Commit d888a4c7 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)
  Blackfin: fix dma-mapping build errors
  Blackfin: hook up new perf_counter_open syscall
  Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction)
  Blackfin: fix early crash when booting on wrong cpu
  Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS
  Blackfin: drop unused ISP1760 port1_disable from board resources
  Blackfin: bf526-ezbrd: handle different SDRAM chips
  Blackfin: fix typo in TRAS define in mem_init.h header
  Blackfin: unify memory map headers
  Blackfin: stick the CPU name into boot image name
  Blackfin: update defconfigs
  Blackfin: decouple unrelated cache settings to get exact behavior
  Blackfin: update I-pipe patch level
  Blackfin: remove obsolete mcount support from I-pipe code
  Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline
  Blackfin: convert interrupt pipeline to irqflags
  Blackfin: allow people to select BF51x-0.1 silicon rev
  Blackfin: bf526-ezbrd: set SPI flash resources to SST device
  Blackfin: fix accidental reset in some boot modes
  Blackfin: abstract irq14 lowering in do_irq
  ...
parents 687d6809 42b86e06
......@@ -274,7 +274,7 @@ config BF_REV_0_0
config BF_REV_0_1
bool "0.1"
depends on (BF52x || (BF54x && !BF54xM))
depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_2
bool "0.2"
......@@ -358,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7
config MEM_MT48LC32M16A2TG_75
bool
depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
default y
config MEM_MT48LC32M8A2_75
......@@ -366,6 +366,11 @@ config MEM_MT48LC32M8A2_75
depends on (BFIN518F_EZBRD)
default y
config MEM_MT48H32M16LFCJ_75
bool
depends on (BFIN526_EZBRD)
default y
source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
......@@ -623,7 +628,6 @@ choice
config TICKSOURCE_GPTMR0
bool "Gptimer0 (SCLK domain)"
select BFIN_GPTIMERS
depends on !IPIPE
config TICKSOURCE_CORETMR
bool "Core timer (CCLK domain)"
......@@ -644,6 +648,7 @@ config CYCLES_CLOCKSOURCE
config GPTMR0_CLOCKSOURCE
bool "Use GPTimer0 as a clocksource (higher rating)"
select BFIN_GPTIMERS
depends on GENERIC_CLOCKEVENTS
depends on !TICKSOURCE_GPTMR0
......@@ -908,23 +913,41 @@ endchoice
comment "Cache Support"
config BFIN_ICACHE
bool "Enable ICACHE"
default y
config BFIN_ICACHE_LOCK
bool "Enable Instruction Cache Locking"
depends on BFIN_ICACHE
default n
config BFIN_EXTMEM_ICACHEABLE
bool "Enable ICACHE for external memory"
depends on BFIN_ICACHE
default y
config BFIN_L2_ICACHEABLE
bool "Enable ICACHE for L2 SRAM"
depends on BFIN_ICACHE
depends on BF54x || BF561
default n
config BFIN_DCACHE
bool "Enable DCACHE"
default y
config BFIN_DCACHE_BANKA
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
depends on BFIN_DCACHE && !BF531
default n
config BFIN_ICACHE_LOCK
bool "Enable Instruction Cache Locking"
choice
prompt "External memory cache policy"
config BFIN_EXTMEM_DCACHEABLE
bool "Enable DCACHE for external memory"
depends on BFIN_DCACHE
default BFIN_WB if !SMP
default BFIN_WT if SMP
config BFIN_WB
default y
choice
prompt "External memory DCACHE policy"
depends on BFIN_EXTMEM_DCACHEABLE
default BFIN_EXTMEM_WRITEBACK if !SMP
default BFIN_EXTMEM_WRITETHROUGH if SMP
config BFIN_EXTMEM_WRITEBACK
bool "Write back"
depends on !SMP
help
......@@ -942,7 +965,7 @@ config BFIN_WB
If you are unsure of the options and you want to be safe,
then go with Write Through.
config BFIN_WT
config BFIN_EXTMEM_WRITETHROUGH
bool "Write through"
help
Write Back Policy:
......@@ -961,23 +984,26 @@ config BFIN_WT
endchoice
config BFIN_L2_DCACHEABLE
bool "Enable DCACHE for L2 SRAM"
depends on BFIN_DCACHE
depends on BF54x || BF561
default n
choice
prompt "L2 SRAM cache policy"
depends on (BF54x || BF561)
default BFIN_L2_WT
config BFIN_L2_WB
prompt "L2 SRAM DCACHE policy"
depends on BFIN_L2_DCACHEABLE
default BFIN_L2_WRITEBACK
config BFIN_L2_WRITEBACK
bool "Write back"
depends on !SMP
config BFIN_L2_WT
config BFIN_L2_WRITETHROUGH
bool "Write through"
depends on !SMP
config BFIN_L2_NOT_CACHED
bool "Not cached"
endchoice
comment "Memory Protection Unit"
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
default n
......
......@@ -13,7 +13,7 @@ extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
-C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
-e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
-d $< $@
......
......@@ -326,11 +326,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -413,11 +419,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -916,7 +922,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_SDHCI is not set
CONFIG_SDH_BFIN=m
CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
......@@ -1147,7 +1153,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -331,16 +331,18 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Asynchonous Memory Configuration
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
# EBIU_AMGCTL Global Control
......@@ -418,11 +420,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1424,7 +1426,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -331,11 +331,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -418,11 +424,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1505,7 +1511,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -289,15 +289,24 @@ CONFIG_BFIN_GPTIMERS=m
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
#
# Cache Support
#
#
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -391,11 +400,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1052,7 +1061,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -293,11 +293,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -391,11 +397,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1216,7 +1222,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -300,11 +300,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -399,11 +405,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1269,7 +1275,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -311,11 +311,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -398,11 +404,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1203,7 +1209,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -366,14 +366,19 @@ CONFIG_DMA_UNCACHED_2M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_WB is not set
CONFIG_BFIN_L2_WT=y
# CONFIG_BFIN_L2_NOT_CACHED is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
# CONFIG_BFIN_L2_ICACHEABLE is not set
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -459,11 +464,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1606,7 +1611,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -331,14 +331,19 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_WB is not set
CONFIG_BFIN_L2_WT=y
# CONFIG_BFIN_L2_NOT_CACHED is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
# CONFIG_BFIN_L2_ICACHEABLE is not set
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -425,11 +430,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1044,7 +1049,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -285,11 +285,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......
......@@ -329,11 +329,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -417,11 +423,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1246,7 +1252,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
......
......@@ -262,12 +262,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -353,10 +358,10 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -873,7 +878,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
......
......@@ -297,11 +297,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -383,11 +389,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -861,7 +867,7 @@ CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
......
......@@ -270,12 +270,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -361,10 +366,10 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -901,7 +906,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
......
......@@ -333,12 +333,19 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
# CONFIG_BFIN_L2_ICACHEABLE is not set
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -428,11 +435,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -1334,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
......
......@@ -308,12 +308,19 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
# CONFIG_BFIN_L2_ICACHEABLE is not set
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -395,11 +402,11 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......@@ -837,7 +844,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
......
......@@ -258,12 +258,18 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
CONFIG_BFIN_ICACHE_LOCK=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
# Asynchonous Memory Configuration
......
......@@ -295,11 +295,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -382,11 +388,11 @@ CONFIG_IP_PNP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
......
......@@ -279,12 +279,18 @@ CONFIG_DMA_UNCACHED_2M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
# Asynchonous Memory Configuration
......
......@@ -287,11 +287,17 @@ CONFIG_DMA_UNCACHED_1M=y
# Cache Support
#
CONFIG_BFIN_ICACHE=y
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
# Memory Protection Unit
#
# CONFIG_MPU is not set
#
......@@ -709,7 +715,7 @@ CONFIG_FRAME_WARN=1024
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
......
......@@ -86,6 +86,7 @@ static inline void CSYNC(void)
#endif /* __ASSEMBLY__ */
#include <asm/mem_map.h>
#include <mach/blackfin.h>
#include <asm/bfin-global.h>
......
......@@ -35,10 +35,10 @@
#if defined(CONFIG_SMP) && \
!defined(CONFIG_BFIN_CACHE_COHERENT)
# if defined(CONFIG_BFIN_ICACHE)
# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
# define __ARCH_SYNC_CORE_ICACHE
# endif
# if defined(CONFIG_BFIN_DCACHE)
# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
# define __ARCH_SYNC_CORE_DCACHE
# endif
#ifndef __ASSEMBLY__
......
......@@ -56,7 +56,7 @@ extern void blackfin_invalidate_entire_icache(void);
static inline void flush_icache_range(unsigned start, unsigned end)
{
#if defined(CONFIG_BFIN_WB)
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
blackfin_dcache_flush_range(start, end);
#endif
......@@ -87,7 +87,7 @@ do { memcpy(dst, src, len); \
#else
# define invalidate_dcache_range(start,end) do { } while (0)
#endif
#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB)
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
# define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end))
# define flush_dcache_page(page) blackfin_dflush_page(page_address(page))
#else
......@@ -100,7 +100,7 @@ extern unsigned long reserved_mem_icache_on;
static inline int bfin_addr_dcacheable(unsigned long addr)
{
#ifdef CONFIG_BFIN_DCACHE
#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
if (addr < (_ramend - DMA_UNCACHED_REGION))
return 1;
#endif
......@@ -109,7 +109,7 @@ static inline int bfin_addr_dcacheable(unsigned long addr)
addr >= _ramend && addr < physical_mem_end)
return 1;
#ifndef CONFIG_BFIN_L2_NOT_CACHED
#ifdef CONFIG_BFIN_L2_DCACHEABLE
if (addr >= L2_START && addr < L2_START + L2_LENGTH)
return 1;
#endif
......
......@@ -37,8 +37,6 @@
#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/
#if ANOMALY_05000158
#define ANOMALY_05000158_WORKAROUND 0x200
#else
......@@ -47,10 +45,12 @@
#define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
#ifdef CONFIG_BFIN_WB /*Write Back Policy */
#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK
#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON)
#else /*Write Through */
#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON)
#else
#define SDRAM_DGENERIC (CPLB_COMMON)
#endif
#define SDRAM_DNON_CHBL (CPLB_COMMON)
......@@ -61,21 +61,23 @@
#ifdef CONFIG_SMP
#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB)
#define L2_IMEMORY (CPLB_COMMON)
#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON)
#define L2_IMEMORY (CPLB_COMMON | PAGE_SIZE_1MB)
#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB)
#else
#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
#define L2_IMEMORY (SDRAM_IGENERIC)
# if defined(CONFIG_BFIN_L2_WB)
# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON)
# elif defined(CONFIG_BFIN_L2_WT)
# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON)
# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
# define L2_DMEMORY (CPLB_COMMON)
# if defined(CONFIG_BFIN_L2_ICACHEABLE)
# define L2_IMEMORY (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
# else
# define L2_IMEMORY ( CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
# endif
# if defined(CONFIG_BFIN_L2_WRITEBACK)
# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB)
# elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB)
# else
# define L2_DMEMORY (0)
# define L2_DMEMORY (CPLB_COMMON | PAGE_SIZE_1MB)
# endif
#endif /* CONFIG_SMP */
......
......@@ -95,4 +95,17 @@ static inline void dma_sync_single_for_device(struct device *dev,
enum dma_data_direction dir)
{
}
static inline void dma_sync_sg_for_cpu(struct device *dev,
struct scatterlist *sg,
int nents, enum dma_data_direction dir)
{
}
static inline void dma_sync_sg_for_device(struct device *dev,
struct scatterlist *sg,
int nents, enum dma_data_direction dir)
{
}
#endif /* _BLACKFIN_DMA_MAPPING_H */
......@@ -35,9 +35,9 @@
#include <asm/atomic.h>
#include <asm/traps.h>
#define IPIPE_ARCH_STRING "1.10-00"
#define IPIPE_ARCH_STRING "1.11-00"
#define IPIPE_MAJOR_NUMBER 1
#define IPIPE_MINOR_NUMBER 10
#define IPIPE_MINOR_NUMBER 11
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
......@@ -207,7 +207,7 @@ void ipipe_init_irq_threads(void);
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#ifdef CONFIG_GENERIC_CLOCKEVENTS
#ifdef CONFIG_TICKSOURCE_CORETMR
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
#else
......@@ -240,8 +240,13 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#define ipipe_init_irq_threads() do { } while (0)
#define ipipe_start_irq_thread(irq, desc) 0
#ifndef CONFIG_TICKSOURCE_GPTMR0
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
#endif
#define __ipipe_root_tick_p(regs) 1
......
......@@ -51,23 +51,23 @@
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
static inline void __ipipe_stall_root(void)
{
volatile unsigned long *p = &__ipipe_root_status;
set_bit(0, p);
}
#define __ipipe_stall_root() \
do { \
volatile unsigned long *p = &__ipipe_root_status; \
set_bit(0, p); \
} while (0)
static inline unsigned long __ipipe_test_and_stall_root(void)
{
volatile unsigned long *p = &__ipipe_root_status;
return test_and_set_bit(0, p);
}
#define __ipipe_test_and_stall_root() \
({ \
volatile unsigned long *p = &__ipipe_root_status; \
test_and_set_bit(0, p); \
})
static inline unsigned long __ipipe_test_root(void)
{
const unsigned long *p = &__ipipe_root_status;
return test_bit(0, p);
}
#define __ipipe_test_root() \
({ \
const unsigned long *p = &__ipipe_root_status; \
test_bit(0, p); \
})
#endif /* !__ASSEMBLY__ */
......
......@@ -22,13 +22,6 @@
/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
#include <mach/irq.h>
/* Xenomai IPIPE helpers */
#define local_irq_restore_hw(x) local_irq_restore(x)
#define local_irq_save_hw(x) local_irq_save(x)
#define local_irq_enable_hw(x) local_irq_enable(x)
#define local_irq_disable_hw(x) local_irq_disable(x)
#define irqs_disabled_hw(x) irqs_disabled(x)
#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
#else
......
......@@ -31,6 +31,150 @@ static inline unsigned long bfin_cli(void)
return flags;
}
#ifdef CONFIG_IPIPE
#include <linux/ipipe_base.h>
#include <linux/ipipe_trace.h>
#ifdef CONFIG_DEBUG_HWERR
# define bfin_no_irqs 0x3f
#else
# define bfin_no_irqs 0x1f
#endif
#define raw_local_irq_disable() \
do { \
ipipe_check_context(ipipe_root_domain); \
__ipipe_stall_root(); \
barrier(); \
} while (0)
static inline void raw_local_irq_enable(void)
{
barrier();
ipipe_check_context(ipipe_root_domain);
__ipipe_unstall_root();
}
#define raw_local_save_flags_ptr(x) \
do { \
*(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \
} while (0)
#define raw_local_save_flags(x) raw_local_save_flags_ptr(&(x))
#define raw_irqs_disabled_flags(x) ((x) == bfin_no_irqs)
#define raw_local_irq_save_ptr(x) \
do { \
*(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \
barrier(); \
} while (0)
#define raw_local_irq_save(x) \
do { \
ipipe_check_context(ipipe_root_domain); \
raw_local_irq_save_ptr(&(x)); \
} while (0)
static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
{
/*
* Merge virtual and real interrupt mask bits into a single
* 32bit word.
*/
return (real & ~(1 << 31)) | ((virt != 0) << 31);
}
static inline int raw_demangle_irq_bits(unsigned long *x)
{
int virt = (*x & (1 << 31)) != 0;
*x &= ~(1L << 31);
return virt;
}
static inline void local_irq_disable_hw_notrace(void)
{
bfin_cli();
}
static inline void local_irq_enable_hw_notrace(void)
{
bfin_sti(bfin_irq_flags);
}
#define local_save_flags_hw(flags) \
do { \
(flags) = bfin_read_IMASK(); \
} while (0)
#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0)
#define irqs_disabled_hw() \
({ \
unsigned long flags; \
local_save_flags_hw(flags); \
irqs_disabled_flags_hw(flags); \
})
static inline void local_irq_save_ptr_hw(unsigned long *flags)
{
*flags = bfin_cli();
#ifdef CONFIG_DEBUG_HWERR
bfin_sti(0x3f);
#endif
}
#define local_irq_save_hw_notrace(flags) \
do { \
local_irq_save_ptr_hw(&(flags)); \
} while (0)
static inline void local_irq_restore_hw_notrace(unsigned long flags)
{
if (!irqs_disabled_flags_hw(flags))
local_irq_enable_hw_notrace();
}
#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
# define local_irq_disable_hw() \
do { \
if (!irqs_disabled_hw()) { \
local_irq_disable_hw_notrace(); \
ipipe_trace_begin(0x80000000); \
} \
} while (0)
# define local_irq_enable_hw() \
do { \
if (irqs_disabled_hw()) { \
ipipe_trace_end(0x80000000); \
local_irq_enable_hw_notrace(); \
} \
} while (0)
# define local_irq_save_hw(flags) \
do { \
local_save_flags_hw(flags); \
if (!irqs_disabled_flags_hw(flags)) { \
local_irq_disable_hw_notrace(); \
ipipe_trace_begin(0x80000001); \
} \
} while (0)
# define local_irq_restore_hw(flags) \
do { \
if (!irqs_disabled_flags_hw(flags)) { \
ipipe_trace_end(0x80000001); \
local_irq_enable_hw_notrace(); \
} \
} while (0)
#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */
# define local_irq_disable_hw() local_irq_disable_hw_notrace()
# define local_irq_enable_hw() local_irq_enable_hw_notrace()
# define local_irq_save_hw(flags) local_irq_save_hw_notrace(flags)
# define local_irq_restore_hw(flags) local_irq_restore_hw_notrace(flags)
#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
#else /* CONFIG_IPIPE */
static inline void raw_local_irq_disable(void)
{
bfin_cli();
......@@ -44,12 +188,6 @@ static inline void raw_local_irq_enable(void)
#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
static inline void raw_local_irq_restore(unsigned long flags)
{
if (!raw_irqs_disabled_flags(flags))
raw_local_irq_enable();
}
static inline unsigned long __raw_local_irq_save(void)
{
unsigned long flags = bfin_cli();
......@@ -60,4 +198,18 @@ static inline unsigned long __raw_local_irq_save(void)
}
#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
#define local_irq_save_hw(flags) raw_local_irq_save(flags)
#define local_irq_restore_hw(flags) raw_local_irq_restore(flags)
#define local_irq_enable_hw() raw_local_irq_enable()
#define local_irq_disable_hw() raw_local_irq_disable()
#define irqs_disabled_hw() irqs_disabled()
#endif /* !CONFIG_IPIPE */
static inline void raw_local_irq_restore(unsigned long flags)
{
if (!raw_irqs_disabled_flags(flags))
raw_local_irq_enable();
}
#endif
......@@ -59,7 +59,7 @@
#define SDRAM_tRP TRP_1
#define SDRAM_tRP_num 1
#define SDRAM_tRAS TRAS_4
#define SDRAM_tRAS_num 3
#define SDRAM_tRAS_num 4
#define SDRAM_tRCD TRCD_1
#define SDRAM_tWR TWR_2
#endif
......@@ -89,6 +89,85 @@
#endif
#endif
/*
* The BF526-EZ-Board changed SDRAM chips between revisions,
* so we use below timings to accommodate both.
*/
#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
#if (CONFIG_SCLK_HZ > 119402985)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_8
#define SDRAM_tRAS_num 8
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_7
#define SDRAM_tRAS_num 7
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_6
#define SDRAM_tRAS_num 6
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_5
#define SDRAM_tRAS_num 5
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_4
#define SDRAM_tRAS_num 4
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_4
#define SDRAM_tRAS_num 4
#define SDRAM_tRCD TRCD_1
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_3
#define SDRAM_tRAS_num 3
#define SDRAM_tRCD TRCD_1
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
#define SDRAM_tRP TRP_1
#define SDRAM_tRP_num 1
#define SDRAM_tRAS TRAS_3
#define SDRAM_tRAS_num 3
#define SDRAM_tRCD TRCD_1
#define SDRAM_tWR TWR_2
#endif
#if (CONFIG_SCLK_HZ <= 29850746)
#define SDRAM_tRP TRP_1
#define SDRAM_tRP_num 1
#define SDRAM_tRAS TRAS_2
#define SDRAM_tRAS_num 2
#define SDRAM_tRCD TRCD_1
#define SDRAM_tWR TWR_2
#endif
#endif
#if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
defined(CONFIG_MEM_MT48LC8M32B2B5_7)
/*SDRAM INFORMATION: */
......@@ -109,6 +188,13 @@
#define SDRAM_CL CL_3
#endif
#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
/*SDRAM INFORMATION: */
#define SDRAM_Tref 64 /* Refresh period in milliseconds */
#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
#define SDRAM_CL CL_2
#endif
#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
/* Equation from section 17 (p17-46) of BF533 HRM */
......
/*
* mem_map.h
* Common header file for blackfin family of processors.
* Common Blackfin memory map
*
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_H_
#define _MEM_MAP_H_
#ifndef __BFIN_MEM_MAP_H__
#define __BFIN_MEM_MAP_H__
#include <mach/mem_map.h>
#ifndef __ASSEMBLY__
/* Every Blackfin so far has MMRs like this */
#ifndef COREMMR_BASE
# define COREMMR_BASE 0xFFE00000
#endif
#ifndef SYSMMR_BASE
# define SYSMMR_BASE 0xFFC00000
#endif
#ifdef CONFIG_SMP
static inline ulong get_l1_scratch_start_cpu(int cpu)
{
return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
}
static inline ulong get_l1_code_start_cpu(int cpu)
{
return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START;
}
static inline ulong get_l1_data_a_start_cpu(int cpu)
{
return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
}
static inline ulong get_l1_data_b_start_cpu(int cpu)
{
return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
}
/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */
#ifndef L1_SCRATCH_START
# define L1_SCRATCH_START 0xFFB00000
# define L1_SCRATCH_LENGTH 0x1000
#endif
static inline ulong get_l1_scratch_start(void)
{
return get_l1_scratch_start_cpu(blackfin_core_id());
}
static inline ulong get_l1_code_start(void)
{
return get_l1_code_start_cpu(blackfin_core_id());
}
static inline ulong get_l1_data_a_start(void)
{
return get_l1_data_a_start_cpu(blackfin_core_id());
}
static inline ulong get_l1_data_b_start(void)
{
return get_l1_data_b_start_cpu(blackfin_core_id());
}
/* Most parts lack on-chip L2 SRAM */
#ifndef L2_START
# define L2_START 0
# define L2_LENGTH 0
#endif
/* Most parts lack on-chip L1 ROM */
#ifndef L1_ROM_START
# define L1_ROM_START 0
# define L1_ROM_LENGTH 0
#endif
/* Allow wonky SMP ports to override this */
#ifndef GET_PDA_SAFE
# define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#else /* !CONFIG_SMP */
# ifndef __ASSEMBLY__
static inline ulong get_l1_scratch_start_cpu(int cpu)
static inline unsigned long get_l1_scratch_start_cpu(int cpu)
{
return L1_SCRATCH_START;
}
static inline ulong get_l1_code_start_cpu(int cpu)
static inline unsigned long get_l1_code_start_cpu(int cpu)
{
return L1_CODE_START;
}
static inline ulong get_l1_data_a_start_cpu(int cpu)
static inline unsigned long get_l1_data_a_start_cpu(int cpu)
{
return L1_DATA_A_START;
}
static inline ulong get_l1_data_b_start_cpu(int cpu)
static inline unsigned long get_l1_data_b_start_cpu(int cpu)
{
return L1_DATA_B_START;
}
static inline ulong get_l1_scratch_start(void)
static inline unsigned long get_l1_scratch_start(void)
{
return get_l1_scratch_start_cpu(0);
}
static inline ulong get_l1_code_start(void)
static inline unsigned long get_l1_code_start(void)
{
return get_l1_code_start_cpu(0);
}
static inline ulong get_l1_data_a_start(void)
static inline unsigned long get_l1_data_a_start(void)
{
return get_l1_data_a_start_cpu(0);
}
static inline ulong get_l1_data_b_start(void)
static inline unsigned long get_l1_data_b_start(void)
{
return get_l1_data_b_start_cpu(0);
}
#endif /* CONFIG_SMP */
#endif /* __ASSEMBLY__ */
# endif /* __ASSEMBLY__ */
#endif /* !GET_PDA_SAFE */
#endif /* _MEM_MAP_H_ */
#endif
......@@ -135,11 +135,13 @@ struct __xchg_dummy {
};
#define __xg(x) ((volatile struct __xchg_dummy *)(x))
#include <mach/blackfin.h>
static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
int size)
{
unsigned long tmp = 0;
unsigned long flags = 0;
unsigned long flags;
local_irq_save_hw(flags);
......
......@@ -111,9 +111,7 @@
level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
#define EXC_0x2A(level) \
"Instruction fetch misaligned address violation\n" \
level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \
level " exception, the return address provided in RETX is the destination address which is\n" \
level " misaligned, rather than the address of the offending instruction.\n"
level " - Attempted misaligned instruction cache fetch.\n"
#define EXC_0x2B(level) \
"CPLB protection violation\n" \
level " - Illegal instruction fetch access (memory protection violation).\n"
......
......@@ -265,4 +265,26 @@ __clear_user(void *to, unsigned long n)
#define clear_user(to, n) __clear_user(to, n)
/* How to interpret these return values:
* CORE: can be accessed by core load or dma memcpy
* CORE_ONLY: can only be accessed by core load
* DMA: can only be accessed by dma memcpy
* IDMA: can only be accessed by interprocessor dma memcpy (BF561)
* ITEST: can be accessed by isram memcpy or dma memcpy
*/
enum {
BFIN_MEM_ACCESS_CORE = 0,
BFIN_MEM_ACCESS_CORE_ONLY,
BFIN_MEM_ACCESS_DMA,
BFIN_MEM_ACCESS_IDMA,
BFIN_MEM_ACCESS_ITEST,
};
/**
* bfin_mem_access_type() - what kind of memory access is required
* @addr: the address to check
* @size: number of bytes needed
* @return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
*/
int bfin_mem_access_type(unsigned long addr, unsigned long size);
#endif /* _BLACKFIN_UACCESS_H */
......@@ -381,8 +381,9 @@
#define __NR_preadv 366
#define __NR_pwritev 367
#define __NR_rt_tgsigqueueinfo 368
#define __NR_perf_counter_open 369
#define __NR_syscall 369
#define __NR_syscall 370
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
......
......@@ -20,7 +20,6 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
CFLAGS_REMOVE_ftrace.o = -pg
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
......
......@@ -46,13 +46,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n");
#ifdef CONFIG_BFIN_ICACHE
#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
#endif
#ifdef CONFIG_BFIN_DCACHE
#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
d_cache = CPLB_L1_CHBL;
#ifdef CONFIG_BFIN_WT
#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
d_cache |= CPLB_L1_AOW | CPLB_WT;
#endif
#endif
......@@ -91,9 +91,9 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
/* Cover L2 memory */
#if L2_LENGTH > 0
dcplb_tbl[cpu][i_d].addr = L2_START;
dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
dcplb_tbl[cpu][i_d++].data = L2_DMEMORY;
icplb_tbl[cpu][i_i].addr = L2_START;
icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
icplb_tbl[cpu][i_i++].data = L2_IMEMORY;
#endif
first_mask_dcplb = i_d;
......
......@@ -150,15 +150,19 @@ static noinline int dcplb_miss(unsigned int cpu)
nr_dcplb_miss[cpu]++;
d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
#ifdef CONFIG_BFIN_DCACHE
#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
if (bfin_addr_dcacheable(addr)) {
d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
#ifdef CONFIG_BFIN_WT
# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
d_data |= CPLB_L1_AOW | CPLB_WT;
#endif
# endif
}
#endif
if (addr >= physical_mem_end) {
if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
addr = L2_START;
d_data = L2_DMEMORY;
} else if (addr >= physical_mem_end) {
if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE
&& (status & FAULT_USERSUPV)) {
addr &= ~0x3fffff;
......@@ -235,7 +239,7 @@ static noinline int icplb_miss(unsigned int cpu)
i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
#ifdef CONFIG_BFIN_ICACHE
#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
/*
* Normal RAM, and possibly the reserved memory area, are
* cacheable.
......@@ -245,7 +249,10 @@ static noinline int icplb_miss(unsigned int cpu)
i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
#endif
if (addr >= physical_mem_end) {
if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
addr = L2_START;
i_data = L2_IMEMORY;
} else if (addr >= physical_mem_end) {
if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
&& (status & FAULT_USERSUPV)) {
addr &= ~(1 * 1024 * 1024 - 1);
......@@ -365,13 +372,18 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
local_irq_save_hw(flags);
current_rwx_mask[cpu] = masks;
if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
addr = L2_START;
d_data = L2_DMEMORY;
} else {
d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
#ifdef CONFIG_BFIN_DCACHE
#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
d_data |= CPLB_L1_CHBL;
#ifdef CONFIG_BFIN_WT
# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
d_data |= CPLB_L1_AOW | CPLB_WT;
# endif
#endif
#endif
}
disable_dcplb();
for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
......
......@@ -52,7 +52,7 @@ EXPORT_SYMBOL(__ipipe_freq_scale);
atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags;
unsigned long __ipipe_irq_lvmask = bfin_no_irqs;
EXPORT_SYMBOL(__ipipe_irq_lvmask);
static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc)
......@@ -342,8 +342,3 @@ void ___ipipe_sync_pipeline(unsigned long syncmask)
}
EXPORT_SYMBOL(show_stack);
#ifdef CONFIG_IPIPE_TRACE_MCOUNT
void notrace _mcount(void);
EXPORT_SYMBOL(_mcount);
#endif /* CONFIG_IPIPE_TRACE_MCOUNT */
......@@ -38,38 +38,15 @@
#include <asm/pda.h>
static atomic_t irq_err_count;
static spinlock_t irq_controller_lock;
/*
* Dummy mask/unmask handler
*/
void dummy_mask_unmask_irq(unsigned int irq)
{
}
void ack_bad_irq(unsigned int irq)
{
atomic_inc(&irq_err_count);
printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
}
static struct irq_chip bad_chip = {
.ack = dummy_mask_unmask_irq,
.mask = dummy_mask_unmask_irq,
.unmask = dummy_mask_unmask_irq,
};
static int bad_stats;
static struct irq_desc bad_irq_desc = {
.status = IRQ_DISABLED,
.chip = &bad_chip,
.handle_irq = handle_bad_irq,
.depth = 1,
.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
.kstat_irqs = &bad_stats,
#ifdef CONFIG_SMP
.affinity = CPU_MASK_ALL
#endif
};
#ifdef CONFIG_CPUMASK_OFFSTACK
......@@ -77,6 +54,7 @@ static struct irq_desc bad_irq_desc = {
#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
#ifdef CONFIG_PROC_FS
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
......@@ -108,50 +86,29 @@ int show_interrupts(struct seq_file *p, void *v)
}
return 0;
}
/*
* do_IRQ handles all hardware IRQs. Decoded IRQs should not
* come via this function. Instead, they should provide their
* own 'handler'
*/
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs;
struct irq_desc *desc = irq_desc + irq;
#ifndef CONFIG_IPIPE
unsigned short pending, other_ints;
#endif
old_regs = set_irq_regs(regs);
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (irq >= NR_IRQS)
desc = &bad_irq_desc;
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
static void check_stack_overflow(int irq)
{
/* Debugging check for stack overflow: is there less than STACK_WARN free? */
{
long sp;
sp = __get_SP() & (THREAD_SIZE-1);
long sp = __get_SP() & (THREAD_SIZE - 1);
if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
dump_stack();
printk(KERN_EMERG "%s: possible stack overflow while handling irq %i "
" only %ld bytes free\n",
__func__, irq, sp - sizeof(struct thread_info));
}
pr_emerg("irq%i: possible stack overflow only %ld bytes free\n",
irq, sp - sizeof(struct thread_info));
}
}
#else
static inline void check_stack_overflow(int irq) { }
#endif
generic_handle_irq(irq);
#ifndef CONFIG_IPIPE
static void maybe_lower_to_irq14(void)
{
unsigned short pending, other_ints;
/*
* If we're the only interrupt running (ignoring IRQ15 which
* is for syscalls), lower our priority to IRQ14 so that
......@@ -165,7 +122,38 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
other_ints = pending & (pending - 1);
if (other_ints == 0)
lower_to_irq14();
#endif /* !CONFIG_IPIPE */
}
#else
static inline void maybe_lower_to_irq14(void) { }
#endif
/*
* do_IRQ handles all hardware IRQs. Decoded IRQs should not
* come via this function. Instead, they should provide their
* own 'handler'
*/
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
check_stack_overflow(irq);
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (irq >= NR_IRQS)
handle_bad_irq(irq, &bad_irq_desc);
else
generic_handle_irq(irq);
maybe_lower_to_irq14();
irq_exit();
set_irq_regs(old_regs);
......@@ -173,14 +161,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
void __init init_IRQ(void)
{
struct irq_desc *desc;
int irq;
spin_lock_init(&irq_controller_lock);
for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
*desc = bad_irq_desc;
}
init_arch_irq();
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
......
......@@ -34,15 +34,6 @@ int gdb_bfin_vector = -1;
#error change the definition of slavecpulocks
#endif
#define IN_MEM(addr, size, l1_addr, l1_size) \
({ \
unsigned long __addr = (unsigned long)(addr); \
(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
})
#define ASYNC_BANK_SIZE \
(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
gdb_regs[BFIN_R0] = regs->r0;
......@@ -463,40 +454,87 @@ static int hex(char ch)
static int validate_memory_access_address(unsigned long addr, int size)
{
int cpu = raw_smp_processor_id();
if (size < 0)
if (size < 0 || addr == 0)
return -EFAULT;
if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
return 0;
if (addr >= SYSMMR_BASE)
return 0;
if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE))
return 0;
if (cpu == 0) {
if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return bfin_mem_access_type(addr, size);
}
static int bfin_probe_kernel_read(char *dst, char *src, int size)
{
unsigned long lsrc = (unsigned long)src;
int mem_type;
mem_type = validate_memory_access_address(lsrc, size);
if (mem_type < 0)
return mem_type;
if (lsrc >= SYSMMR_BASE) {
if (size == 2 && lsrc % 2 == 0) {
u16 mmr = bfin_read16(src);
memcpy(dst, &mmr, sizeof(mmr));
return 0;
if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH))
} else if (size == 4 && lsrc % 4 == 0) {
u32 mmr = bfin_read32(src);
memcpy(dst, &mmr, sizeof(mmr));
return 0;
if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
}
} else {
switch (mem_type) {
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
return probe_kernel_read(dst, src, size);
/* XXX: should support IDMA here with SMP */
case BFIN_MEM_ACCESS_DMA:
if (dma_memcpy(dst, src, size))
return 0;
if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
break;
case BFIN_MEM_ACCESS_ITEST:
if (isram_memcpy(dst, src, size))
return 0;
#ifdef CONFIG_SMP
} else if (cpu == 1) {
if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
break;
}
}
return -EFAULT;
}
static int bfin_probe_kernel_write(char *dst, char *src, int size)
{
unsigned long ldst = (unsigned long)dst;
int mem_type;
mem_type = validate_memory_access_address(ldst, size);
if (mem_type < 0)
return mem_type;
if (ldst >= SYSMMR_BASE) {
if (size == 2 && ldst % 2 == 0) {
u16 mmr;
memcpy(&mmr, src, sizeof(mmr));
bfin_write16(dst, mmr);
return 0;
if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
} else if (size == 4 && ldst % 4 == 0) {
u32 mmr;
memcpy(&mmr, src, sizeof(mmr));
bfin_write32(dst, mmr);
return 0;
if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
}
} else {
switch (mem_type) {
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
return probe_kernel_write(dst, src, size);
/* XXX: should support IDMA here with SMP */
case BFIN_MEM_ACCESS_DMA:
if (dma_memcpy(dst, src, size))
return 0;
if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
break;
case BFIN_MEM_ACCESS_ITEST:
if (isram_memcpy(dst, src, size))
return 0;
#endif
break;
}
}
if (IN_MEM(addr, size, L2_START, L2_LENGTH))
return 0;
return -EFAULT;
}
......@@ -509,14 +547,6 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
{
char *tmp;
int err;
unsigned char *pch;
unsigned short mmr16;
unsigned long mmr32;
int cpu = raw_smp_processor_id();
err = validate_memory_access_address((unsigned long)mem, count);
if (err)
return err;
/*
* We use the upper half of buf as an intermediate buffer for the
......@@ -524,44 +554,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
*/
tmp = buf + count;
if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
switch (count) {
case 2:
if ((unsigned int)mem % 2 == 0) {
mmr16 = *(unsigned short *)mem;
pch = (unsigned char *)&mmr16;
*tmp++ = *pch++;
*tmp++ = *pch++;
tmp -= 2;
} else
err = -EFAULT;
break;
case 4:
if ((unsigned int)mem % 4 == 0) {
mmr32 = *(unsigned long *)mem;
pch = (unsigned char *)&mmr32;
*tmp++ = *pch++;
*tmp++ = *pch++;
*tmp++ = *pch++;
*tmp++ = *pch++;
tmp -= 4;
} else
err = -EFAULT;
break;
default:
err = -EFAULT;
}
} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
#endif
) {
/* access L1 instruction SRAM*/
if (dma_memcpy(tmp, mem, count) == NULL)
err = -EFAULT;
} else
err = probe_kernel_read(tmp, mem, count);
err = bfin_probe_kernel_read(tmp, mem, count);
if (!err) {
while (count > 0) {
buf = pack_hex_byte(buf, *tmp);
......@@ -582,13 +575,8 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
*/
int kgdb_ebin2mem(char *buf, char *mem, int count)
{
char *tmp_old;
char *tmp_new;
unsigned short *mmr16;
unsigned long *mmr32;
int err;
char *tmp_old, *tmp_new;
int size;
int cpu = raw_smp_processor_id();
tmp_old = tmp_new = buf;
......@@ -601,41 +589,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
tmp_old++;
}
err = validate_memory_access_address((unsigned long)mem, size);
if (err)
return err;
if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
switch (size) {
case 2:
if ((unsigned int)mem % 2 == 0) {
mmr16 = (unsigned short *)buf;
*(unsigned short *)mem = *mmr16;
} else
err = -EFAULT;
break;
case 4:
if ((unsigned int)mem % 4 == 0) {
mmr32 = (unsigned long *)buf;
*(unsigned long *)mem = *mmr32;
} else
err = -EFAULT;
break;
default:
err = -EFAULT;
}
} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
#endif
) {
/* access L1 instruction SRAM */
if (dma_memcpy(mem, buf, size) == NULL)
err = -EFAULT;
} else
err = probe_kernel_write(mem, buf, size);
return err;
return bfin_probe_kernel_write(mem, buf, count);
}
/*
......@@ -645,16 +599,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
*/
int kgdb_hex2mem(char *buf, char *mem, int count)
{
char *tmp_raw;
char *tmp_hex;
unsigned short *mmr16;
unsigned long *mmr32;
int err;
int cpu = raw_smp_processor_id();
err = validate_memory_access_address((unsigned long)mem, count);
if (err)
return err;
char *tmp_raw, *tmp_hex;
/*
* We use the upper half of buf as an intermediate buffer for the
......@@ -669,39 +614,18 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
*tmp_raw |= hex(*tmp_hex--) << 4;
}
if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
switch (count) {
case 2:
if ((unsigned int)mem % 2 == 0) {
mmr16 = (unsigned short *)tmp_raw;
*(unsigned short *)mem = *mmr16;
} else
err = -EFAULT;
break;
case 4:
if ((unsigned int)mem % 4 == 0) {
mmr32 = (unsigned long *)tmp_raw;
*(unsigned long *)mem = *mmr32;
} else
err = -EFAULT;
break;
default:
err = -EFAULT;
}
} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
#endif
) {
/* access L1 instruction SRAM */
if (dma_memcpy(mem, tmp_raw, count) == NULL)
err = -EFAULT;
} else
err = probe_kernel_write(mem, tmp_raw, count);
return err;
return bfin_probe_kernel_write(mem, tmp_raw, count);
}
#define IN_MEM(addr, size, l1_addr, l1_size) \
({ \
unsigned long __addr = (unsigned long)(addr); \
(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
})
#define ASYNC_BANK_SIZE \
(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
int kgdb_validate_break_address(unsigned long addr)
{
int cpu = raw_smp_processor_id();
......@@ -724,46 +648,17 @@ int kgdb_validate_break_address(unsigned long addr)
int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
{
int err;
int cpu = raw_smp_processor_id();
if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
|| (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH))
#endif
) {
/* access L1 instruction SRAM */
if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE)
== NULL)
return -EFAULT;
if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr,
BREAK_INSTR_SIZE) == NULL)
return -EFAULT;
return 0;
} else {
err = probe_kernel_read(saved_instr, (char *)addr,
int err = bfin_probe_kernel_read(saved_instr, (char *)addr,
BREAK_INSTR_SIZE);
if (err)
return err;
return probe_kernel_write((char *)addr,
arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
}
return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
BREAK_INSTR_SIZE);
}
int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
{
if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) {
/* access L1 instruction SRAM */
if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL)
return -EFAULT;
return 0;
} else
return probe_kernel_write((char *)addr,
(char *)bundle, BREAK_INSTR_SIZE);
return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE);
}
int kgdb_arch_init(void)
......
/*
* linux/arch/blackfin/mcount.S
*
* Copyright (C) 2006 Analog Devices Inc.
*
* 2007/04/12 Save index, length, modify and base registers. --rpm
*/
#include <linux/linkage.h>
#include <asm/blackfin.h>
.text
.align 4 /* just in case */
ENTRY(__mcount)
[--sp] = i0;
[--sp] = i1;
[--sp] = i2;
[--sp] = i3;
[--sp] = l0;
[--sp] = l1;
[--sp] = l2;
[--sp] = l3;
[--sp] = m0;
[--sp] = m1;
[--sp] = m2;
[--sp] = m3;
[--sp] = b0;
[--sp] = b1;
[--sp] = b2;
[--sp] = b3;
[--sp] = ( r7:0, p5:0 );
[--sp] = ASTAT;
p1.L = _ipipe_trace_enable;
p1.H = _ipipe_trace_enable;
r7 = [p1];
CC = r7 == 0;
if CC jump out;
link 0x10;
r0 = 0x0;
[sp + 0xc] = r0; /* v */
r0 = 0x0; /* type: IPIPE_TRACE_FN */
r1 = rets;
p0 = [fp]; /* p0: Prior FP */
r2 = [p0 + 4]; /* r2: Prior RETS */
call ___ipipe_trace;
unlink;
out:
ASTAT = [sp++];
( r7:0, p5:0 ) = [sp++];
b3 = [sp++];
b2 = [sp++];
b1 = [sp++];
b0 = [sp++];
m3 = [sp++];
m2 = [sp++];
m1 = [sp++];
m0 = [sp++];
l3 = [sp++];
l2 = [sp++];
l1 = [sp++];
l0 = [sp++];
i3 = [sp++];
i2 = [sp++];
i1 = [sp++];
i0 = [sp++];
rts;
ENDPROC(__mcount)
......@@ -344,6 +344,87 @@ void finish_atomic_sections (struct pt_regs *regs)
}
}
static inline
int in_mem(unsigned long addr, unsigned long size,
unsigned long start, unsigned long end)
{
return addr >= start && addr + size <= end;
}
static inline
int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off,
unsigned long const_addr, unsigned long const_size)
{
return const_size &&
in_mem(addr, size, const_addr + off, const_addr + const_size);
}
static inline
int in_mem_const(unsigned long addr, unsigned long size,
unsigned long const_addr, unsigned long const_size)
{
return in_mem_const_off(addr, 0, size, const_addr, const_size);
}
#define IN_ASYNC(bnum, bctlnum) \
({ \
(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \
bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \
BFIN_MEM_ACCESS_CORE; \
})
int bfin_mem_access_type(unsigned long addr, unsigned long size)
{
int cpu = raw_smp_processor_id();
/* Check that things do not wrap around */
if (addr > ULONG_MAX - size)
return -EFAULT;
if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end))
return BFIN_MEM_ACCESS_CORE;
if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#ifdef COREB_L1_CODE_START
if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#endif
if (in_mem_const(addr, size, L2_START, L2_LENGTH))
return BFIN_MEM_ACCESS_CORE;
if (addr >= SYSMMR_BASE)
return BFIN_MEM_ACCESS_CORE_ONLY;
/* We can't read EBIU banks that aren't enabled or we end up hanging
* on the access to the async space.
*/
if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE))
return IN_ASYNC(0, 0);
if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE))
return IN_ASYNC(1, 0);
if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE))
return IN_ASYNC(2, 1);
if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE))
return IN_ASYNC(3, 1);
if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
return BFIN_MEM_ACCESS_CORE;
if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
return BFIN_MEM_ACCESS_DMA;
return -EFAULT;
}
#if defined(CONFIG_ACCESS_CHECK)
#ifdef CONFIG_ACCESS_OK_L1
__attribute__((l1_text))
......@@ -353,51 +434,61 @@ int _access_ok(unsigned long addr, unsigned long size)
{
if (size == 0)
return 1;
if (addr > (addr + size))
/* Check that things do not wrap around */
if (addr > ULONG_MAX - size)
return 0;
if (segment_eq(get_fs(), KERNEL_DS))
return 1;
#ifdef CONFIG_MTD_UCLINUX
if (addr >= memory_start && (addr + size) <= memory_end)
if (1)
#else
if (0)
#endif
{
if (in_mem(addr, size, memory_start, memory_end))
return 1;
if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
if (in_mem(addr, size, memory_mtd_end, physical_mem_end))
return 1;
#ifdef CONFIG_ROMFS_ON_MTD
# ifndef CONFIG_ROMFS_ON_MTD
if (0)
# endif
/* For XIP, allow user space to use pointers within the ROMFS. */
if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end)
if (in_mem(addr, size, memory_mtd_start, memory_mtd_end))
return 1;
#endif
#else
if (addr >= memory_start && (addr + size) <= physical_mem_end)
} else {
if (in_mem(addr, size, memory_start, physical_mem_end))
return 1;
#endif
if (addr >= (unsigned long)__init_begin &&
addr + size <= (unsigned long)__init_end)
}
if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end))
return 1;
if (addr >= get_l1_scratch_start()
&& addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH)
if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
return 1;
#if L1_CODE_LENGTH != 0
if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1)
&& addr + size <= get_l1_code_start() + L1_CODE_LENGTH)
if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH))
return 1;
#endif
#if L1_DATA_A_LENGTH != 0
if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1)
&& addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH)
if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH))
return 1;
#endif
#if L1_DATA_B_LENGTH != 0
if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1)
&& addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH)
if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
return 1;
#endif
#if L2_LENGTH != 0
if (addr >= L2_START + (_ebss_l2 - _stext_l2)
&& addr + size <= L2_START + L2_LENGTH)
#ifdef COREB_L1_CODE_START
if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
return 1;
#endif
if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
return 1;
if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
return 1;
if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
return 1;
return 0;
}
EXPORT_SYMBOL(_access_ok);
......
......@@ -117,15 +117,49 @@ void __cpuinit bfin_setup_caches(unsigned int cpu)
*/
#ifdef CONFIG_BFIN_ICACHE
printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
printk(KERN_INFO " External memory:"
# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
" cacheable"
# else
" uncacheable"
# endif
" in instruction cache\n");
if (L2_LENGTH)
printk(KERN_INFO " L2 SRAM :"
# ifdef CONFIG_BFIN_L2_ICACHEABLE
" cacheable"
# else
" uncacheable"
# endif
" in instruction cache\n");
#else
printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
#endif
#ifdef CONFIG_BFIN_DCACHE
printk(KERN_INFO "Data Cache Enabled for CPU%u"
# if defined CONFIG_BFIN_WB
" (write-back)"
# elif defined CONFIG_BFIN_WT
" (write-through)"
printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
printk(KERN_INFO " External memory:"
# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
" cacheable (write-back)"
# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
" cacheable (write-through)"
# else
" uncacheable"
# endif
" in data cache\n");
if (L2_LENGTH)
printk(KERN_INFO " L2 SRAM :"
# if defined CONFIG_BFIN_L2_WRITEBACK
" cacheable (write-back)"
# elif defined CONFIG_BFIN_L2_WRITETHROUGH
" cacheable (write-through)"
# else
" uncacheable"
# endif
"\n", cpu);
" in data cache\n");
#else
printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
#endif
}
......@@ -443,9 +477,11 @@ static __init void parse_cmdline_early(char *cmdline_p)
} else if (!memcmp(to, "clkin_hz=", 9)) {
to += 9;
early_init_clkin_hz(to);
#ifdef CONFIG_EARLY_PRINTK
} else if (!memcmp(to, "earlyprintk=", 12)) {
to += 12;
setup_early_printk(to);
#endif
} else if (!memcmp(to, "memmap=", 7)) {
to += 7;
parse_memmap(to);
......@@ -516,7 +552,7 @@ static __init void memory_setup(void)
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
# if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
......@@ -544,7 +580,7 @@ static __init void memory_setup(void)
dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
......@@ -764,6 +800,11 @@ void __init setup_arch(char **cmdline_p)
{
unsigned long sclk, cclk;
/* Check to make sure we are running on the right processor */
if (unlikely(CPUID != bfin_cpuid()))
printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
CPU, bfin_cpuid(), bfin_revid());
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
......@@ -778,14 +819,17 @@ void __init setup_arch(char **cmdline_p)
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
/* setup memory defaults from the user config */
physical_mem_end = 0;
_ramend = get_mem_size() * 1024 * 1024;
memset(&bfin_memmap, 0, sizeof(bfin_memmap));
/* If the user does not specify things on the command line, use
* what the bootloader set things up as
*/
physical_mem_end = 0;
parse_cmdline_early(&command_line[0]);
if (_ramend == 0)
_ramend = get_mem_size() * 1024 * 1024;
if (physical_mem_end == 0)
physical_mem_end = _ramend;
......@@ -837,7 +881,8 @@ void __init setup_arch(char **cmdline_p)
defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
#else
_bfin_swrst = bfin_read_SYSCR();
/* Clear boot mode field */
_bfin_swrst = bfin_read_SYSCR() & ~0xf;
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
......@@ -875,10 +920,7 @@ void __init setup_arch(char **cmdline_p)
else
printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
if (unlikely(CPUID != bfin_cpuid()))
printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
CPU, bfin_cpuid(), bfin_revid());
else {
if (likely(CPUID == bfin_cpuid())) {
if (bfin_revid() != bfin_compiled_revid()) {
if (bfin_compiled_revid() == -1)
printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
......@@ -1157,16 +1199,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
"-wb"
#elif defined CONFIG_BFIN_WT
"-wt"
#endif
"", 0);
"%d KB(L1 dcache) %d KB(L2 cache)\n",
icache_size, dcache_size, 0);
seq_printf(m, "%s\n", cache);
seq_printf(m, "external memory\t: "
#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
"cacheable"
#else
"uncacheable"
#endif
" in instruction cache\n");
seq_printf(m, "external memory\t: "
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
"cacheable (write-back)"
#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
"cacheable (write-through)"
#else
"uncacheable"
#endif
" in data cache\n");
if (icache_size)
seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
......@@ -1239,8 +1290,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
if (cpu_num != num_possible_cpus() - 1)
return 0;
if (L2_LENGTH)
if (L2_LENGTH) {
seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
seq_printf(m, "L2 SRAM\t\t: "
#if defined(CONFIG_BFIN_L2_ICACHEABLE)
"cacheable"
#else
"uncacheable"
#endif
" in instruction cache\n");
seq_printf(m, "L2 SRAM\t\t: "
#if defined(CONFIG_BFIN_L2_WRITEBACK)
"cacheable (write-back)"
#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
"cacheable (write-through)"
#else
"uncacheable"
#endif
" in data cache\n");
}
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
......
......@@ -37,6 +37,7 @@
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <linux/irq.h>
......@@ -636,57 +637,30 @@ asmlinkage void trap_c(struct pt_regs *fp)
*/
static bool get_instruction(unsigned short *val, unsigned short *address)
{
unsigned long addr;
addr = (unsigned long)address;
unsigned long addr = (unsigned long)address;
/* Check for odd addresses */
if (addr & 0x1)
return false;
/* Check that things do not wrap around */
if (addr > (addr + 2))
/* MMR region will never have instructions */
if (addr >= SYSMMR_BASE)
return false;
/*
* Since we are in exception context, we need to do a little address checking
* We need to make sure we are only accessing valid memory, and
* we don't read something in the async space that can hang forever
*/
if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
#if L2_LENGTH != 0
(addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
#endif
(addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
#if L1_DATA_A_LENGTH != 0
(addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
#endif
#if L1_DATA_B_LENGTH != 0
(addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
#endif
(addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
(!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
(!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
(!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
(!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
switch (bfin_mem_access_type(addr, 2)) {
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
*val = *address;
return true;
}
#if L1_CODE_LENGTH != 0
if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
case BFIN_MEM_ACCESS_DMA:
dma_memcpy(val, address, 2);
return true;
case BFIN_MEM_ACCESS_ITEST:
isram_memcpy(val, address, 2);
return true;
}
#endif
default: /* invalid access */
return false;
}
}
/*
......
......@@ -119,13 +119,19 @@ static struct platform_device bfin_mac_device = {
};
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
static struct dsa_chip_data ksz8893m_switch_chip_data = {
.mii_bus = &bfin_mii_bus.dev,
.port_names = {
NULL,
"eth%d",
"eth%d",
"cpu",
},
};
static struct dsa_platform_data ksz8893m_switch_data = {
.nr_chips = 1,
.netdev = &bfin_mac_device.dev,
.port_names[0] = NULL,
.port_names[1] = "eth%d",
.port_names[2] = "eth%d",
.port_names[3] = "cpu",
.chip = &ksz8893m_switch_chip_data,
};
static struct platform_device ksz8893m_switch_device = {
......
......@@ -7,7 +7,7 @@
*/
/* This file should be up to date with:
* - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
* - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
......@@ -18,7 +18,7 @@
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
......@@ -45,29 +45,31 @@
/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
#define ANOMALY_05000426 (1)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
#define ANOMALY_05000430 (1)
#define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (1)
/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
#define ANOMALY_05000435 (1)
#define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
/* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
#define ANOMALY_05000438 (1)
#define ANOMALY_05000438 (__SILICON_REVISION__ < 1)
/* Preboot Cannot be Used to Alter the PLL_DIV Register */
#define ANOMALY_05000439 (1)
#define ANOMALY_05000439 (__SILICON_REVISION__ < 1)
/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
#define ANOMALY_05000440 (1)
#define ANOMALY_05000440 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
#define ANOMALY_05000444 (1)
#define ANOMALY_05000444 (__SILICON_REVISION__ < 1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
#define ANOMALY_05000452 (1)
#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
/* PWM_TRIPB Signal Not Available on PG10 */
#define ANOMALY_05000453 (1)
#define ANOMALY_05000453 (__SILICON_REVISION__ < 1)
/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
#define ANOMALY_05000455 (1)
/* False Hardware Error when RETI points to invalid memory */
#define ANOMALY_05000455 (__SILICON_REVISION__ < 1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
#define ANOMALY_05000462 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
......@@ -78,24 +80,30 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000281 (0)
#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
......@@ -103,10 +111,13 @@
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
#define ANOMALY_05000357 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000389 (0)
......@@ -117,5 +128,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
#endif
......@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf518.h"
#include "mem_map.h"
#include "defBF512.h"
#include "anomaly.h"
......
/*
* file: include/asm-blackfin/mach-bf518/mem_map.h
* based on: include/asm-blackfin/mach-bf527/mem_map.h
* author: Bryan Wu <cooloney@kernel.org>
* BF51x memory map
*
* created:
* description:
* Memory MAP Common header file for blackfin BF518/6/4/2 of processors.
* rev:
*
* modified:
*
* bugs: enter bugs at http://blackfin.uclinux.org/
*
* this program is free software; you can redistribute it and/or modify
* it under the terms of the gnu general public license as published by
* the free software foundation; either version 2, or (at your option)
* any later version.
*
* this program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* merchantability or fitness for a particular purpose. see the
* gnu general public license for more details.
*
* you should have received a copy of the gnu general public license
* along with this program; see the file copying.
* if not, write to the free software foundation,
* 59 temple place - suite 330, boston, ma 02111-1307, usa.
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_518_H_
#define _MEM_MAP_518_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
......@@ -89,20 +67,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
/* Level 2 Memory - none */
#define L2_START 0
#define L2_LENGTH 0
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif /* _MEM_MAP_518_H_ */
#endif
......@@ -78,7 +78,6 @@ static struct resource bfin_isp1760_resources[] = {
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
.port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
......
......@@ -237,10 +237,10 @@ static struct flash_platform_data bfin_spi_flash_data = {
.name = "m25p80",
.parts = bfin_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
.type = "m25p16",
.type = "sst25wf040",
};
/* SPI flash chip (m25p64) */
/* SPI flash chip (sst25wf040) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
......
......@@ -77,7 +77,6 @@ static struct resource bfin_isp1760_resources[] = {
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
.port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
......
......@@ -34,7 +34,7 @@
#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
......@@ -184,8 +184,12 @@
#define ANOMALY_05000456 (1)
/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
#define ANOMALY_05000457 (1)
/* False Hardware Error when RETI points to invalid memory */
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* USB Rx DMA hang */
#define ANOMALY_05000465 (1)
/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
#define ANOMALY_05000467 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
......@@ -195,24 +199,30 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000281 (0)
#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
......@@ -220,6 +230,7 @@
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
......
......@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf527.h"
#include "mem_map.h"
#include "defBF522.h"
#include "anomaly.h"
......
/*
* file: include/asm-blackfin/mach-bf527/mem_map.h
* based on: include/asm-blackfin/mach-bf537/mem_map.h
* author: Michael Hennerich (michael.hennerich@analog.com)
* BF52x memory map
*
* created:
* description:
* Memory MAP Common header file for blackfin BF527/5/2 of processors.
* rev:
*
* modified:
*
* bugs: enter bugs at http://blackfin.uclinux.org/
*
* this program is free software; you can redistribute it and/or modify
* it under the terms of the gnu general public license as published by
* the free software foundation; either version 2, or (at your option)
* any later version.
*
* this program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* merchantability or fitness for a particular purpose. see the
* gnu general public license for more details.
*
* you should have received a copy of the gnu general public license
* along with this program; see the file copying.
* if not, write to the free software foundation,
* 59 temple place - suite 330, boston, ma 02111-1307, usa.
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_527_H_
#define _MEM_MAP_527_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
......@@ -89,20 +67,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
/* Level 2 Memory - none */
#define L2_START 0
#define L2_LENGTH 0
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif /* _MEM_MAP_527_H_ */
#endif
......@@ -32,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
......@@ -86,6 +87,101 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
static const char *map_probes[] = {
"stm_flash",
NULL,
};
static struct platdata_mtd_ram stm_pri_data_a = {
.mapname = "Flash A Primary",
.map_probes = map_probes,
.bankwidth = 2,
};
static struct resource stm_pri_resource_a = {
.start = 0x20000000,
.end = 0x200fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device stm_pri_device_a = {
.name = "mtd-ram",
.id = 0,
.dev = {
.platform_data = &stm_pri_data_a,
},
.num_resources = 1,
.resource = &stm_pri_resource_a,
};
static struct platdata_mtd_ram stm_pri_data_b = {
.mapname = "Flash B Primary",
.map_probes = map_probes,
.bankwidth = 2,
};
static struct resource stm_pri_resource_b = {
.start = 0x20100000,
.end = 0x201fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device stm_pri_device_b = {
.name = "mtd-ram",
.id = 4,
.dev = {
.platform_data = &stm_pri_data_b,
},
.num_resources = 1,
.resource = &stm_pri_resource_b,
};
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
static struct platdata_mtd_ram sram_data_a = {
.mapname = "Flash A SRAM",
.bankwidth = 2,
};
static struct resource sram_resource_a = {
.start = 0x20240000,
.end = 0x2024ffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device sram_device_a = {
.name = "mtd-ram",
.id = 8,
.dev = {
.platform_data = &sram_data_a,
},
.num_resources = 1,
.resource = &sram_resource_a,
};
static struct platdata_mtd_ram sram_data_b = {
.mapname = "Flash B SRAM",
.bankwidth = 2,
};
static struct resource sram_resource_b = {
.start = 0x202c0000,
.end = 0x202cffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device sram_device_b = {
.name = "mtd-ram",
.id = 9,
.dev = {
.platform_data = &sram_data_b,
},
.num_resources = 1,
.resource = &sram_resource_b,
};
#endif
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
......@@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
&stm_pri_device_a,
&stm_pri_device_b,
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
&sram_device_a,
&sram_device_b,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
......
......@@ -34,7 +34,6 @@
#define BF533_FAMILY
#include "bf533.h"
#include "mem_map.h"
#include "defBF532.h"
#include "anomaly.h"
......
/*
* File: include/asm-blackfin/mach-bf533/mem_map.h
* Based on:
* Author:
* BF533 memory map
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_533_H_
#define _MEM_MAP_533_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
......@@ -158,20 +136,4 @@
#endif
/* Level 2 Memory - none */
#define L2_START 0
#define L2_LENGTH 0
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif /* _MEM_MAP_533_H_ */
#endif
......@@ -79,7 +79,6 @@ static struct resource bfin_isp1760_resources[] = {
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
.port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
......
......@@ -34,13 +34,13 @@
# define ANOMALY_BF537 0
#endif
/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
#define ANOMALY_05000180 (1)
......@@ -50,11 +50,11 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
/* Buffered CLKIN Output Is Disabled by Default */
#define ANOMALY_05000247 (1)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
/* EMAC Tx DMA error after an early frame abort */
/* EMAC TX DMA Error After an Early Frame Abort */
#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
/* Maximum External Clock Speed for Timers */
#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
......@@ -62,7 +62,7 @@
#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
/* EMAC MDIO input latched on wrong MDC edge */
/* EMAC MDIO Input Latched on Wrong MDC Edge */
#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
......@@ -80,7 +80,7 @@
#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */
#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
......@@ -92,15 +92,15 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
/* SPI Master boot mode does not work well with Atmel Data flash devices */
/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */
#define ANOMALY_05000280 (1)
/* False Hardware Error Exception When ISR Context Is Not Restored */
/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */
#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
......@@ -112,25 +112,25 @@
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */
#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (1)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (1)
/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
/* EMAC RMII mode: collisions occur in Full Duplex mode */
/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */
#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */
#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
/* New Feature: UART Remains Enabled after UART Boot */
/* UART Gets Disabled after UART Boot */
#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
......@@ -154,7 +154,7 @@
#define ANOMALY_05000426 (1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI points to invalid memory */
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* Anomalies that don't exist on this proc */
......@@ -165,14 +165,17 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000266 (0)
......@@ -195,5 +198,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
#endif
......@@ -35,7 +35,6 @@
#define BF537_FAMILY
#include "bf537.h"
#include "mem_map.h"
#include "defBF534.h"
#include "anomaly.h"
......
/*
* file: include/asm-blackfin/mach-bf537/mem_map.h
* based on:
* author:
* BF537 memory map
*
* created:
* description:
* Memory MAP Common header file for blackfin BF537/6/4 of processors.
* rev:
*
* modified:
*
* bugs: enter bugs at http://blackfin.uclinux.org/
*
* this program is free software; you can redistribute it and/or modify
* it under the terms of the gnu general public license as published by
* the free software foundation; either version 2, or (at your option)
* any later version.
*
* this program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* merchantability or fitness for a particular purpose. see the
* gnu general public license for more details.
*
* you should have received a copy of the gnu general public license
* along with this program; see the file copying.
* if not, write to the free software foundation,
* 59 temple place - suite 330, boston, ma 02111-1307, usa.
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_537_H_
#define _MEM_MAP_537_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
......@@ -166,20 +144,4 @@
#endif
/* Level 2 Memory - none */
#define L2_START 0
#define L2_LENGTH 0
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif /* _MEM_MAP_537_H_ */
#endif
......@@ -30,13 +30,13 @@
# define ANOMALY_BF539 0
#endif
/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
#define ANOMALY_05000166 (1)
/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
#define ANOMALY_05000179 (1)
......@@ -70,11 +70,11 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
/* False Hardware Error Exception When ISR Context Is Not Restored */
/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
......@@ -92,11 +92,11 @@
#define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
/* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
......@@ -110,7 +110,7 @@
#define ANOMALY_05000371 (__SILICON_REVISION__ < 5)
/* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */
#define ANOMALY_05000374 (__SILICON_REVISION__ == 4)
/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */
/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
#define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
#define ANOMALY_05000402 (__SILICON_REVISION__ < 4)
......@@ -126,26 +126,32 @@
#define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI points to invalid memory */
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000120 (0)
#define ANOMALY_05000125 (0)
#define ANOMALY_05000149 (0)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
#define ANOMALY_05000254 (0)
#define ANOMALY_05000257 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000305 (0)
......@@ -166,5 +172,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
#endif
......@@ -35,7 +35,6 @@
#define BF538_FAMILY
#include "bf538.h"
#include "mem_map.h"
#include "defBF539.h"
#include "anomaly.h"
......
/*
* File: include/asm-blackfin/mach-bf538/mem_map.h
* Based on:
* Author:
* BF538 memory map
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_538_H_
#define _MEM_MAP_538_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
......@@ -93,21 +71,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE*/
/* Level 2 Memory - none */
#define L2_START 0
#define L2_LENGTH 0
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif /* _MEM_MAP_538_H_ */
#endif
......@@ -76,7 +76,6 @@ static struct resource bfin_isp1760_resources[] = {
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
.port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
......
......@@ -18,7 +18,7 @@
# error will not work on BF548 silicon version 0.0, or 0.1
#endif
/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
......@@ -30,17 +30,17 @@
#define ANOMALY_05000265 (1)
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
/* False Hardware Error Exception When ISR Context Is Not Restored */
/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
/* TWI Slave Boot Mode Is Not Functional */
#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
/* External FIFO Boot Mode Is Not Functional */
/* FIFO Boot Mode Not Functional */
#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
......@@ -178,8 +178,12 @@
#define ANOMALY_05000450 (1)
/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
/* False Hardware Error when RETI points to invalid memory */
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* USB Rx DMA hang */
#define ANOMALY_05000465 (1)
/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
#define ANOMALY_05000467 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
......@@ -189,30 +193,36 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
#define ANOMALY_05000254 (0)
#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000283 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
......
......@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf548.h"
#include "mem_map.h"
#include "anomaly.h"
#ifdef CONFIG_BF542
......
/*
* file: include/asm-blackfin/mach-bf548/mem_map.h
* based on:
* author:
* BF548 memory map
*
* created:
* description:
* Memory MAP Common header file for blackfin BF537/6/4 of processors.
* rev:
*
* modified:
*
* bugs: enter bugs at http://blackfin.uclinux.org/
*
* this program is free software; you can redistribute it and/or modify
* it under the terms of the gnu general public license as published by
* the free software foundation; either version 2, or (at your option)
* any later version.
*
* this program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* merchantability or fitness for a particular purpose. see the
* gnu general public license for more details.
*
* you should have received a copy of the gnu general public license
* along with this program; see the file copying.
* if not, write to the free software foundation,
* 59 temple place - suite 330, boston, ma 02111-1307, usa.
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_548_H_
#define _MEM_MAP_548_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */
......@@ -103,15 +81,4 @@
# define L2_LENGTH 0x20000
#endif
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif/* _MEM_MAP_548_H_ */
#endif
......@@ -62,7 +62,6 @@ static struct resource bfin_isp1760_resources[] = {
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
.port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
......
......@@ -34,7 +34,6 @@
#define BF561_FAMILY
#include "bf561.h"
#include "mem_map.h"
#include "defBF561.h"
#include "anomaly.h"
......
/*
* Memory MAP
* Common header file for blackfin BF561 of processors.
* BF561 memory map
*
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _MEM_MAP_561_H_
#define _MEM_MAP_561_H_
#ifndef __BFIN_MACH_MEM_MAP_H__
#define __BFIN_MACH_MEM_MAP_H__
#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
#ifndef __BFIN_MEM_MAP_H__
# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */
......@@ -82,9 +85,6 @@
#define COREA_L1_SCRATCH_START 0xFFB00000
#define COREB_L1_SCRATCH_START 0xFF700000
#define L1_SCRATCH_START COREA_L1_SCRATCH_START
#define L1_SCRATCH_LENGTH 0x1000
#ifdef __ASSEMBLY__
/*
......@@ -155,14 +155,42 @@
dreg = ROT dreg BY -1; \
dreg = CC;
#else
#define GET_PDA_SAFE(preg) \
preg.l = _cpu_pda; \
preg.h = _cpu_pda;
static inline unsigned long get_l1_scratch_start_cpu(int cpu)
{
return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
}
static inline unsigned long get_l1_code_start_cpu(int cpu)
{
return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START;
}
static inline unsigned long get_l1_data_a_start_cpu(int cpu)
{
return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
}
static inline unsigned long get_l1_data_b_start_cpu(int cpu)
{
return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
}
static inline unsigned long get_l1_scratch_start(void)
{
return get_l1_scratch_start_cpu(blackfin_core_id());
}
static inline unsigned long get_l1_code_start(void)
{
return get_l1_code_start_cpu(blackfin_core_id());
}
static inline unsigned long get_l1_data_a_start(void)
{
return get_l1_data_a_start_cpu(blackfin_core_id());
}
static inline unsigned long get_l1_data_b_start(void)
{
return get_l1_data_b_start_cpu(blackfin_core_id());
}
#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
#endif /* CONFIG_SMP */
#endif /* __ASSEMBLY__ */
#endif /* _MEM_MAP_533_H_ */
#endif
......@@ -74,7 +74,7 @@
/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
#if ANOMALY_05000220 && \
((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
(!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
(!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
#endif
......@@ -141,7 +141,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
sclk = get_sclk() / 1000;
#if ANOMALY_05000273 || ANOMALY_05000274 || \
(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
min_cclk = sclk * 2;
#else
min_cclk = sclk;
......
......@@ -1609,6 +1609,7 @@ ENTRY(_sys_call_table)
.long _sys_preadv
.long _sys_pwritev
.long _sys_rt_tgsigqueueinfo
.long _sys_perf_counter_open
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
......
......@@ -1052,35 +1052,34 @@ int __init init_arch_irq(void)
set_irq_chained_handler(irq, bfin_demux_error_irq);
break;
#endif
#if defined(CONFIG_TICKSOURCE_GPTMR0)
case IRQ_TIMER0:
set_irq_handler(irq, handle_percpu_irq);
break;
#endif
#ifdef CONFIG_SMP
case IRQ_SUPPLE_0:
case IRQ_SUPPLE_1:
set_irq_handler(irq, handle_percpu_irq);
break;
#endif
default:
#ifdef CONFIG_IPIPE
/*
* We want internal interrupt sources to be
* masked, because ISRs may trigger interrupts
* recursively (e.g. DMA), but interrupts are
* _not_ masked at CPU level. So let's handle
* most of them as level interrupts, except
* the timer interrupt which is special.
*/
if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
#ifndef CONFIG_TICKSOURCE_CORETMR
case IRQ_TIMER0:
set_irq_handler(irq, handle_simple_irq);
else
break;
#endif /* !CONFIG_TICKSOURCE_CORETMR */
case IRQ_CORETMR:
set_irq_handler(irq, handle_simple_irq);
break;
default:
set_irq_handler(irq, handle_level_irq);
break;
#else /* !CONFIG_IPIPE */
#ifdef CONFIG_TICKSOURCE_GPTMR0
case IRQ_TIMER0:
set_irq_handler(irq, handle_percpu_irq);
break;
#endif /* CONFIG_TICKSOURCE_GPTMR0 */
default:
set_irq_handler(irq, handle_simple_irq);
#endif /* !CONFIG_IPIPE */
break;
#endif /* !CONFIG_IPIPE */
}
}
......@@ -1224,15 +1223,14 @@ __attribute__((l1_text))
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain = ipipe_current_domain;
struct ipipe_domain *this_domain = __ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
int irq, s;
if (likely(vec == EVT_IVTMR_P)) {
if (likely(vec == EVT_IVTMR_P))
irq = IRQ_CORETMR;
} else {
else {
#if defined(SIC_ISR0) || defined(SICA_ISR0)
unsigned long sic_status[3];
......@@ -1262,12 +1260,11 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
break;
}
#endif
irq = ivg->irqno;
}
if (irq == IRQ_SYSTMR) {
#ifndef CONFIG_GENERIC_CLOCKEVENTS
#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0)
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
#endif
/* This is basically what we need from the register frame. */
......
......@@ -132,7 +132,7 @@ int bf53x_resume_l1_mem(unsigned char *memptr)
return 0;
}
#ifdef CONFIG_BFIN_WB
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
static void flushinv_all_dcache(void)
{
u32 way, bank, subbank, set;
......@@ -175,7 +175,7 @@ static inline void dcache_disable(void)
#ifdef CONFIG_BFIN_DCACHE
unsigned long ctrl;
#ifdef CONFIG_BFIN_WB
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
flushinv_all_dcache();
#endif
SSYNC();
......
......@@ -160,7 +160,7 @@ void __init mem_init(void)
/* do not count in kernel image between _rambase and _ramstart */
reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT;
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment