Commit d1d0c04b authored by Andrew Lunn's avatar Andrew Lunn Committed by Jason Cooper

ARM: Kirkwood: Convert ib62x0 to pinctrl.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarSimon Baatz <gmbnomis@gmail.com>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 5d183ef9
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
......@@ -16,6 +17,39 @@ chosen {
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_nand
&pmx_led_os_red &pmx_power_off
&pmx_led_os_green &pmx_led_usb_transfer
&pmx_button_reset &pmx_button_usb_copy >;
pinctrl-names = "default";
pmx_led_os_red: pmx-led-os-red {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_power_off: pmx-power-off {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_led_os_green: pmx-led-os-green {
marvell,pins = "mpp25";
marvell,function = "gpio";
};
pmx_led_usb_transfer: pmx-led-usb-transfer {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_button_usb_copy: pmx-button-usb-copy {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
......
......@@ -22,36 +22,15 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static unsigned int ib62x0_mpp_config[] __initdata = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP22_GPIO, /* OS LED red */
MPP24_GPIO, /* Power off device */
MPP25_GPIO, /* OS LED green */
MPP27_GPIO, /* USB transfer LED */
MPP28_GPIO, /* Reset button */
MPP29_GPIO, /* USB Copy button */
0
};
void __init ib62x0_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(ib62x0_mpp_config);
kirkwood_ge00_init(&ib62x0_ge00_data);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment