staging: comedi: dt2811: remove disabled interrupt support code

The interrupt support in this driver is incomplete due to the missing
comedi functions to support async commands.

Since the interrupt code is already disable just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/dt2811.c

@@ -42,7 +42,6 @@ Configuration options:
 */
 
 #include <linux/module.h>
-#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 static const struct comedi_lrange range_dt2811_pgh_ai_5_unipolar = {
@@ -227,33 +226,6 @@ static const struct comedi_lrange *dac_range_types[] = {
 
 #define DT2811_TIMEOUT 5
 
-#if 0
-static irqreturn_t dt2811_interrupt(int irq, void *d)
-{
-	int lo, hi;
-	int data;
-	struct comedi_device *dev = d;
-	struct dt2811_private *devpriv = dev->private;
-
-	if (!dev->attached) {
-		comedi_error(dev, "spurious interrupt");
-		return IRQ_HANDLED;
-	}
-
-	lo = inb(dev->iobase + DT2811_ADDATLO);
-	hi = inb(dev->iobase + DT2811_ADDATHI);
-
-	data = lo + (hi << 8);
-
-	if (!(--devpriv->ntrig)) {
-		/* how to turn off acquisition */
-		s->async->events |= COMEDI_SB_EOA;
-	}
-	comedi_event(dev, s);
-	return IRQ_HANDLED;
-}
-#endif
-
 static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
@@ -357,10 +329,7 @@ static int dt2811_do_insn_bits(struct comedi_device *dev,
 */
 static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	/* int i, irq; */
-	/* unsigned long irqs; */
-	/* long flags; */
-
+	/* int i; */
 	const struct dt2811_board *board = comedi_board(dev);
 	struct dt2811_private *devpriv;
 	int ret;
@@ -377,45 +346,6 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	i = inb(dev->iobase + DT2811_ADDATHI);
 #endif
 
-#if 0
-	irq = it->options[1];
-	if (irq < 0) {
-		save_flags(flags);
-		sti();
-		irqs = probe_irq_on();
-
-		outb(DT2811_CLRERROR | DT2811_INTENB,
-		     dev->iobase + DT2811_ADCSR);
-		outb(0, dev->iobase + DT2811_ADGCR);
-
-		udelay(100);
-
-		irq = probe_irq_off(irqs);
-		restore_flags(flags);
-
-		/*outb(DT2811_CLRERROR|DT2811_INTENB,
-			dev->iobase+DT2811_ADCSR);*/
-
-		if (inb(dev->iobase + DT2811_ADCSR) & DT2811_ADERROR)
-			printk(KERN_ERR "error probing irq (bad)\n");
-		dev->irq = 0;
-		if (irq > 0) {
-			i = inb(dev->iobase + DT2811_ADDATLO);
-			i = inb(dev->iobase + DT2811_ADDATHI);
-			printk(KERN_INFO "(irq = %d)\n", irq);
-			ret = request_irq(irq, dt2811_interrupt, 0,
-					  dev->board_name, dev);
-			if (ret < 0)
-				return -EIO;
-			dev->irq = irq;
-		} else if (irq == 0) {
-			printk(KERN_INFO "(no irq)\n");
-		} else {
-			printk(KERN_ERR "( multiple irq's -- this is bad! )\n");
-		}
-	}
-#endif
-
 	ret = comedi_alloc_subdevices(dev, 4);
 	if (ret)
 		return ret;