Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3 from Florian Tobias Schandinat

It includes:
 - two fixes for OMAP HDMI
 - one fix to make new OMAP functions behave as they are supposed to
 - one Kconfig dependency fix
 - two fixes for viafb for modesetting on VX900 hardware

* tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6:
  OMAPDSS: APPLY: make ovl_enable/disable synchronous
  OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  viafb: fix IGA1 modesetting on VX900
  viafb: select HW scaling on VX900 for IGA2
  OMAPDSS: HDMI: hot plug detect fix
  OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled

drivers/video/omap2/displays/Kconfig

@@ -12,7 +12,7 @@ config PANEL_GENERIC_DPI
 
 config PANEL_DVI
 	tristate "DVI output"
-	depends on OMAP2_DSS_DPI
+	depends on OMAP2_DSS_DPI && I2C
 	help
 	  Driver for external monitors, connected via DVI. The driver uses i2c
 	  to read EDID information from the monitor.

drivers/video/omap2/dss/apply.c

@@ -1276,6 +1276,9 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 
 	spin_unlock_irqrestore(&data_lock, flags);
 
+	/* wait for overlay to be enabled */
+	wait_pending_extra_info_updates();
+
 	mutex_unlock(&apply_lock);
 
 	return 0;
@@ -1313,6 +1316,9 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 
 	spin_unlock_irqrestore(&data_lock, flags);
 
+	/* wait for the overlay to be disabled */
+	wait_pending_extra_info_updates();
+
 	mutex_unlock(&apply_lock);
 
 	return 0;

drivers/video/omap2/dss/hdmi.c

@@ -165,9 +165,25 @@ static int hdmi_runtime_get(void)
 
 	DSSDBG("hdmi_runtime_get\n");
 
+	/*
+	 * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled.
+	 * This should be removed later.
+	 */
+	r = dss_runtime_get();
+	if (r < 0)
+		goto err_get_dss;
+
 	r = pm_runtime_get_sync(&hdmi.pdev->dev);
 	WARN_ON(r < 0);
-	return r < 0 ? r : 0;
+	if (r < 0)
+		goto err_get_hdmi;
+
+	return 0;
+
+err_get_hdmi:
+	dss_runtime_put();
+err_get_dss:
+	return r;
 }
 
 static void hdmi_runtime_put(void)
@@ -178,6 +194,12 @@ static void hdmi_runtime_put(void)
 
 	r = pm_runtime_put_sync(&hdmi.pdev->dev);
 	WARN_ON(r < 0);
+
+	/*
+	 * HACK: This is added to complement the dss_runtime_get() call in
+	 * hdmi_runtime_get(). This should be removed later.
+	 */
+	dss_runtime_put();
 }
 
 int hdmi_init_display(struct omap_dss_device *dssdev)

drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c

@@ -479,14 +479,7 @@ int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data,
 
 bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data)
 {
-	int r;
-
-	void __iomem *base = hdmi_core_sys_base(ip_data);
-
-	/* HPD */
-	r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1);
-
-	return r == 1;
+	return gpio_get_value(ip_data->hpd_gpio);
 }
 
 static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,

drivers/video/via/hw.c

@@ -1810,7 +1810,11 @@ static void hw_init(void)
 		break;
 	}
 
+	/* magic required on VX900 for correct modesetting on IGA1 */
+	via_write_reg_mask(VIACR, 0x45, 0x00, 0x01);
+
 	/* probably this should go to the scaling code one day */
+	via_write_reg_mask(VIACR, 0xFD, 0, 0x80); /* VX900 hw scale on IGA2 */
 	viafb_write_regx(scaling_parameters, ARRAY_SIZE(scaling_parameters));
 
 	/* Fill VPIT Parameters */