Commit d3f16219 authored by Josef Gajdusek's avatar Josef Gajdusek Committed by Jonathan Cameron

staging:iio:hmc5843: Add support for spi hmc5983

This patch adds support for the hmc5983 spi interface.
This chip is almost identical to the hmc5883. The difference being added
temperature compensation, additional available sample rate (220Hz) and an SPI
interface.
Signed-off-by: default avatarJosef Gajdusek <atx@atx.name>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 5a059bd2
...@@ -22,4 +22,19 @@ config SENSORS_HMC5843_I2C ...@@ -22,4 +22,19 @@ config SENSORS_HMC5843_I2C
- hmc5843_core (core functions) - hmc5843_core (core functions)
- hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
config SENSORS_HMC5843_SPI
tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
depends on SPI_MASTER
select SENSORS_HMC5843
select REGMAP_SPI
help
Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
(digital compass).
This driver can also be compiled as a set of modules.
If so, these modules will be created:
- hmc5843_core (core functions)
- hmc5843_spi (support for HMC5983)
endmenu endmenu
...@@ -4,3 +4,4 @@ ...@@ -4,3 +4,4 @@
obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o
obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o
obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o
/*
* SPI driver for hmc5983
*
* Copyright (C) Josef Gajdusek <atx@atx.name>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* */
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include "hmc5843.h"
static const struct regmap_range hmc5843_readable_ranges[] = {
regmap_reg_range(0, HMC5843_ID_END),
};
static struct regmap_access_table hmc5843_readable_table = {
.yes_ranges = hmc5843_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
};
static const struct regmap_range hmc5843_writable_ranges[] = {
regmap_reg_range(0, HMC5843_MODE_REG),
};
static struct regmap_access_table hmc5843_writable_table = {
.yes_ranges = hmc5843_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
};
static const struct regmap_range hmc5843_volatile_ranges[] = {
regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
};
static struct regmap_access_table hmc5843_volatile_table = {
.yes_ranges = hmc5843_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
};
static struct regmap_config hmc5843_spi_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.rd_table = &hmc5843_readable_table,
.wr_table = &hmc5843_writable_table,
.volatile_table = &hmc5843_volatile_table,
/* Autoincrement address pointer */
.read_flag_mask = 0xc0,
.cache_type = REGCACHE_RBTREE,
};
static int hmc5843_spi_probe(struct spi_device *spi)
{
int ret;
spi->mode = SPI_MODE_3;
spi->max_speed_hz = 8000000;
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret)
return ret;
return hmc5843_common_probe(&spi->dev,
devm_regmap_init_spi(spi, &hmc5843_spi_regmap_config),
HMC5983_ID);
}
static int hmc5843_spi_remove(struct spi_device *spi)
{
return hmc5843_common_remove(&spi->dev);
}
static const struct spi_device_id hmc5843_id[] = {
{ "hmc5983", HMC5983_ID },
{ }
};
static struct spi_driver hmc5843_driver = {
.driver = {
.name = "hmc5843",
.pm = HMC5843_PM_OPS,
.owner = THIS_MODULE,
},
.id_table = hmc5843_id,
.probe = hmc5843_spi_probe,
.remove = hmc5843_spi_remove,
};
module_spi_driver(hmc5843_driver);
MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
MODULE_DESCRIPTION("HMC5983 SPI driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment