Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)
  Blackfin: fix dma-mapping build errors
  Blackfin: hook up new perf_counter_open syscall
  Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction)
  Blackfin: fix early crash when booting on wrong cpu
  Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS
  Blackfin: drop unused ISP1760 port1_disable from board resources
  Blackfin: bf526-ezbrd: handle different SDRAM chips
  Blackfin: fix typo in TRAS define in mem_init.h header
  Blackfin: unify memory map headers
  Blackfin: stick the CPU name into boot image name
  Blackfin: update defconfigs
  Blackfin: decouple unrelated cache settings to get exact behavior
  Blackfin: update I-pipe patch level
  Blackfin: remove obsolete mcount support from I-pipe code
  Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline
  Blackfin: convert interrupt pipeline to irqflags
  Blackfin: allow people to select BF51x-0.1 silicon rev
  Blackfin: bf526-ezbrd: set SPI flash resources to SST device
  Blackfin: fix accidental reset in some boot modes
  Blackfin: abstract irq14 lowering in do_irq
  ...

arch/blackfin/Kconfig

@@ -274,7 +274,7 @@ config BF_REV_0_0
 
 config BF_REV_0_1
 	bool "0.1"
-	depends on (BF52x || (BF54x && !BF54xM))
+	depends on (BF51x || BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_2
 	bool "0.2"
@@ -358,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -366,6 +366,11 @@ config MEM_MT48LC32M8A2_75
 	depends on (BFIN518F_EZBRD)
 	default y
 
+config MEM_MT48H32M16LFCJ_75
+	bool
+	depends on (BFIN526_EZBRD)
+	default y
+
 source "arch/blackfin/mach-bf518/Kconfig"
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
@@ -623,7 +628,6 @@ choice
 config TICKSOURCE_GPTMR0
 	bool "Gptimer0 (SCLK domain)"
 	select BFIN_GPTIMERS
-	depends on !IPIPE
 
 config TICKSOURCE_CORETMR
 	bool "Core timer (CCLK domain)"
@@ -644,6 +648,7 @@ config CYCLES_CLOCKSOURCE
 
 config GPTMR0_CLOCKSOURCE
 	bool "Use GPTimer0 as a clocksource (higher rating)"
+	select BFIN_GPTIMERS
 	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
 
@@ -908,23 +913,41 @@ endchoice
 
 
 comment "Cache Support"
+
 config BFIN_ICACHE
 	bool "Enable ICACHE"
+	default y
+config BFIN_ICACHE_LOCK
+	bool "Enable Instruction Cache Locking"
+	depends on BFIN_ICACHE
+	default n
+config BFIN_EXTMEM_ICACHEABLE
+	bool "Enable ICACHE for external memory"
+	depends on BFIN_ICACHE
+	default y
+config BFIN_L2_ICACHEABLE
+	bool "Enable ICACHE for L2 SRAM"
+	depends on BFIN_ICACHE
+	depends on BF54x || BF561
+	default n
+
 config BFIN_DCACHE
 	bool "Enable DCACHE"
+	default y
 config BFIN_DCACHE_BANKA
 	bool "Enable only 16k BankA DCACHE - BankB is SRAM"
 	depends on BFIN_DCACHE && !BF531
 	default n
-config BFIN_ICACHE_LOCK
-	bool "Enable Instruction Cache Locking"
-
-choice
-	prompt "External memory cache policy"
+config BFIN_EXTMEM_DCACHEABLE
+	bool "Enable DCACHE for external memory"
 	depends on BFIN_DCACHE
-	default BFIN_WB if !SMP
-	default BFIN_WT if SMP
-config BFIN_WB
+	default y
+choice
+	prompt "External memory DCACHE policy"
+	depends on BFIN_EXTMEM_DCACHEABLE
+	default BFIN_EXTMEM_WRITEBACK if !SMP
+	default BFIN_EXTMEM_WRITETHROUGH if SMP
+config BFIN_EXTMEM_WRITEBACK
 	bool "Write back"
 	depends on !SMP
 	help
@@ -942,7 +965,7 @@ config BFIN_WB
 	  If you are unsure of the options and you want to be safe,
 	  then go with Write Through.
 
-config BFIN_WT
+config BFIN_EXTMEM_WRITETHROUGH
 	bool "Write through"
 	help
 	  Write Back Policy:
@@ -961,23 +984,26 @@ config BFIN_WT
 
 endchoice
 
+config BFIN_L2_DCACHEABLE
+	bool "Enable DCACHE for L2 SRAM"
+	depends on BFIN_DCACHE
+	depends on BF54x || BF561
+	default n
 choice
-	prompt "L2 SRAM cache policy"
-	depends on (BF54x || BF561)
-	default BFIN_L2_WT
-config BFIN_L2_WB
+	prompt "L2 SRAM DCACHE policy"
+	depends on BFIN_L2_DCACHEABLE
+	default BFIN_L2_WRITEBACK
+config BFIN_L2_WRITEBACK
 	bool "Write back"
 	depends on !SMP
 
-config BFIN_L2_WT
+config BFIN_L2_WRITETHROUGH
 	bool "Write through"
 	depends on !SMP
-
-config BFIN_L2_NOT_CACHED
-	bool "Not cached"
-
 endchoice
 
+
+comment "Memory Protection Unit"
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n

arch/blackfin/boot/Makefile

@@ -13,7 +13,7 @@ extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
                    -d $< $@
 

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -326,11 +326,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -413,11 +419,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -916,7 +922,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SDHCI is not set
 CONFIG_SDH_BFIN=m
 CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1147,7 +1153,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -331,16 +331,18 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_MPU is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
 
 #
-# Asynchonous Memory Configuration
+# Memory Protection Unit
 #
+# CONFIG_MPU is not set
 
 #
 # EBIU_AMGCTL Global Control
@@ -418,11 +420,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1424,7 +1426,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -331,11 +331,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -418,11 +424,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1505,7 +1511,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -289,15 +289,24 @@ CONFIG_BFIN_GPTIMERS=m
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
 
+#
+# Cache Support
+#
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -391,11 +400,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1052,7 +1061,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -293,11 +293,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -391,11 +397,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1216,7 +1222,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -300,11 +300,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -399,11 +405,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1269,7 +1275,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -311,11 +311,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -398,11 +404,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1203,7 +1209,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -366,14 +366,19 @@ CONFIG_DMA_UNCACHED_2M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_WB is not set
-CONFIG_BFIN_L2_WT=y
-# CONFIG_BFIN_L2_NOT_CACHED is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -459,11 +464,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1606,7 +1611,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -331,14 +331,19 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_WB is not set
-CONFIG_BFIN_L2_WT=y
-# CONFIG_BFIN_L2_NOT_CACHED is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -425,11 +430,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1044,7 +1049,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/BlackStamp_defconfig

@@ -285,11 +285,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/CM-BF527_defconfig

@@ -329,11 +329,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -417,11 +423,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1246,7 +1252,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set

arch/blackfin/configs/CM-BF533_defconfig

@@ -262,12 +262,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -353,10 +358,10 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -873,7 +878,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y

arch/blackfin/configs/CM-BF537E_defconfig

@@ -297,11 +297,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -383,11 +389,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -861,7 +867,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 

arch/blackfin/configs/CM-BF537U_defconfig

@@ -270,12 +270,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -361,10 +366,10 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -901,7 +906,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y

arch/blackfin/configs/CM-BF548_defconfig

@@ -333,12 +333,19 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -428,11 +435,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1334,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y

arch/blackfin/configs/CM-BF561_defconfig

@@ -308,12 +308,19 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -395,11 +402,11 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -837,7 +844,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y

arch/blackfin/configs/H8606_defconfig

@@ -258,12 +258,18 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_ICACHE_LOCK=y
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration

arch/blackfin/configs/PNAV-10_defconfig

@@ -295,11 +295,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -382,11 +388,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y

arch/blackfin/configs/SRV1_defconfig

@@ -279,12 +279,18 @@ CONFIG_DMA_UNCACHED_2M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration

arch/blackfin/configs/TCM-BF537_defconfig

@@ -287,11 +287,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -709,7 +715,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set

arch/blackfin/include/asm/blackfin.h

@@ -86,6 +86,7 @@ static inline void CSYNC(void)
 
 #endif /* __ASSEMBLY__ */
 
+#include <asm/mem_map.h>
 #include <mach/blackfin.h>
 #include <asm/bfin-global.h>
 

arch/blackfin/include/asm/cache.h

@@ -35,10 +35,10 @@
 
 #if defined(CONFIG_SMP) && \
     !defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHE)
+# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
 # define __ARCH_SYNC_CORE_ICACHE
 # endif
-# if defined(CONFIG_BFIN_DCACHE)
+# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
 # define __ARCH_SYNC_CORE_DCACHE
 # endif
 #ifndef __ASSEMBLY__

arch/blackfin/include/asm/cacheflush.h

@@ -56,7 +56,7 @@ extern void blackfin_invalidate_entire_icache(void);
 
 static inline void flush_icache_range(unsigned start, unsigned end)
 {
-#if defined(CONFIG_BFIN_WB)
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 	blackfin_dcache_flush_range(start, end);
 #endif
 
@@ -87,9 +87,9 @@ do { memcpy(dst, src, len);						\
 #else
 # define invalidate_dcache_range(start,end)	do { } while (0)
 #endif
-#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB)
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 # define flush_dcache_range(start,end)		blackfin_dcache_flush_range((start), (end))
-# define flush_dcache_page(page)			blackfin_dflush_page(page_address(page))
+# define flush_dcache_page(page)		blackfin_dflush_page(page_address(page))
 #else
 # define flush_dcache_range(start,end)		do { } while (0)
 # define flush_dcache_page(page)		do { } while (0)
@@ -100,7 +100,7 @@ extern unsigned long reserved_mem_icache_on;
 
 static inline int bfin_addr_dcacheable(unsigned long addr)
 {
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	if (addr < (_ramend - DMA_UNCACHED_REGION))
 		return 1;
 #endif
@@ -109,7 +109,7 @@ static inline int bfin_addr_dcacheable(unsigned long addr)
 		addr >= _ramend && addr < physical_mem_end)
 		return 1;
 
-#ifndef CONFIG_BFIN_L2_NOT_CACHED
+#ifdef CONFIG_BFIN_L2_DCACHEABLE
 	if (addr >= L2_START && addr < L2_START + L2_LENGTH)
 		return 1;
 #endif

arch/blackfin/include/asm/cplb.h

@@ -37,8 +37,6 @@
 #define L1_IMEMORY        (               CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
 #define SDRAM_INON_CHBL   (               CPLB_USER_RD | CPLB_VALID)
 
-/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/
-
 #if ANOMALY_05000158
 #define ANOMALY_05000158_WORKAROUND             0x200
 #else
@@ -47,10 +45,12 @@
 
 #define CPLB_COMMON	(CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
 
-#ifdef CONFIG_BFIN_WB         /*Write Back Policy */
+#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_COMMON)
-#else                           /*Write Through */
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+#else
+#define SDRAM_DGENERIC   (CPLB_COMMON)
 #endif
 
 #define SDRAM_DNON_CHBL  (CPLB_COMMON)
@@ -61,21 +61,23 @@
 
 #ifdef CONFIG_SMP
 #define L2_ATTR          (INITIAL_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY       (CPLB_COMMON)
-#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
+#define L2_IMEMORY       (CPLB_COMMON | PAGE_SIZE_1MB)
+#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB)
 
 #else
 #define L2_ATTR          (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY       (SDRAM_IGENERIC)
-
-# if defined(CONFIG_BFIN_L2_WB)
-# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON)
-# elif defined(CONFIG_BFIN_L2_WT)
-# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
-# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
-# define L2_DMEMORY      (CPLB_COMMON)
+# if defined(CONFIG_BFIN_L2_ICACHEABLE)
+# define L2_IMEMORY      (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# else
+# define L2_IMEMORY      (               CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# endif
+
+# if defined(CONFIG_BFIN_L2_WRITEBACK)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB)
+# elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB)
 # else
-# define L2_DMEMORY      (0)
+# define L2_DMEMORY      (CPLB_COMMON | PAGE_SIZE_1MB)
 # endif
 #endif /* CONFIG_SMP */
 

arch/blackfin/include/asm/dma-mapping.h

@@ -95,4 +95,17 @@ static inline void dma_sync_single_for_device(struct device *dev,
 					enum dma_data_direction dir)
 {
 }
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+					struct scatterlist *sg,
+					int nents, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					struct scatterlist *sg,
+					int nents, enum dma_data_direction dir)
+{
+}
+
 #endif				/* _BLACKFIN_DMA_MAPPING_H */

arch/blackfin/include/asm/ipipe.h

@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.10-00"
+#define IPIPE_ARCH_STRING     "1.11-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    10
+#define IPIPE_MINOR_NUMBER    11
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -207,7 +207,7 @@ void ipipe_init_irq_threads(void);
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#ifdef CONFIG_TICKSOURCE_CORETMR
 #define IRQ_SYSTMR		IRQ_CORETMR
 #define IRQ_PRIOTMR		IRQ_CORETMR
 #else
@@ -240,8 +240,13 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 #define ipipe_init_irq_threads()		do { } while (0)
 #define ipipe_start_irq_thread(irq, desc)	0
 
+#ifndef CONFIG_TICKSOURCE_GPTMR0
 #define IRQ_SYSTMR		IRQ_CORETMR
 #define IRQ_PRIOTMR		IRQ_CORETMR
+#else
+#define IRQ_SYSTMR		IRQ_TIMER0
+#define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
 
 #define __ipipe_root_tick_p(regs)	1
 

arch/blackfin/include/asm/ipipe_base.h

@@ -51,23 +51,23 @@
 
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
-static inline void __ipipe_stall_root(void)
-{
-	volatile unsigned long *p = &__ipipe_root_status;
-	set_bit(0, p);
-}
+#define __ipipe_stall_root()						\
+	do {								\
+		volatile unsigned long *p = &__ipipe_root_status;	\
+		set_bit(0, p);						\
+	} while (0)
 
-static inline unsigned long __ipipe_test_and_stall_root(void)
-{
-	volatile unsigned long *p = &__ipipe_root_status;
-	return test_and_set_bit(0, p);
-}
+#define __ipipe_test_and_stall_root()					\
+	({								\
+		volatile unsigned long *p = &__ipipe_root_status;	\
+		test_and_set_bit(0, p);					\
+	})
 
-static inline unsigned long __ipipe_test_root(void)
-{
-	const unsigned long *p = &__ipipe_root_status;
-	return test_bit(0, p);
-}
+#define __ipipe_test_root()					\
+	({							\
+		const unsigned long *p = &__ipipe_root_status;	\
+		test_bit(0, p);					\
+	})
 
 #endif /* !__ASSEMBLY__ */
 

arch/blackfin/include/asm/irq.h

@@ -22,13 +22,6 @@
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
 #include <mach/irq.h>
 
-/* Xenomai IPIPE helpers */
-#define local_irq_restore_hw(x) local_irq_restore(x)
-#define local_irq_save_hw(x)    local_irq_save(x)
-#define local_irq_enable_hw(x)  local_irq_enable(x)
-#define local_irq_disable_hw(x) local_irq_disable(x)
-#define irqs_disabled_hw(x)     irqs_disabled(x)
-
 #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
 # define NOP_PAD_ANOMALY_05000244 "nop; nop;"
 #else

arch/blackfin/include/asm/irqflags.h

@@ -31,6 +31,150 @@ static inline unsigned long bfin_cli(void)
 	return flags;
 }
 
+#ifdef CONFIG_IPIPE
+
+#include <linux/ipipe_base.h>
+#include <linux/ipipe_trace.h>
+
+#ifdef CONFIG_DEBUG_HWERR
+# define bfin_no_irqs 0x3f
+#else
+# define bfin_no_irqs 0x1f
+#endif
+
+#define raw_local_irq_disable()				\
+	do {						\
+		ipipe_check_context(ipipe_root_domain);	\
+		__ipipe_stall_root();			\
+		barrier();				\
+	} while (0)
+
+static inline void raw_local_irq_enable(void)
+{
+	barrier();
+	ipipe_check_context(ipipe_root_domain);
+	__ipipe_unstall_root();
+}
+
+#define raw_local_save_flags_ptr(x)					\
+	do {								\
+		*(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \
+	} while (0)
+
+#define raw_local_save_flags(x)		raw_local_save_flags_ptr(&(x))
+
+#define raw_irqs_disabled_flags(x)	((x) == bfin_no_irqs)
+
+#define raw_local_irq_save_ptr(x)					\
+	do {								\
+		*(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \
+		barrier();						\
+	} while (0)
+
+#define raw_local_irq_save(x)				\
+	do {						\
+		ipipe_check_context(ipipe_root_domain);	\
+		raw_local_irq_save_ptr(&(x));		\
+	} while (0)
+
+static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
+{
+	/*
+	 * Merge virtual and real interrupt mask bits into a single
+	 * 32bit word.
+	 */
+	return (real & ~(1 << 31)) | ((virt != 0) << 31);
+}
+
+static inline int raw_demangle_irq_bits(unsigned long *x)
+{
+	int virt = (*x & (1 << 31)) != 0;
+	*x &= ~(1L << 31);
+	return virt;
+}
+
+static inline void local_irq_disable_hw_notrace(void)
+{
+	bfin_cli();
+}
+
+static inline void local_irq_enable_hw_notrace(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+#define local_save_flags_hw(flags)			\
+	do {						\
+		(flags) = bfin_read_IMASK();		\
+	} while (0)
+
+#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0)
+
+#define irqs_disabled_hw()			\
+	({					\
+	unsigned long flags;			\
+	local_save_flags_hw(flags);		\
+	irqs_disabled_flags_hw(flags);		\
+	})
+
+static inline void local_irq_save_ptr_hw(unsigned long *flags)
+{
+	*flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+}
+
+#define local_irq_save_hw_notrace(flags)		\
+	do {						\
+		local_irq_save_ptr_hw(&(flags));	\
+	} while (0)
+
+static inline void local_irq_restore_hw_notrace(unsigned long flags)
+{
+	if (!irqs_disabled_flags_hw(flags))
+		local_irq_enable_hw_notrace();
+}
+
+#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
+# define local_irq_disable_hw()				\
+	do {						\
+		if (!irqs_disabled_hw()) {		\
+			local_irq_disable_hw_notrace();	\
+			ipipe_trace_begin(0x80000000);	\
+		}					\
+	} while (0)
+# define local_irq_enable_hw()				\
+	do {						\
+		if (irqs_disabled_hw()) {		\
+			ipipe_trace_end(0x80000000);	\
+			local_irq_enable_hw_notrace();	\
+		}					\
+	} while (0)
+# define local_irq_save_hw(flags)			\
+	do {						\
+		local_save_flags_hw(flags);		\
+		if (!irqs_disabled_flags_hw(flags)) {	\
+			local_irq_disable_hw_notrace();	\
+			ipipe_trace_begin(0x80000001);	\
+		}					\
+	} while (0)
+# define local_irq_restore_hw(flags)			\
+	do {						\
+		if (!irqs_disabled_flags_hw(flags)) {	\
+			ipipe_trace_end(0x80000001);	\
+			local_irq_enable_hw_notrace();	\
+		}					\
+	} while (0)
+#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+# define local_irq_disable_hw()		local_irq_disable_hw_notrace()
+# define local_irq_enable_hw()		local_irq_enable_hw_notrace()
+# define local_irq_save_hw(flags)	local_irq_save_hw_notrace(flags)
+# define local_irq_restore_hw(flags)	local_irq_restore_hw_notrace(flags)
+#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+
+#else /* CONFIG_IPIPE */
+
 static inline void raw_local_irq_disable(void)
 {
 	bfin_cli();
@@ -44,12 +188,6 @@ static inline void raw_local_irq_enable(void)
 
 #define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
 
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	if (!raw_irqs_disabled_flags(flags))
-		raw_local_irq_enable();
-}
-
 static inline unsigned long __raw_local_irq_save(void)
 {
 	unsigned long flags = bfin_cli();
@@ -60,4 +198,18 @@ static inline unsigned long __raw_local_irq_save(void)
 }
 #define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
 
+#define local_irq_save_hw(flags)	raw_local_irq_save(flags)
+#define local_irq_restore_hw(flags)	raw_local_irq_restore(flags)
+#define local_irq_enable_hw()		raw_local_irq_enable()
+#define local_irq_disable_hw()		raw_local_irq_disable()
+#define irqs_disabled_hw()		irqs_disabled()
+
+#endif /* !CONFIG_IPIPE */
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if (!raw_irqs_disabled_flags(flags))
+		raw_local_irq_enable();
+}
+
 #endif

arch/blackfin/include/asm/mem_init.h

@@ -59,7 +59,7 @@
 #define SDRAM_tRP       TRP_1
 #define SDRAM_tRP_num   1
 #define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
+#define SDRAM_tRAS_num  4
 #define SDRAM_tRCD      TRCD_1
 #define SDRAM_tWR       TWR_2
 #endif
@@ -89,6 +89,85 @@
 #endif
 #endif
 
+/*
+ * The BF526-EZ-Board changed SDRAM chips between revisions,
+ * so we use below timings to accommodate both.
+ */
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_8
+#define SDRAM_tRAS_num  8
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
 #if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
     defined(CONFIG_MEM_MT48LC8M32B2B5_7)
   /*SDRAM INFORMATION: */
@@ -109,6 +188,13 @@
 #define SDRAM_CL    CL_3
 #endif
 
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_2
+#endif
+
 
 #ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
 /* Equation from section 17 (p17-46) of BF533 HRM */

arch/blackfin/include/asm/mem_map.h

 /*
- * mem_map.h
- * Common header file for blackfin family of processors.
+ * Common Blackfin memory map
  *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_H_
-#define _MEM_MAP_H_
+#ifndef __BFIN_MEM_MAP_H__
+#define __BFIN_MEM_MAP_H__
 
 #include <mach/mem_map.h>
 
-#ifndef __ASSEMBLY__
+/* Every Blackfin so far has MMRs like this */
+#ifndef COREMMR_BASE
+# define COREMMR_BASE 0xFFE00000
+#endif
+#ifndef SYSMMR_BASE
+# define SYSMMR_BASE  0xFFC00000
+#endif
 
-#ifdef CONFIG_SMP
-static inline ulong get_l1_scratch_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
-}
-static inline ulong get_l1_code_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START;
-}
-static inline ulong get_l1_data_a_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
-}
-static inline ulong get_l1_data_b_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
-}
+/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */
+#ifndef L1_SCRATCH_START
+# define L1_SCRATCH_START  0xFFB00000
+# define L1_SCRATCH_LENGTH 0x1000
+#endif
 
-static inline ulong get_l1_scratch_start(void)
-{
-	return get_l1_scratch_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_code_start(void)
-{
-	return get_l1_code_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_data_a_start(void)
-{
-	return get_l1_data_a_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_data_b_start(void)
-{
-	return get_l1_data_b_start_cpu(blackfin_core_id());
-}
+/* Most parts lack on-chip L2 SRAM */
+#ifndef L2_START
+# define L2_START  0
+# define L2_LENGTH 0
+#endif
+
+/* Most parts lack on-chip L1 ROM */
+#ifndef L1_ROM_START
+# define L1_ROM_START  0
+# define L1_ROM_LENGTH 0
+#endif
+
+/* Allow wonky SMP ports to override this */
+#ifndef GET_PDA_SAFE
+# define GET_PDA_SAFE(preg) \
+	preg.l = _cpu_pda; \
+	preg.h = _cpu_pda;
+# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
 
-#else /* !CONFIG_SMP */
+# ifndef __ASSEMBLY__
 
-static inline ulong get_l1_scratch_start_cpu(int cpu)
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
 {
 	return L1_SCRATCH_START;
 }
-static inline ulong get_l1_code_start_cpu(int cpu)
+static inline unsigned long get_l1_code_start_cpu(int cpu)
 {
 	return L1_CODE_START;
 }
-static inline ulong get_l1_data_a_start_cpu(int cpu)
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
 {
 	return L1_DATA_A_START;
 }
-static inline ulong get_l1_data_b_start_cpu(int cpu)
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
 {
 	return L1_DATA_B_START;
 }
-static inline ulong get_l1_scratch_start(void)
+static inline unsigned long get_l1_scratch_start(void)
 {
 	return get_l1_scratch_start_cpu(0);
 }
-static inline ulong get_l1_code_start(void)
+static inline unsigned long get_l1_code_start(void)
 {
 	return  get_l1_code_start_cpu(0);
 }
-static inline ulong get_l1_data_a_start(void)
+static inline unsigned long get_l1_data_a_start(void)
 {
 	return get_l1_data_a_start_cpu(0);
 }
-static inline ulong get_l1_data_b_start(void)
+static inline unsigned long get_l1_data_b_start(void)
 {
 	return get_l1_data_b_start_cpu(0);
 }
 
-#endif /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLY__ */
+#endif /* !GET_PDA_SAFE */
 
-#endif				/* _MEM_MAP_H_ */
+#endif

arch/blackfin/include/asm/system.h

@@ -135,11 +135,13 @@ struct __xchg_dummy {
 };
 #define __xg(x) ((volatile struct __xchg_dummy *)(x))
 
+#include <mach/blackfin.h>
+
 static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 				   int size)
 {
 	unsigned long tmp = 0;
-	unsigned long flags = 0;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 

arch/blackfin/include/asm/traps.h

@@ -111,9 +111,7 @@
 	level "   bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
 #define EXC_0x2A(level) \
 	"Instruction fetch misaligned address violation\n" \
-	level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \
-	level "   exception, the return address provided in RETX is the destination address which is\n" \
-	level "   misaligned, rather than the address of the offending instruction.\n"
+	level " - Attempted misaligned instruction cache fetch.\n"
 #define EXC_0x2B(level) \
 	"CPLB protection violation\n" \
 	level " - Illegal instruction fetch access (memory protection violation).\n"

arch/blackfin/include/asm/uaccess.h

@@ -265,4 +265,26 @@ __clear_user(void *to, unsigned long n)
 
 #define clear_user(to, n) __clear_user(to, n)
 
+/* How to interpret these return values:
+ *	CORE:      can be accessed by core load or dma memcpy
+ *	CORE_ONLY: can only be accessed by core load
+ *	DMA:       can only be accessed by dma memcpy
+ *	IDMA:      can only be accessed by interprocessor dma memcpy (BF561)
+ *	ITEST:     can be accessed by isram memcpy or dma memcpy
+ */
+enum {
+	BFIN_MEM_ACCESS_CORE = 0,
+	BFIN_MEM_ACCESS_CORE_ONLY,
+	BFIN_MEM_ACCESS_DMA,
+	BFIN_MEM_ACCESS_IDMA,
+	BFIN_MEM_ACCESS_ITEST,
+};
+/**
+ *	bfin_mem_access_type() - what kind of memory access is required
+ *	@addr:   the address to check
+ *	@size:   number of bytes needed
+ *	@return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
+ */
+int bfin_mem_access_type(unsigned long addr, unsigned long size);
+
 #endif				/* _BLACKFIN_UACCESS_H */

arch/blackfin/include/asm/unistd.h

@@ -381,8 +381,9 @@
 #define __NR_preadv		366
 #define __NR_pwritev		367
 #define __NR_rt_tgsigqueueinfo	368
+#define __NR_perf_counter_open	369
 
-#define __NR_syscall		369
+#define __NR_syscall		370
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/Makefile

@@ -20,7 +20,6 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
 CFLAGS_REMOVE_ftrace.o = -pg
 
 obj-$(CONFIG_IPIPE)                  += ipipe.o
-obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o

arch/blackfin/kernel/cplb-mpu/cplbinit.c

@@ -46,13 +46,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 
 	printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n");
 
-#ifdef CONFIG_BFIN_ICACHE
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
 	i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #endif
 
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_WT
+#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
 	d_cache |= CPLB_L1_AOW | CPLB_WT;
 #endif
 #endif
@@ -91,9 +91,9 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	/* Cover L2 memory */
 #if L2_LENGTH > 0
 	dcplb_tbl[cpu][i_d].addr = L2_START;
-	dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
+	dcplb_tbl[cpu][i_d++].data = L2_DMEMORY;
 	icplb_tbl[cpu][i_i].addr = L2_START;
-	icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
+	icplb_tbl[cpu][i_i++].data = L2_IMEMORY;
 #endif
 
 	first_mask_dcplb = i_d;

arch/blackfin/kernel/cplb-mpu/cplbmgr.c

@@ -150,15 +150,19 @@ static noinline int dcplb_miss(unsigned int cpu)
 	nr_dcplb_miss[cpu]++;
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	if (bfin_addr_dcacheable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
-#ifdef CONFIG_BFIN_WT
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
 		d_data |= CPLB_L1_AOW | CPLB_WT;
-#endif
+# endif
 	}
 #endif
-	if (addr >= physical_mem_end) {
+
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		d_data = L2_DMEMORY;
+	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~0x3fffff;
@@ -235,7 +239,7 @@ static noinline int icplb_miss(unsigned int cpu)
 
 	i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
 
-#ifdef CONFIG_BFIN_ICACHE
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
 	/*
 	 * Normal RAM, and possibly the reserved memory area, are
 	 * cacheable.
@@ -245,7 +249,10 @@ static noinline int icplb_miss(unsigned int cpu)
 		i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #endif
 
-	if (addr >= physical_mem_end) {
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		i_data = L2_IMEMORY;
+	} else if (addr >= physical_mem_end) {
 		if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -365,13 +372,18 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 	local_irq_save_hw(flags);
 	current_rwx_mask[cpu] = masks;
 
-	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_DCACHE
-	d_data |= CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_WT
-	d_data |= CPLB_L1_AOW | CPLB_WT;
-#endif
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		d_data = L2_DMEMORY;
+	} else {
+		d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+		d_data |= CPLB_L1_CHBL;
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
+		d_data |= CPLB_L1_AOW | CPLB_WT;
+# endif
 #endif
+	}
 
 	disable_dcplb();
 	for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {

arch/blackfin/kernel/ipipe.c

@@ -52,7 +52,7 @@ EXPORT_SYMBOL(__ipipe_freq_scale);
 
 atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
 
-unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags;
+unsigned long __ipipe_irq_lvmask = bfin_no_irqs;
 EXPORT_SYMBOL(__ipipe_irq_lvmask);
 
 static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc)
@@ -342,8 +342,3 @@ void ___ipipe_sync_pipeline(unsigned long syncmask)
 }
 
 EXPORT_SYMBOL(show_stack);
-
-#ifdef CONFIG_IPIPE_TRACE_MCOUNT
-void notrace _mcount(void);
-EXPORT_SYMBOL(_mcount);
-#endif /* CONFIG_IPIPE_TRACE_MCOUNT */

arch/blackfin/kernel/irqchip.c

@@ -38,38 +38,15 @@
 #include <asm/pda.h>
 
 static atomic_t irq_err_count;
-static spinlock_t irq_controller_lock;
-
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
 void ack_bad_irq(unsigned int irq)
 {
 	atomic_inc(&irq_err_count);
 	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
 }
 
-static struct irq_chip bad_chip = {
-	.ack = dummy_mask_unmask_irq,
-	.mask = dummy_mask_unmask_irq,
-	.unmask = dummy_mask_unmask_irq,
-};
-
-static int bad_stats;
 static struct irq_desc bad_irq_desc = {
-	.status = IRQ_DISABLED,
-	.chip = &bad_chip,
 	.handle_irq = handle_bad_irq,
-	.depth = 1,
 	.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
-	.kstat_irqs = &bad_stats,
-#ifdef CONFIG_SMP
-	.affinity = CPU_MASK_ALL
-#endif
 };
 
 #ifdef CONFIG_CPUMASK_OFFSTACK
@@ -77,6 +54,7 @@ static struct irq_desc bad_irq_desc = {
 #error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
 #endif
 
+#ifdef CONFIG_PROC_FS
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, j;
@@ -108,50 +86,29 @@ int show_interrupts(struct seq_file *p, void *v)
 	}
 	return 0;
 }
-
-/*
- * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	struct irq_desc *desc = irq_desc + irq;
-#ifndef CONFIG_IPIPE
-	unsigned short pending, other_ints;
 #endif
-	old_regs = set_irq_regs(regs);
 
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (irq >= NR_IRQS)
-		desc = &bad_irq_desc;
-
-	irq_enter();
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
+static void check_stack_overflow(int irq)
+{
 	/* Debugging check for stack overflow: is there less than STACK_WARN free? */
-	{
-		long sp;
-
-		sp = __get_SP() & (THREAD_SIZE-1);
+	long sp = __get_SP() & (THREAD_SIZE - 1);
 
-		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-			dump_stack();
-			printk(KERN_EMERG "%s: possible stack overflow while handling irq %i "
-					" only %ld bytes free\n",
-				__func__, irq, sp - sizeof(struct thread_info));
-		}
+	if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+		dump_stack();
+		pr_emerg("irq%i: possible stack overflow only %ld bytes free\n",
+			irq, sp - sizeof(struct thread_info));
 	}
+}
+#else
+static inline void check_stack_overflow(int irq) { }
 #endif
-	generic_handle_irq(irq);
 
 #ifndef CONFIG_IPIPE
+static void maybe_lower_to_irq14(void)
+{
+	unsigned short pending, other_ints;
+
 	/*
 	 * If we're the only interrupt running (ignoring IRQ15 which
 	 * is for syscalls), lower our priority to IRQ14 so that
@@ -165,7 +122,38 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	other_ints = pending & (pending - 1);
 	if (other_ints == 0)
 		lower_to_irq14();
-#endif /* !CONFIG_IPIPE */
+}
+#else
+static inline void maybe_lower_to_irq14(void) { }
+#endif
+
+/*
+ * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
+ * come via this function.  Instead, they should provide their
+ * own 'handler'
+ */
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	check_stack_overflow(irq);
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (irq >= NR_IRQS)
+		handle_bad_irq(irq, &bad_irq_desc);
+	else
+		generic_handle_irq(irq);
+
+	maybe_lower_to_irq14();
+
 	irq_exit();
 
 	set_irq_regs(old_regs);
@@ -173,14 +161,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 
 void __init init_IRQ(void)
 {
-	struct irq_desc *desc;
-	int irq;
-
-	spin_lock_init(&irq_controller_lock);
-	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
-		*desc = bad_irq_desc;
-	}
-
 	init_arch_irq();
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND

arch/blackfin/kernel/kgdb.c

@@ -34,15 +34,6 @@ int gdb_bfin_vector = -1;
 #error change the definition of slavecpulocks
 #endif
 
-#define IN_MEM(addr, size, l1_addr, l1_size) \
-({ \
-	unsigned long __addr = (unsigned long)(addr); \
-	(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
-})
-#define ASYNC_BANK_SIZE \
-	(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
-	 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
-
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	gdb_regs[BFIN_R0] = regs->r0;
@@ -463,41 +454,88 @@ static int hex(char ch)
 
 static int validate_memory_access_address(unsigned long addr, int size)
 {
-	int cpu = raw_smp_processor_id();
-
-	if (size < 0)
+	if (size < 0 || addr == 0)
 		return -EFAULT;
-	if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
-		return 0;
-	if (addr >= SYSMMR_BASE)
-		return 0;
-	if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE))
-		return 0;
-	if (cpu == 0) {
-		if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
-			return 0;
-		if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH))
-			return 0;
-		if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
-			return 0;
-		if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
-			return 0;
-#ifdef CONFIG_SMP
-	} else if (cpu == 1) {
-		if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+	return bfin_mem_access_type(addr, size);
+}
+
+static int bfin_probe_kernel_read(char *dst, char *src, int size)
+{
+	unsigned long lsrc = (unsigned long)src;
+	int mem_type;
+
+	mem_type = validate_memory_access_address(lsrc, size);
+	if (mem_type < 0)
+		return mem_type;
+
+	if (lsrc >= SYSMMR_BASE) {
+		if (size == 2 && lsrc % 2 == 0) {
+			u16 mmr = bfin_read16(src);
+			memcpy(dst, &mmr, sizeof(mmr));
 			return 0;
-		if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+		} else if (size == 4 && lsrc % 4 == 0) {
+			u32 mmr = bfin_read32(src);
+			memcpy(dst, &mmr, sizeof(mmr));
 			return 0;
-		if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+		}
+	} else {
+		switch (mem_type) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
+				return probe_kernel_read(dst, src, size);
+			/* XXX: should support IDMA here with SMP */
+			case BFIN_MEM_ACCESS_DMA:
+				if (dma_memcpy(dst, src, size))
+					return 0;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(dst, src, size))
+					return 0;
+				break;
+		}
+	}
+
+	return -EFAULT;
+}
+
+static int bfin_probe_kernel_write(char *dst, char *src, int size)
+{
+	unsigned long ldst = (unsigned long)dst;
+	int mem_type;
+
+	mem_type = validate_memory_access_address(ldst, size);
+	if (mem_type < 0)
+		return mem_type;
+
+	if (ldst >= SYSMMR_BASE) {
+		if (size == 2 && ldst % 2 == 0) {
+			u16 mmr;
+			memcpy(&mmr, src, sizeof(mmr));
+			bfin_write16(dst, mmr);
 			return 0;
-		if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+		} else if (size == 4 && ldst % 4 == 0) {
+			u32 mmr;
+			memcpy(&mmr, src, sizeof(mmr));
+			bfin_write32(dst, mmr);
 			return 0;
-#endif
+		}
+	} else {
+		switch (mem_type) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
+				return probe_kernel_write(dst, src, size);
+			/* XXX: should support IDMA here with SMP */
+			case BFIN_MEM_ACCESS_DMA:
+				if (dma_memcpy(dst, src, size))
+					return 0;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(dst, src, size))
+					return 0;
+				break;
+		}
 	}
 
-	if (IN_MEM(addr, size, L2_START, L2_LENGTH))
-		return 0;
-
 	return -EFAULT;
 }
 
@@ -509,14 +547,6 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 {
 	char *tmp;
 	int err;
-	unsigned char *pch;
-	unsigned short mmr16;
-	unsigned long mmr32;
-	int cpu = raw_smp_processor_id();
-
-	err = validate_memory_access_address((unsigned long)mem, count);
-	if (err)
-		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -524,44 +554,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 	 */
 	tmp = buf + count;
 
-	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
-		switch (count) {
-		case 2:
-			if ((unsigned int)mem % 2 == 0) {
-				mmr16 = *(unsigned short *)mem;
-				pch = (unsigned char *)&mmr16;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				tmp -= 2;
-			} else
-				err = -EFAULT;
-			break;
-		case 4:
-			if ((unsigned int)mem % 4 == 0) {
-				mmr32 = *(unsigned long *)mem;
-				pch = (unsigned char *)&mmr32;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				tmp -= 4;
-			} else
-				err = -EFAULT;
-			break;
-		default:
-			err = -EFAULT;
-		}
-	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM*/
-		if (dma_memcpy(tmp, mem, count) == NULL)
-			err = -EFAULT;
-	} else
-		err = probe_kernel_read(tmp, mem, count);
-
+	err = bfin_probe_kernel_read(tmp, mem, count);
 	if (!err) {
 		while (count > 0) {
 			buf = pack_hex_byte(buf, *tmp);
@@ -582,13 +575,8 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
  */
 int kgdb_ebin2mem(char *buf, char *mem, int count)
 {
-	char *tmp_old;
-	char *tmp_new;
-	unsigned short *mmr16;
-	unsigned long *mmr32;
-	int err;
+	char *tmp_old, *tmp_new;
 	int size;
-	int cpu = raw_smp_processor_id();
 
 	tmp_old = tmp_new = buf;
 
@@ -601,41 +589,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 		tmp_old++;
 	}
 
-	err = validate_memory_access_address((unsigned long)mem, size);
-	if (err)
-		return err;
-
-	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
-		switch (size) {
-		case 2:
-			if ((unsigned int)mem % 2 == 0) {
-				mmr16 = (unsigned short *)buf;
-				*(unsigned short *)mem = *mmr16;
-			} else
-				err = -EFAULT;
-			break;
-		case 4:
-			if ((unsigned int)mem % 4 == 0) {
-				mmr32 = (unsigned long *)buf;
-				*(unsigned long *)mem = *mmr32;
-			} else
-				err = -EFAULT;
-			break;
-		default:
-			err = -EFAULT;
-		}
-	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy(mem, buf, size) == NULL)
-			err = -EFAULT;
-	} else
-		err = probe_kernel_write(mem, buf, size);
-
-	return err;
+	return bfin_probe_kernel_write(mem, buf, count);
 }
 
 /*
@@ -645,16 +599,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
  */
 int kgdb_hex2mem(char *buf, char *mem, int count)
 {
-	char *tmp_raw;
-	char *tmp_hex;
-	unsigned short *mmr16;
-	unsigned long *mmr32;
-	int err;
-	int cpu = raw_smp_processor_id();
-
-	err = validate_memory_access_address((unsigned long)mem, count);
-	if (err)
-		return err;
+	char *tmp_raw, *tmp_hex;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -669,39 +614,18 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 		*tmp_raw |= hex(*tmp_hex--) << 4;
 	}
 
-	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
-		switch (count) {
-		case 2:
-			if ((unsigned int)mem % 2 == 0) {
-				mmr16 = (unsigned short *)tmp_raw;
-				*(unsigned short *)mem = *mmr16;
-			} else
-				err = -EFAULT;
-			break;
-		case 4:
-			if ((unsigned int)mem % 4 == 0) {
-				mmr32 = (unsigned long *)tmp_raw;
-				*(unsigned long *)mem = *mmr32;
-			} else
-				err = -EFAULT;
-			break;
-		default:
-			err = -EFAULT;
-		}
-	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy(mem, tmp_raw, count) == NULL)
-			err = -EFAULT;
-	} else
-		err = probe_kernel_write(mem, tmp_raw, count);
-
-	return err;
+	return bfin_probe_kernel_write(mem, tmp_raw, count);
 }
 
+#define IN_MEM(addr, size, l1_addr, l1_size) \
+({ \
+	unsigned long __addr = (unsigned long)(addr); \
+	(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
+})
+#define ASYNC_BANK_SIZE \
+	(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
+	 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
+
 int kgdb_validate_break_address(unsigned long addr)
 {
 	int cpu = raw_smp_processor_id();
@@ -724,46 +648,17 @@ int kgdb_validate_break_address(unsigned long addr)
 
 int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
 {
-	int err;
-	int cpu = raw_smp_processor_id();
-
-	if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE)
-			== NULL)
-			return -EFAULT;
-
-		if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr,
-			BREAK_INSTR_SIZE) == NULL)
-			return -EFAULT;
-
-		return 0;
-	} else {
-		err = probe_kernel_read(saved_instr, (char *)addr,
-			BREAK_INSTR_SIZE);
-		if (err)
-			return err;
-
-		return probe_kernel_write((char *)addr,
-			arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
-	}
+	int err = bfin_probe_kernel_read(saved_instr, (char *)addr,
+	                                 BREAK_INSTR_SIZE);
+	if (err)
+		return err;
+	return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
+	                               BREAK_INSTR_SIZE);
 }
 
 int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
 {
-	if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL)
-			return -EFAULT;
-
-		return 0;
-	} else
-		return probe_kernel_write((char *)addr,
-				(char *)bundle, BREAK_INSTR_SIZE);
+	return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE);
 }
 
 int kgdb_arch_init(void)

arch/blackfin/kernel/mcount.S

-/*
- * linux/arch/blackfin/mcount.S
- *
- * Copyright (C) 2006 Analog Devices Inc.
- *
- * 2007/04/12 Save index, length, modify and base registers. --rpm
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-.align 4 	/* just in case */
-
-ENTRY(__mcount)
-	[--sp] = i0;
-	[--sp] = i1;
-	[--sp] = i2;
-	[--sp] = i3;
-	[--sp] = l0;
-	[--sp] = l1;
-	[--sp] = l2;
-	[--sp] = l3;
-	[--sp] = m0;
-	[--sp] = m1;
-	[--sp] = m2;
-	[--sp] = m3;
-	[--sp] = b0;
-	[--sp] = b1;
-	[--sp] = b2;
-	[--sp] = b3;
-	[--sp] = ( r7:0, p5:0 );
-	[--sp] = ASTAT;
-
-	p1.L = _ipipe_trace_enable;
-	p1.H = _ipipe_trace_enable;
-	r7 = [p1];
-	CC = r7 == 0;
-	if CC jump out;
-	link 0x10;
-	r0 = 0x0;
-	[sp + 0xc] = r0; /* v */
-	r0 = 0x0;	/* type: IPIPE_TRACE_FN */
-	r1 = rets;
-	p0 = [fp];	/* p0: Prior FP */
-	r2 = [p0 + 4];	/* r2: Prior RETS */
-	call ___ipipe_trace;
-	unlink;
-out:
-	ASTAT = [sp++];
-	( r7:0, p5:0 ) = [sp++];
-	b3 = [sp++];
-	b2 = [sp++];
-	b1 = [sp++];
-	b0 = [sp++];
-	m3 = [sp++];
-	m2 = [sp++];
-	m1 = [sp++];
-	m0 = [sp++];
-	l3 = [sp++];
-	l2 = [sp++];
-	l1 = [sp++];
-	l0 = [sp++];
-	i3 = [sp++];
-	i2 = [sp++];
-	i1 = [sp++];
-	i0 = [sp++];
-	rts;
-ENDPROC(__mcount)

arch/blackfin/kernel/process.c

@@ -344,6 +344,87 @@ void finish_atomic_sections (struct pt_regs *regs)
 	}
 }
 
+static inline
+int in_mem(unsigned long addr, unsigned long size,
+           unsigned long start, unsigned long end)
+{
+	return addr >= start && addr + size <= end;
+}
+static inline
+int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off,
+                     unsigned long const_addr, unsigned long const_size)
+{
+	return const_size &&
+	       in_mem(addr, size, const_addr + off, const_addr + const_size);
+}
+static inline
+int in_mem_const(unsigned long addr, unsigned long size,
+                 unsigned long const_addr, unsigned long const_size)
+{
+	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+}
+#define IN_ASYNC(bnum, bctlnum) \
+({ \
+	(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \
+	bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \
+	BFIN_MEM_ACCESS_CORE; \
+})
+
+int bfin_mem_access_type(unsigned long addr, unsigned long size)
+{
+	int cpu = raw_smp_processor_id();
+
+	/* Check that things do not wrap around */
+	if (addr > ULONG_MAX - size)
+		return -EFAULT;
+
+	if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end))
+		return BFIN_MEM_ACCESS_CORE;
+
+	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+	if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#ifdef COREB_L1_CODE_START
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#endif
+	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
+		return BFIN_MEM_ACCESS_CORE;
+
+	if (addr >= SYSMMR_BASE)
+		return BFIN_MEM_ACCESS_CORE_ONLY;
+
+	/* We can't read EBIU banks that aren't enabled or we end up hanging
+	 * on the access to the async space.
+	 */
+	if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE))
+		return IN_ASYNC(0, 0);
+	if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE))
+		return IN_ASYNC(1, 0);
+	if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE))
+		return IN_ASYNC(2, 1);
+	if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE))
+		return IN_ASYNC(3, 1);
+
+	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+		return BFIN_MEM_ACCESS_CORE;
+	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+		return BFIN_MEM_ACCESS_DMA;
+
+	return -EFAULT;
+}
+
 #if defined(CONFIG_ACCESS_CHECK)
 #ifdef CONFIG_ACCESS_OK_L1
 __attribute__((l1_text))
@@ -353,51 +434,61 @@ int _access_ok(unsigned long addr, unsigned long size)
 {
 	if (size == 0)
 		return 1;
-	if (addr > (addr + size))
+	/* Check that things do not wrap around */
+	if (addr > ULONG_MAX - size)
 		return 0;
 	if (segment_eq(get_fs(), KERNEL_DS))
 		return 1;
 #ifdef CONFIG_MTD_UCLINUX
-	if (addr >= memory_start && (addr + size) <= memory_end)
-		return 1;
-	if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
+	if (1)
+#else
+	if (0)
+#endif
+	{
+		if (in_mem(addr, size, memory_start, memory_end))
+			return 1;
+		if (in_mem(addr, size, memory_mtd_end, physical_mem_end))
+			return 1;
+# ifndef CONFIG_ROMFS_ON_MTD
+		if (0)
+# endif
+			/* For XIP, allow user space to use pointers within the ROMFS.  */
+			if (in_mem(addr, size, memory_mtd_start, memory_mtd_end))
+				return 1;
+	} else {
+		if (in_mem(addr, size, memory_start, physical_mem_end))
+			return 1;
+	}
+
+	if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end))
 		return 1;
 
-#ifdef CONFIG_ROMFS_ON_MTD
-	/* For XIP, allow user space to use pointers within the ROMFS.  */
-	if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end)
+	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
 		return 1;
-#endif
-#else
-	if (addr >= memory_start && (addr + size) <= physical_mem_end)
+	if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH))
 		return 1;
-#endif
-	if (addr >= (unsigned long)__init_begin &&
-	    addr + size <= (unsigned long)__init_end)
+	if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH))
 		return 1;
-	if (addr >= get_l1_scratch_start()
-	    && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH)
+	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
-#if L1_CODE_LENGTH != 0
-	if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1)
-	    && addr + size <= get_l1_code_start() + L1_CODE_LENGTH)
+#ifdef COREB_L1_CODE_START
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
 		return 1;
-#endif
-#if L1_DATA_A_LENGTH != 0
-	if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1)
-	    && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH)
+	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-#endif
-#if L1_DATA_B_LENGTH != 0
-	if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1)
-	    && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH)
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
 		return 1;
-#endif
-#if L2_LENGTH != 0
-	if (addr >= L2_START + (_ebss_l2 - _stext_l2)
-	    && addr + size <= L2_START + L2_LENGTH)
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #endif
+	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
+		return 1;
+
+	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+		return 1;
+	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+		return 1;
+
 	return 0;
 }
 EXPORT_SYMBOL(_access_ok);

arch/blackfin/kernel/setup.c

@@ -117,15 +117,49 @@ void __cpuinit bfin_setup_caches(unsigned int cpu)
 	 */
 #ifdef CONFIG_BFIN_ICACHE
 	printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+	printk(KERN_INFO "  External memory:"
+# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+	       " cacheable"
+# else
+	       " uncacheable"
+# endif
+	       " in instruction cache\n");
+	if (L2_LENGTH)
+		printk(KERN_INFO "  L2 SRAM        :"
+# ifdef CONFIG_BFIN_L2_ICACHEABLE
+		       " cacheable"
+# else
+		       " uncacheable"
+# endif
+		       " in instruction cache\n");
+
+#else
+	printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
 #endif
+
 #ifdef CONFIG_BFIN_DCACHE
-	printk(KERN_INFO "Data Cache Enabled for CPU%u"
-# if defined CONFIG_BFIN_WB
-		" (write-back)"
-# elif defined CONFIG_BFIN_WT
-		" (write-through)"
+	printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
+	printk(KERN_INFO "  External memory:"
+# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
+	       " cacheable (write-back)"
+# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
+	       " cacheable (write-through)"
+# else
+	       " uncacheable"
 # endif
-		"\n", cpu);
+	       " in data cache\n");
+	if (L2_LENGTH)
+		printk(KERN_INFO "  L2 SRAM        :"
+# if defined CONFIG_BFIN_L2_WRITEBACK
+		       " cacheable (write-back)"
+# elif defined CONFIG_BFIN_L2_WRITETHROUGH
+		       " cacheable (write-through)"
+# else
+		       " uncacheable"
+# endif
+		       " in data cache\n");
+#else
+	printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
 #endif
 }
 
@@ -443,9 +477,11 @@ static __init void parse_cmdline_early(char *cmdline_p)
 			} else if (!memcmp(to, "clkin_hz=", 9)) {
 				to += 9;
 				early_init_clkin_hz(to);
+#ifdef CONFIG_EARLY_PRINTK
 			} else if (!memcmp(to, "earlyprintk=", 12)) {
 				to += 12;
 				setup_early_printk(to);
+#endif
 			} else if (!memcmp(to, "memmap=", 7)) {
 				to += 7;
 				parse_memmap(to);
@@ -516,7 +552,7 @@ static __init void memory_setup(void)
 	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
 		mtd_size =
 		    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-#  if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#  if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
 	/* Due to a Hardware Anomaly we need to limit the size of usable
 	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
 	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -544,7 +580,7 @@ static __init void memory_setup(void)
 	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
 	/* Due to a Hardware Anomaly we need to limit the size of usable
 	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
 	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -764,6 +800,11 @@ void __init setup_arch(char **cmdline_p)
 {
 	unsigned long sclk, cclk;
 
+	/* Check to make sure we are running on the right processor */
+	if (unlikely(CPUID != bfin_cpuid()))
+		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+			CPU, bfin_cpuid(), bfin_revid());
+
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
 #endif
@@ -778,14 +819,17 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
 
-	/* setup memory defaults from the user config */
-	physical_mem_end = 0;
-	_ramend = get_mem_size() * 1024 * 1024;
-
 	memset(&bfin_memmap, 0, sizeof(bfin_memmap));
 
+	/* If the user does not specify things on the command line, use
+	 * what the bootloader set things up as
+	 */
+	physical_mem_end = 0;
 	parse_cmdline_early(&command_line[0]);
 
+	if (_ramend == 0)
+		_ramend = get_mem_size() * 1024 * 1024;
+
 	if (physical_mem_end == 0)
 		physical_mem_end = _ramend;
 
@@ -837,7 +881,8 @@ void __init setup_arch(char **cmdline_p)
     defined(CONFIG_BF538) || defined(CONFIG_BF539)
 	_bfin_swrst = bfin_read_SWRST();
 #else
-	_bfin_swrst = bfin_read_SYSCR();
+	/* Clear boot mode field */
+	_bfin_swrst = bfin_read_SYSCR() & ~0xf;
 #endif
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
@@ -875,10 +920,7 @@ void __init setup_arch(char **cmdline_p)
 	else
 		printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
 
-	if (unlikely(CPUID != bfin_cpuid()))
-		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
-			CPU, bfin_cpuid(), bfin_revid());
-	else {
+	if (likely(CPUID == bfin_cpuid())) {
 		if (bfin_revid() != bfin_compiled_revid()) {
 			if (bfin_compiled_revid() == -1)
 				printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
@@ -1157,16 +1199,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
-		icache_size, dcache_size,
-#if defined CONFIG_BFIN_WB
-		"-wb"
-#elif defined CONFIG_BFIN_WT
-		"-wt"
-#endif
-		"", 0);
-
+		"%d KB(L1 dcache) %d KB(L2 cache)\n",
+		icache_size, dcache_size, 0);
 	seq_printf(m, "%s\n", cache);
+	seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+		   "cacheable"
+#else
+		   "uncacheable"
+#endif
+		   " in instruction cache\n");
+	seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+		      "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+		      "cacheable (write-through)"
+#else
+		      "uncacheable"
+#endif
+		      " in data cache\n");
 
 	if (icache_size)
 		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
@@ -1239,8 +1290,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_num != num_possible_cpus() - 1)
 		return 0;
 
-	if (L2_LENGTH)
+	if (L2_LENGTH) {
 		seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
+		seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+			      "cacheable"
+#else
+			      "uncacheable"
+#endif
+			      " in instruction cache\n");
+		seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+			      "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+			      "cacheable (write-through)"
+#else
+			      "uncacheable"
+#endif
+			      " in data cache\n");
+	}
 	seq_printf(m, "board name\t: %s\n", bfin_board_name);
 	seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
 		 physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);

arch/blackfin/kernel/traps.c

@@ -37,6 +37,7 @@
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
 #include <asm/cplb.h>
+#include <asm/dma.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <linux/irq.h>
@@ -636,57 +637,30 @@ asmlinkage void trap_c(struct pt_regs *fp)
  */
 static bool get_instruction(unsigned short *val, unsigned short *address)
 {
-
-	unsigned long addr;
-
-	addr = (unsigned long)address;
+	unsigned long addr = (unsigned long)address;
 
 	/* Check for odd addresses */
 	if (addr & 0x1)
 		return false;
 
-	/* Check that things do not wrap around */
-	if (addr > (addr + 2))
+	/* MMR region will never have instructions */
+	if (addr >= SYSMMR_BASE)
 		return false;
 
-	/*
-	 * Since we are in exception context, we need to do a little address checking
-	 * We need to make sure we are only accessing valid memory, and
-	 * we don't read something in the async space that can hang forever
-	 */
-	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
-#if L2_LENGTH != 0
-	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
-#endif
-	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
-#if L1_DATA_A_LENGTH != 0
-	    (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
-#endif
-#if L1_DATA_B_LENGTH != 0
-	    (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
-#endif
-	    (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
-	    (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
-	       addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
-	    (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
-	       addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
-	    (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
-	       addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
-	    (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
-	      addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
-		*val = *address;
-		return true;
+	switch (bfin_mem_access_type(addr, 2)) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			*val = *address;
+			return true;
+		case BFIN_MEM_ACCESS_DMA:
+			dma_memcpy(val, address, 2);
+			return true;
+		case BFIN_MEM_ACCESS_ITEST:
+			isram_memcpy(val, address, 2);
+			return true;
+		default: /* invalid access */
+			return false;
 	}
-
-#if L1_CODE_LENGTH != 0
-	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
-		isram_memcpy(val, address, 2);
-		return true;
-	}
-#endif
-
-
-	return false;
 }
 
 /*

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -119,13 +119,19 @@ static struct platform_device bfin_mac_device = {
 };
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
-static struct dsa_platform_data ksz8893m_switch_data = {
+static struct dsa_chip_data ksz8893m_switch_chip_data = {
 	.mii_bus = &bfin_mii_bus.dev,
+	.port_names = {
+		NULL,
+		"eth%d",
+		"eth%d",
+		"cpu",
+	},
+};
+static struct dsa_platform_data ksz8893m_switch_data = {
+	.nr_chips = 1,
 	.netdev = &bfin_mac_device.dev,
-	.port_names[0]	= NULL,
-	.port_names[1]	= "eth%d",
-	.port_names[2]	= "eth%d",
-	.port_names[3]	= "cpu",
+	.chip = &ksz8893m_switch_chip_data,
 };
 
 static struct platform_device ksz8893m_switch_device = {

arch/blackfin/mach-bf518/include/mach/anomaly.h

@@ -7,7 +7,7 @@
  */
 
 /* This file should be up to date with:
- *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ *  - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
@@ -18,7 +18,7 @@
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
@@ -45,29 +45,31 @@
 /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (1)
+#define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (1)
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 (1)
+#define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
-#define ANOMALY_05000438 (1)
+#define ANOMALY_05000438 (__SILICON_REVISION__ < 1)
 /* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (1)
+#define ANOMALY_05000439 (__SILICON_REVISION__ < 1)
 /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (1)
+#define ANOMALY_05000440 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
-#define ANOMALY_05000444 (1)
+#define ANOMALY_05000444 (__SILICON_REVISION__ < 1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (1)
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
 /* PWM_TRIPB Signal Not Available on PG10 */
-#define ANOMALY_05000453 (1)
+#define ANOMALY_05000453 (__SILICON_REVISION__ < 1)
 /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
-#define ANOMALY_05000455 (1)
-/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000455 (__SILICON_REVISION__ < 1)
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -78,24 +80,30 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
 #define ANOMALY_05000285 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
@@ -103,10 +111,13 @@
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
+#define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000389 (0)
@@ -117,5 +128,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif

arch/blackfin/mach-bf518/include/mach/blackfin.h

@@ -33,7 +33,6 @@
 #define _MACH_BLACKFIN_H_
 
 #include "bf518.h"
-#include "mem_map.h"
 #include "defBF512.h"
 #include "anomaly.h"
 

arch/blackfin/mach-bf518/include/mach/mem_map.h

 /*
- * file:         include/asm-blackfin/mach-bf518/mem_map.h
- * based on:	include/asm-blackfin/mach-bf527/mem_map.h
- * author:	Bryan Wu <cooloney@kernel.org>
+ * BF51x memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF518/6/4/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_518_H_
-#define _MEM_MAP_518_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
@@ -89,20 +67,4 @@
 #define BFIN_DSUPBANKS		0
 #endif				/*CONFIG_BFIN_DCACHE */
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_518_H_ */
+#endif

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -78,7 +78,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -237,10 +237,10 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.name = "m25p80",
 	.parts = bfin_spi_flash_partitions,
 	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
+	.type = "sst25wf040",
 };
 
-/* SPI flash chip (m25p64) */
+/* SPI flash chip (sst25wf040) */
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 	.bits_per_word = 8,

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -77,7 +77,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,

arch/blackfin/mach-bf527/include/mach/anomaly.h

@@ -34,7 +34,7 @@
 #define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
 #define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
@@ -184,8 +184,12 @@
 #define ANOMALY_05000456 (1)
 /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
 #define ANOMALY_05000457 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -195,24 +199,30 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
 #define ANOMALY_05000285 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
@@ -220,6 +230,7 @@
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)

arch/blackfin/mach-bf527/include/mach/blackfin.h

@@ -33,7 +33,6 @@
 #define _MACH_BLACKFIN_H_
 
 #include "bf527.h"
-#include "mem_map.h"
 #include "defBF522.h"
 #include "anomaly.h"
 

arch/blackfin/mach-bf527/include/mach/mem_map.h

 /*
- * file:         include/asm-blackfin/mach-bf527/mem_map.h
- * based on:	include/asm-blackfin/mach-bf537/mem_map.h
- * author:	Michael Hennerich (michael.hennerich@analog.com)
+ * BF52x memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF527/5/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_527_H_
-#define _MEM_MAP_527_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
@@ -89,20 +67,4 @@
 #define BFIN_DSUPBANKS	0
 #endif				/*CONFIG_BFIN_DCACHE */
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_527_H_ */
+#endif

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -86,6 +87,101 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+static const char *map_probes[] = {
+	"stm_flash",
+	NULL,
+};
+
+static struct platdata_mtd_ram stm_pri_data_a = {
+	.mapname    = "Flash A Primary",
+	.map_probes = map_probes,
+	.bankwidth  = 2,
+};
+
+static struct resource stm_pri_resource_a = {
+	.start = 0x20000000,
+	.end   = 0x200fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_a = {
+	.name          = "mtd-ram",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stm_pri_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &stm_pri_resource_a,
+};
+
+static struct platdata_mtd_ram stm_pri_data_b = {
+	.mapname    = "Flash B Primary",
+	.map_probes = map_probes,
+	.bankwidth  = 2,
+};
+
+static struct resource stm_pri_resource_b = {
+	.start = 0x20100000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_b = {
+	.name          = "mtd-ram",
+	.id            = 4,
+	.dev = {
+		.platform_data = &stm_pri_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &stm_pri_resource_b,
+};
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram sram_data_a = {
+	.mapname   = "Flash A SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_a = {
+	.start = 0x20240000,
+	.end   = 0x2024ffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_a = {
+	.name          = "mtd-ram",
+	.id            = 8,
+	.dev = {
+		.platform_data = &sram_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_a,
+};
+
+static struct platdata_mtd_ram sram_data_b = {
+	.mapname   = "Flash B SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_b = {
+	.start = 0x202c0000,
+	.end   = 0x202cffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_b = {
+	.name          = "mtd-ram",
+	.id            = 9,
+	.dev = {
+		.platform_data = &sram_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_b,
+};
+#endif
+
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
 
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+	&stm_pri_device_a,
+	&stm_pri_device_b,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+	&sram_device_a,
+	&sram_device_b,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif

arch/blackfin/mach-bf533/include/mach/blackfin.h

@@ -34,7 +34,6 @@
 #define BF533_FAMILY
 
 #include "bf533.h"
-#include "mem_map.h"
 #include "defBF532.h"
 #include "anomaly.h"
 

arch/blackfin/mach-bf533/include/mach/mem_map.h

 /*
- * File:         include/asm-blackfin/mach-bf533/mem_map.h
- * Based on:
- * Author:
+ * BF533 memory map
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_533_H_
-#define _MEM_MAP_533_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
@@ -158,20 +136,4 @@
 
 #endif
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_533_H_ */
+#endif

arch/blackfin/mach-bf537/boards/stamp.c

@@ -79,7 +79,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,

arch/blackfin/mach-bf537/include/mach/anomaly.h

@@ -34,13 +34,13 @@
 # define ANOMALY_BF537 0
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
 /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
@@ -50,11 +50,11 @@
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
-/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+/* Buffered CLKIN Output Is Disabled by Default */
 #define ANOMALY_05000247 (1)
 /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
-/* EMAC Tx DMA error after an early frame abort */
+/* EMAC TX DMA Error After an Early Frame Abort */
 #define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
 /* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
@@ -62,7 +62,7 @@
 #define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
 /* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
 #define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
-/* EMAC MDIO input latched on wrong MDC edge */
+/* EMAC MDIO Input Latched on Wrong MDC Edge */
 #define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
 /* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
 #define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
@@ -80,7 +80,7 @@
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */
 #define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
@@ -92,15 +92,15 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
-/* SPI Master boot mode does not work well with Atmel Data flash devices */
+/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */
 #define ANOMALY_05000280 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
-/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */
 #define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
@@ -112,25 +112,25 @@
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
-/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */
 #define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: collisions occur in Full Duplex mode */
+/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */
 #define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */
 #define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */
 #define ANOMALY_05000322 (1)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot */
+/* UART Gets Disabled after UART Boot */
 #define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (1)
@@ -154,7 +154,7 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
@@ -165,14 +165,17 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
@@ -195,5 +198,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif

arch/blackfin/mach-bf537/include/mach/blackfin.h

@@ -35,7 +35,6 @@
 #define BF537_FAMILY
 
 #include "bf537.h"
-#include "mem_map.h"
 #include "defBF534.h"
 #include "anomaly.h"
 

arch/blackfin/mach-bf537/include/mach/mem_map.h

 /*
- * file:         include/asm-blackfin/mach-bf537/mem_map.h
- * based on:
- * author:
+ * BF537 memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_537_H_
-#define _MEM_MAP_537_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
@@ -166,20 +144,4 @@
 
 #endif
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_537_H_ */
+#endif

arch/blackfin/mach-bf538/include/mach/anomaly.h

@@ -30,13 +30,13 @@
 # define ANOMALY_BF539 0
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (1)
@@ -70,11 +70,11 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
@@ -92,11 +92,11 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
 /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
 #define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
@@ -110,7 +110,7 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 5)
 /* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */
 #define ANOMALY_05000374 (__SILICON_REVISION__ == 4)
-/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */
+/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
 #define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
 #define ANOMALY_05000402 (__SILICON_REVISION__ < 4)
@@ -126,26 +126,32 @@
 #define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
 #define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
 #define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000305 (0)
@@ -166,5 +172,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif

arch/blackfin/mach-bf538/include/mach/blackfin.h

@@ -35,7 +35,6 @@
 #define BF538_FAMILY
 
 #include "bf538.h"
-#include "mem_map.h"
 #include "defBF539.h"
 #include "anomaly.h"
 

arch/blackfin/mach-bf538/include/mach/mem_map.h

 /*
- * File:         include/asm-blackfin/mach-bf538/mem_map.h
- * Based on:
- * Author:
+ * BF538 memory map
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_538_H_
-#define _MEM_MAP_538_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
@@ -93,21 +71,4 @@
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
 
-
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_538_H_ */
+#endif

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -76,7 +76,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,

arch/blackfin/mach-bf548/include/mach/anomaly.h

@@ -18,7 +18,7 @@
 # error will not work on BF548 silicon version 0.0, or 0.1
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
@@ -30,17 +30,17 @@
 #define ANOMALY_05000265 (1)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
 /* TWI Slave Boot Mode Is Not Functional */
 #define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
-/* External FIFO Boot Mode Is Not Functional */
+/* FIFO Boot Mode Not Functional */
 #define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
 /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
 #define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
@@ -178,8 +178,12 @@
 #define ANOMALY_05000450 (1)
 /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
 #define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -189,30 +193,36 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
 #define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000283 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
+#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)

arch/blackfin/mach-bf548/include/mach/blackfin.h

@@ -33,7 +33,6 @@
 #define _MACH_BLACKFIN_H_
 
 #include "bf548.h"
-#include "mem_map.h"
 #include "anomaly.h"
 
 #ifdef CONFIG_BF542

arch/blackfin/mach-bf548/include/mach/mem_map.h

 /*
- * file:         include/asm-blackfin/mach-bf548/mem_map.h
- * based on:
- * author:
+ * BF548 memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_548_H_
-#define _MEM_MAP_548_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
@@ -103,15 +81,4 @@
 # define L2_LENGTH          0x20000
 #endif
 
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif/* _MEM_MAP_548_H_ */
+#endif

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -62,7 +62,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,

arch/blackfin/mach-bf561/include/mach/blackfin.h

@@ -34,7 +34,6 @@
 #define BF561_FAMILY
 
 #include "bf561.h"
-#include "mem_map.h"
 #include "defBF561.h"
 #include "anomaly.h"
 

arch/blackfin/mach-bf561/include/mach/mem_map.h

 /*
- * Memory MAP
- * Common header file for blackfin BF561 of processors.
+ * BF561 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_561_H_
-#define _MEM_MAP_561_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
@@ -82,9 +85,6 @@
 #define COREA_L1_SCRATCH_START	0xFFB00000
 #define COREB_L1_SCRATCH_START	0xFF700000
 
-#define L1_SCRATCH_START	COREA_L1_SCRATCH_START
-#define L1_SCRATCH_LENGTH	0x1000
-
 #ifdef __ASSEMBLY__
 
 /*
@@ -155,14 +155,42 @@
 	dreg = ROT dreg BY -1;		\
 	dreg = CC;
 
-#else
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
+}
+static inline unsigned long get_l1_code_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START;
+}
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
+}
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
+}
+
+static inline unsigned long get_l1_scratch_start(void)
+{
+	return get_l1_scratch_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_code_start(void)
+{
+	return get_l1_code_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_a_start(void)
+{
+	return get_l1_data_a_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_b_start(void)
+{
+	return get_l1_data_b_start_cpu(blackfin_core_id());
+}
 
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
 #endif /* CONFIG_SMP */
 
 #endif /* __ASSEMBLY__ */
 
-#endif				/* _MEM_MAP_533_H_ */
+#endif

arch/blackfin/mach-common/arch_checks.c

@@ -74,7 +74,7 @@
 
 /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
 #if ANOMALY_05000220 && \
-	((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
-	 (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
+	((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
+	 (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
 # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
 #endif

arch/blackfin/mach-common/cpufreq.c

@@ -141,7 +141,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 	sclk = get_sclk() / 1000;
 
 #if ANOMALY_05000273 || ANOMALY_05000274 || \
-	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
 	min_cclk = sclk * 2;
 #else
 	min_cclk = sclk;

arch/blackfin/mach-common/entry.S

@@ -1609,6 +1609,7 @@ ENTRY(_sys_call_table)
 	.long _sys_preadv
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
+	.long _sys_perf_counter_open
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/blackfin/mach-common/ints-priority.c

@@ -1052,35 +1052,34 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-		case IRQ_TIMER0:
-			set_irq_handler(irq, handle_percpu_irq);
-			break;
-#endif
 #ifdef CONFIG_SMP
 		case IRQ_SUPPLE_0:
 		case IRQ_SUPPLE_1:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
 #endif
-		default:
 #ifdef CONFIG_IPIPE
-			/*
-			 * We want internal interrupt sources to be
-			 * masked, because ISRs may trigger interrupts
-			 * recursively (e.g. DMA), but interrupts are
-			 * _not_ masked at CPU level. So let's handle
-			 * most of them as level interrupts, except
-			 * the timer interrupt which is special.
-			 */
-			if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
-				set_irq_handler(irq, handle_simple_irq);
-			else
-				set_irq_handler(irq, handle_level_irq);
+#ifndef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_TIMER0:
+			set_irq_handler(irq, handle_simple_irq);
+			break;
+#endif /* !CONFIG_TICKSOURCE_CORETMR */
+		case IRQ_CORETMR:
+			set_irq_handler(irq, handle_simple_irq);
+			break;
+		default:
+			set_irq_handler(irq, handle_level_irq);
+			break;
 #else /* !CONFIG_IPIPE */
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
+			set_irq_handler(irq, handle_percpu_irq);
+			break;
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+		default:
 			set_irq_handler(irq, handle_simple_irq);
-#endif /* !CONFIG_IPIPE */
 			break;
+#endif	/* !CONFIG_IPIPE */
 		}
 	}
 
@@ -1224,15 +1223,14 @@ __attribute__((l1_text))
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
 	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
-	struct ipipe_domain *this_domain = ipipe_current_domain;
+	struct ipipe_domain *this_domain = __ipipe_current_domain;
 	struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
 	struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
 	int irq, s;
 
-	if (likely(vec == EVT_IVTMR_P)) {
+	if (likely(vec == EVT_IVTMR_P))
 		irq = IRQ_CORETMR;
-
-	} else {
+	else {
 #if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
@@ -1262,12 +1260,11 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 				break;
 		}
 #endif
-
 		irq = ivg->irqno;
 	}
 
 	if (irq == IRQ_SYSTMR) {
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
+#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0)
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
 #endif
 		/* This is basically what we need from the register frame. */

arch/blackfin/mach-common/pm.c

@@ -132,7 +132,7 @@ int bf53x_resume_l1_mem(unsigned char *memptr)
 	return 0;
 }
 
-#ifdef CONFIG_BFIN_WB
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 static void flushinv_all_dcache(void)
 {
 	u32 way, bank, subbank, set;
@@ -175,7 +175,7 @@ static inline void dcache_disable(void)
 #ifdef CONFIG_BFIN_DCACHE
 	unsigned long ctrl;
 
-#ifdef CONFIG_BFIN_WB
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 	flushinv_all_dcache();
 #endif
 	SSYNC();

arch/blackfin/mm/init.c

@@ -160,7 +160,7 @@ void __init mem_init(void)
 
 	/* do not count in kernel image between _rambase and _ramstart */
 	reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
 	reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT;
 #endif