Skip to content

L
linux
Commit d41ef540 authored by Chao Xie's avatar Chao Xie Committed by Michael Turquette
Browse files
Options

arm: mmp: Make use of the DT supported clock 

Change the dtsi and dts file, soc initialization code to make
use of DT support clock.
So now in the code we do only need call of_clk_init to initialize
the clocks.
Signed-off-by: default avatarChao Xie <chao.xie@marvell.com>
Acked-by: default avatarHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: default avatarMichael Turquette <mturquette@linaro.org>
parent 51454eb4
Show whitespace changes
Inline Side-by-side
Showing with 111 additions and 62 deletions
arch/arm/boot/dts/mmp2.dtsi
View file @ d41ef540
......@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,mmp2.h>
/ {
aliases {
......@@ -135,6 +136,8 @@ uart1: uart@d4030000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4030000 0x1000>;
interrupts = <27>;
clocks = <&soc_clocks MMP2_CLK_UART0>;
resets = <&soc_clocks MMP2_CLK_UART0>;
status = "disabled";
};
......@@ -142,6 +145,8 @@ uart2: uart@d4017000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <28>;
clocks = <&soc_clocks MMP2_CLK_UART1>;
resets = <&soc_clocks MMP2_CLK_UART1>;
status = "disabled";
};
......@@ -149,6 +154,8 @@ uart3: uart@d4018000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <24>;
clocks = <&soc_clocks MMP2_CLK_UART2>;
resets = <&soc_clocks MMP2_CLK_UART2>;
status = "disabled";
};
......@@ -156,6 +163,8 @@ uart4: uart@d4016000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4016000 0x1000>;
interrupts = <46>;
clocks = <&soc_clocks MMP2_CLK_UART3>;
resets = <&soc_clocks MMP2_CLK_UART3>;
status = "disabled";
};
......@@ -168,6 +177,8 @@ gpio@d4019000 {
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
clocks = <&soc_clocks MMP2_CLK_GPIO>;
resets = <&soc_clocks MMP2_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
......@@ -201,6 +212,8 @@ twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
clocks = <&soc_clocks MMP2_CLK_TWSI0>;
resets = <&soc_clocks MMP2_CLK_TWSI0>;
#address-cells = <1>;
#size-cells = <0>;
mrvl,i2c-fast-mode;
......@@ -211,6 +224,8 @@ twsi2: i2c@d4025000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
resets = <&soc_clocks MMP2_CLK_TWSI1>;
status = "disabled";
};
......@@ -220,8 +235,20 @@ rtc: rtc@d4010000 {
interrupts = <1 0>;
interrupt-names = "rtc 1Hz", "rtc alarm";
interrupt-parent = <&intcmux5>;
clocks = <&soc_clocks MMP2_CLK_RTC>;
resets = <&soc_clocks MMP2_CLK_RTC>;
status = "disabled";
};
};
soc_clocks: clocks{
compatible = "marvell,mmp2-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
<0xd4015000 0x1000>;
reg-names = "mpmu", "apmu", "apbc";
#clock-cells = <1>;
#reset-cells = <1>;
};
};
};
arch/arm/boot/dts/pxa168.dtsi
View file @ d41ef540
......@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,pxa168.h>
/ {
aliases {
......@@ -59,6 +60,8 @@ uart1: uart@d4017000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
clocks = <&soc_clocks PXA168_CLK_UART0>;
resets = <&soc_clocks PXA168_CLK_UART0>;
status = "disabled";
};
......@@ -66,6 +69,8 @@ uart2: uart@d4018000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
clocks = <&soc_clocks PXA168_CLK_UART1>;
resets = <&soc_clocks PXA168_CLK_UART1>;
status = "disabled";
};
......@@ -73,6 +78,8 @@ uart3: uart@d4026000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4026000 0x1000>;
interrupts = <29>;
clocks = <&soc_clocks PXA168_CLK_UART2>;
resets = <&soc_clocks PXA168_CLK_UART2>;
status = "disabled";
};
......@@ -84,6 +91,8 @@ gpio@d4019000 {
gpio-controller;
#gpio-cells = <2>;
interrupts = <49>;
clocks = <&soc_clocks PXA168_CLK_GPIO>;
resets = <&soc_clocks PXA168_CLK_GPIO>;
interrupt-names = "gpio_mux";
interrupt-controller;
#interrupt-cells = <1>;
......@@ -110,6 +119,8 @@ twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
clocks = <&soc_clocks PXA168_CLK_TWSI0>;
resets = <&soc_clocks PXA168_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
......@@ -118,6 +129,8 @@ twsi2: i2c@d4025000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
clocks = <&soc_clocks PXA168_CLK_TWSI1>;
resets = <&soc_clocks PXA168_CLK_TWSI1>;
status = "disabled";
};
......@@ -126,8 +139,20 @@ rtc: rtc@d4010000 {
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
clocks = <&soc_clocks PXA168_CLK_RTC>;
resets = <&soc_clocks PXA168_CLK_RTC>;
status = "disabled";
};
};
soc_clocks: clocks{
compatible = "marvell,pxa168-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
<0xd4015000 0x1000>;
reg-names = "mpmu", "apmu", "apbc";
#clock-cells = <1>;
#reset-cells = <1>;
};
};
};
arch/arm/boot/dts/pxa910.dtsi
View file @ d41ef540
......@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,pxa910.h>
/ {
aliases {
......@@ -71,6 +72,8 @@ uart1: uart@d4017000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
clocks = <&soc_clocks PXA910_CLK_UART0>;
resets = <&soc_clocks PXA910_CLK_UART0>;
status = "disabled";
};
......@@ -78,6 +81,8 @@ uart2: uart@d4018000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
clocks = <&soc_clocks PXA910_CLK_UART1>;
resets = <&soc_clocks PXA910_CLK_UART1>;
status = "disabled";
};
......@@ -85,6 +90,8 @@ uart3: uart@d4036000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4036000 0x1000>;
interrupts = <59>;
clocks = <&soc_clocks PXA910_CLK_UART2>;
resets = <&soc_clocks PXA910_CLK_UART2>;
status = "disabled";
};
......@@ -97,6 +104,8 @@ gpio@d4019000 {
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
clocks = <&soc_clocks PXA910_CLK_GPIO>;
resets = <&soc_clocks PXA910_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
......@@ -124,6 +133,8 @@ twsi1: i2c@d4011000 {
#size-cells = <0>;
reg = <0xd4011000 0x1000>;
interrupts = <7>;
clocks = <&soc_clocks PXA910_CLK_TWSI0>;
resets = <&soc_clocks PXA910_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
......@@ -134,6 +145,8 @@ twsi2: i2c@d4037000 {
#size-cells = <0>;
reg = <0xd4037000 0x1000>;
interrupts = <54>;
clocks = <&soc_clocks PXA910_CLK_TWSI1>;
resets = <&soc_clocks PXA910_CLK_TWSI1>;
status = "disabled";
};
......@@ -142,8 +155,21 @@ rtc: rtc@d4010000 {
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
clocks = <&soc_clocks PXA910_CLK_RTC>;
resets = <&soc_clocks PXA910_CLK_RTC>;
status = "disabled";
};
};
soc_clocks: clocks{
compatible = "marvell,pxa910-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
<0xd4015000 0x1000>,
<0xd403b000 0x1000>;
reg-names = "mpmu", "apmu", "apbc", "apbcp";
#clock-cells = <1>;
#reset-cells = <1>;
};
};
};
arch/arm/mach-mmp/Kconfig
View file @ d41ef540
......@@ -86,11 +86,12 @@ config MACH_GPLUGD
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
select CPU_PXA168
select CPU_PXA910
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
select ARCH_HAS_RESET_CONTROLLER
select CPU_MOHAWK
help
Include support for Marvell MMP2 based platforms using
the device tree. Needn't select any other machine while
......@@ -99,10 +100,12 @@ config MACH_MMP_DT
config MACH_MMP2_DT
bool "Support MMP2 (ARMv7) platforms from device tree"
depends on !CPU_MOHAWK
select CPU_MMP2
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
select ARCH_HAS_RESET_CONTROLLER
select CPU_PJ4
help
Include support for Marvell MMP2 based platforms using
the device tree.
......@@ -111,21 +114,18 @@ endmenu
config CPU_PXA168
bool
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
select COMMON_CLK
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
......
arch/arm/mach-mmp/mmp-dt.c
View file @ d41ef540
......@@ -11,63 +11,42 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-tauros2.h>
#include "common.h"
extern void __init mmp_dt_init_timer(void);
static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
{}
static const char *pxa168_dt_board_compat[] __initdata = {
"mrvl,pxa168-aspenite",
NULL,
};
static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
{}
static const char *pxa910_dt_board_compat[] __initdata = {
"mrvl,pxa910-dkb",
NULL,
};
static void __init pxa168_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
pxa168_auxdata_lookup, NULL);
}
static void __init pxa910_dt_init(void)
static void __init mmp_init_time(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
pxa910_auxdata_lookup, NULL);
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
mmp_dt_init_timer();
of_clk_init(NULL);
}
static const char *mmp_dt_board_compat[] __initdata = {
"mrvl,pxa168-aspenite",
"mrvl,pxa910-dkb",
NULL,
};
DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
.map_io = mmp_map_io,
.init_time = mmp_dt_init_timer,
.init_machine = pxa168_dt_init,
.dt_compat = mmp_dt_board_compat,
.init_time = mmp_init_time,
.dt_compat = pxa168_dt_board_compat,
MACHINE_END
DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
.map_io = mmp_map_io,
.init_time = mmp_dt_init_timer,
.init_machine = pxa910_dt_init,
.dt_compat = mmp_dt_board_compat,
.init_time = mmp_init_time,
.dt_compat = pxa910_dt_board_compat,
MACHINE_END
arch/arm/mach-mmp/mmp2-dt.c
View file @ d41ef540
......@@ -12,29 +12,22 @@
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-tauros2.h>
#include "common.h"
extern void __init mmp_dt_init_timer(void);
static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL),
OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
{}
};
static void __init mmp2_dt_init(void)
static void __init mmp_init_time(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
mmp2_auxdata_lookup, NULL);
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
mmp_dt_init_timer();
of_clk_init(NULL);
}
static const char *mmp2_dt_board_compat[] __initdata = {
......@@ -44,7 +37,6 @@ static const char *mmp2_dt_board_compat[] __initdata = {
DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
.map_io = mmp_map_io,
.init_time = mmp_dt_init_timer,
.init_machine = mmp2_dt_init,
.init_time = mmp_init_time,
.dt_compat = mmp2_dt_board_compat,
MACHINE_END
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7