdata(serio, ptr);
ptr->serio = serio;
ptr->dev.private = ptr;
init_MUTEX_LOCKED(&(ptr->sem));
......@@ -283,25 +286,24 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
up(&(ptr->sem));
init_input_dev(&ptr->dev);
did = ptr->idd[0];
idd = ptr->idd + 1;
txt = "unknown";
if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
ptr->dev.evbit[0] = BIT(EV_REL);
ptr->dev->evbit[0] = BIT(EV_REL);
txt = "relative";
}
if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_ABS) {
ptr->dev.evbit[0] = BIT(EV_ABS);
ptr->dev->evbit[0] = BIT(EV_ABS);
txt = "absolute";
}
if (!ptr->dev.evbit[0]) {
goto bail1;
if (!ptr->dev->evbit[0]) {
goto bail2;
}
ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
if (ptr->nbtn) ptr->dev.evbit[0] |= BIT(EV_KEY);
if (ptr->nbtn) ptr->dev->evbit[0] |= BIT(EV_KEY);
naxsets = HIL_IDD_NUM_AXSETS(*idd);
ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd);
......@@ -325,7 +327,7 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
btntype = BTN_MOUSE;
for (i = 0; i < ptr->nbtn; i++) {
set_bit(btntype | i, ptr->dev.keybit);
set_bit(btntype | i, ptr->dev->keybit);
ptr->btnmap[i] = btntype | i;
}
......@@ -337,50 +339,52 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
for (i = 0; i < ptr->naxes; i++) {
set_bit(REL_X + i, ptr->dev.relbit);
set_bit(REL_X + i, ptr->dev->relbit);
}
for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) {
set_bit(REL_X + i, ptr->dev.relbit);
set_bit(REL_X + i, ptr->dev->relbit);
}
} else {
for (i = 0; i < ptr->naxes; i++) {
set_bit(ABS_X + i, ptr->dev.absbit);
ptr->dev.absmin[ABS_X + i] = 0;
ptr->dev.absmax[ABS_X + i] =
set_bit(ABS_X + i, ptr->dev->absbit);
ptr->dev->absmin[ABS_X + i] = 0;
ptr->dev->absmax[ABS_X + i] =
HIL_IDD_AXIS_MAX((ptr->idd + 1), i);
}
for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) {
set_bit(ABS_X + i, ptr->dev.absbit);
ptr->dev.absmin[ABS_X + i] = 0;
ptr->dev.absmax[ABS_X + i] =
set_bit(ABS_X + i, ptr->dev->absbit);
ptr->dev->absmin[ABS_X + i] = 0;
ptr->dev->absmax[ABS_X + i] =
HIL_IDD_AXIS_MAX((ptr->idd + 1), (i - 3));
}
#ifdef TABLET_AUTOADJUST
for (i = 0; i < ABS_MAX; i++) {
int diff = ptr->dev.absmax[ABS_X + i] / 10;
ptr->dev.absmin[ABS_X + i] += diff;
ptr->dev.absmax[ABS_X + i] -= diff;
int diff = ptr->dev->absmax[ABS_X + i] / 10;
ptr->dev->absmin[ABS_X + i] += diff;
ptr->dev->absmax[ABS_X + i] -= diff;
}
#endif
}
ptr->dev.name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME;
ptr->dev->name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME;
ptr->dev.id.bustype = BUS_HIL;
ptr->dev.id.vendor = PCI_VENDOR_ID_HP;
ptr->dev.id.product = 0x0001; /* TODO: get from ptr->rsc */
ptr->dev.id.version = 0x0100; /* TODO: get from ptr->rsc */
ptr->dev.dev = &serio->dev;
ptr->dev->id.bustype = BUS_HIL;
ptr->dev->id.vendor = PCI_VENDOR_ID_HP;
ptr->dev->id.product = 0x0001; /* TODO: get from ptr->rsc */
ptr->dev->id.version = 0x0100; /* TODO: get from ptr->rsc */
ptr->dev->dev = &serio->dev;
input_register_device(&ptr->dev);
input_register_device(ptr->dev);
printk(KERN_INFO "input: %s (%s), ID: %d\n",
ptr->dev.name,
ptr->dev->name,
(btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad",
did);
return 0;
bail1:
bail2:
serio_close(serio);
bail1:
input_free_device(ptr->dev);
bail0:
kfree(ptr);
serio_set_drvdata(serio, NULL);
......
/*
* drivers/input/serio/gscps2.c
*
* Copyright (c) 2004 Helge Deller <deller@gmx.de>
* Copyright (c) 2004-2006 Helge Deller <deller@gmx.de>
* Copyright (c) 2002 Laurent Canet <canetl@esiee.fr>
* Copyright (c) 2002 Thibaut Varene <varenet@parisc-linux.org>
*
......@@ -354,7 +354,7 @@ static int __init gscps2_probe(struct parisc_device *dev)
memset(serio, 0, sizeof(struct serio));
ps2port->port = serio;
ps2port->padev = dev;
ps2port->addr = ioremap(hpa, GSC_STATUS + 4);
ps2port->addr = ioremap_nocache(hpa, GSC_STATUS + 4);
spin_lock_init(&ps2port->lock);
gscps2_reset(ps2port);
......
......@@ -1560,7 +1560,7 @@ static int ccio_probe(struct parisc_device *dev)
*ioc_p = ioc;
ioc->hw_path = dev->hw_path;
ioc->ioc_regs = ioremap(dev->hpa.start, 4096);
ioc->ioc_regs = ioremap_nocache(dev->hpa.start, 4096);
ccio_ioc_init(ioc);
ccio_init_resources(ioc);
hppa_dma_ops = &ccio_ops;
......
......@@ -5,6 +5,7 @@
** (c) Copyright 1999 SuSE GmbH
** (c) Copyright 1999,2000 Hewlett-Packard Company
** (c) Copyright 2000 Grant Grundler
** (c) Copyright 2006 Helge Deller
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
......@@ -785,7 +786,7 @@ dino_bridge_init(struct dino_device *dino_dev, const char *name)
if((io_addr & (1 << i)) == 0)
continue;
start = (unsigned long)(signed int)(0xf0000000 | (i << 23));
start = F_EXTEND(0xf0000000UL) | (i << 23);
end = start + 8 * 1024 * 1024 - 1;
DBG("DINO RANGE %d is at 0x%lx-0x%lx\n", count,
......@@ -996,7 +997,7 @@ static int __init dino_probe(struct parisc_device *dev)
}
dino_dev->hba.dev = dev;
dino_dev->hba.base_addr = ioremap(hpa, 4096);
dino_dev->hba.base_addr = ioremap_nocache(hpa, 4096);
dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
spin_lock_init(&dino_dev->dinosaur_pen);
dino_dev->hba.iommu = ccio_get_iommu(dev);
......
......@@ -366,7 +366,7 @@ static int __devinit eisa_probe(struct parisc_device *dev)
eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
}
}
eisa_eeprom_addr = ioremap(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
&eisa_dev.hba.lmmio_space);
init_eisa_pic();
......
......@@ -879,7 +879,7 @@ void *iosapic_register(unsigned long hpa)
return NULL;
}
isi->addr = ioremap(hpa, 4096);
isi->addr = ioremap_nocache(hpa, 4096);
isi->isi_hpa = hpa;
isi->isi_version = iosapic_rd_version(isi);
isi->isi_num_vectors = IOSAPIC_IRDT_MAX_ENTRY(isi->isi_version) + 1;
......
......@@ -1213,7 +1213,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
** Postable I/O port space is per PCI host adapter.
** base of 64MB PIOP region
*/
lba_dev->iop_base = ioremap(p->start, 64 * 1024 * 1024);
lba_dev->iop_base = ioremap_nocache(p->start, 64 * 1024 * 1024);
sprintf(lba_dev->hba.io_name, "PCI%02lx Ports",
lba_dev->hba.bus_num.start);
......@@ -1525,7 +1525,7 @@ lba_driver_probe(struct parisc_device *dev)
u32 func_class;
void *tmp_obj;
char *version;
void __iomem *addr = ioremap(dev->hpa.start, 4096);
void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096);
/* Read HW Rev First */
func_class = READ_REG32(addr + LBA_FCLASS);
......@@ -1619,7 +1619,7 @@ lba_driver_probe(struct parisc_device *dev)
} else {
if (!astro_iop_base) {
/* Sprockets PDC uses NPIOP region */
astro_iop_base = ioremap(LBA_PORT_BASE, 64 * 1024);
astro_iop_base = ioremap_nocache(LBA_PORT_BASE, 64 * 1024);
pci_port = &lba_astro_port_ops;
}
......@@ -1700,7 +1700,7 @@ void __init lba_init(void)
*/
void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
{
void __iomem * base_addr = ioremap(lba->hpa.start, 4096);
void __iomem * base_addr = ioremap_nocache(lba->hpa.start, 4096);
imask <<= 2; /* adjust for hints - 2 more bits */
......
......@@ -4,9 +4,8 @@
* Copyright (C) 2005-2006 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
......
......@@ -1642,9 +1642,9 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
**
**************************************************************************/
static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
static void __iomem *ioc_remap(struct sba_device *sba_dev, unsigned int offset)
{
return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
return ioremap_nocache(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
}
static void sba_hw_init(struct sba_device *sba_dev)
......@@ -2040,7 +2040,7 @@ sba_driver_callback(struct parisc_device *dev)
u32 func_class;
int i;
char *version;
void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
void __iomem *sba_addr = ioremap_nocache(dev->hpa.start, SBA_FUNC_SIZE);
struct proc_dir_entry *info_entry, *bitmap_entry, *root;
sba_dump_ranges(sba_addr);
......
......@@ -12,6 +12,7 @@
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
* (C) Copyright 2006 Helge Deller <deller@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -388,43 +389,34 @@ int superio_fixup_irq(struct pci_dev *pcidev)
return local_irq;
}
static struct uart_port serial[] = {
{
.iotype = UPIO_PORT,
.line = 0,
.type = PORT_16550A,
.uartclk = 115200*16,
.fifosize = 16,
},
{
.iotype = UPIO_PORT,
.line = 1,
.type = PORT_16550A,
.uartclk = 115200*16,
.fifosize = 16,
}
};
static void __devinit superio_serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
int retval;
serial[0].iobase = sio_dev.sp1_base;
serial[0].irq = SP1_IRQ;
spin_lock_init(&serial[0].lock);
retval = early_serial_setup(&serial[0]);
struct uart_port serial_port;
memset(&serial_port, 0, sizeof(serial_port));
serial_port.iotype = UPIO_PORT;
serial_port.type = PORT_16550A;
serial_port.uartclk = 115200*16;
serial_port.fifosize = 16;
spin_lock_init(&serial_port.lock);
/* serial port #1 */
serial_port.iobase = sio_dev.sp1_base;
serial_port.irq = SP1_IRQ;
serial_port.line = 0;
retval = early_serial_setup(&serial_port);
if (retval < 0) {
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
serial[1].iobase = sio_dev.sp2_base;
serial[1].irq = SP2_IRQ;
spin_lock_init(&serial[1].lock);
retval = early_serial_setup(&serial[1]);
/* serial port #2 */
serial_port.iobase = sio_dev.sp2_base;
serial_port.irq = SP2_IRQ;
serial_port.line = 1;
retval = early_serial_setup(&serial_port);
if (retval < 0)
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
......
......@@ -112,7 +112,7 @@ lasi700_probe(struct parisc_device *dev)
hostdata->dev = &dev->dev;
dma_set_mask(&dev->dev, DMA_32BIT_MASK);
hostdata->base = ioremap(base, 0x100);
hostdata->base = ioremap_nocache(base, 0x100);
hostdata->differential = 0;
if (dev->id.sversion == LASI_700_SVERSION) {
......
......@@ -88,7 +88,7 @@ zalon_probe(struct parisc_device *dev)
struct gsc_irq gsc_irq;
u32 zalon_vers;
int error = -ENODEV;
void __iomem *zalon = ioremap(dev->hpa.start, 4096);
void __iomem *zalon = ioremap_nocache(dev->hpa.start, 4096);
void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
static int unit = 0;
struct Scsi_Host *host;
......
......@@ -52,13 +52,14 @@ serial_init_chip(struct parisc_device *dev)
address += 0x800;
}
memset(&port, 0, sizeof(struct uart_port));
port.mapbase = address;
port.irq = dev->irq;
port.iotype = UPIO_MEM;
port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
port.uartclk = LASI_BASE_BAUD * 16;
port.dev = &dev->dev;
memset(&port, 0, sizeof(port));
port.iotype = UPIO_MEM;
port.uartclk = LASI_BASE_BAUD * 16;
port.mapbase = address;
port.membase = ioremap_nocache(address, 16);
port.irq = dev->irq;
port.flags = UPF_BOOT_AUTOCONF;
port.dev = &dev->dev;
err = serial8250_register_port(&port);
if (err < 0) {
......
......@@ -51,7 +51,7 @@
#define MUX_BREAK(status) ((status & 0xF000) == 0x2000)
#define MUX_NR 256
static unsigned int port_cnt = 0;
static unsigned int port_cnt __read_mostly;
static struct uart_port mux_ports[MUX_NR];
static struct uart_driver mux_driver = {
......@@ -461,7 +461,7 @@ static int __init mux_probe(struct parisc_device *dev)
port->iobase = 0;
port->mapbase = dev->hpa.start + MUX_OFFSET +
(i * MUX_LINE_OFFSET);
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET);
port->iotype = UPIO_MEM;
port->type = PORT_MUX;
port->irq = NO_IRQ;
......
......@@ -373,7 +373,7 @@ sti_dump_globcfg(struct sti_glob_cfg *glob_cfg, unsigned int sti_mem_request)
glob_cfg->save_addr));
/* dump extended cfg */
cfg = PTR_STI(glob_cfg->ext_ptr);
cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr);
DPRINTK(( KERN_INFO
"monitor %d\n"
"in friendly mode: %d\n"
......@@ -453,25 +453,11 @@ sti_init_glob_cfg(struct sti_struct *sti,
sti->regions_phys[i] =
REGION_OFFSET_TO_PHYS(sti->regions[i], newhpa);
/* remap virtually */
/* FIXME: add BTLB support if btlb==1 */
len = sti->regions[i].region_desc.length * 4096;
/* XXX: Enabling IOREMAP debugging causes a crash, so we must be passing
* a virtual address to something expecting a physical address that doesn't
* go through a readX macro */
#if 0
if (len)
glob_cfg->region_ptrs[i] = (unsigned long) (
sti->regions[i].region_desc.cache ?
ioremap(sti->regions_phys[i], len) :
ioremap_nocache(sti->regions_phys[i], len) );
#else
if (len)
glob_cfg->region_ptrs[i] = sti->regions_phys[i];
#endif
DPRINTK(("region #%d: phys %08lx, virt %08x, len=%lukB, "
DPRINTK(("region #%d: phys %08lx, region_ptr %08x, len=%lukB, "
"btlb=%d, sysonly=%d, cache=%d, last=%d\n",
i, sti->regions_phys[i], glob_cfg->region_ptrs[i],
len/1024,
......
......@@ -34,36 +34,20 @@
* for them to fix it and steal their solution. prumpf
*/
#define STI_WAIT 1
#include <asm/io.h> /* for USE_HPPA_IOREMAP */
#if USE_HPPA_IOREMAP
#include <asm/io.h>
#define STI_PTR(p) (p)
#define PTR_STI(p) (p)
static inline int STI_CALL( unsigned long func,
void *flags, void *inptr, void *outptr, void *glob_cfg )
{
int (*f)(void *,void *,void *,void *);
f = (void*)func;
return f(flags, inptr, outptr, glob_cfg);
}
#else /* !USE_HPPA_IOREMAP */
#define STI_WAIT 1
#define STI_PTR(p) ( virt_to_phys(p) )
#define PTR_STI(p) ( phys_to_virt((long)p) )
#define STI_CALL(func, flags, inptr, outptr, glob_cfg) \
({ \
pdc_sti_call( func, (unsigned long)STI_PTR(flags), \
(unsigned long)STI_PTR(inptr), \
(unsigned long)STI_PTR(outptr), \
(unsigned long)STI_PTR(glob_cfg)); \
#define PTR_STI(p) ( phys_to_virt((unsigned long)p) )
#define STI_CALL(func, flags, inptr, outptr, glob_cfg) \
({ \
pdc_sti_call( func, STI_PTR(flags), \
STI_PTR(inptr), \
STI_PTR(outptr), \
STI_PTR(glob_cfg)); \
})
#endif /* USE_HPPA_IOREMAP */
#define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x)
#define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y)
......@@ -352,8 +336,9 @@ struct sti_struct {
struct sti_conf_outptr outptr; /* configuration */
struct sti_conf_outptr_ext outptr_ext;
/* PCI data structures (pg. 17ff from sti.pdf) */
struct pci_dev *pd;
/* PCI data structures (pg. 17ff from sti.pdf) */
u8 rm_entry[16]; /* pci region mapper array == pci config space offset */
/* pointer to the fb_info where this STI device is used */
......
......@@ -3,7 +3,7 @@
* Low level Frame buffer driver for HP workstations with
* STI (standard text interface) video firmware.
*
* Copyright (C) 2001-2005 Helge Deller <deller@gmx.de>
* Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
* Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
*
* Based on:
......@@ -514,7 +514,7 @@ rattlerSetupPlanes(struct stifb_info *fb)
SETUP_HW(fb);
WRITE_BYTE(1, fb, REG_16b1);
fb_memset(fb->info.fix.smem_start, 0xff,
fb_memset((void*)fb->info.fix.smem_start, 0xff,
fb->info.var.yres*fb->info.fix.line_length);
CRX24_SET_OVLY_MASK(fb);
......@@ -908,83 +908,6 @@ SETUP_HCRX(struct stifb_info *fb)
/* ------------------- driver specific functions --------------------------- */
#define TMPBUFLEN 2048
static ssize_t
stifb_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
struct inode *inode = file->f_dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
char tmpbuf[TMPBUFLEN];
if (!info || ! info->screen_base)
return -ENODEV;
if (p >= info->fix.smem_len)
return 0;
if (count >= info->fix.smem_len)
count = info->fix.smem_len;
if (count + p > info->fix.smem_len)
count = info->fix.smem_len - p;
if (count > sizeof(tmpbuf))
count = sizeof(tmpbuf);
if (count) {
char *base_addr;
base_addr = info->screen_base;
memcpy_fromio(&tmpbuf, base_addr+p, count);
count -= copy_to_user(buf, &tmpbuf, count);
if (!count)
return -EFAULT;
*ppos += count;
}
return count;
}
static ssize_t
stifb_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
struct inode *inode = file->f_dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
unsigned long p = *ppos;
size_t c;
int err;
char tmpbuf[TMPBUFLEN];
if (!info || !info->screen_base)
return -ENODEV;
if (p > info->fix.smem_len)
return -ENOSPC;
if (count >= info->fix.smem_len)
count = info->fix.smem_len;
err = 0;
if (count + p > info->fix.smem_len) {
count = info->fix.smem_len - p;
err = -ENOSPC;
}
p += (unsigned long)info->screen_base;
c = count;
while (c) {
int len = c > sizeof(tmpbuf) ? sizeof(tmpbuf) : c;
err = -EFAULT;
if (copy_from_user(&tmpbuf, buf, len))
break;
memcpy_toio(p, &tmpbuf, len);
c -= len;
p += len;
buf += len;
*ppos += len;
}
if (count-c)
return (count-c);
return err;
}
static int
stifb_setcolreg(u_int regno, u_int red, u_int green,
u_int blue, u_int transp, struct fb_info *info)
......@@ -1137,8 +1060,6 @@ stifb_init_display(struct stifb_info *fb)
static struct fb_ops stifb_ops = {
.owner = THIS_MODULE,
.fb_read = stifb_read,
.fb_write = stifb_write,
.fb_setcolreg = stifb_setcolreg,
.fb_blank = stifb_blank,
.fb_fillrect = cfb_fillrect,
......@@ -1162,7 +1083,7 @@ stifb_init_fb(struct sti_struct *sti, int bpp_pref)
char *dev_name;
int bpp, xres, yres;
fb = kmalloc(sizeof(*fb), GFP_ATOMIC);
fb = kzalloc(sizeof(*fb), GFP_ATOMIC);
if (!fb) {
printk(KERN_ERR "stifb: Could not allocate stifb structure\n");
return -ENODEV;
......@@ -1171,7 +1092,6 @@ stifb_init_fb(struct sti_struct *sti, int bpp_pref)
info = &fb->info;
/* set struct to a known state */
memset(fb, 0, sizeof(*fb));
fix = &info->fix;
var = &info->var;
......@@ -1234,7 +1154,7 @@ stifb_init_fb(struct sti_struct *sti, int bpp_pref)
case S9000_ID_TOMCAT: /* Dual CRX, behaves else like a CRX */
/* FIXME: TomCat supports two heads:
* fb.iobase = REGION_BASE(fb_info,3);
* fb.screen_base = (void*) REGION_BASE(fb_info,2);
* fb.screen_base = ioremap_nocache(REGION_BASE(fb_info,2),xxx);
* for now we only support the left one ! */
xres = fb->ngle_rom.x_size_visible;
yres = fb->ngle_rom.y_size_visible;
......@@ -1327,7 +1247,8 @@ stifb_init_fb(struct sti_struct *sti, int bpp_pref)
strcpy(fix->id, "stifb");
info->fbops = &stifb_ops;
info->screen_base = (void*) REGION_BASE(fb,1);
info->screen_base = ioremap_nocache(REGION_BASE(fb,1), fix->smem_len);
info->screen_size = fix->smem_len;
info->flags = FBINFO_DEFAULT;
info->pseudo_palette = &fb->pseudo_palette;
......
......@@ -210,6 +210,8 @@ static __inline__ int atomic_read(const atomic_t *v)
#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
#define ATOMIC_INIT(i) ((atomic_t) { (i) })
#define smp_mb__before_atomic_dec() smp_mb()
......@@ -267,6 +269,7 @@ atomic64_read(const atomic64_t *v)
#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
#define atomic64_dec_and_test(v) (atomic64_dec_return(v) == 0)
#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i),(v)) == 0)
#endif /* __LP64__ */
......
......@@ -48,7 +48,7 @@ extern void flush_user_icache_range_asm(unsigned long, unsigned long);
extern void flush_kernel_icache_range_asm(unsigned long, unsigned long);
extern void flush_user_dcache_range_asm(unsigned long, unsigned long);
extern void flush_kernel_dcache_range_asm(unsigned long, unsigned long);
extern void flush_kernel_dcache_page(void *);
extern void flush_kernel_dcache_page_asm(void *);
extern void flush_kernel_icache_page(void *);
extern void disable_sr_hashing(void); /* turns off space register hashing */
extern void disable_sr_hashing_asm(int); /* low level support for above */
......
......@@ -62,7 +62,7 @@ extern void flush_dcache_page(struct page *page);
#define flush_dcache_mmap_unlock(mapping) \
write_unlock_irq(&(mapping)->tree_lock)
#define flush_icache_page(vma,page) do { flush_kernel_dcache_page(page_address(page)); flush_kernel_icache_page(page_address(page)); } while (0)
#define flush_icache_page(vma,page) do { flush_kernel_dcache_page(page); flush_kernel_icache_page(page_address(page)); } while (0)
#define flush_icache_range(s,e) do { flush_kernel_dcache_range_asm(s,e); flush_kernel_icache_range_asm(s,e); } while (0)
......@@ -184,6 +184,21 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
}
static inline void
flush_anon_page(struct page *page, unsigned long vmaddr)
{
if (PageAnon(page))
flush_user_dcache_page(vmaddr);
}
#define ARCH_HAS_FLUSH_ANON_PAGE
static inline void
flush_kernel_dcache_page(struct page *page)
{
flush_kernel_dcache_page_asm(page_address(page));
}
#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void);
#endif
......
......@@ -25,35 +25,11 @@ extern unsigned long parisc_vmerge_max_size;
* eg dev->hpa or 0xfee00000.
*/
#ifdef CONFIG_DEBUG_IOREMAP
#ifdef CONFIG_64BIT
#define NYBBLE_SHIFT 60
#else
#define NYBBLE_SHIFT 28
#endif
extern void gsc_bad_addr(unsigned long addr);
extern void __raw_bad_addr(const volatile void __iomem *addr);
#define gsc_check_addr(addr) \
if ((addr >> NYBBLE_SHIFT) != 0xf) { \
gsc_bad_addr(addr); \
addr |= 0xfUL << NYBBLE_SHIFT; \
}
#define __raw_check_addr(addr) \
if (((unsigned long)addr >> NYBBLE_SHIFT) != 0xe) \
__raw_bad_addr(addr); \
addr = (void __iomem *)((unsigned long)addr | (0xfUL << NYBBLE_SHIFT));
#else
#define gsc_check_addr(addr)
#define __raw_check_addr(addr)
#endif
static inline unsigned char gsc_readb(unsigned long addr)
{
long flags;
unsigned char ret;
gsc_check_addr(addr);
__asm__ __volatile__(
" rsm 2,%0\n"
" ldbx 0(%2),%1\n"
......@@ -68,8 +44,6 @@ static inline unsigned short gsc_readw(unsigned long addr)
long flags;
unsigned short ret;
gsc_check_addr(addr);
__asm__ __volatile__(
" rsm 2,%0\n"
" ldhx 0(%2),%1\n"
......@@ -83,8 +57,6 @@ static inline unsigned int gsc_readl(unsigned long addr)
{
u32 ret;
gsc_check_addr(addr);
__asm__ __volatile__(
" ldwax 0(%1),%0\n"
: "=r" (ret) : "r" (addr) );
......@@ -95,7 +67,6 @@ static inline unsigned int gsc_readl(unsigned long addr)
static inline unsigned long long gsc_readq(unsigned long addr)
{
unsigned long long ret;
gsc_check_addr(addr);
#ifdef __LP64__
__asm__ __volatile__(
......@@ -112,8 +83,6 @@ static inline unsigned long long gsc_readq(unsigned long addr)
static inline void gsc_writeb(unsigned char val, unsigned long addr)
{
long flags;
gsc_check_addr(addr);
__asm__ __volatile__(
" rsm 2,%0\n"
" stbs %1,0(%2)\n"
......@@ -124,8 +93,6 @@ static inline void gsc_writeb(unsigned char val, unsigned long addr)
static inline void gsc_writew(unsigned short val, unsigned long addr)
{
long flags;
gsc_check_addr(addr);
__asm__ __volatile__(
" rsm 2,%0\n"
" sths %1,0(%2)\n"
......@@ -135,8 +102,6 @@ static inline void gsc_writew(unsigned short val, unsigned long addr)
static inline void gsc_writel(unsigned int val, unsigned long addr)
{
gsc_check_addr(addr);
__asm__ __volatile__(
" stwas %0,0(%1)\n"
: : "r" (val), "r" (addr) );
......@@ -144,8 +109,6 @@ static inline void gsc_writel(unsigned int val, unsigned long addr)
static inline void gsc_writeq(unsigned long long val, unsigned long addr)
{
gsc_check_addr(addr);
#ifdef __LP64__
__asm__ __volatile__(
" stda %0,0(%1)\n"
......@@ -180,14 +143,7 @@ extern inline void * ioremap_nocache(unsigned long offset, unsigned long size)
extern void iounmap(void __iomem *addr);
/*
* USE_HPPA_IOREMAP is the magic flag to enable or disable real ioremap()
* functionality. It's currently disabled because it may not work on some
* machines.
*/
#define USE_HPPA_IOREMAP 0
#if USE_HPPA_IOREMAP
static inline unsigned char __raw_readb(const volatile void __iomem *addr)
{
return (*(volatile unsigned char __force *) (addr));
......@@ -221,57 +177,6 @@ static inline void __raw_writeq(unsigned long long b, volatile void __iomem *add
{
*(volatile unsigned long long __force *) addr = b;
}
#else /* !USE_HPPA_IOREMAP */
static inline unsigned char __raw_readb(const volatile void __iomem *addr)
{
__raw_check_addr(addr);
return gsc_readb((unsigned long) addr);
}
static inline unsigned short __raw_readw(const volatile void __iomem *addr)
{
__raw_check_addr(addr);
return gsc_readw((unsigned long) addr);
}
static inline unsigned int __raw_readl(const volatile void __iomem *addr)
{
__raw_check_addr(addr);
return gsc_readl((unsigned long) addr);
}
static inline unsigned long long __raw_readq(const volatile void __iomem *addr)
{
__raw_check_addr(addr);
return gsc_readq((unsigned long) addr);
}
static inline void __raw_writeb(unsigned char b, volatile void __iomem *addr)
{
__raw_check_addr(addr);
gsc_writeb(b, (unsigned long) addr);
}
static inline void __raw_writew(unsigned short b, volatile void __iomem *addr)
{
__raw_check_addr(addr);
gsc_writew(b, (unsigned long) addr);
}
static inline void __raw_writel(unsigned int b, volatile void __iomem *addr)
{
__raw_check_addr(addr);
gsc_writel(b, (unsigned long) addr);
}
static inline void __raw_writeq(unsigned long long b, volatile void __iomem *addr)
{
__raw_check_addr(addr);
gsc_writeq(b, (unsigned long) addr);
}
#endif /* !USE_HPPA_IOREMAP */
/* readb can never be const, so use __fswab instead of le*_to_cpu */
#define readb(addr) __raw_readb(addr)
......
......@@ -4,16 +4,16 @@
#include <linux/percpu.h>
#include <asm/atomic.h>
typedef atomic_t local_t;
typedef atomic_long_t local_t;
#define LOCAL_INIT(i) ATOMIC_INIT(i)
#define local_read(v) atomic_read(v)
#define local_set(v,i) atomic_set(v,i)
#define LOCAL_INIT(i) ATOMIC_LONG_INIT(i)
#define local_read(v) atomic_long_read(v)
#define local_set(v,i) atomic_long_set(v,i)
#define local_inc(v) atomic_inc(v)
#define local_dec(v) atomic_dec(v)
#define local_add(i, v) atomic_add(i, v)
#define local_sub(i, v) atomic_sub(i, v)
#define local_inc(v) atomic_long_inc(v)
#define local_dec(v) atomic_long_dec(v)
#define local_add(i, v) atomic_long_add(i, v)
#define local_sub(i, v) atomic_long_sub(i, v)
#define __local_inc(v) ((v)->counter++)
#define __local_dec(v) ((v)->counter--)
......
......@@ -26,7 +26,7 @@ static inline void
copy_user_page(void *vto, void *vfrom, unsigned long vaddr, struct page *pg)
{
copy_user_page_asm(vto, vfrom);
flush_kernel_dcache_page(vto);
flush_kernel_dcache_page_asm(vto);
/* XXX: ppc flushes icache too, should we? */
}
......@@ -40,14 +40,19 @@ clear_user_page(void *page, unsigned long vaddr, struct page *pg)
/*
* These are used to make use of C type-checking..
*/
#ifdef __LP64__
typedef struct { unsigned long pte; } pte_t;
#else
typedef struct {
unsigned long pte;
unsigned long flags;
} pte_t;
#define STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
typedef struct { unsigned long pte;
#if !defined(CONFIG_64BIT)
unsigned long future_flags;
/* XXX: it's possible to remove future_flags and change BITS_PER_PTE_ENTRY
to 2, but then strangely the identical 32bit kernel boots on a
c3000(pa20), but not any longer on a 715(pa11).
Still investigating... HelgeD.
*/
#endif
} pte_t; /* either 32 or 64bit */
/* NOTE: even on 64 bits, these entries are __u32 because we allocate
* the pmd and pgd in ZONE_DMA (i.e. under 4GB) */
typedef struct { __u32 pmd; } pmd_t;
......@@ -55,25 +60,44 @@ typedef struct { __u32 pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
#define pte_val(x) ((x).pte)
#ifdef __LP64__
#define pte_flags(x) (*(__u32 *)&((x).pte))
#else
#define pte_flags(x) ((x).flags)
#endif
/* These do not work lvalues, so make sure we don't use them as such. */
#define pmd_val(x) ((x).pmd + 0)
#define pgd_val(x) ((x).pgd + 0)
#define pgprot_val(x) ((x).pgprot)
#define __pmd_val_set(x,n) (x).pmd = (n)
#define __pgd_val_set(x,n) (x).pgd = (n)
#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
#define __pmd_val_set(x,n) (x).pmd = (n)
#define __pgd_val_set(x,n) (x).pgd = (n)
#else
/*
* .. while these make it easier on the compiler
*/
typedef unsigned long pte_t;
typedef __u32 pmd_t;
typedef __u32 pgd_t;
typedef unsigned long pgprot_t;
#define pte_val(x) (x)
#define pmd_val(x) (x)
#define pgd_val(x) (x)
#define pgprot_val(x) (x)
#define __pte(x) (x)
#define __pmd(x) (x)
#define __pgd(x) (x)
#define __pgprot(x) (x)
#define __pmd_val_set(x,n) (x) = (n)
#define __pgd_val_set(x,n) (x) = (n)
#endif /* STRICT_MM_TYPECHECKS */
typedef struct __physmem_range {
unsigned long start_pfn;
unsigned long pages; /* PAGE_SIZE pages */
......
......@@ -289,4 +289,9 @@ static inline void pcibios_add_platform_entries(struct pci_dev *dev)
{
}
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't need to penalize isa irq's */
}
#endif /* __ASM_PARISC_PCI_H */
......@@ -6,9 +6,8 @@
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
......
......@@ -134,14 +134,22 @@ static __inline__ int __raw_write_trylock(raw_rwlock_t *rw)
return 1;
}
static __inline__ int __raw_is_read_locked(raw_rwlock_t *rw)
/*
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
static __inline__ int __raw_read_can_lock(raw_rwlock_t *rw)
{
return rw->counter > 0;
return rw->counter >= 0;
}
static __inline__ int __raw_is_write_locked(raw_rwlock_t *rw)
/*
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
static __inline__ int __raw_write_can_lock(raw_rwlock_t *rw)
{
return rw->counter < 0;
return !rw->counter;
}
#endif /* __ASM_SPINLOCK_H */
......@@ -49,7 +49,8 @@ struct thread_info {
#endif /* !__ASSEMBLY */
#define PREEMPT_ACTIVE 0x10000000
#define PREEMPT_ACTIVE_BIT 28
#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT)
/*
* thread information flags
......
......@@ -157,19 +157,6 @@ config DEBUG_INFO
If unsure, say N.
config DEBUG_IOREMAP
bool "Enable ioremap() debugging"
depends on DEBUG_KERNEL && PARISC
help
Enabling this option will cause the kernel to distinguish between
ioremapped and physical addresses. It will print a backtrace (at
most one every 10 seconds), hopefully allowing you to see which
drivers need work. Fixing all these problems is a prerequisite
for turning on USE_HPPA_IOREMAP. The warnings are harmless;
the kernel has enough information to fix the broken drivers
automatically, but we'd like to make it more efficient by not
having to do that.
config DEBUG_FS
bool "Debug Filesystem"
depends on SYSFS
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment