Commit d260a7af authored by Shawn Guo's avatar Shawn Guo

ARM: mxs: remove unneeded enet_out clk initialization

With fec driver taking care of enet_out clk, most of board setup
do not need to enable enet_out clk.  So remove them.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent f231a9fe
...@@ -360,7 +360,6 @@ static inline void enable_clk_enet_out(void) ...@@ -360,7 +360,6 @@ static inline void enable_clk_enet_out(void)
static void __init imx28_evk_init(void) static void __init imx28_evk_init(void)
{ {
enable_clk_enet_out();
update_fec_mac_prop(OUI_FSL); update_fec_mac_prop(OUI_FSL);
mxsfb_pdata.mode_list = mx28evk_video_modes; mxsfb_pdata.mode_list = mx28evk_video_modes;
...@@ -391,11 +390,6 @@ static void __init m28evk_init(void) ...@@ -391,11 +390,6 @@ static void __init m28evk_init(void)
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
} }
static void __init sc_sps1_init(void)
{
enable_clk_enet_out();
}
static int apx4devkit_phy_fixup(struct phy_device *phy) static int apx4devkit_phy_fixup(struct phy_device *phy)
{ {
phy->dev_flags |= MICREL_PHY_50MHZ_CLK; phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
...@@ -494,7 +488,6 @@ static void __init tx28_post_init(void) ...@@ -494,7 +488,6 @@ static void __init tx28_post_init(void)
static void __init cfa10049_init(void) static void __init cfa10049_init(void)
{ {
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ); update_fec_mac_prop(OUI_CRYSTALFONTZ);
mxsfb_pdata.mode_list = cfa10049_video_modes; mxsfb_pdata.mode_list = cfa10049_video_modes;
...@@ -506,14 +499,11 @@ static void __init cfa10049_init(void) ...@@ -506,14 +499,11 @@ static void __init cfa10049_init(void)
static void __init cfa10037_init(void) static void __init cfa10037_init(void)
{ {
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ); update_fec_mac_prop(OUI_CRYSTALFONTZ);
} }
static void __init apf28_init(void) static void __init apf28_init(void)
{ {
enable_clk_enet_out();
mxsfb_pdata.mode_list = apf28dev_video_modes; mxsfb_pdata.mode_list = apf28dev_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
mxsfb_pdata.default_bpp = 16; mxsfb_pdata.default_bpp = 16;
...@@ -538,8 +528,6 @@ static void __init mxs_machine_init(void) ...@@ -538,8 +528,6 @@ static void __init mxs_machine_init(void)
cfa10049_init(); cfa10049_init();
else if (of_machine_is_compatible("armadeus,imx28-apf28")) else if (of_machine_is_compatible("armadeus,imx28-apf28"))
apf28_init(); apf28_init();
else if (of_machine_is_compatible("schulercontrol,imx28-sps1"))
sc_sps1_init();
of_platform_populate(NULL, of_default_bus_match_table, of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL); mxs_auxdata_lookup, NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment