i2c: core: Allow drivers to disable i2c-core irq mapping

By default the i2c-core will try to get an irq with index 0 on ACPI / of
instantiated devices. This is troublesome on some ACPI systems where the
irq info at index 0 in the CRS table may contain nonsense and/or point
to an irqchip for which there is no Linux driver.

If this happens then before this commit the driver's probe method would
never get called because i2c_device_probe will try to get an irq by
calling acpi_dev_gpio_irq_get which will always return -EPROBE in this
case, as it waits for a matching irqchip driver to load. Thus causing
the driver to not get a chance to bind.

This commit adds a new disable_i2c_core_irq_mapping flag to struct
i2c_driver which a driver can set to tell the core to skip irq mapping.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/i2c-core.c

@@ -985,7 +985,9 @@ static int i2c_device_probe(struct device *dev)
 	if (!client)
 		return 0;
 
-	if (!client->irq) {
+	driver = to_i2c_driver(dev->driver);
+
+	if (!client->irq && !driver->disable_i2c_core_irq_mapping) {
 		int irq = -ENOENT;
 
 		if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
@@ -1007,8 +1009,6 @@ static int i2c_device_probe(struct device *dev)
 		client->irq = irq;
 	}
 
-	driver = to_i2c_driver(dev->driver);
-
 	/*
 	 * An I2C ID table is not mandatory, if and only if, a suitable Device
 	 * Tree match table entry is supplied for the probing device.

include/linux/i2c.h

@@ -149,6 +149,7 @@ enum i2c_alert_protocol {
  * @detect: Callback for device detection
  * @address_list: The I2C addresses to probe (for detect)
  * @clients: List of detected clients we created (for i2c-core use only)
+ * @disable_i2c_core_irq_mapping: Tell the i2c-core to not do irq-mapping
  *
  * The driver.owner field should be set to the module owner of this driver.
  * The driver.name field should be set to the name of this driver.
@@ -212,6 +213,8 @@ struct i2c_driver {
 	int (*detect)(struct i2c_client *, struct i2c_board_info *);
 	const unsigned short *address_list;
 	struct list_head clients;
+
+	bool disable_i2c_core_irq_mapping;
 };
 #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)