Skip to content

L
linux
Commit d35cbff8 authored by Paul Mackerras's avatar Paul Mackerras
Browse files
Options

PPC32: Add support for the IBM405LP-based "Beech" board

parent f55d5107
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1085 additions and 2 deletions
arch/ppc/configs/beech_defconfig 0 → 100644
View file @ d35cbff8
This diff is collapsed.
arch/ppc/platforms/4xx/Kconfig
View file @ d35cbff8
......@@ -13,6 +13,9 @@ choice
config ASH
bool "Ash"
config BEECH
bool "Beech"
config CEDAR
bool "Cedar"
......@@ -75,7 +78,7 @@ config IBM405_ERR51
config IBM_OCP
bool
depends on ASH || CEDAR || CPCI405 || EP405 || REDWOOD_4 || REDWOOD_5 || WALNUT
depends on ASH || BEECH || CEDAR || CPCI405 || EP405 || REDWOOD_4 || REDWOOD_5 || WALNUT
default y
config NP405L
......@@ -110,7 +113,7 @@ config EMBEDDEDBOOT
config IBM_OPENBIOS
bool
depends on ASH || CEDAR || REDWOOD_4 || REDWOOD_5 || WALNUT
depends on ASH || BEECH || CEDAR || REDWOOD_4 || REDWOOD_5 || WALNUT
default y
config 405_DMA
......
arch/ppc/platforms/4xx/Makefile
View file @ d35cbff8
......@@ -2,6 +2,7 @@
# Makefile for the PowerPC 4xx linux kernel.
obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BEECH) += beech.o
obj-$(CONFIG_CEDAR) += cedar.o
obj-$(CONFIG_CPCI405) += cpci405.o
obj-$(CONFIG_EP405) += ep405.o
......
arch/ppc/platforms/4xx/beech.c 0 → 100644
View file @ d35cbff8
/*
* arch/ppc/platforms/beech.c Platform setup for the IBM Beech board
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (C) 2002, International Business Machines Corporation
* All Rights Reserved
*
* Bishop Brock
* IBM Research, Austin Center for Low-Power Computing
* bcbrock@us.ibm.com
* March, 2002
*
*/
#include <linux/blk.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/rtc.h>
#include <linux/string.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/todc.h>
static void beech_ebc_setup(void);
static void beech_fpga_setup(void);
/*
Beech board physical memory map:
Main Memory (Initialized by the BIOS)
=======================================================================
SDRAM (64 MB) 0x00000000 - 0x04000000
OPB Space: (Mapped virtual = physical in ppc4xx_setup.c)
=======================================================================
UART0 0xEF600300
UART1 0xEF600400
IIC 0xEF600500
OPB Arbiter 0xEF600600
GPIO Controller 0xEF600700
CODEC Interface 0xEF600900
Touch Panel Controller 0xEF600A00
DES Controller 0xEF600B00
EBC Space: (Mapped virtual = physical in ppc4xx_map_io(); EBC setup
for PCMCIA left to 4xx_pccf)
Space EBC Bank Physical Addresses EBC Base Address
=========================================================================
PCMCIA (32 MB) x F0000000 - F1FFFFFF F0000000
Expansion 2 F8000000 - F8FFFFFF F8000000
Linux Flash (16 MB) F9000000 - F9FFFFFF
NVRAM (32 KB) 1 FFE00000 - FFE07FFF FFE00000
Ethernet(I/O) 1 FFE20300 - FFE2030F FFE00000
(MEM) FFE40000 - FFE40FFF
FPGA_REG_4 1 FFE60000 - FFE60000 FFE00000
FPGA_REG_0 1 FFE80000 - FFE80000 FFE00000
FPGA_REG_1 1 FFEA0000 - FFEA0000 FFE00000
FPGA_REG_2 1 FFEC0000 - FFEC0000 FFE00000
FPGA_REG_3 1 FFEE0000 - FFEE0000 FFE00000
SRAM (512 KB) 0 FFF00000 - FFF7FFFF FFF00000
Boot Flash (512 KB) 0 FFF80000 - FFFFFFFF FFF00000
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NB: On Beech 1, address ranges for Bank 2 were reversed
*/
void __init
beech_setup_arch(void)
{
ppc4xx_setup_arch();
TODC_INIT(TODC_TYPE_DCR146818, NULL, NULL, NULL, 8);
/* Set up Beech FPGA. */
beech_fpga_setup();
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = beech_setup_arch;
#ifdef CONFIG_PPC_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_dcr146818_read_val;
ppc_md.nvram_write_val = todc_dcr146818_write_val;
#endif
/* Disable the LCD controller, which may have been left on by the
BIOS. Then do initialization of the EBC. */
mtdcri(DCRN_LCD0, DER, 0);
beech_ebc_setup();
}
/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Non-standard board support follows
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
/****************************************************************************
* EBC Setup
****************************************************************************/
/* The EBC is set up for Beech. This may simply replicate the setup already
done by the IBM BIOS for Beech (possibly with some address map changes), or
may be the first initialization if the board is booting from another BIOS.
Virtually all that is required to boot Linux on Beech is that the BIOS
enable the memory controller, load a Linux image from flash, and run it.
For optimal dynamic frequency scaling the EBC settings will also vary as the
frequency varies.
*/
static void __init
beech_ebc_setup(void)
{
ebc0_bnap_t ap;
ebc0_bncr_t cr;
/* Set EBC bank 0 for the SRAM and boot flash.
Access parameters assume 120ns AMD flash @ 66.66 MHz maximum bus
speed = 8 cycle access with 2 turnaround cycles (30 ns).
These parameters will work for the SRAM as well, which is a 70 ns
part.
NB: IBM BIOS sets this bank to burst, however bursting will never
happen in Linux because this region is mapped non-cacheable and
guarded, so it is set non-burst here. */
cr.reg = (BEECH_BANK0_PADDR & 0xfff00000) |
(mfdcri(DCRN_EBC0, BnCR(0)) & EBC0_BnCR_MASK);
cr.fields.bs = BEECH_BANK0_EBC_SIZE;
cr.fields.bu = EBC0_BnCR_BU_RW;
cr.fields.bw = EBC0_BnCR_BW_16;
mtdcri(DCRN_EBC0, BnCR(0), cr.reg);
ap.reg = mfdcri(DCRN_EBC0, BnAP(0)) & EBC0_BnAP_MASK;
ap.fields.twt = 8;
ap.fields.th = 2;
mtdcri(DCRN_EBC0, BnAP(0), ap.reg);
/* EBC bank 1 is used for many purposes: NVRAM, Ethernet, and FPGA
registers. This is a 1 MB, 16-bit bank. The access parameters must
handle the worst case of all of the devices.
The Ethernet chip needs 20 ns setup of the addresses to the I/O
write signal (generated from the chip select), a minimum 150 ns
cycle, and 30 ns of turnaround. These settings will work for the
other devices as well.
*/
cr.reg = (BEECH_BANK1_PADDR & 0xfff00000) |
(mfdcri(DCRN_EBC0, BnCR(1)) & EBC0_BnCR_MASK);
cr.fields.bs = BEECH_BANK1_EBC_SIZE;
cr.fields.bu = EBC0_BnCR_BU_RW;
cr.fields.bw = EBC0_BnCR_BW_16;
mtdcri(DCRN_EBC0, BnCR(1), cr.reg);
ap.reg = mfdcri(DCRN_EBC0, BnAP(1)) & EBC0_BnAP_MASK;
ap.fields.twt = 10;
ap.fields.csn = 2;
ap.fields.th = 2;
mtdcri(DCRN_EBC0, BnAP(1), ap.reg);
/* Set EBC bank 2 for the big (Linux) flash. There is 16 MB of flash,
but the CPLD decodes a 32 MB region.
Access parameters assume 90ns AMD flash @ 66.66 MHz maximum bus
speed = 6 cycle access with 2 turnaround cycles (30 ns).
NB: IBM BIOS sets this bank to burst, however bursting will never
happen in Linux because this region is mapped non-cacheable and
guarded, so it is set non-burst here. */
cr.reg = (BEECH_BANK2_PADDR & 0xfff00000) |
(mfdcri(DCRN_EBC0, BnCR(2)) & EBC0_BnCR_MASK);
cr.fields.bs = BEECH_BANK2_EBC_SIZE;
cr.fields.bu = EBC0_BnCR_BU_RW;
cr.fields.bw = EBC0_BnCR_BW_8;
mtdcri(DCRN_EBC0, BnCR(2), cr.reg);
ap.reg = mfdcri(DCRN_EBC0, BnAP(2)) & EBC0_BnAP_MASK;
ap.fields.twt = 6;
ap.fields.th = 2;
mtdcri(DCRN_EBC0, BnAP(2), ap.reg);
}
/****************************************************************************
* FPGA Setup
****************************************************************************/
/* The Beech FPGA is set up for Linux. */
static void __init
beech_fpga_setup(void)
{
volatile u8 *fpga_reg_2;
fpga_reg_2 = (volatile u8 *)
ioremap(BEECH_FPGA_REG_2_PADDR, BEECH_FPGA_REG_2_SIZE);
/* Set RTS/CTS mode for UART 1 */
*fpga_reg_2 |= FPGA_REG_2_DEFAULT_UART1_N;
}
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
arch/ppc/platforms/4xx/beech.h 0 → 100755
View file @ d35cbff8
/*
* include/asm-ppc/platforms/beech.h Platform definitions for the IBM Beech
* board
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (C) 2002, International Business Machines Corporation
* All Rights Reserved.
*
* Bishop Brock
* IBM Research, Austin Center for Low-Power Computing
* bcbrock@us.ibm.com
* March, 2002
*
*/
#ifdef __KERNEL__
#ifndef __ASM_BEECH_H__
#define __ASM_BEECH_H__
#include <platforms/4xx/ibm405lp.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the standard boot
* ROM on the IBM Beech board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*/
typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned long bi_tbfreq; /* Frequency of SysTmrClk */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned long sysclock_period; /* SysClk period in ns */
unsigned long sys_speed; /* SysCLk frequency in Hz */
unsigned long bi_intfreq; /* Processor speed, in Hz */
unsigned long vco_speed; /* PLL VCO speed, in Hz */
unsigned long bi_busfreq; /* PLB Bus speed, in Hz */
unsigned long opb_speed; /* OPB Bus speed, in Hz */
unsigned long ebc_speed; /* EBC Bus speed, in Hz */
} bd_t;
/* See beech.c for a concise diagram of the Beech physical memory map. */
#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
/* EBC Bank 0 controls the boot flash and SRAM */
#define BEECH_BANK0_PADDR ((uint)0xfff00000)
#define BEECH_BANK0_EBC_SIZE EBC0_BnCR_BS_1MB
#define BEECH_SRAM_PADDR BEECH_BANK0_PADDR
#define BEECH_SRAM_SIZE ((uint)(512 * 1024))
#define BEECH_BOOTFLASH_PADDR (BEECH_BANK0_PADDR + (512 * 1024))
#define BEECH_BOOTFLASH_SIZE ((uint)(512 * 1024))
/* EBC bank 1 controls the NVRAM, Ethernet and CPLD registers. The different
areas are mapped in as small an area as possible to help catch any kernel
addressing errors.
NVRAM is improperly connected on Beech Pass 1. Only every other location is
accessible. This is a 32 KB NVRAM.
The Ethernet chip maps 13 address lines. We only map the "I/O" space used by
the current driver.
The FPGA "registers" are decoded on 128 KB boundarys. Each is mapped in a
separate page. */
#define BEECH_BANK1_PADDR ((uint)0xffe00000)
#define BEECH_BANK1_EBC_SIZE EBC0_BnCR_BS_1MB
#define BEECH_NVRAM_PADDR BEECH_BANK1_PADDR
#define BEECH_NVRAM_SIZE ((uint) (32 * 1024))
#define BEECH_ETHERNET_PADDR (BEECH_BANK1_PADDR + 0x00020000)
#define BEECH_ETHERNET_SIZE ((uint) (8 * 1024))
#define BEECH_FPGA_REG_0_PADDR (BEECH_BANK1_PADDR + 0x00080000)
#define BEECH_FPGA_REG_0_SIZE PAGE_SIZE
#define BEECH_FPGA_REG_1_PADDR (BEECH_BANK1_PADDR + 0x000A0000)
#define BEECH_FPGA_REG_1_SIZE PAGE_SIZE
#define BEECH_FPGA_REG_2_PADDR (BEECH_BANK1_PADDR + 0x000C0000)
#define BEECH_FPGA_REG_2_SIZE PAGE_SIZE
#define BEECH_FPGA_REG_3_PADDR (BEECH_BANK1_PADDR + 0x000E0000)
#define BEECH_FPGA_REG_3_SIZE PAGE_SIZE
#define BEECH_FPGA_REG_4_PADDR (BEECH_BANK1_PADDR + 0x00060000)
#define BEECH_FPGA_REG_4_SIZE PAGE_SIZE
/* FPGA Register Bits (From IBM BIOS) [ May not be valid for Beech Pass 1 ]*/
#define FPGA_REG_0_FLASH_N 0x01
#define FPGA_REG_0_FLASH_ONBD_N 0x02
#define FPGA_REG_0_HITA_TOSH_N 0x04 /* New in Pass 2 */
#define FPGA_REG_0_STAT_OC 0x20
#define FPGA_REG_0_AC_SOURCE_SEL_N 0x40
#define FPGA_REG_0_AC_ACTIVE_N 0x80
#define FPGA_REG_1_USB_ACTIVE 0x01 /* New in Pass 2 */
#define FPGA_REG_1_CLK_VARIABLE 0x02
#define FPGA_REG_1_CLK_TEST 0x04
#define FPGA_REG_1_CLK_SS 0x08
#define FPGA_REG_1_EXT_IRQ_N 0x10
#define FPGA_REG_1_SMI_MODE_N 0x20
#define FPGA_REG_1_BATT_LOW_N 0x40
#define FPGA_REG_1_PCMCIA_PWR_FAULT_N 0x80
#define FPGA_REG_2_DEFAULT_UART1_N 0x01
#define FPGA_REG_2_EN_1_8V_PLL_N 0x02
#define FPGA_REG_2_PC_BUF_EN_N 0x08
#define FPGA_REG_2_CODEC_RESET_N 0x10 /* New in Pass 2 */
#define FPGA_REG_2_TP_JSTICK_N 0x20 /* New in Pass 2 */
#define FPGA_REG_3_GAS_GAUGE_IO 0x01
#define FPGA_REG_4_SDRAM_CLK3_ENAB 0x01
#define FPGA_REG_4_SDRAM_CLK2_ENAB 0x02
#define FPGA_REG_4_SDRAM_CLK1_ENAB 0x04
#define FPGA_REG_4_SDRAM_CLK0_ENAB 0x08
#define FPGA_REG_4_PCMCIA_5V 0x10 /* New in Pass 2 */
#define FPGA_REG_4_IRQ3 0x20 /* New in Pass 2 */
/* EBC Bank 2 contains the 16 MB "Linux" flash. The FPGA decodes a 32 MB
bank. The lower 16 MB are available for expansion devices. The upper 16 MB
are used for the "Linux" flash.
Partitioning information is for the benefit of the MTD driver. See
drivers/mtd/maps/ibm4xx.c. We currently allocate the lower 1 MB for a
kernel, and the other 15 MB for a filesystem.
*/
/* Bank 2 mappings changed between Beech Pass 1 and Pass 2 */
#ifdef CONFIG_BEECH_PASS1
#define BEECH_BIGFLASH_OFFSET 0
#else
#define BEECH_BIGFLASH_OFFSET (16 * 1024 * 1024)
#endif
#define BEECH_BANK2_PADDR ((uint)0xf8000000)
#define BEECH_BANK2_EBC_SIZE EBC0_BnCR_BS_32MB
#define BEECH_BIGFLASH_PADDR (BEECH_BANK2_PADDR + BEECH_BIGFLASH_OFFSET)
#define BEECH_BIGFLASH_SIZE (16 * 1024 * 1024)
#define BEECH_KERNEL_OFFSET 0
#define BEECH_KERNEL_SIZE (1 * 1024 * 1024)
#define BEECH_FREE_AREA_OFFSET BEECH_KERNEL_SIZE
#define BEECH_FREE_AREA_SIZE (BEECH_BIGFLASH_SIZE - BEECH_KERNEL_SIZE)
/* The PCMCIA controller driver 4xx_pccf.c is responsible for the EBC setup of
PCMCIA. Externally, EBC bank selects 3..7 take on PCMCIA functions when
PCMCIA is enabled. */
#define BEECH_PCMCIA_PADDR ((uint)0xf0000000)
#define BEECH_PCMCIA_SIZE ((uint)(32 * 1024 * 1024))
/* We do not currently support the internal clock mode for the UART. This
limits the minimum OPB frequency to just over 2X the UART oscillator
frequency. At OPB frequencies less than this the serial port will not
function due to the way that SerClk is sampled. */
#define PPC4xx_SERCLK_FREQ 11059200
#define BASE_BAUD (PPC4xx_SERCLK_FREQ / 16)
#define PPC4xx_MACHINE_NAME "IBM 405LP Beech"
/****************************************************************************
* Non-standard board support follows
****************************************************************************/
extern int beech_sram_free(void *p);
extern int ibm405lp_set_pixclk(unsigned pixclk_low, unsigned pixclk_high);
extern void *beech_sram_alloc(size_t size);
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_BEECH_H__ */
#endif /* __KERNEL__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7