Skip to content

L
linux
Commit d7103600 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'renesas-arm64-dt-for-v5.3' of... 

Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.3

* Renesas SoCs
  - Revise usb2_phy nodes and phys properties according to updated bindings
  - Use ip=on for bootargs

* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
  - Add dynamic power coefficient
  - Create thermal zone to support IPA

* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
  - Point LVDS0 to its companion LVDS1

* R-Car E3 (r8a77990) SoC
  - Corresct register range of DU

* R-Car E3 (r8a77990) based Ebisu board
  - Remove renesas, no-ether-link property

* R-Car D3 (r8a77995) based Draak board:
  - Remove unnecessary index from vin4 port

* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
  - Initial support
  - Describe CPU capacity and topoligy
  - Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0

* RZ/G2E (r8a774c0) SoC based EK874 board:
  - Clean up CPU compatible strings
  - Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN

* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
  arm64: dts: renesas: hihope-common: Remove "label" from LEDs
  arm64: dts: renesas: hihope-common: Add HDMI support
  arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
  arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
  arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
  arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
  arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
  arm64: dts: renesas: hihope-common: Add LEDs support
  arm64: dts: renesas: hihope-common: Enable USB3.0
  arm64: dts: renesas: hihope-common: Add USB 2.0 support
  arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
  arm64: dts: renesas: r8a774a1: Add TMU device nodes
  arm64: dts: renesas: r8a774a1: Add CMT device nodes
  arm64: dts: renesas: hihope-common: Add uSD and eMMC
  arm64: dts: renesas: r8a77990: Fix register range of display node
  arm64: dts: renesas: cat874: Enable usb role switch support
  arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
  arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
  arm64: dts: renesas: hihope-common: Add RWDT support
  arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents cd75dd00 f6130381
Hide whitespace changes
Inline Side-by-side
Showing with 1393 additions and 141 deletions
arch/arm64/boot/dts/renesas/Makefile
View file @ d7103600
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
......
arch/arm64/boot/dts/renesas/hihope-common.dtsi 0 → 100644
View file @ d7103600
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the HiHope RZ/G2[MN] main board common parts
*
* Copyright (C) 2019 Renesas Electronics Corp.
*/
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
serial0 = &scif2;
};
chosen {
bootargs = "ignore_loglevel";
stdout-path = "serial0:115200n8";
};
hdmi0-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi0_con: endpoint {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
};
};
leds {
compatible = "gpio-leds";
led0 {
gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
};
led1 {
gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
};
led2 {
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
led3 {
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
};
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
regulator-name = "USB20_VBUS0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
x302_clk: x302-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <33000000>;
};
x304_clk: x304-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
&du {
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&versaclock5 1>,
<&x302_clk>,
<&versaclock5 2>;
clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&extal_clk {
clock-frequency = <16666666>;
};
&extalr_clk {
clock-frequency = <32768>;
};
&gpio6 {
usb1-reset {
gpio-hog;
gpios = <10 GPIO_ACTIVE_LOW>;
output-low;
line-name = "usb1-reset";
};
};
&hdmi0 {
status = "okay";
ports {
port@1 {
reg = <1>;
rcar_dw_hdmi0_out: endpoint {
remote-endpoint = <&hdmi0_con>;
};
};
};
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c4 {
clock-frequency = <400000>;
status = "okay";
versaclock5: clock-generator@6a {
compatible = "idt,5p49v5923";
reg = <0x6a>;
#clock-cells = <1>;
clocks = <&x304_clk>;
clock-names = "xin";
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
scif_clk_pins: scif_clk {
groups = "scif_clk_a";
function = "scif_clk";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
usb1_pins: usb1 {
mux {
groups = "usb1";
function = "usb1";
};
ovc {
pins = "GP_6_27";
bias-pull-up;
};
};
usb30_pins: usb30 {
groups = "usb30";
function = "usb30";
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
pinctrl-0 = <&sdhi3_pins>;
pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
fixed-emmc-driver-type = <1>;
};
&usb_extal_clk {
clock-frequency = <50000000>;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&vbus0_usb2>;
status = "okay";
};
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_peri0 {
phys = <&usb3_phy0>;
phy-names = "usb";
companion = <&xhci0>;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb3s0_clk {
clock-frequency = <100000000>;
};
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
status = "okay";
};
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi 0 → 100644
View file @ d7103600
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the RZ/G2[MN] HiHope sub board common parts
*
* Copyright (C) 2019 Renesas Electronics Corp.
*/
/ {
aliases {
ethernet0 = &avb;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
};
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
phy-mode = "rgmii-txid";
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
};
};
&pciec0 {
status = "okay";
};
&pciec1 {
status = "okay";
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
avb_pins: avb {
mux {
groups = "avb_link", "avb_mdio", "avb_mii";
function = "avb";
};
pins_mdio {
groups = "avb_mdio";
drive-strength = <24>;
};
pins_mii_tx {
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
drive-strength = <12>;
};
};
};
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts 0 → 100644
View file @ d7103600
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the HiHope RZ/G2M sub board
*
* Copyright (C) 2019 Renesas Electronics Corp.
*/
#include "r8a774a1-hihope-rzg2m.dts"
#include "hihope-rzg2-ex.dtsi"
/ {
model = "HopeRun HiHope RZ/G2M with sub board";
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
"renesas,r8a774a1";
};
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts 0 → 100644
View file @ d7103600
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the HiHope RZ/G2M main board
*
* Copyright (C) 2019 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a774a1.dtsi"
#include "hihope-common.dtsi"
/ {
model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x78000000>;
};
memory@600000000 {
device_type = "memory";
reg = <0x6 0x00000000 0x0 0x80000000>;
};
};
arch/arm64/boot/dts/renesas/r8a774a1.dtsi
View file @ d7103600
...@@ -56,10 +56,78 @@ can_clk: can { ...@@ -56,10 +56,78 @@ can_clk: can {
clock-frequency = <0>; clock-frequency = <0>;
}; };
cluster0_opp: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
};
cluster1_opp: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
};
cpus { cpus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&a57_0>;
};
core1 {
cpu = <&a57_1>;
};
};
cluster1 {
core0 {
cpu = <&a53_0>;
};
core1 {
cpu = <&a53_1>;
};
core2 {
cpu = <&a53_2>;
};
core3 {
cpu = <&a53_3>;
};
};
};
a57_0: cpu@0 { a57_0: cpu@0 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x0>; reg = <0x0>;
...@@ -67,7 +135,11 @@ a57_0: cpu@0 { ...@@ -67,7 +135,11 @@ a57_0: cpu@0 {
power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; power-domains = <&sysc R8A774A1_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>; next-level-cache = <&L2_CA57>;
enable-method = "psci"; enable-method = "psci";
dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
}; };
a57_1: cpu@1 { a57_1: cpu@1 {
...@@ -78,6 +150,9 @@ a57_1: cpu@1 { ...@@ -78,6 +150,9 @@ a57_1: cpu@1 {
next-level-cache = <&L2_CA57>; next-level-cache = <&L2_CA57>;
enable-method = "psci"; enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
}; };
a53_0: cpu@100 { a53_0: cpu@100 {
...@@ -87,7 +162,11 @@ a53_0: cpu@100 { ...@@ -87,7 +162,11 @@ a53_0: cpu@100 {
power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <560>;
}; };
a53_1: cpu@101 { a53_1: cpu@101 {
...@@ -98,6 +177,8 @@ a53_1: cpu@101 { ...@@ -98,6 +177,8 @@ a53_1: cpu@101 {
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <560>;
}; };
a53_2: cpu@102 { a53_2: cpu@102 {
...@@ -108,6 +189,8 @@ a53_2: cpu@102 { ...@@ -108,6 +189,8 @@ a53_2: cpu@102 {
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <560>;
}; };
a53_3: cpu@103 { a53_3: cpu@103 {
...@@ -118,6 +201,8 @@ a53_3: cpu@103 { ...@@ -118,6 +201,8 @@ a53_3: cpu@103 {
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <560>;
}; };
L2_CA57: cache-controller-0 { L2_CA57: cache-controller-0 {
...@@ -326,6 +411,76 @@ pfc: pin-controller@e6060000 { ...@@ -326,6 +411,76 @@ pfc: pin-controller@e6060000 {
reg = <0 0xe6060000 0 0x50c>; reg = <0 0xe6060000 0 0x50c>;
}; };
cmt0: timer@e60f0000 {
compatible = "renesas,r8a774a1-cmt0",
"renesas,rcar-gen3-cmt0";
reg = <0 0xe60f0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 303>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 303>;
status = "disabled";
};
cmt1: timer@e6130000 {
compatible = "renesas,r8a774a1-cmt1",
"renesas,rcar-gen3-cmt1";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 302>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 302>;
status = "disabled";
};
cmt2: timer@e6140000 {
compatible = "renesas,r8a774a1-cmt1",
"renesas,rcar-gen3-cmt1";
reg = <0 0xe6140000 0 0x1004>;
interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 301>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 301>;
status = "disabled";
};
cmt3: timer@e6148000 {
compatible = "renesas,r8a774a1-cmt1",
"renesas,rcar-gen3-cmt1";
reg = <0 0xe6148000 0 0x1004>;
interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 300>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 300>;
status = "disabled";
};
cpg: clock-controller@e6150000 { cpg: clock-controller@e6150000 {
compatible = "renesas,r8a774a1-cpg-mssr"; compatible = "renesas,r8a774a1-cpg-mssr";
reg = <0 0xe6150000 0 0x0bb0>; reg = <0 0xe6150000 0 0x0bb0>;
...@@ -377,6 +532,71 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH ...@@ -377,6 +532,71 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 407>; resets = <&cpg 407>;
}; };
tmu0: timer@e61e0000 {
compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 125>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 125>;
status = "disabled";
};
tmu1: timer@e6fc0000 {
compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
reg = <0 0xe6fc0000 0 0x30>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 124>;
status = "disabled";
};
tmu2: timer@e6fd0000 {
compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
reg = <0 0xe6fd0000 0 0x30>;
interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 123>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 123>;
status = "disabled";
};
tmu3: timer@e6fe0000 {
compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
reg = <0 0xe6fe0000 0 0x30>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 122>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 122>;
status = "disabled";
};
tmu4: timer@ffc00000 {
compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
reg = <0 0xffc00000 0 0x30>;
interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 121>;
clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 121>;
status = "disabled";
};
i2c0: i2c@e6500000 { i2c0: i2c@e6500000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -601,15 +821,15 @@ hsusb: usb@e6590000 { ...@@ -601,15 +821,15 @@ hsusb: usb@e6590000 {
"renesas,rcar-gen3-usbhs"; "renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x200>; reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 704>; resets = <&cpg 704>, <&cpg 703>;
status = "disabled"; status = "disabled";
}; };
...@@ -686,6 +906,14 @@ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH ...@@ -686,6 +906,14 @@ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 219>; resets = <&cpg 219>;
#dma-cells = <1>; #dma-cells = <1>;
dma-channels = <16>; dma-channels = <16>;
iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
<&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
<&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
<&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
<&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
<&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
<&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
<&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
}; };
dmac1: dma-controller@e7300000 { dmac1: dma-controller@e7300000 {
...@@ -720,6 +948,14 @@ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH ...@@ -720,6 +948,14 @@ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 218>; resets = <&cpg 218>;
#dma-cells = <1>; #dma-cells = <1>;
dma-channels = <16>; dma-channels = <16>;
iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
<&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
<&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
<&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
<&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
<&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
<&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
<&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
}; };
dmac2: dma-controller@e7310000 { dmac2: dma-controller@e7310000 {
...@@ -754,6 +990,14 @@ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH ...@@ -754,6 +990,14 @@ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 217>; resets = <&cpg 217>;
#dma-cells = <1>; #dma-cells = <1>;
dma-channels = <16>; dma-channels = <16>;
iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
<&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
<&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
<&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
<&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
<&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
<&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
<&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
}; };
ipmmu_ds0: mmu@e6740000 { ipmmu_ds0: mmu@e6740000 {
...@@ -869,6 +1113,7 @@ avb: ethernet@e6800000 { ...@@ -869,6 +1113,7 @@ avb: ethernet@e6800000 {
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>; resets = <&cpg 812>;
phy-mode = "rgmii"; phy-mode = "rgmii";
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -1629,6 +1874,14 @@ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH ...@@ -1629,6 +1874,14 @@ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 502>; resets = <&cpg 502>;
#dma-cells = <1>; #dma-cells = <1>;
dma-channels = <16>; dma-channels = <16>;
iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
<&ipmmu_mp 2>, <&ipmmu_mp 3>,
<&ipmmu_mp 4>, <&ipmmu_mp 5>,
<&ipmmu_mp 6>, <&ipmmu_mp 7>,
<&ipmmu_mp 8>, <&ipmmu_mp 9>,
<&ipmmu_mp 10>, <&ipmmu_mp 11>,
<&ipmmu_mp 12>, <&ipmmu_mp 13>,
<&ipmmu_mp 14>, <&ipmmu_mp 15>;
}; };
audma1: dma-controller@ec720000 { audma1: dma-controller@ec720000 {
...@@ -1663,6 +1916,14 @@ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH ...@@ -1663,6 +1916,14 @@ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
resets = <&cpg 501>; resets = <&cpg 501>;
#dma-cells = <1>; #dma-cells = <1>;
dma-channels = <16>; dma-channels = <16>;
iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
<&ipmmu_mp 18>, <&ipmmu_mp 19>,
<&ipmmu_mp 20>, <&ipmmu_mp 21>,
<&ipmmu_mp 22>, <&ipmmu_mp 23>,
<&ipmmu_mp 24>, <&ipmmu_mp 25>,
<&ipmmu_mp 26>, <&ipmmu_mp 27>,
<&ipmmu_mp 28>, <&ipmmu_mp 29>,
<&ipmmu_mp 30>, <&ipmmu_mp 31>;
}; };
xhci0: usb@ee000000 { xhci0: usb@ee000000 {
...@@ -1691,11 +1952,11 @@ ohci0: usb@ee080000 { ...@@ -1691,11 +1952,11 @@ ohci0: usb@ee080000 {
compatible = "generic-ohci"; compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 703>; resets = <&cpg 703>, <&cpg 704>;
status = "disabled"; status = "disabled";
}; };
...@@ -1704,7 +1965,7 @@ ohci1: usb@ee0a0000 { ...@@ -1704,7 +1965,7 @@ ohci1: usb@ee0a0000 {
reg = <0 0xee0a0000 0 0x100>; reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
...@@ -1715,12 +1976,12 @@ ehci0: usb@ee080100 { ...@@ -1715,12 +1976,12 @@ ehci0: usb@ee080100 {
compatible = "generic-ehci"; compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 703>; resets = <&cpg 703>, <&cpg 704>;
status = "disabled"; status = "disabled";
}; };
...@@ -1729,7 +1990,7 @@ ehci1: usb@ee0a0100 { ...@@ -1729,7 +1990,7 @@ ehci1: usb@ee0a0100 {
reg = <0 0xee0a0100 0 0x100>; reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci1>; companion = <&ohci1>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
...@@ -1742,10 +2003,10 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -1742,10 +2003,10 @@ usb2_phy0: usb-phy@ee080200 {
"renesas,rcar-gen3-usb2-phy"; "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>; reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 703>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -1756,7 +2017,7 @@ usb2_phy1: usb-phy@ee0a0200 { ...@@ -1756,7 +2017,7 @@ usb2_phy1: usb-phy@ee0a0200 {
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -1825,6 +2086,70 @@ gic: interrupt-controller@f1010000 { ...@@ -1825,6 +2086,70 @@ gic: interrupt-controller@f1010000 {
resets = <&cpg 408>; resets = <&cpg 408>;
}; };
pciec0: pcie@fe000000 {
compatible = "renesas,pcie-r8a774a1",
"renesas,pcie-rcar-gen3";
reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 319>;
status = "disabled";
};
pciec1: pcie@ee800000 {
compatible = "renesas,pcie-r8a774a1",
"renesas,pcie-rcar-gen3";
reg = <0 0xee800000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 318>;
status = "disabled";
};
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 119>;
power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 119>;
renesas,fcp = <&fcpf0>;
};
fcpf0: fcp@fe950000 { fcpf0: fcp@fe950000 {
compatible = "renesas,fcpf"; compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>; reg = <0 0xfe950000 0 0x200>;
...@@ -1877,6 +2202,61 @@ fcpvi0: fcp@fe9af000 { ...@@ -1877,6 +2202,61 @@ fcpvi0: fcp@fe9af000 {
iommus = <&ipmmu_vc0 19>; iommus = <&ipmmu_vc0 19>;
}; };
vspb: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 626>;
power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 626>;
renesas,fcp = <&fcpvb0>;
};
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x5000>;
interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 623>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 623>;
renesas,fcp = <&fcpvd0>;
};
vspd1: vsp@fea28000 {
compatible = "renesas,vsp2";
reg = <0 0xfea28000 0 0x5000>;
interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 622>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 622>;
renesas,fcp = <&fcpvd1>;
};
vspd2: vsp@fea30000 {
compatible = "renesas,vsp2";
reg = <0 0xfea30000 0 0x5000>;
interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 621>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 621>;
renesas,fcp = <&fcpvd2>;
};
vspi0: vsp@fe9a0000 {
compatible = "renesas,vsp2";
reg = <0 0xfe9a0000 0 0x8000>;
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 631>;
power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 631>;
renesas,fcp = <&fcpvi0>;
};
csi20: csi2@fea80000 { csi20: csi2@fea80000 {
compatible = "renesas,r8a774a1-csi2"; compatible = "renesas,r8a774a1-csi2";
reg = <0 0xfea80000 0 0x10000>; reg = <0 0xfea80000 0 0x10000>;
...@@ -1988,6 +2368,101 @@ csi40vin7: endpoint@7 { ...@@ -1988,6 +2368,101 @@ csi40vin7: endpoint@7 {
}; };
}; };
hdmi0: hdmi@fead0000 {
compatible = "renesas,r8a774a1-hdmi",
"renesas,rcar-gen3-hdmi";
reg = <0 0xfead0000 0 0x10000>;
interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 729>,
<&cpg CPG_CORE R8A774A1_CLK_HDMI>;
clock-names = "iahb", "isfr";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 729>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dw_hdmi0_in: endpoint {
remote-endpoint = <&du_out_hdmi0>;
};
};
port@1 {
reg = <1>;
};
port@2 {
/* HDMI sound */
reg = <2>;
};
};
};
du: display@feb00000 {
compatible = "renesas,du-r8a774a1";
reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>;
clock-names = "du.0", "du.1", "du.2";
status = "disabled";
vsps = <&vspd0 &vspd1 &vspd2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
du_out_rgb: endpoint {
};
};
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
remote-endpoint = <&dw_hdmi0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds0: endpoint {
remote-endpoint = <&lvds0_in>;
};
};
};
};
lvds0: lvds@feb90000 {
compatible = "renesas,r8a774a1-lvds";
reg = <0 0xfeb90000 0 0x14>;
clocks = <&cpg CPG_MOD 727>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 727>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};
};
prr: chipid@fff00044 { prr: chipid@fff00044 {
compatible = "renesas,prr"; compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>; reg = <0 0xfff00044 0 4>;
...@@ -1999,6 +2474,7 @@ sensor_thermal1: sensor-thermal1 { ...@@ -1999,6 +2474,7 @@ sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 0>; thermal-sensors = <&tsc 0>;
sustainable-power = <3874>;
trips { trips {
sensor1_crit: sensor1-crit { sensor1_crit: sensor1-crit {
...@@ -2013,6 +2489,7 @@ sensor_thermal2: sensor-thermal2 { ...@@ -2013,6 +2489,7 @@ sensor_thermal2: sensor-thermal2 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 1>; thermal-sensors = <&tsc 1>;
sustainable-power = <3874>;
trips { trips {
sensor2_crit: sensor2-crit { sensor2_crit: sensor2-crit {
...@@ -2021,21 +2498,39 @@ sensor2_crit: sensor2-crit { ...@@ -2021,21 +2498,39 @@ sensor2_crit: sensor2-crit {
type = "critical"; type = "critical";
}; };
}; };
}; };
sensor_thermal3: sensor-thermal3 { sensor_thermal3: sensor-thermal3 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 2>; thermal-sensors = <&tsc 2>;
sustainable-power = <3874>;
trips { trips {
target: trip-point1 {
temperature = <100000>;
hysteresis = <1000>;
type = "passive";
};
sensor3_crit: sensor3-crit { sensor3_crit: sensor3-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps {
map0 {
trip = <&target>;
cooling-device = <&a57_0 0 2>;
contribution = <1024>;
};
map1 {
trip = <&target>;
cooling-device = <&a53_0 0 2>;
contribution = <1024>;
};
};
}; };
}; };
......
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
View file @ d7103600
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
/dts-v1/; /dts-v1/;
#include "r8a774c0.dtsi" #include "r8a774c0.dtsi"
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/display/tda998x.h>
/ { / {
model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
...@@ -15,13 +16,25 @@ / { ...@@ -15,13 +16,25 @@ / {
aliases { aliases {
serial0 = &scif2; serial0 = &scif2;
serial1 = &hscif2;
}; };
chosen { chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&tda19988_out>;
};
};
};
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
...@@ -52,6 +65,23 @@ memory@48000000 { ...@@ -52,6 +65,23 @@ memory@48000000 {
reg = <0x0 0x48000000 0x0 0x78000000>; reg = <0x0 0x48000000 0x0 0x78000000>;
}; };
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "CAT874 HDMI sound";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sndcpu>;
simple-audio-card,frame-master = <&sndcpu>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&tda19988>;
};
};
vcc_sdhi0: regulator-vcc-sdhi0 { vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
...@@ -74,6 +104,46 @@ vccq_sdhi0: regulator-vccq-sdhi0 { ...@@ -74,6 +104,46 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
states = <3300000 1 states = <3300000 1
1800000 0>; 1800000 0>;
}; };
wlan_en_reg: fixedregulator {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <70000>;
gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x13_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
endpoint {
remote-endpoint = <&tda19988_in>;
};
};
};
}; };
&ehci0 { &ehci0 {
...@@ -85,6 +155,81 @@ &extal_clk { ...@@ -85,6 +155,81 @@ &extal_clk {
clock-frequency = <48000000>; clock-frequency = <48000000>;
}; };
&hscif2 {
pinctrl-0 = <&hscif2_pins>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "ti,wl1837-st";
enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
hd3ss3220@47 {
compatible = "ti,hd3ss3220";
reg = <0x47>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
hd3ss3220_ep: endpoint {
remote-endpoint = <&usb3_role_switch>;
};
};
};
};
};
tda19988: tda19988@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
video-ports = <0x234501>;
#sound-dai-cells = <0>;
audio-ports = <TDA998x_I2S 0x03>;
clocks = <&rcar_sound 1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tda19988_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
tda19988_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
};
&i2c1 { &i2c1 {
pinctrl-0 = <&i2c1_pins>; pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -98,6 +243,13 @@ rtc@32 { ...@@ -98,6 +243,13 @@ rtc@32 {
}; };
}; };
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 { &ohci0 {
dr_mode = "host"; dr_mode = "host";
status = "okay"; status = "okay";
...@@ -113,11 +265,22 @@ &pciec0 { ...@@ -113,11 +265,22 @@ &pciec0 {
}; };
&pfc { &pfc {
du_pins: du {
groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
"du_clk_in_0";
function = "du";
};
i2c1_pins: i2c1 { i2c1_pins: i2c1 {
groups = "i2c1_b"; groups = "i2c1_b";
function = "i2c1"; function = "i2c1";
}; };
hscif2_pins: hscif2 {
groups = "hscif2_data_a", "hscif2_ctrl_a";
function = "hscif2";
};
scif2_pins: scif2 { scif2_pins: scif2 {
groups = "scif2_data_a"; groups = "scif2_data_a";
function = "scif2"; function = "scif2";
...@@ -134,6 +297,47 @@ sdhi0_pins_uhs: sd0_uhs { ...@@ -134,6 +297,47 @@ sdhi0_pins_uhs: sd0_uhs {
function = "sdhi0"; function = "sdhi0";
power-source = <1800>; power-source = <1800>;
}; };
sdhi3_pins: sd3 {
groups = "sdhi3_data4", "sdhi3_ctrl";
function = "sdhi3";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data";
function = "ssi";
};
sound_clk_pins: sound_clk {
groups = "audio_clkout1_a";
function = "audio_clk";
};
usb30_pins: usb30 {
groups = "usb30", "usb30_id";
function = "usb30";
};
};
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <11289600>;
status = "okay";
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src0 &dvc0>;
};
};
}; };
&rwdt { &rwdt {
...@@ -162,7 +366,47 @@ &sdhi0 { ...@@ -162,7 +366,47 @@ &sdhi0 {
status = "okay"; status = "okay";
}; };
&sdhi3 {
status = "okay";
pinctrl-0 = <&sdhi3_pins>;
pinctrl-names = "default";
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
non-removable;
cap-power-off-card;
keep-power-in-suspend;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
};
&usb2_phy0 { &usb2_phy0 {
renesas,no-otg-pins; renesas,no-otg-pins;
status = "okay"; status = "okay";
}; };
&usb3_peri0 {
companion = <&xhci0>;
status = "okay";
usb-role-switch;
port {
usb3_role_switch: endpoint {
remote-endpoint = <&hd3ss3220_ep>;
};
};
};
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
status = "okay";
};
arch/arm64/boot/dts/renesas/r8a774c0.dtsi
View file @ d7103600
...@@ -70,7 +70,7 @@ cpus { ...@@ -70,7 +70,7 @@ cpus {
#size-cells = <0>; #size-cells = <0>;
a53_0: cpu@0 { a53_0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8"; compatible = "arm,cortex-a53";
reg = <0>; reg = <0>;
device_type = "cpu"; device_type = "cpu";
power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
...@@ -81,7 +81,7 @@ a53_0: cpu@0 { ...@@ -81,7 +81,7 @@ a53_0: cpu@0 {
}; };
a53_1: cpu@1 { a53_1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8"; compatible = "arm,cortex-a53";
reg = <1>; reg = <1>;
device_type = "cpu"; device_type = "cpu";
power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
...@@ -684,7 +684,7 @@ hsusb: usb@e6590000 { ...@@ -684,7 +684,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>; resets = <&cpg 704>, <&cpg 703>;
...@@ -1580,7 +1580,7 @@ ohci0: usb@ee080000 { ...@@ -1580,7 +1580,7 @@ ohci0: usb@ee080000 {
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
...@@ -1592,7 +1592,7 @@ ehci0: usb@ee080100 { ...@@ -1592,7 +1592,7 @@ ehci0: usb@ee080100 {
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
...@@ -1608,7 +1608,7 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -1608,7 +1608,7 @@ usb2_phy0: usb-phy@ee080200 {
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
......
arch/arm64/boot/dts/renesas/r8a7795.dtsi
View file @ d7103600
...@@ -155,6 +155,7 @@ a57_0: cpu@0 { ...@@ -155,6 +155,7 @@ a57_0: cpu@0 {
power-domains = <&sysc R8A7795_PD_CA57_CPU0>; power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>; next-level-cache = <&L2_CA57>;
enable-method = "psci"; enable-method = "psci";
dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>; operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>; capacity-dmips-mhz = <1024>;
...@@ -207,6 +208,8 @@ a53_0: cpu@100 { ...@@ -207,6 +208,8 @@ a53_0: cpu@100 {
power-domains = <&sysc R8A7795_PD_CA53_CPU0>; power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>; operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>; capacity-dmips-mhz = <535>;
...@@ -812,7 +815,7 @@ hsusb: usb@e6590000 { ...@@ -812,7 +815,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>; resets = <&cpg 704>, <&cpg 703>;
...@@ -829,7 +832,7 @@ hsusb3: usb@e659c000 { ...@@ -829,7 +832,7 @@ hsusb3: usb@e659c000 {
<&usb_dmac3 0>, <&usb_dmac3 1>; <&usb_dmac3 0>, <&usb_dmac3 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy3>; phys = <&usb2_phy3 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 705>, <&cpg 700>; resets = <&cpg 705>, <&cpg 700>;
...@@ -1450,6 +1453,17 @@ scif5: serial@e6f30000 { ...@@ -1450,6 +1453,17 @@ scif5: serial@e6f30000 {
status = "disabled"; status = "disabled";
}; };
tpu: pwm@e6e80000 {
compatible = "renesas,tpu-r8a7795", "renesas,tpu";
reg = <0 0xe6e80000 0 0x148>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 304>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 304>;
#pwm-cells = <3>;
status = "disabled";
};
msiof0: spi@e6e90000 { msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a7795", compatible = "renesas,msiof-r8a7795",
"renesas,rcar-gen3-msiof"; "renesas,rcar-gen3-msiof";
...@@ -2405,7 +2419,7 @@ ohci0: usb@ee080000 { ...@@ -2405,7 +2419,7 @@ ohci0: usb@ee080000 {
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
...@@ -2417,7 +2431,7 @@ ohci1: usb@ee0a0000 { ...@@ -2417,7 +2431,7 @@ ohci1: usb@ee0a0000 {
reg = <0 0xee0a0000 0 0x100>; reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
...@@ -2429,7 +2443,7 @@ ohci2: usb@ee0c0000 { ...@@ -2429,7 +2443,7 @@ ohci2: usb@ee0c0000 {
reg = <0 0xee0c0000 0 0x100>; reg = <0 0xee0c0000 0 0x100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 701>; clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>; phys = <&usb2_phy2 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 701>; resets = <&cpg 701>;
...@@ -2441,7 +2455,7 @@ ohci3: usb@ee0e0000 { ...@@ -2441,7 +2455,7 @@ ohci3: usb@ee0e0000 {
reg = <0 0xee0e0000 0 0x100>; reg = <0 0xee0e0000 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>; phys = <&usb2_phy3 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 700>, <&cpg 705>; resets = <&cpg 700>, <&cpg 705>;
...@@ -2453,7 +2467,7 @@ ehci0: usb@ee080100 { ...@@ -2453,7 +2467,7 @@ ehci0: usb@ee080100 {
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
...@@ -2466,7 +2480,7 @@ ehci1: usb@ee0a0100 { ...@@ -2466,7 +2480,7 @@ ehci1: usb@ee0a0100 {
reg = <0 0xee0a0100 0 0x100>; reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci1>; companion = <&ohci1>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
...@@ -2479,7 +2493,7 @@ ehci2: usb@ee0c0100 { ...@@ -2479,7 +2493,7 @@ ehci2: usb@ee0c0100 {
reg = <0 0xee0c0100 0 0x100>; reg = <0 0xee0c0100 0 0x100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 701>; clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>; phys = <&usb2_phy2 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci2>; companion = <&ohci2>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
...@@ -2492,7 +2506,7 @@ ehci3: usb@ee0e0100 { ...@@ -2492,7 +2506,7 @@ ehci3: usb@ee0e0100 {
reg = <0 0xee0e0100 0 0x100>; reg = <0 0xee0e0100 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>; phys = <&usb2_phy3 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci3>; companion = <&ohci3>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
...@@ -2508,7 +2522,7 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -2508,7 +2522,7 @@ usb2_phy0: usb-phy@ee080200 {
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2519,7 +2533,7 @@ usb2_phy1: usb-phy@ee0a0200 { ...@@ -2519,7 +2533,7 @@ usb2_phy1: usb-phy@ee0a0200 {
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2530,7 +2544,7 @@ usb2_phy2: usb-phy@ee0c0200 { ...@@ -2530,7 +2544,7 @@ usb2_phy2: usb-phy@ee0c0200 {
clocks = <&cpg CPG_MOD 701>; clocks = <&cpg CPG_MOD 701>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 701>; resets = <&cpg 701>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2542,7 +2556,7 @@ usb2_phy3: usb-phy@ee0e0200 { ...@@ -2542,7 +2556,7 @@ usb2_phy3: usb-phy@ee0e0200 {
clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 700>, <&cpg 705>; resets = <&cpg 700>, <&cpg 705>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -3168,58 +3182,30 @@ sensor_thermal1: sensor-thermal1 { ...@@ -3168,58 +3182,30 @@ sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 0>; thermal-sensors = <&tsc 0>;
sustainable-power = <6313>;
trips { trips {
sensor1_passive: sensor1-passive {
temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
sensor1_crit: sensor1-crit { sensor1_crit: sensor1-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps {
map0 {
trip = <&sensor1_passive>;
cooling-device = <&a57_0 4 4>,
<&a57_1 4 4>,
<&a57_2 4 4>,
<&a57_3 4 4>;
};
};
}; };
sensor_thermal2: sensor-thermal2 { sensor_thermal2: sensor-thermal2 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 1>; thermal-sensors = <&tsc 1>;
sustainable-power = <6313>;
trips { trips {
sensor2_passive: sensor2-passive {
temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
sensor2_crit: sensor2-crit { sensor2_crit: sensor2-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps {
map0 {
trip = <&sensor2_passive>;
cooling-device = <&a57_0 4 4>,
<&a57_1 4 4>,
<&a57_2 4 4>,
<&a57_3 4 4>;
};
};
}; };
sensor_thermal3: sensor-thermal3 { sensor_thermal3: sensor-thermal3 {
...@@ -3228,11 +3214,12 @@ sensor_thermal3: sensor-thermal3 { ...@@ -3228,11 +3214,12 @@ sensor_thermal3: sensor-thermal3 {
thermal-sensors = <&tsc 2>; thermal-sensors = <&tsc 2>;
trips { trips {
sensor3_passive: sensor3-passive { target: trip-point1 {
temperature = <95000>; temperature = <100000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "passive"; type = "passive";
}; };
sensor3_crit: sensor3-crit { sensor3_crit: sensor3-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
...@@ -3242,11 +3229,15 @@ sensor3_crit: sensor3-crit { ...@@ -3242,11 +3229,15 @@ sensor3_crit: sensor3-crit {
cooling-maps { cooling-maps {
map0 { map0 {
trip = <&sensor3_passive>; trip = <&target>;
cooling-device = <&a57_0 4 4>, cooling-device = <&a57_0 2 4>;
<&a57_1 4 4>, contribution = <1024>;
<&a57_2 4 4>, };
<&a57_3 4 4>;
map1 {
trip = <&target>;
cooling-device = <&a53_0 0 2>;
contribution = <1024>;
}; };
}; };
}; };
......
arch/arm64/boot/dts/renesas/r8a7796.dtsi
View file @ d7103600
...@@ -160,6 +160,7 @@ a57_0: cpu@0 { ...@@ -160,6 +160,7 @@ a57_0: cpu@0 {
power-domains = <&sysc R8A7796_PD_CA57_CPU0>; power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>; next-level-cache = <&L2_CA57>;
enable-method = "psci"; enable-method = "psci";
dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>; operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>; capacity-dmips-mhz = <1024>;
...@@ -186,6 +187,8 @@ a53_0: cpu@100 { ...@@ -186,6 +187,8 @@ a53_0: cpu@100 {
power-domains = <&sysc R8A7796_PD_CA53_CPU0>; power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>; operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>; capacity-dmips-mhz = <535>;
...@@ -783,7 +786,7 @@ hsusb: usb@e6590000 { ...@@ -783,7 +786,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>; resets = <&cpg 704>, <&cpg 703>;
...@@ -1319,6 +1322,17 @@ scif5: serial@e6f30000 { ...@@ -1319,6 +1322,17 @@ scif5: serial@e6f30000 {
status = "disabled"; status = "disabled";
}; };
tpu: pwm@e6e80000 {
compatible = "renesas,tpu-r8a7796", "renesas,tpu";
reg = <0 0xe6e80000 0 0x148>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 304>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 304>;
#pwm-cells = <3>;
status = "disabled";
};
msiof0: spi@e6e90000 { msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a7796", compatible = "renesas,msiof-r8a7796",
"renesas,rcar-gen3-msiof"; "renesas,rcar-gen3-msiof";
...@@ -2275,7 +2289,7 @@ ohci0: usb@ee080000 { ...@@ -2275,7 +2289,7 @@ ohci0: usb@ee080000 {
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
...@@ -2287,7 +2301,7 @@ ohci1: usb@ee0a0000 { ...@@ -2287,7 +2301,7 @@ ohci1: usb@ee0a0000 {
reg = <0 0xee0a0000 0 0x100>; reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
...@@ -2299,7 +2313,7 @@ ehci0: usb@ee080100 { ...@@ -2299,7 +2313,7 @@ ehci0: usb@ee080100 {
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
...@@ -2312,7 +2326,7 @@ ehci1: usb@ee0a0100 { ...@@ -2312,7 +2326,7 @@ ehci1: usb@ee0a0100 {
reg = <0 0xee0a0100 0 0x100>; reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci1>; companion = <&ohci1>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
...@@ -2328,7 +2342,7 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -2328,7 +2342,7 @@ usb2_phy0: usb-phy@ee080200 {
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2339,7 +2353,7 @@ usb2_phy1: usb-phy@ee0a0200 { ...@@ -2339,7 +2353,7 @@ usb2_phy1: usb-phy@ee0a0200 {
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2814,76 +2828,61 @@ sensor_thermal1: sensor-thermal1 { ...@@ -2814,76 +2828,61 @@ sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 0>; thermal-sensors = <&tsc 0>;
sustainable-power = <3874>;
trips { trips {
sensor1_passive: sensor1-passive {
temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
sensor1_crit: sensor1-crit { sensor1_crit: sensor1-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps {
map0 {
trip = <&sensor1_passive>;
cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
};
};
}; };
sensor_thermal2: sensor-thermal2 { sensor_thermal2: sensor-thermal2 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 1>; thermal-sensors = <&tsc 1>;
sustainable-power = <3874>;
trips { trips {
sensor2_passive: sensor2-passive {
temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
sensor2_crit: sensor2-crit { sensor2_crit: sensor2-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps {
map0 {
trip = <&sensor2_passive>;
cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
};
};
}; };
sensor_thermal3: sensor-thermal3 { sensor_thermal3: sensor-thermal3 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 2>; thermal-sensors = <&tsc 2>;
sustainable-power = <3874>;
trips { trips {
sensor3_passive: sensor3-passive { target: trip-point1 {
temperature = <95000>; temperature = <100000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "passive"; type = "passive";
}; };
sensor3_crit: sensor3-crit { sensor3_crit: sensor3-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps { cooling-maps {
map0 { map0 {
trip = <&sensor3_passive>; trip = <&target>;
cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; cooling-device = <&a57_0 2 4>;
contribution = <1024>;
};
map1 {
trip = <&target>;
cooling-device = <&a53_0 0 2>;
contribution = <1024>;
}; };
}; };
}; };
......
arch/arm64/boot/dts/renesas/r8a77965.dtsi
View file @ d7103600
...@@ -111,6 +111,8 @@ a57_0: cpu@0 { ...@@ -111,6 +111,8 @@ a57_0: cpu@0 {
power-domains = <&sysc R8A77965_PD_CA57_CPU0>; power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>; next-level-cache = <&L2_CA57>;
enable-method = "psci"; enable-method = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
operating-points-v2 = <&cluster0_opp>; operating-points-v2 = <&cluster0_opp>;
}; };
...@@ -667,7 +669,7 @@ hsusb: usb@e6590000 { ...@@ -667,7 +669,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>; resets = <&cpg 704>, <&cpg 703>;
...@@ -1195,6 +1197,17 @@ scif5: serial@e6f30000 { ...@@ -1195,6 +1197,17 @@ scif5: serial@e6f30000 {
status = "disabled"; status = "disabled";
}; };
tpu: pwm@e6e80000 {
compatible = "renesas,tpu-r8a77965", "renesas,tpu";
reg = <0 0xe6e80000 0 0x148>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 304>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 304>;
#pwm-cells = <3>;
status = "disabled";
};
msiof0: spi@e6e90000 { msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a77965", compatible = "renesas,msiof-r8a77965",
"renesas,rcar-gen3-msiof"; "renesas,rcar-gen3-msiof";
...@@ -2015,7 +2028,7 @@ ohci0: usb@ee080000 { ...@@ -2015,7 +2028,7 @@ ohci0: usb@ee080000 {
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
...@@ -2027,7 +2040,7 @@ ohci1: usb@ee0a0000 { ...@@ -2027,7 +2040,7 @@ ohci1: usb@ee0a0000 {
reg = <0 0xee0a0000 0 0x100>; reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
...@@ -2039,7 +2052,7 @@ ehci0: usb@ee080100 { ...@@ -2039,7 +2052,7 @@ ehci0: usb@ee080100 {
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
...@@ -2052,7 +2065,7 @@ ehci1: usb@ee0a0100 { ...@@ -2052,7 +2065,7 @@ ehci1: usb@ee0a0100 {
reg = <0 0xee0a0100 0 0x100>; reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>; phys = <&usb2_phy1 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci1>; companion = <&ohci1>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
...@@ -2068,7 +2081,7 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -2068,7 +2081,7 @@ usb2_phy0: usb-phy@ee080200 {
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2079,7 +2092,7 @@ usb2_phy1: usb-phy@ee0a0200 { ...@@ -2079,7 +2092,7 @@ usb2_phy1: usb-phy@ee0a0200 {
clocks = <&cpg CPG_MOD 702>; clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 702>; resets = <&cpg 702>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -2519,6 +2532,7 @@ sensor_thermal1: sensor-thermal1 { ...@@ -2519,6 +2532,7 @@ sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 0>; thermal-sensors = <&tsc 0>;
sustainable-power = <2439>;
trips { trips {
sensor1_crit: sensor1-crit { sensor1_crit: sensor1-crit {
...@@ -2533,6 +2547,7 @@ sensor_thermal2: sensor-thermal2 { ...@@ -2533,6 +2547,7 @@ sensor_thermal2: sensor-thermal2 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 1>; thermal-sensors = <&tsc 1>;
sustainable-power = <2439>;
trips { trips {
sensor2_crit: sensor2-crit { sensor2_crit: sensor2-crit {
...@@ -2547,14 +2562,30 @@ sensor_thermal3: sensor-thermal3 { ...@@ -2547,14 +2562,30 @@ sensor_thermal3: sensor-thermal3 {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <1000>;
thermal-sensors = <&tsc 2>; thermal-sensors = <&tsc 2>;
sustainable-power = <2439>;
trips { trips {
target: trip-point1 {
/* miliCelsius */
temperature = <100000>;
hysteresis = <1000>;
type = "passive";
};
sensor3_crit: sensor3-crit { sensor3_crit: sensor3-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <1000>; hysteresis = <1000>;
type = "critical"; type = "critical";
}; };
}; };
cooling-maps {
map0 {
trip = <&target>;
cooling-device = <&a57_0 2 4>;
contribution = <1024>;
};
};
}; };
}; };
......
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
View file @ d7103600
...@@ -19,7 +19,7 @@ aliases { ...@@ -19,7 +19,7 @@ aliases {
}; };
chosen { chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
......
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
View file @ d7103600
...@@ -19,7 +19,7 @@ aliases { ...@@ -19,7 +19,7 @@ aliases {
}; };
chosen { chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
...@@ -262,7 +262,6 @@ &audio_clk_a { ...@@ -262,7 +262,6 @@ &audio_clk_a {
&avb { &avb {
pinctrl-0 = <&avb_pins>; pinctrl-0 = <&avb_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>; phy-handle = <&phy0>;
status = "okay"; status = "okay";
......
arch/arm64/boot/dts/renesas/r8a77990.dtsi
View file @ d7103600
...@@ -84,9 +84,11 @@ a53_0: cpu@0 { ...@@ -84,9 +84,11 @@ a53_0: cpu@0 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0>; reg = <0>;
device_type = "cpu"; device_type = "cpu";
#cooling-cells = <2>;
power-domains = <&sysc R8A77990_PD_CA53_CPU0>; power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>; next-level-cache = <&L2_CA53>;
enable-method = "psci"; enable-method = "psci";
dynamic-power-coefficient = <277>;
clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>; operating-points-v2 = <&cluster1_opp>;
}; };
...@@ -630,7 +632,7 @@ hsusb: usb@e6590000 { ...@@ -630,7 +632,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>; resets = <&cpg 704>, <&cpg 703>;
...@@ -1537,7 +1539,7 @@ ohci0: usb@ee080000 { ...@@ -1537,7 +1539,7 @@ ohci0: usb@ee080000 {
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
...@@ -1549,7 +1551,7 @@ ehci0: usb@ee080100 { ...@@ -1549,7 +1551,7 @@ ehci0: usb@ee080100 {
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
...@@ -1565,7 +1567,7 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -1565,7 +1567,7 @@ usb2_phy0: usb-phy@ee080200 {
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -1758,7 +1760,7 @@ csi40vin5: endpoint@1 { ...@@ -1758,7 +1760,7 @@ csi40vin5: endpoint@1 {
du: display@feb00000 { du: display@feb00000 {
compatible = "renesas,du-r8a77990"; compatible = "renesas,du-r8a77990";
reg = <0 0xfeb00000 0 0x80000>; reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, clocks = <&cpg CPG_MOD 724>,
...@@ -1801,6 +1803,8 @@ lvds0: lvds-encoder@feb90000 { ...@@ -1801,6 +1803,8 @@ lvds0: lvds-encoder@feb90000 {
resets = <&cpg 727>; resets = <&cpg 727>;
status = "disabled"; status = "disabled";
renesas,companion = <&lvds1>;
ports { ports {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -1856,11 +1860,18 @@ prr: chipid@fff00044 { ...@@ -1856,11 +1860,18 @@ prr: chipid@fff00044 {
thermal-zones { thermal-zones {
cpu-thermal { cpu-thermal {
polling-delay-passive = <250>; polling-delay-passive = <250>;
polling-delay = <1000>; polling-delay = <0>;
thermal-sensors = <&thermal>; thermal-sensors = <&thermal 0>;
sustainable-power = <717>;
trips { trips {
cpu-crit { target: trip-point1 {
temperature = <100000>;
hysteresis = <2000>;
type = "passive";
};
sensor1_crit: sensor1-crit {
temperature = <120000>; temperature = <120000>;
hysteresis = <2000>; hysteresis = <2000>;
type = "critical"; type = "critical";
...@@ -1868,6 +1879,11 @@ cpu-crit { ...@@ -1868,6 +1879,11 @@ cpu-crit {
}; };
cooling-maps { cooling-maps {
map0 {
trip = <&target>;
cooling-device = <&a53_0 0 2>;
contribution = <1024>;
};
}; };
}; };
}; };
......
arch/arm64/boot/dts/renesas/r8a77995-draak.dts
View file @ d7103600
...@@ -20,7 +20,7 @@ aliases { ...@@ -20,7 +20,7 @@ aliases {
}; };
chosen { chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
...@@ -511,12 +511,7 @@ &vin4 { ...@@ -511,12 +511,7 @@ &vin4 {
status = "okay"; status = "okay";
ports { ports {
#address-cells = <1>; port {
#size-cells = <0>;
port@0 {
reg = <0>;
vin4_in: endpoint { vin4_in: endpoint {
remote-endpoint = <&adv7180_out>; remote-endpoint = <&adv7180_out>;
}; };
......
arch/arm64/boot/dts/renesas/r8a77995.dtsi
View file @ d7103600
...@@ -354,7 +354,7 @@ hsusb: usb@e6590000 { ...@@ -354,7 +354,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>; <&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3"; dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>; renesas,buswait = <11>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 3>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>; resets = <&cpg 704>, <&cpg 703>;
...@@ -875,7 +875,7 @@ ohci0: usb@ee080000 { ...@@ -875,7 +875,7 @@ ohci0: usb@ee080000 {
reg = <0 0xee080000 0 0x100>; reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 1>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
...@@ -887,7 +887,7 @@ ehci0: usb@ee080100 { ...@@ -887,7 +887,7 @@ ehci0: usb@ee080100 {
reg = <0 0xee080100 0 0x100>; reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>; phys = <&usb2_phy0 2>;
phy-names = "usb"; phy-names = "usb";
companion = <&ohci0>; companion = <&ohci0>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
...@@ -903,7 +903,7 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -903,7 +903,7 @@ usb2_phy0: usb-phy@ee080200 {
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>; resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>; #phy-cells = <1>;
status = "disabled"; status = "disabled";
}; };
...@@ -1038,6 +1038,8 @@ lvds0: lvds-encoder@feb90000 { ...@@ -1038,6 +1038,8 @@ lvds0: lvds-encoder@feb90000 {
resets = <&cpg 727>; resets = <&cpg 727>;
status = "disabled"; status = "disabled";
renesas,companion = <&lvds1>;
ports { ports {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
arch/arm64/boot/dts/renesas/salvator-common.dtsi
View file @ d7103600
...@@ -39,7 +39,7 @@ aliases { ...@@ -39,7 +39,7 @@ aliases {
}; };
chosen { chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
......
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
View file @ d7103600
...@@ -38,6 +38,18 @@ snd_vcc5v: regulator-snd_vcc5v { ...@@ -38,6 +38,18 @@ snd_vcc5v: regulator-snd_vcc5v {
regulator-min-microvolt = <5000000>; regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
}; };
wlan_en: regulator-wlan_en {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
}; };
&can0 { &can0 {
...@@ -88,6 +100,13 @@ audio_out_off { ...@@ -88,6 +100,13 @@ audio_out_off {
line-name = "Audio_Out_OFF"; line-name = "Audio_Out_OFF";
}; };
sd-wifi-mux {
gpio-hog;
gpios = <5 GPIO_ACTIVE_HIGH>;
output-low; /* Connect WL1837 */
line-name = "SD WiFi mux";
};
hub_pwen { hub_pwen {
gpio-hog; gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>; gpios = <6 GPIO_ACTIVE_HIGH>;
...@@ -254,6 +273,12 @@ scif1_pins: scif1 { ...@@ -254,6 +273,12 @@ scif1_pins: scif1 {
function = "scif1"; function = "scif1";
}; };
sdhi3_pins: sdhi3 {
groups = "sdhi3_data4", "sdhi3_ctrl";
function = "sdhi3";
power-source = <3300>;
};
usb0_pins: usb0 { usb0_pins: usb0 {
groups = "usb0"; groups = "usb0";
function = "usb0"; function = "usb0";
...@@ -273,6 +298,30 @@ &scif1 { ...@@ -273,6 +298,30 @@ &scif1 {
status = "okay"; status = "okay";
}; };
&sdhi3 {
pinctrl-0 = <&sdhi3_pins>;
pinctrl-names = "default";
vmmc-supply = <&wlan_en>;
vqmmc-supply = <&wlan_en>;
bus-width = <4>;
no-1-8-v;
non-removable;
cap-power-off-card;
keep-power-in-suspend;
max-frequency = <26000000>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio1>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
};
};
&usb2_phy0 { &usb2_phy0 {
pinctrl-0 = <&usb0_pins>; pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
......
arch/arm64/boot/dts/renesas/ulcb.dtsi
View file @ d7103600
...@@ -26,7 +26,7 @@ aliases { ...@@ -26,7 +26,7 @@ aliases {
}; };
chosen { chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7