wlcore: set max num of Rx BA sessions per chip

Maximum number of supported RX BA sessions depends on chip type.
wl18xx supports 5 RX BA sessions while wl12xx supports 3.
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/ti/wl12xx/main.c

@@ -723,6 +723,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 	wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4;
 	wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5;
 	wl->max_channels_5 = WL12XX_MAX_CHANNELS_5GHZ;
+	wl->ba_rx_session_count_max = WL12XX_RX_BA_MAX_SESSIONS;
 out:
 	return ret;
 }

drivers/net/wireless/ti/wl12xx/wl12xx.h

@@ -63,6 +63,8 @@
 
 #define WL12XX_NUM_MAC_ADDRESSES 2
 
+#define WL12XX_RX_BA_MAX_SESSIONS 3
+
 struct wl127x_rx_mem_pool_addr {
 	u32 addr;
 	u32 addr_extra;

drivers/net/wireless/ti/wl18xx/main.c

@@ -678,6 +678,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl)
 	wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC;
 	wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC;
 	wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ;
+	wl->ba_rx_session_count_max = WL18XX_RX_BA_MAX_SESSIONS;
 out:
 	return ret;
 }

drivers/net/wireless/ti/wl18xx/wl18xx.h

@@ -29,7 +29,7 @@
 #define WL18XX_IFTYPE_VER	5
 #define WL18XX_MAJOR_VER	WLCORE_FW_VER_IGNORE
 #define WL18XX_SUBTYPE_VER	WLCORE_FW_VER_IGNORE
-#define WL18XX_MINOR_VER	28
+#define WL18XX_MINOR_VER	39
 
 #define WL18XX_CMD_MAX_SIZE          740
 
@@ -40,6 +40,8 @@
 
 #define WL18XX_NUM_MAC_ADDRESSES 3
 
+#define WL18XX_RX_BA_MAX_SESSIONS 5
+
 struct wl18xx_priv {
 	/* buffer for sending commands to FW */
 	u8 cmd_buf[WL18XX_CMD_MAX_SIZE];

drivers/net/wireless/ti/wlcore/acx.h

@@ -728,8 +728,6 @@ struct wl1271_acx_ht_information {
 	u8 padding[2];
 } __packed;
 
-#define RX_BA_MAX_SESSIONS 3
-
 struct wl1271_acx_ba_initiator_policy {
 	struct acx_header header;
 

drivers/net/wireless/ti/wlcore/main.c

@@ -4784,7 +4784,7 @@ static int wl1271_op_ampdu_action(struct ieee80211_hw *hw,
 			break;
 		}
 
-		if (wl->ba_rx_session_count >= RX_BA_MAX_SESSIONS) {
+		if (wl->ba_rx_session_count >= wl->ba_rx_session_count_max) {
 			ret = -EBUSY;
 			wl1271_error("exceeded max RX BA sessions");
 			break;

drivers/net/wireless/ti/wlcore/wlcore.h

@@ -390,6 +390,9 @@ struct wl1271 {
 	/* number of currently active RX BA sessions */
 	int ba_rx_session_count;
 
+	/* Maximum number of supported RX BA sessions */
+	int ba_rx_session_count_max;
+
 	/* AP-mode - number of currently connected stations */
 	int active_sta_count;