Commit d224a93d authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits)
  sh: Fixup SH-2 BUG() trap handling.
  sh: Use early_param() for earlyprintk parsing.
  sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
  sh: Fixup .data.page_aligned.
  sh: Hook up SH7722 scif ipr interrupts.
  sh: Fixup sh_bios() trap handling.
  sh: SH-MobileR SH7722 CPU support.
  sh: Fixup dma_cache_sync() callers.
  sh: Convert remaining remap_area_pages() users to ioremap_page_range().
  sh: Fixup kernel_execve() for syscall cleanups.
  sh: Fix get_wchan().
  sh: BUG() handling through trapa vector.
  rtc: rtc-sh: alarm support.
  rtc: rtc-sh: fix rtc for out-by-one for the month.
  sh: Kill off unused SE7619 I/O ops.
  serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.
  sh: Split out atomic ops logically.
  sh: Fix Solution Engine 7619 build.
  sh: Trivial build fixes for SH-2 support.
  sh: IPR IRQ updates for SH7619/SH7206.
  ...
parents b57bd066 e9cfc147
...@@ -479,7 +479,7 @@ config SH_CLK_MD ...@@ -479,7 +479,7 @@ config SH_CLK_MD
int "CPU Mode Pin Setting" int "CPU Mode Pin Setting"
depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
help help
MD2 - MD0 Setting. MD2 - MD0 pin setting.
menu "CPU Frequency scaling" menu "CPU Frequency scaling"
...@@ -580,18 +580,6 @@ config NR_CPUS ...@@ -580,18 +580,6 @@ config NR_CPUS
source "kernel/Kconfig.preempt" source "kernel/Kconfig.preempt"
config CPU_HAS_SR_RB
bool "CPU has SR.RB"
depends on CPU_SH3 || CPU_SH4
default y
help
This will enable the use of SR.RB register bank usage. Processors
that are lacking this bit must have another method in place for
accomplishing what is taken care of by the banked registers.
See <file:Documentation/sh/register-banks.txt> for further
information on SR.RB and register banking in the kernel in general.
config NODES_SHIFT config NODES_SHIFT
int int
default "1" default "1"
......
...@@ -31,7 +31,8 @@ config EARLY_SCIF_CONSOLE_PORT ...@@ -31,7 +31,8 @@ config EARLY_SCIF_CONSOLE_PORT
hex "SCIF port for early console" hex "SCIF port for early console"
depends on EARLY_SCIF_CONSOLE depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780 default "0xffe00000" if CPU_SUBTYPE_SH7780
default "0xfffe9800" if CPU_SUBTYPE_SH72060 default "0xfffe9800" if CPU_SUBTYPE_SH7206
default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xffe80000" if CPU_SH4 default "0xffe80000" if CPU_SH4
config EARLY_PRINTK config EARLY_PRINTK
......
...@@ -179,7 +179,7 @@ maketools: include/linux/version.h FORCE ...@@ -179,7 +179,7 @@ maketools: include/linux/version.h FORCE
all: zImage all: zImage
zImage: vmlinux zImage uImage uImage.srec vmlinux.srec: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
compressed: zImage compressed: zImage
...@@ -190,5 +190,8 @@ archclean: ...@@ -190,5 +190,8 @@ archclean:
CLEAN_FILES += include/asm-sh/machtypes.h CLEAN_FILES += include/asm-sh/machtypes.h
define archhelp define archhelp
@echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)' @echo '* zImage - Compressed kernel image'
@echo ' vmlinux.srec - Create an ELF S-record'
@echo ' uImage - Create a bootable image for U-Boot'
@echo ' uImage.srec - Create an S-record for U-Boot'
endef endef
...@@ -16,8 +16,8 @@ ...@@ -16,8 +16,8 @@
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <asm/io.h> #include <linux/interrupt.h>
#include <asm/irq.h> #include <linux/io.h>
#include <asm/landisk/iodata_landisk.h> #include <asm/landisk/iodata_landisk.h>
static void enable_landisk_irq(unsigned int irq); static void enable_landisk_irq(unsigned int irq);
......
...@@ -10,6 +10,7 @@ ...@@ -10,6 +10,7 @@
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/se7206.h> #include <asm/se7206.h>
#define INTSTS0 0x31800000 #define INTSTS0 0x31800000
...@@ -18,6 +19,13 @@ ...@@ -18,6 +19,13 @@
#define INTMSK1 0x31800006 #define INTMSK1 0x31800006
#define INTSEL 0x31800008 #define INTSEL 0x31800008
#define IRQ0_IRQ 64
#define IRQ1_IRQ 65
#define IRQ3_IRQ 67
#define INTC_IPR01 0xfffe0818
#define INTC_ICR1 0xfffe0802
static void disable_se7206_irq(unsigned int irq) static void disable_se7206_irq(unsigned int irq)
{ {
unsigned short val; unsigned short val;
...@@ -39,7 +47,7 @@ static void disable_se7206_irq(unsigned int irq) ...@@ -39,7 +47,7 @@ static void disable_se7206_irq(unsigned int irq)
case IRQ1_IRQ: case IRQ1_IRQ:
msk0 |= 0x000f; msk0 |= 0x000f;
break; break;
case IRQ2_IRQ: case IRQ3_IRQ:
msk0 |= 0x0f00; msk0 |= 0x0f00;
msk1 |= 0x00ff; msk1 |= 0x00ff;
break; break;
...@@ -70,7 +78,7 @@ static void enable_se7206_irq(unsigned int irq) ...@@ -70,7 +78,7 @@ static void enable_se7206_irq(unsigned int irq)
case IRQ1_IRQ: case IRQ1_IRQ:
msk0 &= ~0x000f; msk0 &= ~0x000f;
break; break;
case IRQ2_IRQ: case IRQ3_IRQ:
msk0 &= ~0x0f00; msk0 &= ~0x0f00;
msk1 &= ~0x00ff; msk1 &= ~0x00ff;
break; break;
...@@ -96,7 +104,7 @@ static void eoi_se7206_irq(unsigned int irq) ...@@ -96,7 +104,7 @@ static void eoi_se7206_irq(unsigned int irq)
case IRQ1_IRQ: case IRQ1_IRQ:
sts0 &= ~0x000f; sts0 &= ~0x000f;
break; break;
case IRQ2_IRQ: case IRQ3_IRQ:
sts0 &= ~0x0f00; sts0 &= ~0x0f00;
sts1 &= ~0x00ff; sts1 &= ~0x00ff;
break; break;
...@@ -106,7 +114,7 @@ static void eoi_se7206_irq(unsigned int irq) ...@@ -106,7 +114,7 @@ static void eoi_se7206_irq(unsigned int irq)
} }
static struct irq_chip se7206_irq_chip __read_mostly = { static struct irq_chip se7206_irq_chip __read_mostly = {
.name = "SE7206-FPGA-IRQ", .name = "SE7206-FPGA",
.mask = disable_se7206_irq, .mask = disable_se7206_irq,
.unmask = enable_se7206_irq, .unmask = enable_se7206_irq,
.mask_ack = disable_se7206_irq, .mask_ack = disable_se7206_irq,
......
...@@ -2,4 +2,4 @@ ...@@ -2,4 +2,4 @@
# Makefile for the 7619 SolutionEngine specific parts of the kernel # Makefile for the 7619 SolutionEngine specific parts of the kernel
# #
obj-y := setup.o io.o obj-y := setup.o
/*
*
* linux/arch/sh/boards/se/7619/io.c
*
* Copyright (C) 2006 Yoshinori Sato
*
* I/O routine for Hitachi 7619 SolutionEngine.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/se7619.h>
#include <asm/irq.h>
/* FIXME: M3A-ZAB7 Compact Flash Slot support */
static inline void delay(void)
{
ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */
}
#define badio(name,port) \
printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \
#name, (port), (__u32) __builtin_return_address(0))
unsigned char se7619___inb(unsigned long port)
{
badio(inb, port);
return 0;
}
unsigned char se7619___inb_p(unsigned long port)
{
badio(inb_p, port);
delay();
return 0;
}
unsigned short se7619___inw(unsigned long port)
{
badio(inw, port);
return 0;
}
unsigned int se7619___inl(unsigned long port)
{
badio(inl, port);
return 0;
}
void se7619___outb(unsigned char value, unsigned long port)
{
badio(outb, port);
}
void se7619___outb_p(unsigned char value, unsigned long port)
{
badio(outb_p, port);
delay();
}
void se7619___outw(unsigned short value, unsigned long port)
{
badio(outw, port);
}
void se7619___outl(unsigned int value, unsigned long port)
{
badio(outl, port);
}
void se7619___insb(unsigned long port, void *addr, unsigned long count)
{
badio(inw, port);
}
void se7619___insw(unsigned long port, void *addr, unsigned long count)
{
badio(inw, port);
}
void se7619___insl(unsigned long port, void *addr, unsigned long count)
{
badio(insl, port);
}
void se7619___outsb(unsigned long port, const void *addr, unsigned long count)
{
badio(insl, port);
}
void se7619___outsw(unsigned long port, const void *addr, unsigned long count)
{
badio(insl, port);
}
void se7619___outsl(unsigned long port, const void *addr, unsigned long count)
{
badio(outsw, port);
}
...@@ -9,7 +9,6 @@ ...@@ -9,7 +9,6 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/se7619.h>
#include <asm/machvec.h> #include <asm/machvec.h>
/* /*
...@@ -19,25 +18,5 @@ ...@@ -19,25 +18,5 @@
struct sh_machine_vector mv_se __initmv = { struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine", .mv_name = "SolutionEngine",
.mv_nr_irqs = 108, .mv_nr_irqs = 108,
.mv_inb = se7619___inb,
.mv_inw = se7619___inw,
.mv_inl = se7619___inl,
.mv_outb = se7619___outb,
.mv_outw = se7619___outw,
.mv_outl = se7619___outl,
.mv_inb_p = se7619___inb_p,
.mv_inw_p = se7619___inw,
.mv_inl_p = se7619___inl,
.mv_outb_p = se7619___outb_p,
.mv_outw_p = se7619___outw,
.mv_outl_p = se7619___outl,
.mv_insb = se7619___insb,
.mv_insw = se7619___insw,
.mv_insl = se7619___insl,
.mv_outsb = se7619___outsb,
.mv_outsw = se7619___outsw,
.mv_outsl = se7619___outsl,
}; };
ALIAS_MV(se) ALIAS_MV(se)
...@@ -8,13 +8,49 @@ ...@@ -8,13 +8,49 @@
# Copyright (C) 1999 Stuart Menefy # Copyright (C) 1999 Stuart Menefy
# #
targets := zImage MKIMAGE := $(srctree)/scripts/mkuboot.sh
#
# Assign safe dummy values if these variables are not defined,
# in order to suppress error message.
#
CONFIG_PAGE_OFFSET ?= 0x80000000
CONFIG_MEMORY_START ?= 0x0c000000
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
CONFIG_ZERO_PAGE_OFFSET
targets := zImage vmlinux.srec uImage uImage.srec
subdir- := compressed subdir- := compressed
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy) $(call if_changed,objcopy)
@echo 'Kernel: $@ is ready' @echo ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: FORCE $(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
KERNEL_LOAD := $(shell printf "0x%8x" $$[$(CONFIG_PAGE_OFFSET) + \
$(CONFIG_MEMORY_START) + \
$(CONFIG_ZERO_PAGE_OFFSET)+0x1000])
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
@echo ' Image $@ is ready'
OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
$(call if_changed,objcopy)
OBJCOPYFLAGS_uImage.srec := -I binary -O srec
$(obj)/uImage.srec: $(obj)/uImage
$(call if_changed,objcopy)
clean-files += uImage uImage.srec vmlinux.srec
...@@ -15,13 +15,7 @@ endif ...@@ -15,13 +15,7 @@ endif
# #
# IMAGE_OFFSET is the load offset of the compression loader # IMAGE_OFFSET is the load offset of the compression loader
# Assign dummy values if these 2 variables are not defined,
# in order to suppress error message.
# #
CONFIG_PAGE_OFFSET ?= 0x80000000
CONFIG_MEMORY_START ?= 0x0c000000
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET) + \ IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET) + \
$(CONFIG_MEMORY_START) + \ $(CONFIG_MEMORY_START) + \
$(CONFIG_BOOT_LINK_OFFSET)]) $(CONFIG_BOOT_LINK_OFFSET)])
......
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
.text .text
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/page.h>
.global startup .global startup
startup: startup:
...@@ -97,7 +98,7 @@ init_stack_addr: ...@@ -97,7 +98,7 @@ init_stack_addr:
decompress_kernel_addr: decompress_kernel_addr:
.long decompress_kernel .long decompress_kernel
kernel_start_addr: kernel_start_addr:
.long _text+0x1000 .long _text+PAGE_SIZE
.align 9 .align 9
fake_headers_as_bzImage: fake_headers_as_bzImage:
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/addrspace.h> #include <asm/addrspace.h>
#include <asm/page.h>
#ifdef CONFIG_SH_STANDARD_BIOS #ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h> #include <asm/sh_bios.h>
#endif #endif
...@@ -229,7 +230,7 @@ long* stack_start = &user_stack[STACK_SIZE]; ...@@ -229,7 +230,7 @@ long* stack_start = &user_stack[STACK_SIZE];
void decompress_kernel(void) void decompress_kernel(void)
{ {
output_data = 0; output_data = 0;
output_ptr = P2SEGADDR((unsigned long)&_text+0x1000); output_ptr = P2SEGADDR((unsigned long)&_text+PAGE_SIZE);
free_mem_ptr = (unsigned long)&_end; free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
......
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.18 # Linux kernel version: 2.6.19
# Tue Oct 3 11:14:13 2006 # Thu Dec 7 17:13:04 2006
# #
CONFIG_SUPERH=y CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
...@@ -10,6 +10,9 @@ CONFIG_GENERIC_HWEIGHT=y ...@@ -10,6 +10,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# #
...@@ -33,6 +36,7 @@ CONFIG_SYSVIPC=y ...@@ -33,6 +36,7 @@ CONFIG_SYSVIPC=y
# CONFIG_UTS_NS is not set # CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set # CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set # CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set # CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE="" CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y
...@@ -114,6 +118,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" ...@@ -114,6 +118,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_SH_LANDISK=y CONFIG_SH_LANDISK=y
# CONFIG_SH_TITAN is not set # CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set # CONFIG_SH_SHMIN is not set
# CONFIG_SH_7206_SOLUTION_ENGINE is not set
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
# CONFIG_SH_UNKNOWN is not set # CONFIG_SH_UNKNOWN is not set
# #
...@@ -125,6 +131,12 @@ CONFIG_CPU_SH4=y ...@@ -125,6 +131,12 @@ CONFIG_CPU_SH4=y
# SH-2 Processor Support # SH-2 Processor Support
# #
# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
#
# SH-2A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# #
# SH-3 Processor Support # SH-3 Processor Support
...@@ -160,6 +172,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y ...@@ -160,6 +172,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# #
# CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# #
# SH4AL-DSP Processor Support # SH4AL-DSP Processor Support
...@@ -175,6 +188,9 @@ CONFIG_PAGE_OFFSET=0x80000000 ...@@ -175,6 +188,9 @@ CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000 CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y CONFIG_VSYSCALL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set
...@@ -196,16 +212,21 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 ...@@ -196,16 +212,21 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# Processor features # Processor features
# #
CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set # CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set # CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
# #
# Timer support # Timer support
# #
CONFIG_SH_TMU=y CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_PCLK_FREQ=33333333
# #
...@@ -216,9 +237,7 @@ CONFIG_SH_PCLK_FREQ=33333333 ...@@ -216,9 +237,7 @@ CONFIG_SH_PCLK_FREQ=33333333
# #
# DMA support # DMA support
# #
CONFIG_SH_DMA=y # CONFIG_SH_DMA is not set
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# #
# Companion Chips # Companion Chips
...@@ -226,6 +245,11 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 ...@@ -226,6 +245,11 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
# CONFIG_HD6446X_SERIES is not set # CONFIG_HD6446X_SERIES is not set
CONFIG_HEARTBEAT=y CONFIG_HEARTBEAT=y
#
# Additional SuperH Device Drivers
#
# CONFIG_PUSH_SWITCH is not set
# #
# Kernel features # Kernel features
# #
...@@ -340,11 +364,13 @@ CONFIG_IP_PNP=y ...@@ -340,11 +364,13 @@ CONFIG_IP_PNP=y
# CONFIG_INET_TUNNEL is not set # CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set # CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# #
# IP: Virtual Server Configuration # IP: Virtual Server Configuration
...@@ -361,24 +387,12 @@ CONFIG_NETFILTER=y ...@@ -361,24 +387,12 @@ CONFIG_NETFILTER=y
# Core Netfilter Configuration # Core Netfilter Configuration
# #
# CONFIG_NETFILTER_NETLINK is not set # CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NETFILTER_XTABLES is not set # CONFIG_NETFILTER_XTABLES is not set
# #
# IP: Netfilter Configuration # IP: Netfilter Configuration
# #
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_QUEUE=m
# #
...@@ -476,6 +490,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ...@@ -476,6 +490,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set # CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set # CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
# #
...@@ -519,6 +539,7 @@ CONFIG_BLK_DEV_AEC62XX=y ...@@ -519,6 +539,7 @@ CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_IT821X is not set
...@@ -542,6 +563,7 @@ CONFIG_IDEDMA_AUTO=y ...@@ -542,6 +563,7 @@ CONFIG_IDEDMA_AUTO=y
# #
# CONFIG_RAID_ATTRS is not set # CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y CONFIG_SCSI_PROC_FS=y
...@@ -561,6 +583,7 @@ CONFIG_BLK_DEV_SD=y ...@@ -561,6 +583,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
# #
# SCSI Transports # SCSI Transports
...@@ -602,12 +625,12 @@ CONFIG_SCSI_MULTI_LUN=y ...@@ -602,12 +625,12 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
...@@ -615,6 +638,7 @@ CONFIG_SCSI_MULTI_LUN=y ...@@ -615,6 +638,7 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# #
# PCMCIA SCSI adapter support # PCMCIA SCSI adapter support
...@@ -757,6 +781,7 @@ CONFIG_8139CP=y ...@@ -757,6 +781,7 @@ CONFIG_8139CP=y
# CONFIG_IXGB is not set # CONFIG_IXGB is not set
# CONFIG_S2IO is not set # CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set # CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# #
# Token Ring devices # Token Ring devices
...@@ -871,10 +896,6 @@ CONFIG_HW_RANDOM=y ...@@ -871,10 +896,6 @@ CONFIG_HW_RANDOM=y
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set # CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set # CONFIG_DRM is not set
# #
...@@ -889,7 +910,6 @@ CONFIG_HW_RANDOM=y ...@@ -889,7 +910,6 @@ CONFIG_HW_RANDOM=y
# TPM devices # TPM devices
# #
# CONFIG_TCG_TPM is not set # CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# #
# I2C support # I2C support
...@@ -905,6 +925,7 @@ CONFIG_HW_RANDOM=y ...@@ -905,6 +925,7 @@ CONFIG_HW_RANDOM=y
# #
# Dallas's 1-wire bus # Dallas's 1-wire bus
# #
# CONFIG_W1 is not set
# #
# Hardware Monitoring support # Hardware Monitoring support
...@@ -916,10 +937,6 @@ CONFIG_HWMON=y ...@@ -916,10 +937,6 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
...@@ -1037,6 +1054,7 @@ CONFIG_USB=y ...@@ -1037,6 +1054,7 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set # CONFIG_USB_OTG is not set
# #
...@@ -1106,7 +1124,6 @@ CONFIG_USB_HIDINPUT=y ...@@ -1106,7 +1124,6 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set # CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# #
# USB Imaging devices # USB Imaging devices
...@@ -1121,6 +1138,7 @@ CONFIG_USB_HIDINPUT=y ...@@ -1121,6 +1138,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_KAWETH is not set # CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m CONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set # CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y CONFIG_USB_MON=y
...@@ -1156,6 +1174,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m ...@@ -1156,6 +1174,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_PL2303=m
...@@ -1167,6 +1186,7 @@ CONFIG_USB_SERIAL_PL2303=m ...@@ -1167,6 +1186,7 @@ CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
# #
# USB Miscellaneous drivers # USB Miscellaneous drivers
...@@ -1188,6 +1208,7 @@ CONFIG_USB_EMI26=m ...@@ -1188,6 +1208,7 @@ CONFIG_USB_EMI26=m
CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set # CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set # CONFIG_USB_TEST is not set
# #
...@@ -1254,6 +1275,7 @@ CONFIG_EXT3_FS=y ...@@ -1254,6 +1275,7 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set # CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y CONFIG_FS_MBCACHE=y
...@@ -1264,6 +1286,7 @@ CONFIG_REISERFS_FS=y ...@@ -1264,6 +1286,7 @@ CONFIG_REISERFS_FS=y
# CONFIG_JFS_FS is not set # CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set # CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set # CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set # CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y CONFIG_ROMFS_FS=y
...@@ -1414,6 +1437,7 @@ CONFIG_NLS_CODEPAGE_932=y ...@@ -1414,6 +1437,7 @@ CONFIG_NLS_CODEPAGE_932=y
# #
# Kernel hacking # Kernel hacking
# #
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set # CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set # CONFIG_MAGIC_SYSRQ is not set
...@@ -1422,6 +1446,7 @@ CONFIG_ENABLE_MUST_CHECK=y ...@@ -1422,6 +1446,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_LOG_BUF_SHIFT=14 CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_SH_STANDARD_BIOS=y CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set # CONFIG_EARLY_PRINTK is not set
...@@ -1445,6 +1470,4 @@ CONFIG_SH_STANDARD_BIOS=y ...@@ -1445,6 +1470,4 @@ CONFIG_SH_STANDARD_BIOS=y
# CONFIG_CRC16 is not set # CONFIG_CRC16 is not set
CONFIG_CRC32=y CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y CONFIG_PLIST=y
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc4 # Linux kernel version: 2.6.19
# Sun Nov 5 16:20:10 2006 # Wed Dec 6 14:40:15 2006
# #
CONFIG_SUPERH=y CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
...@@ -11,6 +11,8 @@ CONFIG_GENERIC_HARDIRQS=y ...@@ -11,6 +11,8 @@ CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_TIME is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# #
...@@ -34,24 +36,23 @@ CONFIG_LOCALVERSION="" ...@@ -34,24 +36,23 @@ CONFIG_LOCALVERSION=""
# CONFIG_IKCONFIG is not set # CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set # CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE="" CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y CONFIG_EMBEDDED=y
CONFIG_UID16=y # CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y # CONFIG_KALLSYMS is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set # CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y CONFIG_PRINTK=y
CONFIG_BUG=y CONFIG_BUG=y
CONFIG_ELF_CORE=y # CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y # CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set # CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set # CONFIG_EPOLL is not set
CONFIG_SLAB=y CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y # CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_TINY_SHMEM=y CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0 CONFIG_BASE_SMALL=1
# CONFIG_SLOB is not set # CONFIG_SLOB is not set
# #
...@@ -160,6 +161,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y ...@@ -160,6 +161,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
# #
# CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# #
# SH4AL-DSP Processor Support # SH4AL-DSP Processor Support
...@@ -172,7 +174,10 @@ CONFIG_CPU_SUBTYPE_SH7206=y ...@@ -172,7 +174,10 @@ CONFIG_CPU_SUBTYPE_SH7206=y
# #
CONFIG_PAGE_OFFSET=0x00000000 CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000 CONFIG_MEMORY_SIZE=0x04000000
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set
...@@ -194,6 +199,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 ...@@ -194,6 +199,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# Processor features # Processor features
# #
# CONFIG_CPU_LITTLE_ENDIAN is not set # CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_SH_FPU is not set # CONFIG_SH_FPU is not set
# CONFIG_SH_FPU_EMU is not set # CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set # CONFIG_SH_DSP is not set
...@@ -203,6 +209,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 ...@@ -203,6 +209,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# #
CONFIG_SH_CMT=y CONFIG_SH_CMT=y
# CONFIG_SH_MTU2 is not set # CONFIG_SH_MTU2 is not set
CONFIG_SH_TIMER_IRQ=140
# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_MD=6 CONFIG_SH_CLK_MD=6
...@@ -221,6 +229,11 @@ CONFIG_SH_CLK_MD=6 ...@@ -221,6 +229,11 @@ CONFIG_SH_CLK_MD=6
# #
# CONFIG_HD6446X_SERIES is not set # CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
#
# CONFIG_PUSH_SWITCH is not set
# #
# Kernel features # Kernel features
# #
...@@ -279,9 +292,6 @@ CONFIG_NET=y ...@@ -279,9 +292,6 @@ CONFIG_NET=y
# CONFIG_NETDEBUG is not set # CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set # CONFIG_PACKET is not set
# CONFIG_UNIX is not set # CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set # CONFIG_NET_KEY is not set
CONFIG_INET=y CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set # CONFIG_IP_MULTICAST is not set
...@@ -297,9 +307,9 @@ CONFIG_IP_FIB_HASH=y ...@@ -297,9 +307,9 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_IPCOMP is not set # CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set # CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set # CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set # CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_CUBIC=y
...@@ -371,7 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" ...@@ -371,7 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# #
CONFIG_MTD=y CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set # CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
...@@ -422,7 +432,7 @@ CONFIG_MTD_CFI_UTIL=y ...@@ -422,7 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_START=0x20000000
CONFIG_MTD_PHYSMAP_LEN=0x1000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=4 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_UCLINUX is not set
...@@ -468,10 +478,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 ...@@ -468,10 +478,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y # CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set # CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set # CONFIG_ATA_OVER_ETH is not set
...@@ -519,7 +526,50 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ...@@ -519,7 +526,50 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# #
# Network device support # Network device support
# #
# CONFIG_NETDEVICES is not set CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set # CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_NET_POLL_CONTROLLER is not set
...@@ -536,7 +586,26 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ...@@ -536,7 +586,26 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# #
# Input device support # Input device support
# #
# CONFIG_INPUT is not set CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# #
# Hardware I/O ports # Hardware I/O ports
...@@ -564,8 +633,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y ...@@ -564,8 +633,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set # CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y # CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_PTY_COUNT=256
# #
# IPMI # IPMI
...@@ -576,7 +644,7 @@ CONFIG_LEGACY_PTY_COUNT=256 ...@@ -576,7 +644,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards # Watchdog Cards
# #
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set # CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
...@@ -610,12 +678,8 @@ CONFIG_HW_RANDOM=y ...@@ -610,12 +678,8 @@ CONFIG_HW_RANDOM=y
# #
# Hardware Monitoring support # Hardware Monitoring support
# #
CONFIG_HWMON=y # CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set # CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# #
# Multimedia devices # Multimedia devices
...@@ -630,7 +694,7 @@ CONFIG_HWMON=y ...@@ -630,7 +694,7 @@ CONFIG_HWMON=y
# #
# Graphics support # Graphics support
# #
CONFIG_FIRMWARE_EDID=y # CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set # CONFIG_FB is not set
# #
...@@ -701,8 +765,7 @@ CONFIG_FIRMWARE_EDID=y ...@@ -701,8 +765,7 @@ CONFIG_FIRMWARE_EDID=y
# #
# File systems # File systems
# #
CONFIG_EXT2_FS=y # CONFIG_EXT2_FS is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set # CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set # CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_FS is not set
...@@ -755,7 +818,7 @@ CONFIG_RAMFS=y ...@@ -755,7 +818,7 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set # CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set # CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set # CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y # CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_FS is not set
...@@ -793,8 +856,9 @@ CONFIG_MSDOS_PARTITION=y ...@@ -793,8 +856,9 @@ CONFIG_MSDOS_PARTITION=y
# #
# Kernel hacking # Kernel hacking
# #
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set # CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y # CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set # CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_KERNEL is not set
...@@ -819,7 +883,7 @@ CONFIG_LOG_BUF_SHIFT=14 ...@@ -819,7 +883,7 @@ CONFIG_LOG_BUF_SHIFT=14
# #
# Library routines # Library routines
# #
CONFIG_CRC_CCITT=y # CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set # CONFIG_CRC16 is not set
CONFIG_CRC32=y CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
......
This diff is collapsed.
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
#include <asm/push-switch.h> #include <asm/push-switch.h>
#define DRV_NAME "push-switch" #define DRV_NAME "push-switch"
#define DRV_VERSION "0.1.0" #define DRV_VERSION "0.1.1"
static ssize_t switch_show(struct device *dev, static ssize_t switch_show(struct device *dev,
struct device_attribute *attr, struct device_attribute *attr,
...@@ -32,10 +32,10 @@ static void switch_timer(unsigned long data) ...@@ -32,10 +32,10 @@ static void switch_timer(unsigned long data)
schedule_work(&psw->work); schedule_work(&psw->work);
} }
static void switch_work_handler(void *data) static void switch_work_handler(struct work_struct *work)
{ {
struct platform_device *pdev = data; struct push_switch *psw = container_of(work, struct push_switch, work);
struct push_switch *psw = platform_get_drvdata(pdev); struct platform_device *pdev = psw->pdev;
psw->state = 0; psw->state = 0;
...@@ -76,12 +76,15 @@ static int switch_drv_probe(struct platform_device *pdev) ...@@ -76,12 +76,15 @@ static int switch_drv_probe(struct platform_device *pdev)
} }
} }
INIT_WORK(&psw->work, switch_work_handler, pdev); INIT_WORK(&psw->work, switch_work_handler);
init_timer(&psw->debounce); init_timer(&psw->debounce);
psw->debounce.function = switch_timer; psw->debounce.function = switch_timer;
psw->debounce.data = (unsigned long)psw; psw->debounce.data = (unsigned long)psw;
/* Workqueue API brain-damage */
psw->pdev = pdev;
platform_set_drvdata(pdev, psw); platform_set_drvdata(pdev, psw);
return 0; return 0;
......
...@@ -6,6 +6,7 @@ obj-$(CONFIG_CPU_SH2) = sh2/ ...@@ -6,6 +6,7 @@ obj-$(CONFIG_CPU_SH2) = sh2/
obj-$(CONFIG_CPU_SH2A) = sh2a/ obj-$(CONFIG_CPU_SH2A) = sh2a/
obj-$(CONFIG_CPU_SH3) = sh3/ obj-$(CONFIG_CPU_SH3) = sh3/
obj-$(CONFIG_CPU_SH4) = sh4/ obj-$(CONFIG_CPU_SH4) = sh4/
obj-$(CONFIG_CPU_SH4A) += sh4a/
obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_UBC_WAKEUP) += ubc.o
obj-$(CONFIG_SH_ADC) += adc.o obj-$(CONFIG_SH_ADC) += adc.o
......
...@@ -178,14 +178,20 @@ interrupt_entry: ...@@ -178,14 +178,20 @@ interrupt_entry:
8: .long do_exception_error 8: .long do_exception_error
trap_entry: trap_entry:
/* verbose BUG trapa entry check */
mov #0x3e,r8
cmp/ge r8,r9
bf/s 1f
add #-0x10,r9 add #-0x10,r9
add #0x10,r9
1:
shll2 r9 ! TRA shll2 r9 ! TRA
mov #OFF_TRA,r8 mov #OFF_TRA,r8
add r15,r8 add r15,r8
mov.l r9,@r8 mov.l r9,@r8
mov r9,r8 mov r9,r8
#ifdef CONFIG_TRACE_IRQFLAGS #ifdef CONFIG_TRACE_IRQFLAGS
mov.l 5f, r9 mov.l 2f, r9
jsr @r9 jsr @r9
nop nop
#endif #endif
...@@ -194,12 +200,8 @@ trap_entry: ...@@ -194,12 +200,8 @@ trap_entry:
nop nop
.align 2 .align 2
1: .long syscall_exit
2: .long break_point_trap_software
3: .long NR_syscalls
4: .long sys_call_table
#ifdef CONFIG_TRACE_IRQFLAGS #ifdef CONFIG_TRACE_IRQFLAGS
5: .long trace_hardirqs_on 2: .long trace_hardirqs_on
#endif #endif
#if defined(CONFIG_SH_STANDARD_BIOS) #if defined(CONFIG_SH_STANDARD_BIOS)
...@@ -264,7 +266,7 @@ ENTRY(address_error_handler) ...@@ -264,7 +266,7 @@ ENTRY(address_error_handler)
restore_all: restore_all:
cli cli
#ifdef CONFIG_TRACE_IRQFLAGS #ifdef CONFIG_TRACE_IRQFLAGS
mov.l 3f, r0 mov.l 1f, r0
jsr @r0 jsr @r0
nop nop
#endif #endif
...@@ -309,20 +311,14 @@ restore_all: ...@@ -309,20 +311,14 @@ restore_all:
mov.l @r15,r15 mov.l @r15,r15
rte rte
nop nop
2:
mov.l 1f,r8
mov.l 2f,r9
jmp @r9
lds r8,pr
.align 2 #ifdef CONFIG_TRACE_IRQFLAGS
1: .long trace_hardirqs_off
#endif
$current_thread_info: $current_thread_info:
.long __current_thread_info .long __current_thread_info
$cpu_mode: $cpu_mode:
.long __cpu_mode .long __cpu_mode
#ifdef CONFIG_TRACE_IRQFLAGS
3: .long trace_hardirqs_off
#endif
! common exception handler ! common exception handler
#include "../../entry-common.S" #include "../../entry-common.S"
......
...@@ -51,3 +51,44 @@ static int __init sh7619_devices_setup(void) ...@@ -51,3 +51,44 @@ static int __init sh7619_devices_setup(void)
ARRAY_SIZE(sh7619_devices)); ARRAY_SIZE(sh7619_devices));
} }
__initcall(sh7619_devices_setup); __initcall(sh7619_devices_setup);
#define INTC_IPRC 0xf8080000UL
#define INTC_IPRD 0xf8080002UL
#define CMI0_IRQ 86
#define SCIF0_ERI_IRQ 88
#define SCIF0_RXI_IRQ 89
#define SCIF0_BRI_IRQ 90
#define SCIF0_TXI_IRQ 91
#define SCIF1_ERI_IRQ 92
#define SCIF1_RXI_IRQ 93
#define SCIF1_BRI_IRQ 94
#define SCIF1_TXI_IRQ 95
#define SCIF2_BRI_IRQ 96
#define SCIF2_ERI_IRQ 97
#define SCIF2_RXI_IRQ 98
#define SCIF2_TXI_IRQ 99
static struct ipr_data sh7619_ipr_map[] = {
{ CMI0_IRQ, INTC_IPRC, 1, 2 },
{ SCIF0_ERI_IRQ, INTC_IPRD, 3, 3 },
{ SCIF0_RXI_IRQ, INTC_IPRD, 3, 3 },
{ SCIF0_BRI_IRQ, INTC_IPRD, 3, 3 },
{ SCIF0_TXI_IRQ, INTC_IPRD, 3, 3 },
{ SCIF1_ERI_IRQ, INTC_IPRD, 2, 3 },
{ SCIF1_RXI_IRQ, INTC_IPRD, 2, 3 },
{ SCIF1_BRI_IRQ, INTC_IPRD, 2, 3 },
{ SCIF1_TXI_IRQ, INTC_IPRD, 2, 3 },
{ SCIF2_ERI_IRQ, INTC_IPRD, 1, 3 },
{ SCIF2_RXI_IRQ, INTC_IPRD, 1, 3 },
{ SCIF2_BRI_IRQ, INTC_IPRD, 1, 3 },
{ SCIF2_TXI_IRQ, INTC_IPRD, 1, 3 },
};
void __init init_IRQ_ipr(void)
{
make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map));
}
...@@ -17,22 +17,22 @@ static struct plat_sci_port sci_platform_data[] = { ...@@ -17,22 +17,22 @@ static struct plat_sci_port sci_platform_data[] = {
.mapbase = 0xfffe8000, .mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF, .type = PORT_SCIF,
.irqs = { 240, 241, 242, 243}, .irqs = { 241, 242, 243, 240},
}, { }, {
.mapbase = 0xfffe8800, .mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF, .type = PORT_SCIF,
.irqs = { 244, 245, 246, 247}, .irqs = { 247, 244, 245, 246},
}, { }, {
.mapbase = 0xfffe9000, .mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF, .type = PORT_SCIF,
.irqs = { 248, 249, 250, 251}, .irqs = { 249, 250, 251, 248},
}, { }, {
.mapbase = 0xfffe9800, .mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF, .type = PORT_SCIF,
.irqs = { 252, 253, 254, 255}, .irqs = { 253, 254, 255, 252},
}, { }, {
.flags = 0, .flags = 0,
} }
...@@ -56,3 +56,57 @@ static int __init sh7206_devices_setup(void) ...@@ -56,3 +56,57 @@ static int __init sh7206_devices_setup(void)
ARRAY_SIZE(sh7206_devices)); ARRAY_SIZE(sh7206_devices));
} }
__initcall(sh7206_devices_setup); __initcall(sh7206_devices_setup);
#define INTC_IPR08 0xfffe0c04UL
#define INTC_IPR09 0xfffe0c06UL
#define INTC_IPR14 0xfffe0c10UL
#define CMI0_IRQ 140
#define MTU1_TGI1A 164
#define SCIF0_BRI_IRQ 240
#define SCIF0_ERI_IRQ 241
#define SCIF0_RXI_IRQ 242
#define SCIF0_TXI_IRQ 243
#define SCIF1_BRI_IRQ 244
#define SCIF1_ERI_IRQ 245
#define SCIF1_RXI_IRQ 246
#define SCIF1_TXI_IRQ 247
#define SCIF2_BRI_IRQ 248
#define SCIF2_ERI_IRQ 249
#define SCIF2_RXI_IRQ 250
#define SCIF2_TXI_IRQ 251
#define SCIF3_BRI_IRQ 252
#define SCIF3_ERI_IRQ 253
#define SCIF3_RXI_IRQ 254
#define SCIF3_TXI_IRQ 255
static struct ipr_data sh7206_ipr_map[] = {
{ CMI0_IRQ, INTC_IPR08, 3, 2 },
{ MTU2_TGI1A, INTC_IPR09, 1, 2 },
{ SCIF0_ERI_IRQ, INTC_IPR14, 3, 3 },
{ SCIF0_RXI_IRQ, INTC_IPR14, 3, 3 },
{ SCIF0_BRI_IRQ, INTC_IPR14, 3, 3 },
{ SCIF0_TXI_IRQ, INTC_IPR14, 3, 3 },
{ SCIF1_ERI_IRQ, INTC_IPR14, 2, 3 },
{ SCIF1_RXI_IRQ, INTC_IPR14, 2, 3 },
{ SCIF1_BRI_IRQ, INTC_IPR14, 2, 3 },
{ SCIF1_TXI_IRQ, INTC_IPR14, 2, 3 },
{ SCIF2_ERI_IRQ, INTC_IPR14, 1, 3 },
{ SCIF2_RXI_IRQ, INTC_IPR14, 1, 3 },
{ SCIF2_BRI_IRQ, INTC_IPR14, 1, 3 },
{ SCIF2_TXI_IRQ, INTC_IPR14, 1, 3 },
{ SCIF3_ERI_IRQ, INTC_IPR14, 0, 3 },
{ SCIF3_RXI_IRQ, INTC_IPR14, 0, 3 },
{ SCIF3_BRI_IRQ, INTC_IPR14, 0, 3 },
{ SCIF3_TXI_IRQ, INTC_IPR14, 0, 3 },
};
void __init init_IRQ_ipr(void)
{
make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map));
}
...@@ -12,17 +12,12 @@ obj-$(CONFIG_SH_STORE_QUEUES) += sq.o ...@@ -12,17 +12,12 @@ obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
# Primary on-chip clocks (common) # Primary on-chip clocks (common)
ifndef CONFIG_CPU_SH4A
clock-$(CONFIG_CPU_SH4) := clock-sh4.o clock-$(CONFIG_CPU_SH4) := clock-sh4.o
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o endif
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
# Additional clocks by subtype # Additional clocks by subtype
clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
......
...@@ -119,11 +119,20 @@ int __init detect_cpu_and_cache_system(void) ...@@ -119,11 +119,20 @@ int __init detect_cpu_and_cache_system(void)
break; break;
case 0x3000: case 0x3000:
case 0x3003: case 0x3003:
case 0x3009:
cpu_data->type = CPU_SH7343; cpu_data->type = CPU_SH7343;
cpu_data->icache.ways = 4; cpu_data->icache.ways = 4;
cpu_data->dcache.ways = 4; cpu_data->dcache.ways = 4;
cpu_data->flags |= CPU_HAS_LLSC; cpu_data->flags |= CPU_HAS_LLSC;
break; break;
case 0x3008:
if (prr == 0xa0) {
cpu_data->type = CPU_SH7722;
cpu_data->icache.ways = 4;
cpu_data->dcache.ways = 4;
cpu_data->flags |= CPU_HAS_LLSC;
}
break;
case 0x8000: case 0x8000:
cpu_data->type = CPU_ST40RA; cpu_data->type = CPU_ST40RA;
cpu_data->flags |= CPU_HAS_FPU; cpu_data->flags |= CPU_HAS_FPU;
......
...@@ -14,6 +14,36 @@ ...@@ -14,6 +14,36 @@
#include <linux/io.h> #include <linux/io.h>
#include <asm/sci.h> #include <asm/sci.h>
static struct resource rtc_resources[] = {
[0] = {
.start = 0xffc80000,
.end = 0xffc80000 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 21,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 22,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 20,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static struct plat_sci_port sci_platform_data[] = { static struct plat_sci_port sci_platform_data[] = {
{ {
.mapbase = 0xffe00000, .mapbase = 0xffe00000,
...@@ -39,6 +69,7 @@ static struct platform_device sci_device = { ...@@ -39,6 +69,7 @@ static struct platform_device sci_device = {
}; };
static struct platform_device *sh7750_devices[] __initdata = { static struct platform_device *sh7750_devices[] __initdata = {
&rtc_device,
&sci_device, &sci_device,
}; };
......
...@@ -111,8 +111,9 @@ static int __sq_remap(struct sq_mapping *map, unsigned long flags) ...@@ -111,8 +111,9 @@ static int __sq_remap(struct sq_mapping *map, unsigned long flags)
vma->phys_addr = map->addr; vma->phys_addr = map->addr;
if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr, if (ioremap_page_range((unsigned long)vma->addr,
map->size, flags)) { (unsigned long)vma->addr + map->size,
vma->phys_addr, __pgprot(flags))) {
vunmap(vma->addr); vunmap(vma->addr);
return -EAGAIN; return -EAGAIN;
} }
...@@ -176,7 +177,7 @@ unsigned long sq_remap(unsigned long phys, unsigned int size, ...@@ -176,7 +177,7 @@ unsigned long sq_remap(unsigned long phys, unsigned int size,
map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT); map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
ret = __sq_remap(map, flags); ret = __sq_remap(map, pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
if (unlikely(ret != 0)) if (unlikely(ret != 0))
goto out; goto out;
......
#
# Makefile for the Linux/SuperH SH-4 backends.
#
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7343.o
obj-y += $(clock-y)
/*
* arch/sh/kernel/cpu/sh4/clock-sh7343.c
*
* SH7343/SH7722 support for the clock framework
*
* Copyright (C) 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <asm/clock.h>
#include <asm/freq.h>
/*
* SH7343/SH7722 uses a common set of multipliers and divisors, so this
* is quite simple..
*/
static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
static void master_clk_init(struct clk *clk)
{
clk->parent = clk_get(NULL, "cpu_clk");
}
static void master_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) & 0x000f);
clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
}
static struct clk_ops sh7343_master_clk_ops = {
.init = master_clk_init,
.recalc = master_clk_recalc,
};
static void module_clk_init(struct clk *clk)
{
clk->parent = NULL;
clk->rate = CONFIG_SH_PCLK_FREQ;
}
static struct clk_ops sh7343_module_clk_ops = {
.init = module_clk_init,
};
static void bus_clk_init(struct clk *clk)
{
clk->parent = clk_get(NULL, "cpu_clk");
}
static void bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
}
static struct clk_ops sh7343_bus_clk_ops = {
.init = bus_clk_init,
.recalc = bus_clk_recalc,
};
static void cpu_clk_init(struct clk *clk)
{
clk->parent = clk_get(NULL, "module_clk");
clk->flags |= CLK_RATE_PROPAGATES;
clk_set_rate(clk, clk_get_rate(clk));
}
static void cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
clk->rate = clk->parent->rate * pll_calc() *
multipliers[idx] / divisors[idx];
}
static struct clk_ops sh7343_cpu_clk_ops = {
.init = cpu_clk_init,
.recalc = cpu_clk_recalc,
};
static struct clk_ops *sh7343_clk_ops[] = {
&sh7343_master_clk_ops,
&sh7343_module_clk_ops,
&sh7343_bus_clk_ops,
&sh7343_cpu_clk_ops,
};
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (idx < ARRAY_SIZE(sh7343_clk_ops))
*ops = sh7343_clk_ops[idx];
}
/*
* SH7722 Setup
*
* Copyright (C) 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 81, 83, 82 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7722_devices[] __initdata = {
&sci_device,
};
static int __init sh7722_devices_setup(void)
{
return platform_add_devices(sh7722_devices,
ARRAY_SIZE(sh7722_devices));
}
__initcall(sh7722_devices_setup);
static struct ipr_data sh7722_ipr_map[] = {
/* IRQ, IPR-idx, shift, prio */
{ 16, 0, 12, 2 }, /* TMU0 */
{ 17, 0, 8, 2 }, /* TMU1 */
{ 80, 6, 12, 3 }, /* SCIF ERI */
{ 81, 6, 12, 3 }, /* SCIF RXI */
{ 82, 6, 12, 3 }, /* SCIF BRI */
{ 83, 6, 12, 3 }, /* SCIF TXI */
};
static unsigned long ipr_offsets[] = {
0xa4080000, /* 0: IPRA */
0xa4080004, /* 1: IPRB */
0xa4080008, /* 2: IPRC */
0xa408000c, /* 3: IPRD */
0xa4080010, /* 4: IPRE */
0xa4080014, /* 5: IPRF */
0xa4080018, /* 6: IPRG */
0xa408001c, /* 7: IPRH */
0xa4080020, /* 8: IPRI */
0xa4080024, /* 9: IPRJ */
0xa4080028, /* 10: IPRK */
0xa408002c, /* 11: IPRL */
};
unsigned int map_ipridx_to_addr(int idx)
{
if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
return 0;
return ipr_offsets[idx];
}
void __init init_IRQ_ipr(void)
{
make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map));
}
...@@ -144,16 +144,16 @@ static struct console *early_console = ...@@ -144,16 +144,16 @@ static struct console *early_console =
; ;
static int __initdata keep_early; static int __initdata keep_early;
static int early_console_initialized;
int __init setup_early_printk(char *opt) int __init setup_early_printk(char *buf)
{ {
char *space; if (!buf)
char buf[256]; return 0;
strlcpy(buf, opt, sizeof(buf)); if (early_console_initialized)
space = strchr(buf, ' '); return 0;
if (space) early_console_initialized = 1;
*space = 0;
if (strstr(buf, "keep")) if (strstr(buf, "keep"))
keep_early = 1; keep_early = 1;
...@@ -175,12 +175,14 @@ int __init setup_early_printk(char *opt) ...@@ -175,12 +175,14 @@ int __init setup_early_printk(char *opt)
if (likely(early_console)) if (likely(early_console))
register_console(early_console); register_console(early_console);
return 1; return 0;
} }
__setup("earlyprintk=", setup_early_printk); early_param("earlyprintk", setup_early_printk);
void __init disable_early_printk(void) void __init disable_early_printk(void)
{ {
if (!early_console_initialized || !early_console)
return;
if (!keep_early) { if (!keep_early) {
printk("disabling early console\n"); printk("disabling early console\n");
unregister_console(early_console); unregister_console(early_console);
......
...@@ -79,18 +79,29 @@ debug_kernel_sw: ...@@ -79,18 +79,29 @@ debug_kernel_sw:
.align 2 .align 2
3: .long kgdb_handle_exception 3: .long kgdb_handle_exception
#endif /* CONFIG_SH_KGDB */ #endif /* CONFIG_SH_KGDB */
#ifdef CONFIG_SH_STANDARD_BIOS
bra debug_kernel_fw
nop
#endif
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
.align 2 .align 2
debug_trap: debug_trap:
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
mov r8, r0
shlr2 r0
cmp/eq #0x3f, r0 ! sh_bios() trap
bf 1f
#ifdef CONFIG_SH_KGDB
cmp/eq #0xff, r0 ! XXX: KGDB trap, fix for SH-2.
bf 1f
#endif
mov #OFF_SR, r0 mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register mov.l @(r0,r15), r0 ! get status register
shll r0 shll r0
shll r0 ! kernel space? shll r0 ! kernel space?
bt/s debug_kernel bt/s debug_kernel
1:
#endif #endif
mov.l @r15, r0 ! Restore R0 value mov.l @r15, r0 ! Restore R0 value
mov.l 1f, r8 mov.l 1f, r8
......
...@@ -33,7 +33,8 @@ ENTRY(empty_zero_page) ...@@ -33,7 +33,8 @@ ENTRY(empty_zero_page)
.long 0x00360000 /* INITRD_START */ .long 0x00360000 /* INITRD_START */
.long 0x000a0000 /* INITRD_SIZE */ .long 0x000a0000 /* INITRD_SIZE */
.long 0 .long 0
.balign PAGE_SIZE,0,PAGE_SIZE 1:
.skip PAGE_SIZE - empty_zero_page - 1b
.text .text
/* /*
......
...@@ -470,9 +470,10 @@ unsigned long get_wchan(struct task_struct *p) ...@@ -470,9 +470,10 @@ unsigned long get_wchan(struct task_struct *p)
*/ */
pc = thread_saved_pc(p); pc = thread_saved_pc(p);
if (in_sched_functions(pc)) { if (in_sched_functions(pc)) {
schedule_frame = ((unsigned long *)(long)p->thread.sp)[1]; schedule_frame = (unsigned long)p->thread.sp;
return (unsigned long)((unsigned long *)schedule_frame)[1]; return ((unsigned long *)schedule_frame)[21];
} }
return pc; return pc;
} }
...@@ -498,6 +499,16 @@ asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, ...@@ -498,6 +499,16 @@ asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5,
{ {
struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
/* Rewind */
regs->pc -= 2; regs->pc -= 2;
#ifdef CONFIG_BUG
if (__kernel_text_address(instruction_pointer(regs))) {
u16 insn = *(u16 *)instruction_pointer(regs);
if (insn == TRAPA_BUG_OPCODE)
handle_BUG(regs);
}
#endif
force_sig(SIGTRAP, current); force_sig(SIGTRAP, current);
} }
...@@ -84,8 +84,7 @@ unsigned long memory_start, memory_end; ...@@ -84,8 +84,7 @@ unsigned long memory_start, memory_end;
static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
struct sh_machine_vector** mvp, struct sh_machine_vector** mvp,
unsigned long *mv_io_base, unsigned long *mv_io_base)
int *mv_mmio_enable)
{ {
char c = ' ', *to = command_line, *from = COMMAND_LINE; char c = ' ', *to = command_line, *from = COMMAND_LINE;
int len = 0; int len = 0;
...@@ -112,23 +111,6 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], ...@@ -112,23 +111,6 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
} }
} }
#ifdef CONFIG_EARLY_PRINTK
if (c == ' ' && !memcmp(from, "earlyprintk=", 12)) {
char *ep_end;
if (to != command_line)
to--;
from += 12;
ep_end = strchr(from, ' ');
setup_early_printk(from);
printk("early console enabled\n");
from = ep_end;
}
#endif
if (c == ' ' && !memcmp(from, "sh_mv=", 6)) { if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
char* mv_end; char* mv_end;
char* mv_comma; char* mv_comma;
...@@ -145,7 +127,6 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], ...@@ -145,7 +127,6 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
int ints[3]; int ints[3];
get_options(mv_comma+1, ARRAY_SIZE(ints), ints); get_options(mv_comma+1, ARRAY_SIZE(ints), ints);
*mv_io_base = ints[1]; *mv_io_base = ints[1];
*mv_mmio_enable = ints[2];
mv_len = mv_comma - from; mv_len = mv_comma - from;
} else { } else {
mv_len = mv_end - from; mv_len = mv_end - from;
...@@ -158,6 +139,7 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], ...@@ -158,6 +139,7 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
*mvp = get_mv_byname(mv_name); *mvp = get_mv_byname(mv_name);
} }
c = *(from++); c = *(from++);
if (!c) if (!c)
break; break;
...@@ -177,9 +159,8 @@ static int __init sh_mv_setup(char **cmdline_p) ...@@ -177,9 +159,8 @@ static int __init sh_mv_setup(char **cmdline_p)
struct sh_machine_vector *mv = NULL; struct sh_machine_vector *mv = NULL;
char mv_name[MV_NAME_SIZE] = ""; char mv_name[MV_NAME_SIZE] = "";
unsigned long mv_io_base = 0; unsigned long mv_io_base = 0;
int mv_mmio_enable = 0;
parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable); parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base);
#ifdef CONFIG_SH_UNKNOWN #ifdef CONFIG_SH_UNKNOWN
if (mv == NULL) { if (mv == NULL) {
...@@ -258,6 +239,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -258,6 +239,7 @@ void __init setup_arch(char **cmdline_p)
sh_mv_setup(cmdline_p); sh_mv_setup(cmdline_p);
/* /*
* Find the highest page frame number we have available * Find the highest page frame number we have available
*/ */
...@@ -305,6 +287,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -305,6 +287,7 @@ void __init setup_arch(char **cmdline_p)
PFN_PHYS(pages)); PFN_PHYS(pages));
} }
/* /*
* Reserve the kernel text and * Reserve the kernel text and
* Reserve the bootmem bitmap. We do this in two steps (first step * Reserve the bootmem bitmap. We do this in two steps (first step
...@@ -325,14 +308,18 @@ void __init setup_arch(char **cmdline_p) ...@@ -325,14 +308,18 @@ void __init setup_arch(char **cmdline_p)
ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
if (&__rd_start != &__rd_end) { if (&__rd_start != &__rd_end) {
LOADER_TYPE = 1; LOADER_TYPE = 1;
INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START; INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start; __MEMORY_START;
INITRD_SIZE = (unsigned long)&__rd_end -
(unsigned long)&__rd_start;
} }
if (LOADER_TYPE && INITRD_START) { if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
reserve_bootmem_node(NODE_DATA(0), INITRD_START+__MEMORY_START, INITRD_SIZE); reserve_bootmem_node(NODE_DATA(0), INITRD_START +
initrd_start = INITRD_START + PAGE_OFFSET + __MEMORY_START; __MEMORY_START, INITRD_SIZE);
initrd_start = INITRD_START + PAGE_OFFSET +
__MEMORY_START;
initrd_end = initrd_start + INITRD_SIZE; initrd_end = initrd_start + INITRD_SIZE;
} else { } else {
printk("initrd extends beyond end of memory " printk("initrd extends beyond end of memory "
...@@ -404,7 +391,7 @@ static const char *cpu_name[] = { ...@@ -404,7 +391,7 @@ static const char *cpu_name[] = {
[CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
[CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
[CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343",
[CPU_SH7785] = "SH7785", [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722",
[CPU_SH_NONE] = "Unknown" [CPU_SH_NONE] = "Unknown"
}; };
......
...@@ -70,13 +70,26 @@ DECLARE_EXPORT(__sdivsi3); ...@@ -70,13 +70,26 @@ DECLARE_EXPORT(__sdivsi3);
DECLARE_EXPORT(__ashrdi3); DECLARE_EXPORT(__ashrdi3);
DECLARE_EXPORT(__ashldi3); DECLARE_EXPORT(__ashldi3);
DECLARE_EXPORT(__lshrdi3); DECLARE_EXPORT(__lshrdi3);
DECLARE_EXPORT(__movstr);
DECLARE_EXPORT(__movstrSI16); DECLARE_EXPORT(__movstrSI16);
#if __GNUC__ == 4
DECLARE_EXPORT(__movmem);
#else
DECLARE_EXPORT(__movstr);
#endif
#ifdef CONFIG_CPU_SH4 #ifdef CONFIG_CPU_SH4
#if __GNUC__ == 4
DECLARE_EXPORT(__movmem_i4_even);
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udiv_qrnnd_16);
DECLARE_EXPORT(__udivsi3_i4i);
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstr_i4_odd);
DECLARE_EXPORT(__movstrSI12_i4); DECLARE_EXPORT(__movstrSI12_i4);
#endif /* __GNUC__ == 4 */
#endif #endif
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) #if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
......
...@@ -101,7 +101,7 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, ...@@ -101,7 +101,7 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
*/ */
#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */ #define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */
#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A) #if defined(CONFIG_CPU_SH2)
#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */ #define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */
#else #else
#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */ #define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */
......
...@@ -314,6 +314,12 @@ asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1, ...@@ -314,6 +314,12 @@ asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
#endif #endif
} }
#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A)
#define SYSCALL_ARG3 "trapa #0x23"
#else
#define SYSCALL_ARG3 "trapa #0x13"
#endif
/* /*
* Do a system call from kernel instead of calling sys_execve so we * Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs. * end up with proper pt_regs.
...@@ -324,7 +330,7 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) ...@@ -324,7 +330,7 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
register long __sc4 __asm__ ("r4") = (long) filename; register long __sc4 __asm__ ("r4") = (long) filename;
register long __sc5 __asm__ ("r5") = (long) argv; register long __sc5 __asm__ ("r5") = (long) argv;
register long __sc6 __asm__ ("r6") = (long) envp; register long __sc6 __asm__ ("r6") = (long) envp;
__asm__ __volatile__ ("trapa #0x13" : "=z" (__sc0) __asm__ __volatile__ (SYSCALL_ARG3 : "=z" (__sc0)
: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6) : "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6)
: "memory"); : "memory");
return __sc0; return __sc0;
......
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/kallsyms.h> #include <linux/kallsyms.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/debug_locks.h> #include <linux/debug_locks.h>
#include <linux/limits.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
...@@ -129,6 +130,40 @@ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) ...@@ -129,6 +130,40 @@ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
return -EFAULT; return -EFAULT;
} }
#ifdef CONFIG_BUG
#ifdef CONFIG_DEBUG_BUGVERBOSE
static inline void do_bug_verbose(struct pt_regs *regs)
{
struct bug_frame f;
long len;
if (__copy_from_user(&f, (const void __user *)regs->pc,
sizeof(struct bug_frame)))
return;
len = __strnlen_user(f.file, PATH_MAX) - 1;
if (unlikely(len < 0 || len >= PATH_MAX))
f.file = "<bad filename>";
len = __strnlen_user(f.func, PATH_MAX) - 1;
if (unlikely(len < 0 || len >= PATH_MAX))
f.func = "<bad function>";
printk(KERN_ALERT "kernel BUG in %s() at %s:%d!\n",
f.func, f.file, f.line);
}
#else
static inline void do_bug_verbose(struct pt_regs *regs)
{
}
#endif /* CONFIG_DEBUG_BUGVERBOSE */
#endif /* CONFIG_BUG */
void handle_BUG(struct pt_regs *regs)
{
do_bug_verbose(regs);
die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
}
/* /*
* handle an instruction that does an unaligned memory access by emulating the * handle an instruction that does an unaligned memory access by emulating the
* desired behaviour * desired behaviour
......
...@@ -51,7 +51,7 @@ SECTIONS ...@@ -51,7 +51,7 @@ SECTIONS
} }
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.idt) } .data.page_aligned : { *(.data.page_aligned) }
. = ALIGN(32); . = ALIGN(32);
__per_cpu_start = .; __per_cpu_start = .;
......
...@@ -35,6 +35,9 @@ config CPU_SUBTYPE_ST40 ...@@ -35,6 +35,9 @@ config CPU_SUBTYPE_ST40
select CPU_SH4 select CPU_SH4
select CPU_HAS_INTC2_IRQ select CPU_HAS_INTC2_IRQ
config CPU_SHX2
bool
# #
# Processor subtypes # Processor subtypes
# #
...@@ -180,6 +183,7 @@ config CPU_SUBTYPE_SH7780 ...@@ -180,6 +183,7 @@ config CPU_SUBTYPE_SH7780
config CPU_SUBTYPE_SH7785 config CPU_SUBTYPE_SH7785
bool "Support SH7785 processor" bool "Support SH7785 processor"
select CPU_SH4A select CPU_SH4A
select CPU_SHX2
select CPU_HAS_INTC2_IRQ select CPU_HAS_INTC2_IRQ
comment "SH4AL-DSP Processor Support" comment "SH4AL-DSP Processor Support"
...@@ -192,6 +196,12 @@ config CPU_SUBTYPE_SH7343 ...@@ -192,6 +196,12 @@ config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor" bool "Support SH7343 processor"
select CPU_SH4AL_DSP select CPU_SH4AL_DSP
config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
select CPU_HAS_IPR_IRQ
endmenu endmenu
menu "Memory management options" menu "Memory management options"
...@@ -250,7 +260,7 @@ config 32BIT ...@@ -250,7 +260,7 @@ config 32BIT
config X2TLB config X2TLB
bool "Enable extended TLB mode" bool "Enable extended TLB mode"
depends on CPU_SUBTYPE_SH7785 && MMU && EXPERIMENTAL depends on CPU_SHX2 && MMU && EXPERIMENTAL
help help
Selecting this option will enable the extended mode of the SH-X2 Selecting this option will enable the extended mode of the SH-X2
TLB. For legacy SH-X behaviour and interoperability, say N. For TLB. For legacy SH-X behaviour and interoperability, say N. For
......
...@@ -107,7 +107,7 @@ void __init p3_cache_init(void) ...@@ -107,7 +107,7 @@ void __init p3_cache_init(void)
emit_cache_params(); emit_cache_params();
if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE)) if (ioremap_page_range(P3SEG, P3SEG + (PAGE_SIZE * 4), 0, PAGE_KERNEL))
panic("%s failed.", __FUNCTION__); panic("%s failed.", __FUNCTION__);
for (i = 0; i < cpu_data->dcache.n_aliases; i++) for (i = 0; i < cpu_data->dcache.n_aliases; i++)
......
...@@ -77,6 +77,7 @@ void show_mem(void) ...@@ -77,6 +77,7 @@ void show_mem(void)
printk("%d pages swap cached\n",cached); printk("%d pages swap cached\n",cached);
} }
#ifdef CONFIG_MMU
static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
{ {
pgd_t *pgd; pgd_t *pgd;
...@@ -139,6 +140,7 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) ...@@ -139,6 +140,7 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
set_pte_phys(address, phys, prot); set_pte_phys(address, phys, prot);
} }
#endif /* CONFIG_MMU */
/* References to section boundaries */ /* References to section boundaries */
......
This diff is collapsed.
...@@ -319,6 +319,28 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) ...@@ -319,6 +319,28 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
sci_out(port, SCFCR, fcr_val); sci_out(port, SCFCR, fcr_val);
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
ctrl_outw(0x0000, PORT_PSCR);
} else {
unsigned short data;
data = ctrl_inw(PORT_PSCR);
data &= 0x033f;
data |= 0x0400;
ctrl_outw(data, PORT_PSCR);
ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0);
}
sci_out(port, SCFCR, fcr_val);
}
#else #else
/* For SH7750 */ /* For SH7750 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
......
...@@ -90,6 +90,13 @@ ...@@ -90,6 +90,13 @@
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
# define SCIF_ONLY # define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
# define PORT_PSCR 0xA405011E
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */ # define SCIF_ORER 0x0001 /* overrun error bit */
...@@ -495,6 +502,7 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -495,6 +502,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfe620000) if (port->mapbase == 0xfe620000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7300) #elif defined(CONFIG_CPU_SUBTYPE_SH7300)
static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port)
...@@ -521,6 +529,13 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -521,6 +529,13 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1; return 1;
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port)
{ {
...@@ -550,6 +565,7 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -550,6 +565,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xff925000) if (port->mapbase == 0xff925000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port)
...@@ -558,6 +574,7 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -558,6 +574,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe10000) if (port->mapbase == 0xffe10000)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7206) #elif defined(CONFIG_CPU_SUBTYPE_SH7206)
static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port)
...@@ -570,6 +587,7 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -570,6 +587,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe9800) if (port->mapbase == 0xfffe9800)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7619) #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port)
...@@ -580,6 +598,7 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -580,6 +598,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xf8420000) if (port->mapbase == 0xf8420000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
} }
#endif #endif
......
#ifndef __ASM_SH_ATOMIC_IRQ_H
#define __ASM_SH_ATOMIC_IRQ_H
/*
* To get proper branch prediction for the main line, we must branch
* forward to code at the end of this object's .text section, then
* branch back to restart the operation.
*/
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long flags;
local_irq_save(flags);
*(long *)v += i;
local_irq_restore(flags);
}
static inline void atomic_sub(int i, atomic_t *v)
{
unsigned long flags;
local_irq_save(flags);
*(long *)v -= i;
local_irq_restore(flags);
}
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long temp, flags;
local_irq_save(flags);
temp = *(long *)v;
temp += i;
*(long *)v = temp;
local_irq_restore(flags);
return temp;
}
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long temp, flags;
local_irq_save(flags);
temp = *(long *)v;
temp -= i;
*(long *)v = temp;
local_irq_restore(flags);
return temp;
}
static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
{
unsigned long flags;
local_irq_save(flags);
*(long *)v &= ~mask;
local_irq_restore(flags);
}
static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
{
unsigned long flags;
local_irq_save(flags);
*(long *)v |= mask;
local_irq_restore(flags);
}
#endif /* __ASM_SH_ATOMIC_IRQ_H */
#ifndef __ASM_SH_ATOMIC_LLSC_H
#define __ASM_SH_ATOMIC_LLSC_H
/*
* To get proper branch prediction for the main line, we must branch
* forward to code at the end of this object's .text section, then
* branch back to restart the operation.
*/
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_add \n"
" add %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (i), "r" (&v->counter)
: "t");
}
static inline void atomic_sub(int i, atomic_t *v)
{
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_sub \n"
" sub %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (i), "r" (&v->counter)
: "t");
}
/*
* SH-4A note:
*
* We basically get atomic_xxx_return() for free compared with
* atomic_xxx(). movli.l/movco.l require r0 due to the instruction
* encoding, so the retval is automatically set without having to
* do any special work.
*/
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long temp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_add_return \n"
" add %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
" synco \n"
: "=&z" (temp)
: "r" (i), "r" (&v->counter)
: "t");
return temp;
}
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long temp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_sub_return \n"
" sub %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
" synco \n"
: "=&z" (temp)
: "r" (i), "r" (&v->counter)
: "t");
return temp;
}
static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
{
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_clear_mask \n"
" and %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (~mask), "r" (&v->counter)
: "t");
}
static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
{
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_set_mask \n"
" or %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (mask), "r" (&v->counter)
: "t");
}
#endif /* __ASM_SH_ATOMIC_LLSC_H */
...@@ -17,119 +17,14 @@ typedef struct { volatile int counter; } atomic_t; ...@@ -17,119 +17,14 @@ typedef struct { volatile int counter; } atomic_t;
#include <linux/compiler.h> #include <linux/compiler.h>
#include <asm/system.h> #include <asm/system.h>
/*
* To get proper branch prediction for the main line, we must branch
* forward to code at the end of this object's .text section, then
* branch back to restart the operation.
*/
static inline void atomic_add(int i, atomic_t *v)
{
#ifdef CONFIG_CPU_SH4A #ifdef CONFIG_CPU_SH4A
unsigned long tmp; #include <asm/atomic-llsc.h>
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_add \n"
" add %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (i), "r" (&v->counter)
: "t");
#else #else
unsigned long flags; #include <asm/atomic-irq.h>
local_irq_save(flags);
*(long *)v += i;
local_irq_restore(flags);
#endif
}
static inline void atomic_sub(int i, atomic_t *v)
{
#ifdef CONFIG_CPU_SH4A
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_sub \n"
" sub %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (i), "r" (&v->counter)
: "t");
#else
unsigned long flags;
local_irq_save(flags);
*(long *)v -= i;
local_irq_restore(flags);
#endif #endif
}
/*
* SH-4A note:
*
* We basically get atomic_xxx_return() for free compared with
* atomic_xxx(). movli.l/movco.l require r0 due to the instruction
* encoding, so the retval is automatically set without having to
* do any special work.
*/
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long temp;
#ifdef CONFIG_CPU_SH4A
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_add_return \n"
" add %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
" synco \n"
: "=&z" (temp)
: "r" (i), "r" (&v->counter)
: "t");
#else
unsigned long flags;
local_irq_save(flags);
temp = *(long *)v;
temp += i;
*(long *)v = temp;
local_irq_restore(flags);
#endif
return temp;
}
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long temp;
#ifdef CONFIG_CPU_SH4A
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_sub_return \n"
" sub %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
" synco \n"
: "=&z" (temp)
: "r" (i), "r" (&v->counter)
: "t");
#else
unsigned long flags;
local_irq_save(flags);
temp = *(long *)v;
temp -= i;
*(long *)v = temp;
local_irq_restore(flags);
#endif
return temp;
}
#define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_dec_return(v) atomic_sub_return(1,(v))
#define atomic_inc_return(v) atomic_add_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v))
...@@ -180,50 +75,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) ...@@ -180,50 +75,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
} }
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
{
#ifdef CONFIG_CPU_SH4A
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_clear_mask \n"
" and %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (~mask), "r" (&v->counter)
: "t");
#else
unsigned long flags;
local_irq_save(flags);
*(long *)v &= ~mask;
local_irq_restore(flags);
#endif
}
static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
{
#ifdef CONFIG_CPU_SH4A
unsigned long tmp;
__asm__ __volatile__ (
"1: movli.l @%2, %0 ! atomic_set_mask \n"
" or %1, %0 \n"
" movco.l %0, @%2 \n"
" bf 1b \n"
: "=&z" (tmp)
: "r" (mask), "r" (&v->counter)
: "t");
#else
unsigned long flags;
local_irq_save(flags);
*(long *)v |= mask;
local_irq_restore(flags);
#endif
}
/* Atomic operations are already serializing on SH */ /* Atomic operations are already serializing on SH */
#define smp_mb__before_atomic_dec() barrier() #define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier()
......
#ifndef __ASM_SH_BUG_H #ifndef __ASM_SH_BUG_H
#define __ASM_SH_BUG_H #define __ASM_SH_BUG_H
#ifdef CONFIG_BUG #ifdef CONFIG_BUG
/*
* Tell the user there is some problem. struct bug_frame {
*/ unsigned short opcode;
#define BUG() do { \ unsigned short line;
printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ const char *file;
*(volatile int *)0 = 0; \ const char *func;
};
struct pt_regs;
extern void handle_BUG(struct pt_regs *);
#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */
#ifdef CONFIG_DEBUG_BUGVERBOSE
#define BUG() \
do { \
__asm__ __volatile__ ( \
".align 2\n\t" \
".short %O0\n\t" \
".short %O1\n\t" \
".long %O2\n\t" \
".long %O3\n\t" \
: \
: "n" (TRAPA_BUG_OPCODE), \
"i" (__LINE__), "X" (__FILE__), \
"X" (__FUNCTION__)); \
} while (0)
#else
#define BUG() \
do { \
__asm__ __volatile__ ( \
".align 2\n\t" \
".short %O0\n\t" \
: \
: "n" (TRAPA_BUG_OPCODE)); \
} while (0) } while (0)
#endif /* CONFIG_DEBUG_BUGVERBOSE */
#define HAVE_ARCH_BUG #define HAVE_ARCH_BUG
#endif
#endif /* CONFIG_BUG */
#include <asm-generic/bug.h> #include <asm-generic/bug.h>
#endif #endif /* __ASM_SH_BUG_H */
...@@ -16,9 +16,8 @@ ...@@ -16,9 +16,8 @@
static void __init check_bugs(void) static void __init check_bugs(void)
{ {
extern char *get_cpu_subtype(void);
extern unsigned long loops_per_jiffy; extern unsigned long loops_per_jiffy;
char *p= &init_utsname()->machine[2]; /* "sh" */ char *p = &init_utsname()->machine[2]; /* "sh" */
cpu_data->loops_per_jiffy = loops_per_jiffy; cpu_data->loops_per_jiffy = loops_per_jiffy;
...@@ -40,6 +39,15 @@ static void __init check_bugs(void) ...@@ -40,6 +39,15 @@ static void __init check_bugs(void)
*p++ = '4'; *p++ = '4';
*p++ = 'a'; *p++ = 'a';
break; break;
case CPU_SH73180 ... CPU_SH7722:
*p++ = '4';
*p++ = 'a';
*p++ = 'l';
*p++ = '-';
*p++ = 'd';
*p++ = 's';
*p++ = 'p';
break;
default: default:
*p++ = '?'; *p++ = '?';
*p++ = '!'; *p++ = '!';
......
...@@ -34,7 +34,8 @@ asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); ...@@ -34,7 +34,8 @@ asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
*/ */
asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
int len, __wsum sum, int *src_err_ptr, int *dst_err_ptr); int len, __wsum sum,
int *src_err_ptr, int *dst_err_ptr);
/* /*
* Note: when you get a NULL pointer exception here this means someone * Note: when you get a NULL pointer exception here this means someone
...@@ -43,14 +44,14 @@ asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, ...@@ -43,14 +44,14 @@ asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
* If you use these functions directly please don't forget the * If you use these functions directly please don't forget the
* access_ok(). * access_ok().
*/ */
static __inline__ static inline
__wsum csum_partial_copy_nocheck(const void *src, void *dst, __wsum csum_partial_copy_nocheck(const void *src, void *dst,
int len, __wsum sum) int len, __wsum sum)
{ {
return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL); return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
} }
static __inline__ static inline
__wsum csum_partial_copy_from_user(const void __user *src, void *dst, __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
int len, __wsum sum, int *err_ptr) int len, __wsum sum, int *err_ptr)
{ {
...@@ -62,7 +63,7 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst, ...@@ -62,7 +63,7 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
* Fold a partial checksum * Fold a partial checksum
*/ */
static __inline__ __sum16 csum_fold(__wsum sum) static inline __sum16 csum_fold(__wsum sum)
{ {
unsigned int __dummy; unsigned int __dummy;
__asm__("swap.w %0, %1\n\t" __asm__("swap.w %0, %1\n\t"
...@@ -85,7 +86,7 @@ static __inline__ __sum16 csum_fold(__wsum sum) ...@@ -85,7 +86,7 @@ static __inline__ __sum16 csum_fold(__wsum sum)
* i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted * i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
* for linux by * Arnt Gulbrandsen. * for linux by * Arnt Gulbrandsen.
*/ */
static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{ {
unsigned int sum, __dummy0, __dummy1; unsigned int sum, __dummy0, __dummy1;
...@@ -113,7 +114,7 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) ...@@ -113,7 +114,7 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
return csum_fold(sum); return csum_fold(sum);
} }
static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
unsigned short len, unsigned short len,
unsigned short proto, unsigned short proto,
__wsum sum) __wsum sum)
...@@ -132,6 +133,7 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, ...@@ -132,6 +133,7 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
: "=r" (sum), "=r" (len_proto) : "=r" (sum), "=r" (len_proto)
: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
: "t"); : "t");
return sum; return sum;
} }
...@@ -139,27 +141,25 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, ...@@ -139,27 +141,25 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
* computes the checksum of the TCP/UDP pseudo-header * computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented * returns a 16-bit checksum, already complemented
*/ */
static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
unsigned short len, unsigned short len,
unsigned short proto, unsigned short proto,
__wsum sum) __wsum sum)
{ {
return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
} }
/* /*
* this routine is used for miscellaneous IP-like checksums, mainly * this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c * in icmp.c
*/ */
static inline __sum16 ip_compute_csum(const void *buff, int len)
static __inline__ __sum16 ip_compute_csum(const void *buff, int len)
{ {
return csum_fold (csum_partial(buff, len, 0)); return csum_fold(csum_partial(buff, len, 0));
} }
#define _HAVE_ARCH_IPV6_CSUM #define _HAVE_ARCH_IPV6_CSUM
#ifdef CONFIG_IPV6 static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
const struct in6_addr *daddr, const struct in6_addr *daddr,
__u32 len, unsigned short proto, __u32 len, unsigned short proto,
__wsum sum) __wsum sum)
...@@ -193,13 +193,12 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, ...@@ -193,13 +193,12 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
return csum_fold(sum); return csum_fold(sum);
} }
#endif
/* /*
* Copy and checksum to user * Copy and checksum to user
*/ */
#define HAVE_CSUM_COPY_USER #define HAVE_CSUM_COPY_USER
static __inline__ __wsum csum_and_copy_to_user (const void *src, static inline __wsum csum_and_copy_to_user(const void *src,
void __user *dst, void __user *dst,
int len, __wsum sum, int len, __wsum sum,
int *err_ptr) int *err_ptr)
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ #define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ #define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ #define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
#ifndef CONFIG_CPU_SUBTYPE_SH7780 #ifndef CONFIG_CPU_SH4A
#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ #define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
#endif #endif
......
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
#ifndef __ASM_CPU_SH4_FREQ_H #ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H #define __ASM_CPU_SH4_FREQ_H
#if defined(CONFIG_CPU_SUBTYPE_SH73180) #if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722)
#define FRQCR 0xa4150000 #define FRQCR 0xa4150000
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000 #define FRQCR 0xffc80000
......
...@@ -67,7 +67,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, ...@@ -67,7 +67,7 @@ static inline dma_addr_t dma_map_single(struct device *dev,
if (dev->bus == &pci_bus_type) if (dev->bus == &pci_bus_type)
return virt_to_bus(ptr); return virt_to_bus(ptr);
#endif #endif
dma_cache_sync(ptr, size, dir); dma_cache_sync(dev, ptr, size, dir);
return virt_to_bus(ptr); return virt_to_bus(ptr);
} }
...@@ -81,7 +81,7 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, ...@@ -81,7 +81,7 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
for (i = 0; i < nents; i++) { for (i = 0; i < nents; i++) {
#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) #if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
dma_cache_sync(page_address(sg[i].page) + sg[i].offset, dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, dir); sg[i].length, dir);
#endif #endif
sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
...@@ -112,7 +112,7 @@ static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, ...@@ -112,7 +112,7 @@ static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
if (dev->bus == &pci_bus_type) if (dev->bus == &pci_bus_type)
return; return;
#endif #endif
dma_cache_sync(bus_to_virt(dma_handle), size, dir); dma_cache_sync(dev, bus_to_virt(dma_handle), size, dir);
} }
static inline void dma_sync_single_range(struct device *dev, static inline void dma_sync_single_range(struct device *dev,
...@@ -124,7 +124,7 @@ static inline void dma_sync_single_range(struct device *dev, ...@@ -124,7 +124,7 @@ static inline void dma_sync_single_range(struct device *dev,
if (dev->bus == &pci_bus_type) if (dev->bus == &pci_bus_type)
return; return;
#endif #endif
dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir); dma_cache_sync(dev, bus_to_virt(dma_handle) + offset, size, dir);
} }
static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
...@@ -134,7 +134,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, ...@@ -134,7 +134,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
for (i = 0; i < nelems; i++) { for (i = 0; i < nelems; i++) {
#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) #if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
dma_cache_sync(page_address(sg[i].page) + sg[i].offset, dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, dir); sg[i].length, dir);
#endif #endif
sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
......
...@@ -37,7 +37,8 @@ ...@@ -37,7 +37,8 @@
# define ONCHIP_NR_IRQS 144 # define ONCHIP_NR_IRQS 144
#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \ #elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
defined(CONFIG_CPU_SUBTYPE_SH73180) || \ defined(CONFIG_CPU_SUBTYPE_SH73180) || \
defined(CONFIG_CPU_SUBTYPE_SH7343) defined(CONFIG_CPU_SUBTYPE_SH7343) || \
defined(CONFIG_CPU_SUBTYPE_SH7722)
# define ONCHIP_NR_IRQS 109 # define ONCHIP_NR_IRQS 109
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define ONCHIP_NR_IRQS 111 # define ONCHIP_NR_IRQS 111
...@@ -79,6 +80,8 @@ ...@@ -79,6 +80,8 @@
# define OFFCHIP_NR_IRQS 16 # define OFFCHIP_NR_IRQS 16
#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE) #elif defined(CONFIG_SH_7343_SOLUTION_ENGINE)
# define OFFCHIP_NR_IRQS 12 # define OFFCHIP_NR_IRQS 12
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
# define OFFCHIP_NR_IRQS 14
#elif defined(CONFIG_SH_UNKNOWN) #elif defined(CONFIG_SH_UNKNOWN)
# define OFFCHIP_NR_IRQS 16 /* Must also be last */ # define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else #else
......
...@@ -508,14 +508,48 @@ struct vm_area_struct; ...@@ -508,14 +508,48 @@ struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct * vma, extern void update_mmu_cache(struct vm_area_struct * vma,
unsigned long address, pte_t pte); unsigned long address, pte_t pte);
/* Encode and de-code a swap entry */
/* /*
* Encode and de-code a swap entry
*
* Constraints:
* _PAGE_FILE at bit 0
* _PAGE_PRESENT at bit 8
* _PAGE_PROTNONE at bit 9
*
* For the normal case, we encode the swap type into bits 0:7 and the
* swap offset into bits 10:30. For the 64-bit PTE case, we keep the
* preserved bits in the low 32-bits and use the upper 32 as the swap
* offset (along with a 5-bit type), following the same approach as x86
* PAE. This keeps the logic quite simple, and allows for a full 32
* PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
* in the pte_low case.
*
* As is evident by the Alpha code, if we ever get a 64-bit unsigned
* long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
* much cleaner..
*
* NOTE: We should set ZEROs at the position of _PAGE_PRESENT * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
* and _PAGE_PROTNONE bits * and _PAGE_PROTNONE bits
*/ */
#ifdef CONFIG_X2TLB
#define __swp_type(x) ((x).val & 0x1f)
#define __swp_offset(x) ((x).val >> 5)
#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5})
#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val })
/*
* Encode and decode a nonlinear file mapping entry
*/
#define pte_to_pgoff(pte) ((pte).pte_high)
#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
#define PTE_FILE_MAX_BITS 32
#else
#define __swp_type(x) ((x).val & 0xff) #define __swp_type(x) ((x).val & 0xff)
#define __swp_offset(x) ((x).val >> 10) #define __swp_offset(x) ((x).val >> 10)
#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 10) }) #define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10})
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 })
...@@ -525,6 +559,7 @@ extern void update_mmu_cache(struct vm_area_struct * vma, ...@@ -525,6 +559,7 @@ extern void update_mmu_cache(struct vm_area_struct * vma,
#define PTE_FILE_MAX_BITS 29 #define PTE_FILE_MAX_BITS 29
#define pte_to_pgoff(pte) (pte_val(pte) >> 1) #define pte_to_pgoff(pte) (pte_val(pte) >> 1)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) #define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE })
#endif
typedef pte_t *pte_addr_t; typedef pte_t *pte_addr_t;
......
...@@ -27,6 +27,8 @@ ...@@ -27,6 +27,8 @@
#define CCN_CVR 0xff000040 #define CCN_CVR 0xff000040
#define CCN_PRR 0xff000044 #define CCN_PRR 0xff000044
const char *get_cpu_subtype(void);
/* /*
* CPU type and hardware bug flags. Kept separately for each CPU. * CPU type and hardware bug flags. Kept separately for each CPU.
* *
...@@ -52,8 +54,10 @@ enum cpu_type { ...@@ -52,8 +54,10 @@ enum cpu_type {
CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */ /* SH-4A types */
CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
CPU_SH7785,
/* SH4AL-DSP types */
CPU_SH73180, CPU_SH7343, CPU_SH7722,
/* Unknown subtype */ /* Unknown subtype */
CPU_SH_NONE CPU_SH_NONE
......
...@@ -4,6 +4,7 @@ ...@@ -4,6 +4,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/workqueue.h> #include <linux/workqueue.h>
#include <linux/platform_device.h>
struct push_switch { struct push_switch {
/* switch state */ /* switch state */
...@@ -12,6 +13,8 @@ struct push_switch { ...@@ -12,6 +13,8 @@ struct push_switch {
struct timer_list debounce; struct timer_list debounce;
/* workqueue */ /* workqueue */
struct work_struct work; struct work_struct work;
/* platform device, for workqueue handler */
struct platform_device *pdev;
}; };
struct push_switch_platform_info { struct push_switch_platform_info {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment