powerpc: Remove stubbed beat smp support

I have no idea if the beat hypervisor supports multiple cpus in
a partition, but the code has not been touched since these stubs
were added in February of 2007 except to move them in April of 2008.
These are stubs: start_cpu always returns fail (which is dropped),
the message passing and reciving are empty functions, and the top
of file comment says "Incomplete".
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/cell/Makefile

@@ -43,7 +43,6 @@ obj-y					+= celleb_setup.o \
 					   beat_hvCall.o beat_interrupt.o \
 					   beat_iommu.o
 
-obj-$(CONFIG_SMP)			+= beat_smp.o
 obj-$(CONFIG_PPC_UDBG_BEAT)		+= beat_udbg.o
 obj-$(CONFIG_SERIAL_TXX9)		+= celleb_scc_sio.o
 obj-$(CONFIG_SPU_BASE)			+= beat_spu_priv1.o

arch/powerpc/platforms/cell/beat_interrupt.c

@@ -257,22 +257,6 @@ void __init beatic_init_IRQ(void)
 	irq_set_default_host(beatic_host);
 }
 
-#ifdef CONFIG_SMP
-
-/* Nullified to compile with SMP mode */
-void beatic_setup_cpu(int cpu)
-{
-}
-
-void beatic_cause_IPI(int cpu, int mesg)
-{
-}
-
-void beatic_request_IPIs(void)
-{
-}
-#endif /* CONFIG_SMP */
-
 void beatic_deinit_IRQ(void)
 {
 	int	i;

arch/powerpc/platforms/cell/beat_interrupt.h

@@ -24,9 +24,6 @@
 
 extern void beatic_init_IRQ(void);
 extern unsigned int beatic_get_irq(void);
-extern void beatic_cause_IPI(int cpu, int mesg);
-extern void beatic_request_IPIs(void);
-extern void beatic_setup_cpu(int);
 extern void beatic_deinit_IRQ(void);
 
 #endif

arch/powerpc/platforms/cell/beat_smp.c

-/*
- * SMP support for Celleb platform. (Incomplete)
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/cell/smp.c:
- * Dave Engebretsen, Peter Bergner, and
- * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
- * Plus various changes from other IBM teams...
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/cpu.h>
-
-#include <asm/irq.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "beat_interrupt.h"
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
- */
-/* static cpumask_t of_spin_map; */
-
-/**
- * smp_startup_cpu() - start the given cpu
- *
- * At boot time, there is nothing to do for primary threads which were
- * started from Open Firmware.  For anything else, call RTAS with the
- * appropriate start location.
- *
- * Returns:
- *	0	- failure
- *	1	- success
- */
-static inline int __devinit smp_startup_cpu(unsigned int lcpu)
-{
-	return 0;
-}
-
-static int __init smp_beatic_probe(void)
-{
-	return cpumask_weight(cpu_possible_mask);
-}
-
-static void __devinit smp_beatic_setup_cpu(int cpu)
-{
-	beatic_setup_cpu(cpu);
-}
-
-static int __devinit smp_celleb_kick_cpu(int nr)
-{
-	BUG_ON(nr < 0 || nr >= NR_CPUS);
-
-	return smp_startup_cpu(nr);
-}
-
-static int smp_celleb_cpu_bootable(unsigned int nr)
-{
-	return 1;
-}
-static struct smp_ops_t bpa_beatic_smp_ops = {
-	.message_pass	= beatic_cause_IPI,
-	.probe		= smp_beatic_probe,
-	.kick_cpu	= smp_celleb_kick_cpu,
-	.setup_cpu	= smp_beatic_setup_cpu,
-	.cpu_bootable	= smp_celleb_cpu_bootable,
-};
-
-/* This is called very early */
-void __init smp_init_celleb(void)
-{
-	DBG(" -> smp_init_celleb()\n");
-
-	smp_ops = &bpa_beatic_smp_ops;
-
-	DBG(" <- smp_init_celleb()\n");
-}

arch/powerpc/platforms/cell/celleb_setup.c

@@ -128,10 +128,6 @@ static void __init celleb_setup_arch_beat(void)
 	spu_management_ops	= &spu_management_of_ops;
 #endif
 
-#ifdef CONFIG_SMP
-	smp_init_celleb();
-#endif
-
 	celleb_setup_arch_common();
 }