Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of bug fixes have come in for v4.8 so far.  Since the first
  few were originally meant to go into -rc1 (but didn't get sent in time
  for travel reasons), the branch is unfortunately based on top of a
  commit in the middle of the merge window rather than -rc1.

  Content-wise we have:

   - a fix for the last remaining broken build in kernelci, getting
     mach-shmobile to build again with SMP disabled

   - a fix for a realview regression that broke real hardware but not
     the qemu model that everyone uses in practice (needed for v4.7 as
     well)

   - a merge conflict fix for Tegra that also broke v4.7

   - two Kconfig fixes for arm64 build regressions

   - a couple of arm32 build warning fixes (all harmless)

   - fix the RTC on Exynos7 Espresso (which apparently never worked
     right)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
  arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
  arm64: Kconfig: select ALPINE_MSI only if PCI is selected
  ARM: dts: realview: Fix PBX-A9 cache description
  ARM: tegra: fix erroneous address in dts
  ARM: dts: add syscon compatible string for AP syscon
  ARM: dts: add syscon compatible string for CP syscon
  ARM: oxnas: select reset controller framework
  ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
  ARM: don't include removed directories
  Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
  ARM: shmobile: don't call platform_can_secondary_boot on UP
  MAINTAINER: alpine: add a mailing list
  ARM: do away with final ARCH_REQUIRE_GPIOLIB
  arm64: dts: Fix RTC by providing rtc_src clock

MAINTAINERS

@@ -1004,6 +1004,7 @@ N:	meson
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
 M:	Antoine Tenart <antoine.tenart@free-electrons.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-alpine/
 F:	arch/arm/boot/dts/alpine*

arch/arm/Makefile

@@ -260,12 +260,14 @@ machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
 
 ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
 ifeq ($(KBUILD_SRC),)
 KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
 else
 KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
 endif
 endif
+endif
 
 export	TEXT_OFFSET GZFLAGS MMUEXT
 

arch/arm/boot/dts/arm-realview-pbx-a9.dts

@@ -70,13 +70,12 @@ L2: l2-cache {
 		 * associativity as these may be erroneously set
 		 * up by boot loader(s).
 		 */
-		cache-size = <1048576>; // 1MB
-		cache-sets = <4096>;
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
 		cache-line-size = <32>;
 		arm,parity-disable;
-		arm,tag-latency = <1>;
-		arm,data-latency = <1 1>;
-		arm,dirty-latency = <1>;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
 	};
 
 	scu: scu@1f000000 {

arch/arm/boot/dts/integratorap.dts

@@ -42,7 +42,7 @@ uartclk: uartclk@14.74M {
 	};
 
 	syscon {
-		compatible = "arm,integrator-ap-syscon";
+		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
 		interrupt-parent = <&pic>;
 		/* These are the logical module IRQs */

arch/arm/boot/dts/integratorcp.dts

@@ -94,7 +94,7 @@ timclk: timclk@1M {
 	};
 
 	syscon {
-		compatible = "arm,integrator-cp-syscon";
+		compatible = "arm,integrator-cp-syscon", "syscon";
 		reg = <0xcb000000 0x100>;
 	};
 

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -1382,7 +1382,7 @@ dsi_b {
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@ serial@70006000 {
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

arch/arm/configs/aspeed_g4_defconfig

@@ -58,7 +58,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=1
+CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_PAGE_POISONING=y

arch/arm/configs/aspeed_g5_defconfig

@@ -59,7 +59,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=1
+CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_PAGE_POISONING=y

arch/arm/mach-clps711x/Kconfig

 menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
-	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
 	select CLKSRC_OF
 	select CLPS711X_TIMER
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MFD_SYSCON
 	select OF_IRQ
 	select USE_OF

arch/arm/mach-mvebu/Makefile

-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-orion/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
 
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 CFLAGS_pmsu.o			:= -march=armv7-a

arch/arm/mach-oxnas/Kconfig

@@ -11,11 +11,13 @@ if ARCH_OXNAS
 
 config MACH_OX810SE
 	bool "Support OX810SE Based Products"
+	select ARCH_HAS_RESET_CONTROLLER
 	select COMMON_CLK_OXNAS
 	select CPU_ARM926T
 	select MFD_SYSCON
 	select OXNAS_RPS_TIMER
 	select PINCTRL_OXNAS
+	select RESET_CONTROLLER
 	select RESET_OXNAS
 	select VERSATILE_FPGA_IRQ
 	help

arch/arm/mach-pxa/corgi.c

@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/major.h>

arch/arm/mach-pxa/spitz.c

@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>

arch/arm/mach-realview/Makefile

 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-versatile/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
 
 obj-y					:= core.o
 obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o

arch/arm/mach-s5pv210/Makefile

@@ -5,7 +5,7 @@
 #
 # Licensed under GPLv2
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include
 
 # Core
 

arch/arm/mach-shmobile/platsmp.c

@@ -40,5 +40,8 @@ bool shmobile_smp_cpu_can_disable(unsigned int cpu)
 bool __init shmobile_smp_init_fallback_ops(void)
 {
 	/* fallback on PSCI/smp_ops if no other DT based method is detected */
+	if (!IS_ENABLED(CONFIG_SMP))
+		return false;
+
 	return platform_can_secondary_boot() ? true : false;
 }

arch/arm64/Kconfig.platforms

@@ -8,7 +8,7 @@ config ARCH_SUNXI
 
 config ARCH_ALPINE
 	bool "Annapurna Labs Alpine platform"
-	select ALPINE_MSI
+	select ALPINE_MSI if PCI
 	help
 	  This enables support for the Annapurna Labs Alpine
 	  Soc family.
@@ -66,7 +66,7 @@ config ARCH_LG1K
 config ARCH_HISI
 	bool "Hisilicon SoC Family"
 	select ARM_TIMER_SP804
-	select HISILICON_IRQ_MBIGEN
+	select HISILICON_IRQ_MBIGEN if PCI
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 

arch/arm64/boot/dts/exynos/exynos7-espresso.dts

@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "exynos7.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -43,6 +44,8 @@ &serial_2 {
 
 &rtc {
 	status = "okay";
+	clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &watchdog {