regulator: qcom_smd: add regulator ops for pm8941 lnldo

After "regulator: qcom_smd: add list_voltage callback" patch adding
pm8941 lnldo regulators would bug on list_voltages as it is a fixed
regulator without any linear range.
This patch fixes that issue by adding dedicated ops for pm8941 lnldo
without list_voltages callback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org # v4.6

drivers/regulator/qcom_smd-regulator.c

@@ -148,6 +148,17 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
 	.set_load = rpm_reg_set_load,
 };
 
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+
+	.get_voltage = rpm_reg_get_voltage,
+	.set_voltage = rpm_reg_set_voltage,
+
+	.set_load = rpm_reg_set_load,
+};
+
 static const struct regulator_ops rpm_switch_ops = {
 	.enable = rpm_reg_enable,
 	.disable = rpm_reg_disable,
@@ -248,7 +259,7 @@ static const struct regulator_desc pm8941_nldo = {
 static const struct regulator_desc pm8941_lnldo = {
 	.fixed_uV = 1740000,
 	.n_voltages = 1,
-	.ops = &rpm_smps_ldo_ops,
+	.ops = &rpm_smps_ldo_ops_fixed,
 };
 
 static const struct regulator_desc pm8941_switch = {