Skip to content

L
linux
Commit d23b0f08 authored by Michal Nazarewicz's avatar Michal Nazarewicz Committed by Greg Kroah-Hartman
Browse files
Options

USB: g_mass_storage: Mass Storage Function created 

The f_mass_storage.c has been changed into a composite function.
mass_storage.c file has been introduced which defines a
g_mass_storage gadget based on composite framework.
Signed-off-by: default avatarMichal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 6648f29d
Hide whitespace changes
Inline Side-by-side
Showing with 426 additions and 500 deletions
drivers/usb/gadget/Kconfig
View file @ d23b0f08
...@@ -732,6 +732,24 @@ config USB_FILE_STORAGE_TEST ...@@ -732,6 +732,24 @@ config USB_FILE_STORAGE_TEST
behavior of USB Mass Storage hosts. Not needed for behavior of USB Mass Storage hosts. Not needed for
normal operation. normal operation.
config USB_MASS_STORAGE
tristate "Mass Storage Gadget"
depends on BLOCK
help
The Mass Storage Gadget acts as a USB Mass Storage disk drive.
As its storage repository it can use a regular file or a block
device (in much the same way as the "loop" device driver),
specified as a module parameter or sysfs option.
This is heavily based on File-backed Storage Gadget and in most
cases you will want to use FSG instead. This gadget is mostly
here to test the functionality of the Mass Storage Function
which may be used with composite framework.
Say "y" to link the driver statically, or "m" to build
a dynamically linked module called "g_file_storage". If unsure,
consider File-backed Storage Gadget.
config USB_G_SERIAL config USB_G_SERIAL
tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
help help
......
drivers/usb/gadget/Makefile
View file @ d23b0f08
...@@ -39,6 +39,7 @@ g_serial-objs := serial.o ...@@ -39,6 +39,7 @@ g_serial-objs := serial.o
g_midi-objs := gmidi.o g_midi-objs := gmidi.o
gadgetfs-objs := inode.o gadgetfs-objs := inode.o
g_file_storage-objs := file_storage.o g_file_storage-objs := file_storage.o
g_mass_storage-objs := mass_storage.o
g_printer-objs := printer.o g_printer-objs := printer.o
g_cdc-objs := cdc2.o g_cdc-objs := cdc2.o
...@@ -47,6 +48,7 @@ obj-$(CONFIG_USB_AUDIO) += g_audio.o ...@@ -47,6 +48,7 @@ obj-$(CONFIG_USB_AUDIO) += g_audio.o
obj-$(CONFIG_USB_ETH) += g_ether.o obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
obj-$(CONFIG_USB_G_PRINTER) += g_printer.o obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
......
drivers/usb/gadget/f_mass_storage.c
View file @ d23b0f08
...@@ -233,47 +233,23 @@ ...@@ -233,47 +233,23 @@
/*
* Kbuild is not very cooperative with respect to linking separately
* compiled library objects into one module. So for now we won't use
* separate compilation ... ensuring init/exit sections work to shrink
* the runtime footprint, and giving us at least some parts of what
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
*/
#include "usbstring.c"
#include "config.c"
#include "epautoconf.c"
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
#define DRIVER_DESC "File-backed Storage Gadget" #define FSG_DRIVER_DESC "Mass Storage Function"
#define DRIVER_NAME "g_file_storage" #define FSG_DRIVER_VERSION "20 November 2008"
#define DRIVER_VERSION "20 November 2008"
static char fsg_string_manufacturer[64];
static const char fsg_string_product[] = DRIVER_DESC;
static char fsg_string_serial[13];
static const char fsg_string_config[] = "Self-powered";
static const char fsg_string_interface[] = "Mass Storage"; static const char fsg_string_interface[] = "Mass Storage";
#define FSG_NO_INTR_EP 1 #define FSG_NO_INTR_EP 1
#define FSG_BUFFHD_STATIC_BUFFER 1 #define FSG_BUFFHD_STATIC_BUFFER 1
#define FSG_NO_DEVICE_STRINGS 1
#define FSG_NO_OTG 1
#define FSG_NO_INTR_EP 1
#include "storage_common.c" #include "storage_common.c"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Alan Stern");
MODULE_LICENSE("Dual BSD/GPL");
/*
* This driver assumes self-powered hardware and has no way for users to
* trigger remote wakeup. It uses autoconfiguration to select endpoints
* and endpoint addresses.
*/
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
...@@ -295,6 +271,7 @@ static struct { ...@@ -295,6 +271,7 @@ static struct {
.removable = 0, .removable = 0,
.can_stall = 1, .can_stall = 1,
.cdrom = 0, .cdrom = 0,
.release = 0xffff,
}; };
...@@ -347,14 +324,18 @@ struct fsg_common { ...@@ -347,14 +324,18 @@ struct fsg_common {
struct fsg_dev { struct fsg_dev {
struct usb_function function;
struct usb_composite_dev*cdev;
struct usb_gadget *gadget; /* Copy of cdev->gadget */
struct fsg_common *common; struct fsg_common *common;
u16 interface_number;
/* lock protects: state, all the req_busy's */ /* lock protects: state, all the req_busy's */
spinlock_t lock; spinlock_t lock;
struct usb_gadget *gadget;
struct usb_ep *ep0; // Handy copy of gadget->ep0 struct usb_ep *ep0; /* Copy of gadget->ep0 */
struct usb_request *ep0req; // For control responses struct usb_request *ep0req; /* Copy of cdev->req */
unsigned int ep0_req_tag; unsigned int ep0_req_tag;
const char *ep0req_name; const char *ep0req_name;
...@@ -390,6 +371,13 @@ struct fsg_dev { ...@@ -390,6 +371,13 @@ struct fsg_dev {
u32 usb_amount_left; u32 usb_amount_left;
}; };
static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
{
return container_of(f, struct fsg_dev, function);
}
typedef void (*fsg_routine_t)(struct fsg_dev *); typedef void (*fsg_routine_t)(struct fsg_dev *);
static int exception_in_progress(struct fsg_dev *fsg) static int exception_in_progress(struct fsg_dev *fsg)
...@@ -410,10 +398,6 @@ static void set_bulk_out_req_length(struct fsg_dev *fsg, ...@@ -410,10 +398,6 @@ static void set_bulk_out_req_length(struct fsg_dev *fsg,
bh->outreq->length = length; bh->outreq->length = length;
} }
static struct fsg_dev *the_fsg;
static struct usb_gadget_driver fsg_driver;
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
...@@ -431,95 +415,6 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) ...@@ -431,95 +415,6 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
} }
/*-------------------------------------------------------------------------*/
/*
* DESCRIPTORS ... most are static, but strings and (full) configuration
* descriptors are built on demand. Also the (static) config and interface
* descriptors are adjusted during fsg_bind().
*/
/* There is only one configuration. */
#define CONFIG_VALUE 1
static struct usb_device_descriptor
device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_PER_INTERFACE,
/* The next three values can be overridden by module parameters */
.idVendor = cpu_to_le16(FSG_VENDOR_ID),
.idProduct = cpu_to_le16(FSG_PRODUCT_ID),
.bcdDevice = cpu_to_le16(0xffff),
.iManufacturer = FSG_STRING_MANUFACTURER,
.iProduct = FSG_STRING_PRODUCT,
.iSerialNumber = FSG_STRING_SERIAL,
.bNumConfigurations = 1,
};
static struct usb_config_descriptor
config_desc = {
.bLength = sizeof config_desc,
.bDescriptorType = USB_DT_CONFIG,
/* wTotalLength computed by usb_gadget_config_buf() */
.bNumInterfaces = 1,
.bConfigurationValue = CONFIG_VALUE,
.iConfiguration = FSG_STRING_CONFIG,
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
.bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
};
static struct usb_qualifier_descriptor
dev_qualifier = {
.bLength = sizeof dev_qualifier,
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
.bcdUSB = cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_PER_INTERFACE,
.bNumConfigurations = 1,
};
/*
* Config descriptors must agree with the code that sets configurations
* and with code managing interfaces and their altsettings. They must
* also handle different speeds and other-speed requests.
*/
static int populate_config_buf(struct usb_gadget *gadget,
u8 *buf, u8 type, unsigned index)
{
enum usb_device_speed speed = gadget->speed;
int len;
const struct usb_descriptor_header **function;
if (index > 0)
return -EINVAL;
if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH)
function = fsg_hs_function;
else
function = fsg_fs_function;
/* for now, don't advertise srp-only devices */
if (!gadget_is_otg(gadget))
function++;
len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
((struct usb_config_descriptor *) buf)->bDescriptorType = type;
return len;
}
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
/* These routines may be called in process context or in_irq */ /* These routines may be called in process context or in_irq */
...@@ -555,25 +450,12 @@ static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) ...@@ -555,25 +450,12 @@ static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
/* The disconnect callback and ep0 routines. These always run in_irq,
* except that ep0_queue() is called in the main thread to acknowledge
* completion of various requests: set config, set interface, and
* Bulk-only device reset. */
static void fsg_disconnect(struct usb_gadget *gadget)
{
struct fsg_dev *fsg = get_gadget_data(gadget);
DBG(fsg, "disconnect or port reset\n");
raise_exception(fsg, FSG_STATE_DISCONNECT);
}
static int ep0_queue(struct fsg_dev *fsg) static int ep0_queue(struct fsg_dev *fsg)
{ {
int rc; int rc;
rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
fsg->ep0->driver_data = fsg;
if (rc != 0 && rc != -ESHUTDOWN) { if (rc != 0 && rc != -ESHUTDOWN) {
/* We can't do much more than wait for a reset */ /* We can't do much more than wait for a reset */
...@@ -583,23 +465,6 @@ static int ep0_queue(struct fsg_dev *fsg) ...@@ -583,23 +465,6 @@ static int ep0_queue(struct fsg_dev *fsg)
return rc; return rc;
} }
static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
{
struct fsg_dev *fsg = ep->driver_data;
if (req->actual > 0)
dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
if (req->status || req->actual != req->length)
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual, req->length);
if (req->status == -ECONNRESET) // Request was cancelled
usb_ep_fifo_flush(ep);
if (req->status == 0 && req->context)
((fsg_routine_t) (req->context))(fsg);
}
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
/* Bulk and interrupt endpoint completion handlers. /* Bulk and interrupt endpoint completion handlers.
...@@ -652,9 +517,10 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) ...@@ -652,9 +517,10 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
/* Ep0 class-specific handlers. These always run in_irq. */ /* Ep0 class-specific handlers. These always run in_irq. */
static int class_setup_req(struct fsg_dev *fsg, static int fsg_setup(struct usb_function *f,
const struct usb_ctrlrequest *ctrl) const struct usb_ctrlrequest *ctrl)
{ {
struct fsg_dev *fsg = fsg_from_func(f);
struct usb_request *req = fsg->ep0req; struct usb_request *req = fsg->ep0req;
u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_index = le16_to_cpu(ctrl->wIndex);
u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_value = le16_to_cpu(ctrl->wValue);
...@@ -669,7 +535,7 @@ static int class_setup_req(struct fsg_dev *fsg, ...@@ -669,7 +535,7 @@ static int class_setup_req(struct fsg_dev *fsg,
if (ctrl->bRequestType != if (ctrl->bRequestType !=
(USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
break; break;
if (w_index != 0 || w_value != 0) if (w_index != fsg->interface_number || w_value != 0)
return -EDOM; return -EDOM;
/* Raise an exception to stop the current operation /* Raise an exception to stop the current operation
...@@ -682,7 +548,7 @@ static int class_setup_req(struct fsg_dev *fsg, ...@@ -682,7 +548,7 @@ static int class_setup_req(struct fsg_dev *fsg,
if (ctrl->bRequestType != if (ctrl->bRequestType !=
(USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
break; break;
if (w_index != 0 || w_value != 0) if (w_index != fsg->interface_number || w_value != 0)
return -EDOM; return -EDOM;
VDBG(fsg, "get max LUN\n"); VDBG(fsg, "get max LUN\n");
*(u8 *) req->buf = fsg->common->nluns - 1; *(u8 *) req->buf = fsg->common->nluns - 1;
...@@ -698,160 +564,6 @@ static int class_setup_req(struct fsg_dev *fsg, ...@@ -698,160 +564,6 @@ static int class_setup_req(struct fsg_dev *fsg,
} }
/*-------------------------------------------------------------------------*/
/* Ep0 standard request handlers. These always run in_irq. */
static int standard_setup_req(struct fsg_dev *fsg,
const struct usb_ctrlrequest *ctrl)
{
struct usb_request *req = fsg->ep0req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
u16 w_value = le16_to_cpu(ctrl->wValue);
/* Usually this just stores reply data in the pre-allocated ep0 buffer,
* but config change events will also reconfigure hardware. */
switch (ctrl->bRequest) {
case USB_REQ_GET_DESCRIPTOR:
if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
USB_RECIP_DEVICE))
break;
switch (w_value >> 8) {
case USB_DT_DEVICE:
VDBG(fsg, "get device descriptor\n");
value = sizeof device_desc;
memcpy(req->buf, &device_desc, value);
break;
case USB_DT_DEVICE_QUALIFIER:
VDBG(fsg, "get device qualifier\n");
if (!gadget_is_dualspeed(fsg->gadget))
break;
value = sizeof dev_qualifier;
memcpy(req->buf, &dev_qualifier, value);
break;
case USB_DT_OTHER_SPEED_CONFIG:
VDBG(fsg, "get other-speed config descriptor\n");
if (!gadget_is_dualspeed(fsg->gadget))
break;
goto get_config;
case USB_DT_CONFIG:
VDBG(fsg, "get configuration descriptor\n");
get_config:
value = populate_config_buf(fsg->gadget,
req->buf,
w_value >> 8,
w_value & 0xff);
break;
case USB_DT_STRING:
VDBG(fsg, "get string descriptor\n");
/* wIndex == language code */
value = usb_gadget_get_string(&fsg_stringtab,
w_value & 0xff, req->buf);
break;
}
break;
/* One config, two speeds */
case USB_REQ_SET_CONFIGURATION:
if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
USB_RECIP_DEVICE))
break;
VDBG(fsg, "set configuration\n");
if (w_value == CONFIG_VALUE || w_value == 0) {
fsg->new_config = w_value;
/* Raise an exception to wipe out previous transaction
* state (queued bufs, etc) and set the new config. */
raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
value = DELAYED_STATUS;
}
break;
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
USB_RECIP_DEVICE))
break;
VDBG(fsg, "get configuration\n");
*(u8 *) req->buf = fsg->config;
value = 1;
break;
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
USB_RECIP_INTERFACE))
break;
if (fsg->config && w_index == 0) {
/* Raise an exception to wipe out previous transaction
* state (queued bufs, etc) and install the new
* interface altsetting. */
raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
value = DELAYED_STATUS;
}
break;
case USB_REQ_GET_INTERFACE:
if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
USB_RECIP_INTERFACE))
break;
if (!fsg->config)
break;
if (w_index != 0) {
value = -EDOM;
break;
}
VDBG(fsg, "get interface\n");
*(u8 *) req->buf = 0;
value = 1;
break;
default:
VDBG(fsg,
"unknown control req %02x.%02x v%04x i%04x l%u\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, le16_to_cpu(ctrl->wLength));
}
return value;
}
static int fsg_setup(struct usb_gadget *gadget,
const struct usb_ctrlrequest *ctrl)
{
struct fsg_dev *fsg = get_gadget_data(gadget);
int rc;
int w_length = le16_to_cpu(ctrl->wLength);
++fsg->ep0_req_tag; // Record arrival of a new request
fsg->ep0req->context = NULL;
fsg->ep0req->length = 0;
dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
rc = class_setup_req(fsg, ctrl);
else
rc = standard_setup_req(fsg, ctrl);
/* Respond with data/status or defer until later? */
if (rc >= 0 && rc != DELAYED_STATUS) {
rc = min(rc, w_length);
fsg->ep0req->length = rc;
fsg->ep0req->zero = rc < w_length;
fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
"ep0-in" : "ep0-out");
rc = ep0_queue(fsg);
}
/* Device either stalls (rc < 0) or reports success */
return rc;
}
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
/* All the following routines run in process context */ /* All the following routines run in process context */
...@@ -2518,24 +2230,33 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config) ...@@ -2518,24 +2230,33 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config)
/* Enable the interface */ /* Enable the interface */
if (new_config != 0) { if (new_config != 0) {
fsg->config = new_config; fsg->config = new_config;
if ((rc = do_set_interface(fsg, 0)) != 0) rc = do_set_interface(fsg, 0);
fsg->config = 0; // Reset on errors if (rc != 0)
else { fsg->config = 0; /* Reset on errors */
char *speed;
switch (fsg->gadget->speed) {
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
default: speed = "?"; break;
}
INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
}
} }
return rc; return rc;
} }
/****************************** ALT CONFIGS ******************************/
static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct fsg_dev *fsg = fsg_from_func(f);
fsg->new_config = 1;
raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
return 0;
}
static void fsg_disable(struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
fsg->new_config = 0;
raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
}
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
static void handle_exception(struct fsg_dev *fsg) static void handle_exception(struct fsg_dev *fsg)
...@@ -2623,9 +2344,6 @@ static void handle_exception(struct fsg_dev *fsg) ...@@ -2623,9 +2344,6 @@ static void handle_exception(struct fsg_dev *fsg)
/* Carry out any extra actions required for the exception */ /* Carry out any extra actions required for the exception */
switch (old_state) { switch (old_state) {
default:
break;
case FSG_STATE_ABORT_BULK_OUT: case FSG_STATE_ABORT_BULK_OUT:
send_status(fsg); send_status(fsg);
spin_lock_irq(&fsg->lock); spin_lock_irq(&fsg->lock);
...@@ -2651,16 +2369,6 @@ static void handle_exception(struct fsg_dev *fsg) ...@@ -2651,16 +2369,6 @@ static void handle_exception(struct fsg_dev *fsg)
// fsg->common->luns[i].unit_attention_data = SS_RESET_OCCURRED; // fsg->common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
break; break;
case FSG_STATE_INTERFACE_CHANGE:
rc = do_set_interface(fsg, 0);
if (fsg->ep0_req_tag != exception_req_tag)
break;
if (rc != 0) // STALL on errors
fsg_set_halt(fsg, fsg->ep0);
else // Complete the status stage
ep0_queue(fsg);
break;
case FSG_STATE_CONFIG_CHANGE: case FSG_STATE_CONFIG_CHANGE:
rc = do_set_config(fsg, new_config); rc = do_set_config(fsg, new_config);
if (fsg->ep0_req_tag != exception_req_tag) if (fsg->ep0_req_tag != exception_req_tag)
...@@ -2671,12 +2379,6 @@ static void handle_exception(struct fsg_dev *fsg) ...@@ -2671,12 +2379,6 @@ static void handle_exception(struct fsg_dev *fsg)
ep0_queue(fsg); ep0_queue(fsg);
break; break;
case FSG_STATE_DISCONNECT:
for (i = 0; i < fsg->common->nluns; ++i)
fsg_lun_fsync_sub(&fsg->common->luns[i]);
do_set_config(fsg, 0); // Unconfigured state
break;
case FSG_STATE_EXIT: case FSG_STATE_EXIT:
case FSG_STATE_TERMINATED: case FSG_STATE_TERMINATED:
do_set_config(fsg, 0); // Free resources do_set_config(fsg, 0); // Free resources
...@@ -2684,6 +2386,14 @@ static void handle_exception(struct fsg_dev *fsg) ...@@ -2684,6 +2386,14 @@ static void handle_exception(struct fsg_dev *fsg)
fsg->state = FSG_STATE_TERMINATED; // Stop the thread fsg->state = FSG_STATE_TERMINATED; // Stop the thread
spin_unlock_irq(&fsg->lock); spin_unlock_irq(&fsg->lock);
break; break;
case FSG_STATE_INTERFACE_CHANGE:
case FSG_STATE_DISCONNECT:
case FSG_STATE_COMMAND_PHASE:
case FSG_STATE_DATA_PHASE:
case FSG_STATE_STATUS_PHASE:
case FSG_STATE_IDLE:
break;
} }
} }
...@@ -2744,16 +2454,17 @@ static int fsg_main_thread(void *fsg_) ...@@ -2744,16 +2454,17 @@ static int fsg_main_thread(void *fsg_)
if (!exception_in_progress(fsg)) if (!exception_in_progress(fsg))
fsg->state = FSG_STATE_IDLE; fsg->state = FSG_STATE_IDLE;
spin_unlock_irq(&fsg->lock); spin_unlock_irq(&fsg->lock);
} }
spin_lock_irq(&fsg->lock); spin_lock_irq(&fsg->lock);
fsg->thread_task = NULL; fsg->thread_task = NULL;
spin_unlock_irq(&fsg->lock); spin_unlock_irq(&fsg->lock);
/* XXX */
/* If we are exiting because of a signal, unregister the /* If we are exiting because of a signal, unregister the
* gadget driver. */ * gadget driver. */
if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) /* if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) */
usb_gadget_unregister_driver(&fsg_driver); /* usb_gadget_unregister_driver(&fsg_driver); */
/* Let the unbind and cleanup routines know the thread has exited */ /* Let the unbind and cleanup routines know the thread has exited */
complete_and_exit(&fsg->thread_notifier, 0); complete_and_exit(&fsg->thread_notifier, 0);
...@@ -2762,10 +2473,9 @@ static int fsg_main_thread(void *fsg_) ...@@ -2762,10 +2473,9 @@ static int fsg_main_thread(void *fsg_)
/*************************** DEVICE ATTRIBUTES ***************************/ /*************************** DEVICE ATTRIBUTES ***************************/
/* Write permission is checked per LUN in store_*() functions. */
/* The write permissions and store_xxx pointers are set in fsg_bind() */ static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro);
static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file);
static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
/****************************** FSG COMMON ******************************/ /****************************** FSG COMMON ******************************/
...@@ -2789,11 +2499,13 @@ static inline void fsg_common_put(struct fsg_common *common) ...@@ -2789,11 +2499,13 @@ static inline void fsg_common_put(struct fsg_common *common)
static struct fsg_common *fsg_common_init(struct fsg_common *common, static struct fsg_common *fsg_common_init(struct fsg_common *common,
struct usb_gadget *gadget) struct usb_composite_dev *cdev)
{ {
struct usb_gadget *gadget = cdev->gadget;
struct fsg_buffhd *bh; struct fsg_buffhd *bh;
struct fsg_lun *curlun; struct fsg_lun *curlun;
int nluns, i, rc; int nluns, i, rc;
char *pathbuf;
/* Find out how many LUNs there should be */ /* Find out how many LUNs there should be */
nluns = mod_data.nluns; nluns = mod_data.nluns;
...@@ -2833,7 +2545,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, ...@@ -2833,7 +2545,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
curlun->removable = mod_data.removable; curlun->removable = mod_data.removable;
curlun->dev.release = fsg_lun_release; curlun->dev.release = fsg_lun_release;
curlun->dev.parent = &gadget->dev; curlun->dev.parent = &gadget->dev;
curlun->dev.driver = &fsg_driver.driver; /* curlun->dev.driver = &fsg_driver.driver; XXX */
dev_set_drvdata(&curlun->dev, &common->filesem); dev_set_drvdata(&curlun->dev, &common->filesem);
dev_set_name(&curlun->dev,"%s-lun%d", dev_set_name(&curlun->dev,"%s-lun%d",
dev_name(&gadget->dev), i); dev_name(&gadget->dev), i);
...@@ -2906,6 +2618,33 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, ...@@ -2906,6 +2618,33 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
kref_init(&common->ref); kref_init(&common->ref);
/* Information */
INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
INFO(common, "Number of LUNs=%d\n", common->nluns);
pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
for (i = 0, nluns = common->nluns, curlun = common->luns;
i < nluns;
++curlun, ++i) {
char *p = "(no medium)";
if (fsg_lun_is_open(curlun)) {
p = "(error)";
if (pathbuf) {
p = d_path(&curlun->filp->f_path,
pathbuf, PATH_MAX);
if (IS_ERR(p))
p = "(error)";
}
}
LINFO(curlun, "LUN: %s%s%sfile: %s\n",
curlun->removable ? "removable " : "",
curlun->ro ? "read only " : "",
curlun->cdrom ? "CD-ROM " : "",
p);
}
kfree(pathbuf);
return common; return common;
...@@ -2944,10 +2683,9 @@ static void fsg_common_release(struct kref *ref) ...@@ -2944,10 +2683,9 @@ static void fsg_common_release(struct kref *ref)
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
{ {
struct fsg_dev *fsg = get_gadget_data(gadget); struct fsg_dev *fsg = fsg_from_func(f);
struct usb_request *req = fsg->ep0req;
DBG(fsg, "unbind\n"); DBG(fsg, "unbind\n");
clear_bit(REGISTERED, &fsg->atomic_bitflags); clear_bit(REGISTERED, &fsg->atomic_bitflags);
...@@ -2961,59 +2699,31 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) ...@@ -2961,59 +2699,31 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
complete(&fsg->thread_notifier); complete(&fsg->thread_notifier);
} }
/* Free the request and buffer for endpoint 0 */
if (req) {
kfree(req->buf);
usb_ep_free_request(fsg->ep0, req);
}
fsg_common_put(fsg->common); fsg_common_put(fsg->common);
kfree(fsg); kfree(fsg);
set_gadget_data(gadget, NULL);
} }
static int __init fsg_bind(struct usb_gadget *gadget) static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
{ {
struct fsg_dev *fsg; struct fsg_dev *fsg = fsg_from_func(f);
struct usb_gadget *gadget = c->cdev->gadget;
int rc; int rc;
int i; int i;
struct fsg_lun *curlun;
struct usb_ep *ep; struct usb_ep *ep;
struct usb_request *req;
char *pathbuf, *p;
/* Allocate */
fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
if (!fsg)
return -ENOMEM;
/* Initialise common */
fsg->common = fsg_common_init(0, gadget);
if (IS_ERR(fsg->common))
return PTR_ERR(fsg->common);
/* Basic parameters */
fsg->gadget = gadget; fsg->gadget = gadget;
set_gadget_data(gadget, fsg);
fsg->ep0 = gadget->ep0; fsg->ep0 = gadget->ep0;
fsg->ep0->driver_data = fsg; fsg->ep0req = c->cdev->req;
spin_lock_init(&fsg->lock); /* New interface */
init_completion(&fsg->thread_notifier); i = usb_interface_id(c, f);
if (i < 0)
/* Enable the store_xxx attributes */ return i;
if (mod_data.removable) { fsg_intf_desc.bInterfaceNumber = i;
dev_attr_file.attr.mode = 0644; fsg->interface_number = i;
dev_attr_file.store = fsg_store_file;
if (!mod_data.cdrom) {
dev_attr_ro.attr.mode = 0644;
dev_attr_ro.store = fsg_store_ro;
}
}
/* Find all the endpoints we will use */ /* Find all the endpoints we will use */
usb_ep_autoconfig_reset(gadget);
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
if (!ep) if (!ep)
goto autoconf_fail; goto autoconf_fail;
...@@ -3026,53 +2736,26 @@ static int __init fsg_bind(struct usb_gadget *gadget) ...@@ -3026,53 +2736,26 @@ static int __init fsg_bind(struct usb_gadget *gadget)
ep->driver_data = fsg; // claim the endpoint ep->driver_data = fsg; // claim the endpoint
fsg->bulk_out = ep; fsg->bulk_out = ep;
/* Fix up the descriptors */
device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
device_desc.bcdDevice = cpu_to_le16(mod_data.release);
if (gadget_is_dualspeed(gadget)) { if (gadget_is_dualspeed(gadget)) {
/* Assume ep0 uses the same maxpacket value for both speeds */
dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
/* Assume endpoint addresses are the same for both speeds */ /* Assume endpoint addresses are the same for both speeds */
fsg_hs_bulk_in_desc.bEndpointAddress = fsg_hs_bulk_in_desc.bEndpointAddress =
fsg_fs_bulk_in_desc.bEndpointAddress; fsg_fs_bulk_in_desc.bEndpointAddress;
fsg_hs_bulk_out_desc.bEndpointAddress = fsg_hs_bulk_out_desc.bEndpointAddress =
fsg_fs_bulk_out_desc.bEndpointAddress; fsg_fs_bulk_out_desc.bEndpointAddress;
f->hs_descriptors = fsg_hs_function;
} }
if (gadget_is_otg(gadget))
fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
rc = -ENOMEM;
/* Allocate the request and buffer for endpoint 0 */
fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
if (!req)
goto out;
req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
if (!req->buf)
goto out;
req->complete = ep0_complete;
/* This should reflect the actual gadget power source */
usb_gadget_set_selfpowered(gadget);
snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
"%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
/* On a real device, serial[] would be loaded from permanent
* storage. We just encode it from the driver version string. */
for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) {
unsigned char c = DRIVER_VERSION[i / 2];
if (!c) /* maybe allocate device-global string IDs, and patch descriptors */
break; if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
sprintf(&fsg_string_serial[i], "%02X", c); i = usb_string_id(c->cdev);
if (i < 0)
return i;
fsg_strings[FSG_STRING_INTERFACE].id = i;
fsg_intf_desc.iInterface = i;
} }
fsg->thread_task = kthread_create(fsg_main_thread, fsg, fsg->thread_task = kthread_create(fsg_main_thread, fsg,
"file-storage-gadget"); "file-storage-gadget");
if (IS_ERR(fsg->thread_task)) { if (IS_ERR(fsg->thread_task)) {
...@@ -3080,37 +2763,12 @@ static int __init fsg_bind(struct usb_gadget *gadget) ...@@ -3080,37 +2763,12 @@ static int __init fsg_bind(struct usb_gadget *gadget)
goto out; goto out;
} }
INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
INFO(fsg, "Number of LUNs=%d\n", fsg->common->nluns);
pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
for (i = 0; i < fsg->common->nluns; ++i) {
curlun = &fsg->common->luns[i];
if (fsg_lun_is_open(curlun)) {
p = NULL;
if (pathbuf) {
p = d_path(&curlun->filp->f_path,
pathbuf, PATH_MAX);
if (IS_ERR(p))
p = NULL;
}
LINFO(curlun, "ro=%d, file: %s\n",
curlun->ro, (p ? p : "(error)"));
}
}
kfree(pathbuf);
DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
mod_data.removable, mod_data.can_stall,
mod_data.cdrom, FSG_BUFLEN);
DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
set_bit(REGISTERED, &fsg->atomic_bitflags); set_bit(REGISTERED, &fsg->atomic_bitflags);
/* Tell the thread to start working */ /* Tell the thread to start working */
wake_up_process(fsg->thread_task); wake_up_process(fsg->thread_task);
the_fsg = fsg;
return 0; return 0;
autoconf_fail: autoconf_fail:
...@@ -3119,48 +2777,56 @@ static int __init fsg_bind(struct usb_gadget *gadget) ...@@ -3119,48 +2777,56 @@ static int __init fsg_bind(struct usb_gadget *gadget)
out: out:
fsg->state = FSG_STATE_TERMINATED; // The thread is dead fsg->state = FSG_STATE_TERMINATED; // The thread is dead
fsg_unbind(gadget); fsg_unbind(c, f);
complete(&fsg->thread_notifier); complete(&fsg->thread_notifier);
return rc; return rc;
} }
/*-------------------------------------------------------------------------*/ /****************************** ADD FUNCTION ******************************/
static struct usb_gadget_driver fsg_driver = { static struct usb_gadget_strings *fsg_strings_array[] = {
#ifdef CONFIG_USB_GADGET_DUALSPEED &fsg_stringtab,
.speed = USB_SPEED_HIGH, NULL,
#else
.speed = USB_SPEED_FULL,
#endif
.function = (char *) fsg_string_product,
.bind = fsg_bind,
.unbind = fsg_unbind,
.disconnect = fsg_disconnect,
.setup = fsg_setup,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
// .release = ...
// .suspend = ...
// .resume = ...
},
}; };
static int fsg_add(struct usb_composite_dev *cdev,
static int __init fsg_init(void) struct usb_configuration *c,
struct fsg_common *common)
{ {
return usb_gadget_register_driver(&fsg_driver); struct fsg_dev *fsg;
} int rc;
module_init(fsg_init);
fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
if (unlikely(!fsg))
return -ENOMEM;
spin_lock_init(&fsg->lock);
init_completion(&fsg->thread_notifier);
static void __exit fsg_cleanup(void) fsg->cdev = cdev;
{ fsg->function.name = FSG_DRIVER_DESC;
/* Unregister the driver iff the thread hasn't already done so */ fsg->function.strings = fsg_strings_array;
if (the_fsg && fsg->function.descriptors = fsg_fs_function;
test_and_clear_bit(REGISTERED, &the_fsg->atomic_bitflags)) fsg->function.bind = fsg_bind;
usb_gadget_unregister_driver(&fsg_driver); fsg->function.unbind = fsg_unbind;
fsg->function.setup = fsg_setup;
fsg->function.set_alt = fsg_set_alt;
fsg->function.disable = fsg_disable;
fsg->common = common;
/* Our caller holds a reference to common structure so we
* don't have to be worry about it being freed until we return
* from this function. So instead of incrementing counter now
* and decrement in error recovery we increment it only when
* call to usb_add_function() was successful. */
rc = usb_add_function(c, &fsg->function);
if (likely(rc == 0))
fsg_common_get(fsg->common);
else
kfree(fsg);
return rc;
} }
module_exit(fsg_cleanup);
drivers/usb/gadget/file_storage.c
View file @ d23b0f08
...@@ -594,10 +594,9 @@ static int populate_config_buf(struct usb_gadget *gadget, ...@@ -594,10 +594,9 @@ static int populate_config_buf(struct usb_gadget *gadget,
if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH) function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
function = fsg_hs_function; ? (const struct usb_descriptor_header **)fsg_hs_function
else : (const struct usb_descriptor_header **)fsg_fs_function;
function = fsg_fs_function;
/* for now, don't advertise srp-only devices */ /* for now, don't advertise srp-only devices */
if (!gadget_is_otg(gadget)) if (!gadget_is_otg(gadget))
......
drivers/usb/gadget/mass_storage.c 0 → 100644
View file @ d23b0f08
/*
* mass_storage.c -- File-backed USB Storage Gadget, for USB development
*
* Copyright (C) 2003-2008 Alan Stern
*
* Copyright (C) 2009 Samsung Electronics
* Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* The Mass Storage Gadget acts as a USB Mass Storage device,
* appearing to the host as a disk drive or as a CD-ROM drive. In
* addition to providing an example of a genuinely useful gadget
* driver for a USB device, it also illustrates a technique of
* double-buffering for increased throughput. Last but not least, it
* gives an easy way to probe the behavior of the Mass Storage drivers
* in a USB host.
*
* Since this file serves only administrative purposes and all the
* business logic is implemented in f_mass_storage.* file. Read
* comments in this file for more detailed description.
*/
#include <linux/kernel.h>
#include <linux/utsname.h>
#include <linux/usb/ch9.h>
/*-------------------------------------------------------------------------*/
#define DRIVER_DESC "Mass Storage Gadget"
#define DRIVER_VERSION "2009/07/21"
/*-------------------------------------------------------------------------*/
/*
* kbuild is not very cooperative with respect to linking separately
* compiled library objects into one module. So for now we won't use
* separate compilation ... ensuring init/exit sections work to shrink
* the runtime footprint, and giving us at least some parts of what
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
*/
#include "composite.c"
#include "usbstring.c"
#include "config.c"
#include "epautoconf.c"
#include "f_mass_storage.c"
/*-------------------------------------------------------------------------*/
static struct usb_device_descriptor msg_device_desc = {
.bLength = sizeof msg_device_desc,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_PER_INTERFACE,
/* Vendor and product id can be overridden by module parameters. */
.idVendor = cpu_to_le16(FSG_VENDOR_ID),
.idProduct = cpu_to_le16(FSG_PRODUCT_ID),
/* .bcdDevice = f(hardware) */
/* .iManufacturer = DYNAMIC */
/* .iProduct = DYNAMIC */
/* NO SERIAL NUMBER */
.bNumConfigurations = 1,
};
static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
/* REVISIT SRP-only hardware is possible, although
* it would not be called "OTG" ...
*/
.bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
static const struct usb_descriptor_header *otg_desc[] = {
(struct usb_descriptor_header *) &otg_descriptor,
NULL,
};
/* string IDs are assigned dynamically */
#define STRING_MANUFACTURER_IDX 0
#define STRING_PRODUCT_IDX 1
#define STRING_CONFIGURATION_IDX 2
static char manufacturer[50];
static struct usb_string strings_dev[] = {
[STRING_MANUFACTURER_IDX].s = manufacturer,
[STRING_PRODUCT_IDX].s = DRIVER_DESC,
[STRING_CONFIGURATION_IDX].s = "Self Powered",
{ } /* end of list */
};
static struct usb_gadget_strings stringtab_dev = {
.language = 0x0409, /* en-us */
.strings = strings_dev,
};
static struct usb_gadget_strings *dev_strings[] = {
&stringtab_dev,
NULL,
};
/****************************** Configurations ******************************/
static int __init msg_do_config(struct usb_configuration *c)
{
struct fsg_common *common;
int ret;
if (gadget_is_otg(c->cdev->gadget)) {
c->descriptors = otg_desc;
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
common = fsg_common_init(0, c->cdev);
if (IS_ERR(common))
return PTR_ERR(common);
ret = fsg_add(c->cdev, c, common);
fsg_common_put(common);
return ret;
}
static struct usb_configuration msg_config_driver = {
.label = "Linux File-Backed Storage",
.bind = msg_do_config,
.bConfigurationValue = 1,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
/****************************** Gadget Bind ******************************/
static int __init msg_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status;
/* Allocate string descriptor numbers ... note that string
* contents can be overridden by the composite_dev glue.
*/
/* device descriptor strings: manufacturer, product */
snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
status = usb_string_id(cdev);
if (status < 0)
return status;
strings_dev[STRING_MANUFACTURER_IDX].id = status;
msg_device_desc.iManufacturer = status;
status = usb_string_id(cdev);
if (status < 0)
return status;
strings_dev[STRING_PRODUCT_IDX].id = status;
msg_device_desc.iProduct = status;
status = usb_string_id(cdev);
if (status < 0)
return status;
strings_dev[STRING_CONFIGURATION_IDX].id = status;
msg_config_driver.iConfiguration = status;
/* register our second configuration */
status = usb_add_config(cdev, &msg_config_driver);
if (status < 0)
return status;
dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
return 0;
}
static int __exit msg_unbind(struct usb_composite_dev *cdev)
{
return 0;
}
/****************************** Some noise ******************************/
static struct usb_composite_driver msg_driver = {
.name = "g_mass_storage",
.dev = &msg_device_desc,
.strings = dev_strings,
.bind = msg_bind,
.unbind = __exit_p(msg_unbind),
};
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Michal Nazarewicz");
MODULE_LICENSE("GPL");
static int __init msg_init(void)
{
return usb_composite_register(&msg_driver);
}
module_init(msg_init);
static void __exit msg_cleanup(void)
{
usb_composite_unregister(&msg_driver);
}
module_exit(msg_cleanup);
drivers/usb/gadget/storage_common.c
View file @ d23b0f08
...@@ -84,11 +84,19 @@ ...@@ -84,11 +84,19 @@
#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args)
#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args)
#define DBG(d, fmt, args...) dev_dbg (&(d)->gadget->dev, fmt, ## args) /* Keep those macros in sync with thos in
#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev, fmt, ## args) * include/linux/ubs/composite.h or else GCC will complain. If they
#define ERROR(d, fmt, args...) dev_err (&(d)->gadget->dev, fmt, ## args) * are identical (the same names of arguments, white spaces in the
#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev, fmt, ## args) * same places) GCC will allow redefinition otherwise (even if some
#define INFO(d, fmt, args...) dev_info(&(d)->gadget->dev, fmt, ## args) * white space is removed or added) warning will be issued. No
* checking if those symbols is defined is performed because warning
* is desired when those macros were defined by someone else to mean
* something else. */
#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args)
#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args)
#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args)
#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args)
#define INFO(d, fmt, args...) dev_info(&(d)->gadget->dev , fmt , ## args)
...@@ -429,7 +437,7 @@ fsg_fs_intr_in_desc = { ...@@ -429,7 +437,7 @@ fsg_fs_intr_in_desc = {
#endif #endif
static const struct usb_descriptor_header *fsg_fs_function[] = { static struct usb_descriptor_header *fsg_fs_function[] = {
#ifndef FSG_NO_OTG #ifndef FSG_NO_OTG
(struct usb_descriptor_header *) &fsg_otg_desc, (struct usb_descriptor_header *) &fsg_otg_desc,
#endif #endif
...@@ -493,7 +501,7 @@ fsg_hs_intr_in_desc = { ...@@ -493,7 +501,7 @@ fsg_hs_intr_in_desc = {
#endif #endif
static const struct usb_descriptor_header *fsg_hs_function[] = { static struct usb_descriptor_header *fsg_hs_function[] = {
#ifndef FSG_NO_OTG #ifndef FSG_NO_OTG
(struct usb_descriptor_header *) &fsg_otg_desc, (struct usb_descriptor_header *) &fsg_otg_desc,
#endif #endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7