Commit d618baf9 authored by Brian Norris's avatar Brian Norris

mtd: brcmnand: clean up flash cache for parameter pages

The read_byte() handling for accessing the flash cache has some awkward
swapping being done in the read_byte() function. Let's just make this a
byte array, and do the swapping with the word-level macros during the
initial buffer copy.

This is just a refactoring patch, with no (intended) functional change.
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Cc: Clay McClure <clay@daemons.net>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <bcm-kernel-feedback-list@broadcom.com>
Tested-by: default avatarClay McClure <clay@daemons.net>
parent c98f71d1
...@@ -134,7 +134,7 @@ struct brcmnand_controller { ...@@ -134,7 +134,7 @@ struct brcmnand_controller {
dma_addr_t dma_pa; dma_addr_t dma_pa;
/* in-memory cache of the FLASH_CACHE, used only for some commands */ /* in-memory cache of the FLASH_CACHE, used only for some commands */
u32 flash_cache[FC_WORDS]; u8 flash_cache[FC_BYTES];
/* Controller revision details */ /* Controller revision details */
const u16 *reg_offsets; const u16 *reg_offsets;
...@@ -1188,6 +1188,8 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command, ...@@ -1188,6 +1188,8 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
if (native_cmd == CMD_PARAMETER_READ || if (native_cmd == CMD_PARAMETER_READ ||
native_cmd == CMD_PARAMETER_CHANGE_COL) { native_cmd == CMD_PARAMETER_CHANGE_COL) {
/* Copy flash cache word-wise */
u32 *flash_cache = (u32 *)ctrl->flash_cache;
int i; int i;
brcmnand_soc_data_bus_prepare(ctrl->soc); brcmnand_soc_data_bus_prepare(ctrl->soc);
...@@ -1197,7 +1199,11 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command, ...@@ -1197,7 +1199,11 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
* SECTOR_SIZE_1K may invalidate it * SECTOR_SIZE_1K may invalidate it
*/ */
for (i = 0; i < FC_WORDS; i++) for (i = 0; i < FC_WORDS; i++)
ctrl->flash_cache[i] = brcmnand_read_fc(ctrl, i); /*
* Flash cache is big endian for parameter pages, at
* least on STB SoCs
*/
flash_cache[i] = be32_to_cpu(brcmnand_read_fc(ctrl, i));
brcmnand_soc_data_bus_unprepare(ctrl->soc); brcmnand_soc_data_bus_unprepare(ctrl->soc);
...@@ -1250,8 +1256,7 @@ static uint8_t brcmnand_read_byte(struct mtd_info *mtd) ...@@ -1250,8 +1256,7 @@ static uint8_t brcmnand_read_byte(struct mtd_info *mtd)
if (host->last_byte > 0 && offs == 0) if (host->last_byte > 0 && offs == 0)
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, addr, -1); chip->cmdfunc(mtd, NAND_CMD_RNDOUT, addr, -1);
ret = ctrl->flash_cache[offs >> 2] >> ret = ctrl->flash_cache[offs];
(24 - ((offs & 0x03) << 3));
break; break;
case NAND_CMD_GET_FEATURES: case NAND_CMD_GET_FEATURES:
if (host->last_byte >= ONFI_SUBFEATURE_PARAM_LEN) { if (host->last_byte >= ONFI_SUBFEATURE_PARAM_LEN) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment