Skip to content

L
linux
Commit d8f1e1c7 authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman
Browse files
Options

[PATCH] USB: ftdi_sio update 

A couple of patches for the ftdi_sio driver on 2.5.73

"2.5.73-ftdi_sio-bigupdate.patch" - this is a big, ugly patch to
bring the ftdi_sio driver in line with what recently submitted for
inclusion in the 2.4.x kernel
(v2.4/testing/cset/cset-abbotti@mev.co.uk|ChangeSet|20030627190202|35624.txt),
but with necessary changes for 2.5.x.  I've bumped the driver's
version number to 1.4.0 to distinguish it from that submitted for
the 2.4.x kernel.

"2.5.73-ftdi_sio-dynamicwrite.patch" - this adds to the above patch
to replace the pool of urbs used for writes with dynamically
allocated urbs and transfer buffers.  I've tested this on the
FT8U232AM and FT232BM and I think I've catered for the older "SIO"
device, but I don't have a device to test that.  Also, it is not
safe to unload the driver module while write urbs are in flight
(same as for the Visor driver).
parent a1a5d792
Show whitespace changes
Inline Side-by-side
Showing with 1651 additions and 503 deletions
drivers/usb/serial/ftdi_sio.c
View file @ d8f1e1c7
......@@ -4,6 +4,8 @@
* Copyright (C) 1999 - 2001
* Greg Kroah-Hartman (greg@kroah.com)
* Bill Ryder (bryder@sgi.com)
* Copyright (C) 2002
* Kuba Ober (kuba@mareimbrium.org)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -15,17 +17,125 @@
* See http://ftdi-usb-sio.sourceforge.net for upto date testing info
* and extra documentation
*
* (27/Jun/2003) Ian Abbott
* Reworked the urb handling logic. We have no more pool, but dynamically
* allocate the urb and the transfer buffer on the fly. In testing this
* does not incure any measurable overhead. This also relies on the fact
* that we have proper reference counting logic for urbs. I nicked this
* from Greg KH's Visor driver.
*
* (23/Jun/2003) Ian Abbott
* Reduced flip buffer pushes and corrected a data length test in
* ftdi_read_bulk_callback.
* Defererence pointers after any paranoid checks, not before.
*
* (21/Jun/2003) Erik Nygren
* Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip.
* See <http://www.home-electro.com/tira1.htm>. Only operates properly
* at 100000 and RTS-CTS, so set custom divisor mode on startup.
* Also force the Tira-1 and USB-UIRT to only use their custom baud rates.
*
* (18/Jun/2003) Ian Abbott
* Added Device ID of the USB relais from Rudolf Gugler (backported from
* Philipp Gühring's patch for 2.5.x kernel).
* Moved read transfer buffer reallocation into startup function.
* Free existing write urb and transfer buffer in startup function.
* Only use urbs in write urb pool that were successfully allocated.
* Moved some constant macros out of functions.
* Minor whitespace and comment changes.
*
* (12/Jun/2003) David Norwood
* Added support for USB-UIRT IR tranceiver using 8U232AM chip.
* See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>. Only
* operates properly at 312500, so set custom divisor mode on startup.
*
* (12/Jun/2003) Ian Abbott
* Added Sealevel SeaLINK+ 210x, 220x, 240x, 280x vid/pids from Tuan Hoang
* - I've eliminated some that don't seem to exist!
* Added Home Electronics Tira-1 IR transceiver pid from Chris Horn
* Some whitespace/coding-style cleanups
*
* (11/Jun/2003) Ian Abbott
* Fixed unsafe spinlock usage in ftdi_write
*
* (24/Feb/2003) Richard Shooter
* Increase read buffer size to improve read speeds at higher baud rates
* (specifically tested with up to 1Mb/sec at 1.5M baud)
*
* (23/Feb/2003) John Wilkins
* Added Xon/xoff flow control (activating support in the ftdi device)
* Added vid/pid for Videonetworks/Homechoice (UK ISP)
*
* (23/Feb/2003) Bill Ryder
* Added matrix orb device vid/pids from Wayne Wylupski
*
* (19/Feb/2003) Ian Abbott
* For TIOCSSERIAL, set alt_speed to 0 when ASYNC_SPD_MASK value has
* changed to something other than ASYNC_SPD_HI, ASYNC_SPD_VHI,
* ASYNC_SPD_SHI or ASYNC_SPD_WARP. Also, unless ASYNC_SPD_CUST is in
* force, don't bother changing baud rate when custom_divisor has changed.
*
* (18/Feb/2003) Ian Abbott
* Fixed TIOCMGET handling to include state of DTR and RTS, the state
* of which are now saved by set_dtr() and set_rts().
* Fixed improper storage class for buf in set_dtr() and set_rts().
* Added FT232BM chip type and support for its extra baud rates (compared
* to FT8U232AM).
* Took account of special case divisor values for highest baud rates of
* FT8U232AM and FT232BM.
* For TIOCSSERIAL, forced alt_speed to 0 when ASYNC_SPD_CUST kludge used,
* as previous alt_speed setting is now stale.
* Moved startup code common between the startup routines for the
* different chip types into a common subroutine.
*
* (17/Feb/2003) Bill Ryder
* Added write urb buffer pool on a per device basis
* Added more checking for open file on callbacks (fixed OOPS)
* Added CrystalFontz 632 and 634 PIDs
* (thanx to CrystalFontz for the sample devices - they flushed out
* some driver bugs)
* Minor debugging message changes
* Added throttle, unthrottle and chars_in_buffer functions
* Fixed FTDI_SIO (the original device) bug
* Fixed some shutdown handling
*
*
*
*
* (07/Jun/2002) Kuba Ober
* Changed FTDI_SIO_BASE_BAUD_TO_DIVISOR macro into ftdi_baud_to_divisor
* function. It was getting too complex.
* Fix the divisor calculation logic which was setting divisor of 0.125
* instead of 0.5 for fractional parts of divisor equal to 5/8, 6/8, 7/8.
* Also make it bump up the divisor to next integer in case of 7/8 - it's
* a better approximation.
*
* (25/Jul/2002) Bill Ryder inserted Dmitri's TIOCMIWAIT patch
* Not tested by me but it doesn't break anything I use.
*
* (04/Jan/2002) Kuba Ober
* Implemented 38400 baudrate kludge, where it can be substituted with other
* values. That's the only way to set custom baudrates.
* Implemented TIOCSSERIAL, TIOCGSERIAL ioctl's so that setserial is happy.
* FIXME: both baudrate things should eventually go to usbserial.c as other
* devices may need that functionality too. Actually, it can probably be
* merged in serial.c somehow - too many drivers repeat this code over
* and over.
* Fixed baudrate forgetfulness - open() used to reset baudrate to 9600 every time.
* Divisors for baudrates are calculated by a macro.
* Small code cleanups. Ugly whitespace changes for Plato's sake only ;-].
*
* (04/Nov/2001) Bill Ryder
* Fixed bug in read_bulk_callback where incorrect urb buffer was used.
* cleaned up write offset calculation
* added write_room since default values can be incorrect for sio
* changed write_bulk_callback to use same queue_task as other drivers
* Cleaned up write offset calculation
* Added write_room since default values can be incorrect for sio
* Changed write_bulk_callback to use same queue_task as other drivers
* (the previous version caused panics)
* Removed port iteration code since the device only has one I/O port and it
* was wrong anyway.
*
* (31/May/2001) gkh
* switched from using spinlock to a semaphore, which fixes lots of problems.
* Switched from using spinlock to a semaphore, which fixes lots of problems.
*
* (23/May/2001) Bill Ryder
* Added runtime debug patch (thanx Tyson D Sawyer).
......@@ -49,7 +159,6 @@
* Added shutdown routine to close files when device removed.
* More debug and error message cleanups.
*
*
* (11/13/2000) Bill Ryder
* Added spinlock protected open code and close code.
* Multiple opens work (sort of - see webpage mentioned above).
......@@ -90,7 +199,6 @@
/* to talk to the device */
/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
......@@ -103,6 +211,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
#ifdef CONFIG_USB_SERIAL_DEBUG
static int debug = 1;
#else
......@@ -112,47 +221,244 @@
#include "usb-serial.h"
#include "ftdi_sio.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v1.2.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>"
#define DRIVER_DESC "USB FTDI RS232 Converters Driver"
#define DRIVER_VERSION "v1.4.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static struct usb_device_id id_table_sio [] = {
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ } /* Terminating entry */
};
/* THe 8U232AM has the same API as the sio except for:
- it can support MUCH higher baudrates (921600 at 48MHz/230400
at 12MHz so .. it's baudrate setting codes are different
- it has a two byte status code.
- it returns characters very 16ms (the FTDI does it every 40ms)
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
* o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
* o 230400 at 12MHz
* so .. 8U232AM's baudrate setting codes are different
* - it has a two byte status code.
* - it returns characters every 16ms (the FTDI does it every 40ms)
*
* the bcdDevice value is used to differentiate FT232BM and FT245BM from
* the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
* combinations in both tables.
* FIXME: perhaps bcdDevice can also identify 12MHz devices, but I don't know
* if those ever went into mass production. [Ian Abbott]
*/
static struct usb_device_id id_table_8U232AM [] = {
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_0_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_5_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_6_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) },
{ } /* Terminating entry */
};
static struct usb_device_id id_table_combined [] = {
static struct usb_device_id id_table_FT232BM [] = {
{ USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_MTXORB_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) },
{ } /* Terminating entry */
};
static struct usb_device_id id_table_USB_UIRT [] = {
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
{ } /* Terminating entry */
};
static struct usb_device_id id_table_HE_TIRA1 [] = {
{ USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_0_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_1_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_2_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_3_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_MTXORB_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
static struct usb_driver ftdi_driver = {
.owner = THIS_MODULE,
.name = "ftdi_sio",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
......@@ -160,31 +466,63 @@ static struct usb_driver ftdi_driver = {
};
/* Constants for read urb and write urb */
#define BUFSZ 512
#define PKTSZ 64
struct ftdi_private {
enum ftdi_type ftdi_type;
__u16 last_set_data_urb_value ; /* the last data state set - needed for doing a break */
int write_offset;
ftdi_chip_type_t chip_type;
/* type of the device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
__u16 last_set_data_urb_value ;
/* the last data state set - needed for doing a break */
int write_offset; /* This is the offset in the usb data block to write the serial data -
* it is different between devices
*/
int flags; /* some ASYNC_xxxx flags are supported */
unsigned long last_dtr_rts; /* saved modem control outputs */
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
char prev_status, diff_status; /* Used for TIOCMIWAIT */
int force_baud; /* if non-zero, force the baud rate to this value */
int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */
};
/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
/* End TIOCMIWAIT */
#define FTDI_IMPL_ASYNC_FLAGS = ( ASYNC_SPD_HI | ASYNC_SPD_VHI \
ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP )
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_startup (struct usb_serial *serial);
static int ftdi_SIO_startup (struct usb_serial *serial);
static int ftdi_8U232AM_startup (struct usb_serial *serial);
static void ftdi_sio_shutdown (struct usb_serial *serial);
static int ftdi_sio_open (struct usb_serial_port *port, struct file *filp);
static void ftdi_sio_close (struct usb_serial_port *port, struct file *filp);
static int ftdi_sio_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
static int ftdi_sio_write_room (struct usb_serial_port *port);
static void ftdi_sio_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
static void ftdi_sio_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios * old);
static int ftdi_sio_tiocmget (struct usb_serial_port *port, struct file *file);
static int ftdi_sio_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static int ftdi_sio_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void ftdi_sio_break_ctl (struct usb_serial_port *port, int break_state );
/* Should rename most ftdi_sio's to ftdi_ now since there are two devices
which share common code */
static struct usb_serial_device_type ftdi_sio_device = {
static int ftdi_FT232BM_startup (struct usb_serial *serial);
static int ftdi_USB_UIRT_startup (struct usb_serial *serial);
static int ftdi_HE_TIRA1_startup (struct usb_serial *serial);
static void ftdi_shutdown (struct usb_serial *serial);
static int ftdi_open (struct usb_serial_port *port, struct file *filp);
static void ftdi_close (struct usb_serial_port *port, struct file *filp);
static int ftdi_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
static int ftdi_write_room (struct usb_serial_port *port);
static int ftdi_chars_in_buffer (struct usb_serial_port *port);
static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old);
static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl (struct usb_serial_port *port, int break_state );
static void ftdi_throttle (struct usb_serial_port *port);
static void ftdi_unthrottle (struct usb_serial_port *port);
static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor (int baud);
static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor (int baud);
static struct usb_serial_device_type ftdi_SIO_device = {
.owner = THIS_MODULE,
.name = "FTDI SIO",
.id_table = id_table_sio,
......@@ -192,77 +530,206 @@ static struct usb_serial_device_type ftdi_sio_device = {
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.open = ftdi_sio_open,
.close = ftdi_sio_close,
.write = ftdi_sio_write,
.write_room = ftdi_sio_write_room,
.read_bulk_callback = ftdi_sio_read_bulk_callback,
.write_bulk_callback = ftdi_sio_write_bulk_callback,
.ioctl = ftdi_sio_ioctl,
.set_termios = ftdi_sio_set_termios,
.break_ctl = ftdi_sio_break_ctl,
.tiocmget = ftdi_sio_tiocmget,
.tiocmset = ftdi_sio_tiocmset,
.attach = ftdi_sio_startup,
.shutdown = ftdi_sio_shutdown,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
.write_room = ftdi_write_room,
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.attach = ftdi_SIO_startup,
.shutdown = ftdi_shutdown,
};
static struct usb_serial_device_type ftdi_8U232AM_device = {
.owner = THIS_MODULE,
.name = "FTDI 8U232AM",
.name = "FTDI 8U232AM Compatible",
.id_table = id_table_8U232AM,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.open = ftdi_sio_open,
.close = ftdi_sio_close,
.write = ftdi_sio_write,
.write_room = ftdi_sio_write_room,
.read_bulk_callback = ftdi_sio_read_bulk_callback,
.write_bulk_callback = ftdi_sio_write_bulk_callback,
.ioctl = ftdi_sio_ioctl,
.set_termios = ftdi_sio_set_termios,
.break_ctl = ftdi_sio_break_ctl,
.tiocmget = ftdi_sio_tiocmget,
.tiocmset = ftdi_sio_tiocmset,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
.write_room = ftdi_write_room,
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.attach = ftdi_8U232AM_startup,
.shutdown = ftdi_sio_shutdown,
.shutdown = ftdi_shutdown,
};
static struct usb_serial_device_type ftdi_FT232BM_device = {
.owner = THIS_MODULE,
.name = "FTDI FT232BM Compatible",
.id_table = id_table_FT232BM,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
.write_room = ftdi_write_room,
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.attach = ftdi_FT232BM_startup,
.shutdown = ftdi_shutdown,
};
static struct usb_serial_device_type ftdi_USB_UIRT_device = {
.owner = THIS_MODULE,
.name = "USB-UIRT Infrared Receiver/Transmitter",
.id_table = id_table_USB_UIRT,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
.write_room = ftdi_write_room,
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.attach = ftdi_USB_UIRT_startup,
.shutdown = ftdi_shutdown,
};
/* The TIRA1 is based on a FT232BM which requires a fixed baud rate of 100000
* and which requires RTS-CTS to be enabled. */
static struct usb_serial_device_type ftdi_HE_TIRA1_device = {
.owner = THIS_MODULE,
.name = "Home-Electronics TIRA-1 IR Transceiver",
.id_table = id_table_HE_TIRA1,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
.write_room = ftdi_write_room,
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.attach = ftdi_HE_TIRA1_startup,
.shutdown = ftdi_shutdown,
};
#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
/* High and low are for DTR, RTS etc etc */
#define HIGH 1
#define LOW 0
/*
* ***************************************************************************
* FTDI SIO Serial Converter specific driver functions
* Utlity functions
* ***************************************************************************
*/
#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
unsigned short int divisor;
int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1
divisor = divisor3 >> 3;
divisor3 &= 0x7;
if (divisor3 == 1) divisor |= 0xc000; else // 0.125
if (divisor3 >= 4) divisor |= 0x4000; else // 0.5
if (divisor3 != 0) divisor |= 0x8000; // 0.25
if (divisor == 1) divisor = 0; /* special case for maximum baud rate */
return divisor;
}
/* utility functions to set and unset dtr and rts */
#define HIGH 1
#define LOW 0
static int set_rts(struct usb_device *dev,
unsigned int pipe,
int high_or_low)
static unsigned short int ftdi_232am_baud_to_divisor(int baud)
{
static char buf[1];
unsigned ftdi_high_or_low = (high_or_low? FTDI_SIO_SET_RTS_HIGH :
FTDI_SIO_SET_RTS_LOW);
return(usb_control_msg(dev, pipe,
return(ftdi_232am_baud_base_to_divisor(baud, 48000000));
}
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
__u32 divisor;
int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
divisor = divisor3 >> 3;
divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1) divisor = 0; else // 1.0
if (divisor == 0x4001) divisor = 1; // 1.5
return divisor;
}
static __u32 ftdi_232bm_baud_to_divisor(int baud)
{
return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
}
static int set_rts(struct usb_serial_port *port, int high_or_low)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
char buf[1];
unsigned ftdi_high_or_low;
if (high_or_low) {
ftdi_high_or_low = FTDI_SIO_SET_RTS_HIGH;
priv->last_dtr_rts |= TIOCM_RTS;
} else {
ftdi_high_or_low = FTDI_SIO_SET_RTS_LOW;
priv->last_dtr_rts &= ~TIOCM_RTS;
}
return(usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
ftdi_high_or_low, 0,
buf, 0, WDR_TIMEOUT));
}
static int set_dtr(struct usb_device *dev,
unsigned int pipe,
int high_or_low)
static int set_dtr(struct usb_serial_port *port, int high_or_low)
{
static char buf[1];
unsigned ftdi_high_or_low = (high_or_low? FTDI_SIO_SET_DTR_HIGH :
FTDI_SIO_SET_DTR_LOW);
return(usb_control_msg(dev, pipe,
struct ftdi_private *priv = usb_get_serial_port_data(port);
char buf[1];
unsigned ftdi_high_or_low;
if (high_or_low) {
ftdi_high_or_low = FTDI_SIO_SET_DTR_HIGH;
priv->last_dtr_rts |= TIOCM_DTR;
} else {
ftdi_high_or_low = FTDI_SIO_SET_DTR_LOW;
priv->last_dtr_rts &= ~TIOCM_DTR;
}
return(usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
ftdi_high_or_low, 0,
......@@ -270,71 +737,409 @@ static int set_dtr(struct usb_device *dev,
}
static __u32 get_ftdi_divisor(struct usb_serial_port * port);
static int change_speed(struct usb_serial_port *port)
{
char buf[1];
__u16 urb_value;
__u16 urb_index;
__u32 urb_index_value;
urb_index_value = get_ftdi_divisor(port);
urb_value = (__u16)urb_index_value;
urb_index = (__u16)(urb_index_value >> 16);
return (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
buf, 0, 100) < 0);
}
static __u32 get_ftdi_divisor(struct usb_serial_port * port)
{ /* get_ftdi_divisor */
struct ftdi_private *priv = usb_get_serial_port_data(port);
__u32 div_value = 0;
int div_okay = 1;
char *chip_name = "";
int baud;
/*
* The logic involved in setting the baudrate can be cleanly split in 3 steps.
* Obtaining the actual baud rate is a little tricky since unix traditionally
* somehow ignored the possibility to set non-standard baud rates.
* 1. Standard baud rates are set in tty->termios->c_cflag
* 2. If these are not enough, you can set any speed using alt_speed as follows:
* - set tty->termios->c_cflag speed to B38400
* - set your real speed in tty->alt_speed; it gets ignored when
* alt_speed==0, (or)
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
* flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just
* sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800)
* ** Steps 1, 2 are done courtesy of tty_get_baud_rate
* 3. You can also set baud rate by setting custom divisor as follows
* - set tty->termios->c_cflag speed to B38400
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
* o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
* o custom_divisor set to baud_base / your_new_baudrate
* ** Step 3 is done courtesy of code borrowed from serial.c - I should really
* spend some time and separate+move this common code to serial.c, it is
* replicated in nearly every serial driver you see.
*/
/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
baud = tty_get_baud_rate(port->tty);
dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud);
/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
if (baud == 38400 &&
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(priv->custom_divisor)) {
baud = priv->baud_base / priv->custom_divisor;
dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud);
}
/* 3. Convert baudrate to device-specific divisor */
if (!baud) baud = 9600;
switch(priv->chip_type) {
case SIO: /* SIO chip */
chip_name = "SIO";
switch(baud) {
case 300: div_value = ftdi_sio_b300; break;
case 600: div_value = ftdi_sio_b600; break;
case 1200: div_value = ftdi_sio_b1200; break;
case 2400: div_value = ftdi_sio_b2400; break;
case 4800: div_value = ftdi_sio_b4800; break;
case 9600: div_value = ftdi_sio_b9600; break;
case 19200: div_value = ftdi_sio_b19200; break;
case 38400: div_value = ftdi_sio_b38400; break;
case 57600: div_value = ftdi_sio_b57600; break;
case 115200: div_value = ftdi_sio_b115200; break;
} /* baud */
if (div_value == 0) {
dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud);
div_value = ftdi_sio_b9600;
div_okay = 0;
}
break;
case FT8U232AM: /* 8U232AM chip */
chip_name = "FT8U232AM";
if (baud <= 3000000) {
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __FUNCTION__);
div_value = ftdi_232am_baud_to_divisor(9600);
div_okay = 0;
}
break;
case FT232BM: /* FT232BM chip */
chip_name = "FT232BM";
if (baud <= 3000000) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __FUNCTION__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
}
break;
} /* priv->chip_type */
if (div_okay) {
dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
__FUNCTION__, baud, (unsigned long)div_value, chip_name);
}
return(div_value);
}
static int get_serial_info(struct usb_serial_port * port, struct serial_struct * retinfo)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct tmp;
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.flags = priv->flags;
tmp.baud_base = priv->baud_base;
tmp.custom_divisor = priv->custom_divisor;
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
} /* get_serial_info */
static int ftdi_sio_startup (struct usb_serial *serial)
static int set_serial_info(struct usb_serial_port * port, struct serial_struct * newinfo)
{ /* set_serial_info */
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct new_serial;
struct ftdi_private old_priv;
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
old_priv = * priv;
/* Do error checking and permission checking */
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
(priv->flags & ~ASYNC_USR_MASK)))
return -EPERM;
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
priv->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
if ((new_serial.baud_base != priv->baud_base) ||
(new_serial.baud_base < 9600))
return -EINVAL;
/* Make the changes - these are privileged changes! */
priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
priv->custom_divisor = new_serial.custom_divisor;
port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) {
if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
port->tty->alt_speed = 57600;
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
port->tty->alt_speed = 115200;
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
port->tty->alt_speed = 230400;
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
port->tty->alt_speed = 460800;
else
port->tty->alt_speed = 0;
}
if (((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) ||
(((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(old_priv.custom_divisor != priv->custom_divisor))) {
change_speed(port);
}
return (0);
} /* set_serial_info */
/*
* ***************************************************************************
* FTDI driver specific functions
* ***************************************************************************
*/
/* Common startup subroutine */
/* Called from ftdi_SIO_startup, etc. */
static int ftdi_common_startup (struct usb_serial *serial)
{
struct usb_serial_port *port = &serial->port[0];
struct ftdi_private *priv;
dbg("%s",__FUNCTION__);
priv = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv){
err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
return -ENOMEM;
}
memset(priv, 0, sizeof(*priv));
init_waitqueue_head(&priv->delta_msr_wait);
/* This will push the characters through immediately rather
than queue a task to deliver them */
priv->flags = ASYNC_LOW_LATENCY;
/* Increase the size of read buffers */
if (port->bulk_in_buffer) {
kfree (port->bulk_in_buffer);
}
port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
if (!port->bulk_in_buffer) {
kfree (priv);
return -ENOMEM;
}
if (port->read_urb) {
port->read_urb->transfer_buffer = port->bulk_in_buffer;
port->read_urb->transfer_buffer_length = BUFSZ;
}
/* Free port's existing write urb and transfer buffer. */
if (port->write_urb) {
usb_free_urb (port->write_urb);
port->write_urb = NULL;
}
if (port->bulk_out_buffer) {
kfree (port->bulk_out_buffer);
port->bulk_out_buffer = NULL;
}
priv->ftdi_type = sio;
priv->write_offset = 1;
usb_set_serial_port_data(serial->port, priv);
return (0);
}
static int ftdi_8U232AM_startup (struct usb_serial *serial)
/* Startup for the SIO chip */
/* Called from usbserial:serial_probe */
static int ftdi_SIO_startup (struct usb_serial *serial)
{
struct ftdi_private *priv;
int err;
dbg("%s",__FUNCTION__);
priv = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv){
err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
return -ENOMEM;
err = ftdi_common_startup(serial);
if (err){
return (err);
}
priv->ftdi_type = F8U232AM;
priv->write_offset = 0;
usb_set_serial_port_data(serial->port, priv);
priv = usb_get_serial_port_data(serial->port);
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
priv->write_offset = 1;
return (0);
}
static void ftdi_sio_shutdown (struct usb_serial *serial)
{
void *priv;
/* Startup for the 8U232AM chip */
/* Called from usbserial:serial_probe */
static int ftdi_8U232AM_startup (struct usb_serial *serial)
{ /* ftdi_8U232AM_startup */
struct ftdi_private *priv;
int err;
dbg("%s",__FUNCTION__);
err = ftdi_common_startup(serial);
if (err){
return (err);
}
priv = usb_get_serial_port_data(serial->port);
priv->chip_type = FT8U232AM;
priv->baud_base = 48000000 / 2; /* Would be / 16, but FTDI supports 0.125, 0.25 and 0.5 divisor fractions! */
return (0);
} /* ftdi_8U232AM_startup */
/* Startup for the FT232BM chip */
/* Called from usbserial:serial_probe */
static int ftdi_FT232BM_startup (struct usb_serial *serial)
{ /* ftdi_FT232BM_startup */
struct ftdi_private *priv;
int err;
dbg("%s",__FUNCTION__);
err = ftdi_common_startup(serial);
if (err){
return (err);
}
priv = usb_get_serial_port_data(serial->port);
priv->chip_type = FT232BM;
priv->baud_base = 48000000 / 2; /* Would be / 16, but FT232BM supports multiple of 0.125 divisor fractions! */
return (0);
} /* ftdi_FT232BM_startup */
/* Startup for the USB-UIRT device, which requires hardwired baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
static int ftdi_USB_UIRT_startup (struct usb_serial *serial)
{ /* ftdi_USB_UIRT_startup */
struct ftdi_private *priv;
int err;
dbg("%s",__FUNCTION__);
err = ftdi_8U232AM_startup(serial);
if (err){
return (err);
}
priv = usb_get_serial_port_data(serial->port);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
priv->force_baud = B38400;
return (0);
} /* ftdi_USB_UIRT_startup */
/* Startup for the HE-TIRA1 device, which requires hardwired
* baudrate (38400 gets mapped to 100000) */
static int ftdi_HE_TIRA1_startup (struct usb_serial *serial)
{ /* ftdi_HE_TIRA1_startup */
struct ftdi_private *priv;
int err;
dbg("%s",__FUNCTION__);
err = ftdi_FT232BM_startup(serial);
if (err){
return (err);
}
priv = usb_get_serial_port_data(serial->port);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
priv->force_baud = B38400;
priv->force_rtscts = 1;
return (0);
} /* ftdi_HE_TIRA1_startup */
/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
* it is called when the usb device is disconnected
*
* usbserial:usb_serial_disconnect
* calls __serial_close for each open of the port
* shutdown is called then (ie ftdi_shutdown)
*/
static void ftdi_shutdown (struct usb_serial *serial)
{ /* ftdi_shutdown */
struct usb_serial_port *port = serial->port;
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s", __FUNCTION__);
priv = usb_get_serial_port_data(&serial->port[0]);
if (priv){
/* all open ports are closed at this point
* (by usbserial.c:__serial_close, which calls ftdi_close)
*/
if (priv) {
kfree(priv);
usb_set_serial_port_data(&serial->port[0], NULL);
usb_set_serial_port_data(port, NULL);
}
}
} /* ftdi_shutdown */
static int ftdi_sio_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_sio_open */
static int ftdi_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_open */
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result = 0;
char buf[1]; /* Needed for the usb_control_msg I think */
dbg("%s", __FUNCTION__);
/* This will push the characters through immediately rather
than queue a task to deliver them */
port->tty->low_latency = 1;
port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
......@@ -343,19 +1148,20 @@ static int ftdi_sio_open (struct usb_serial_port *port, struct file *filp)
FTDI_SIO_RESET_SIO,
0, buf, 0, WDR_TIMEOUT);
/* Setup termios defaults. According to tty_io.c the
settings are driver specific */
port->tty->termios->c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
/* Termios defaults are set by usb_serial_init. We don't change
port->tty->termios - this would loose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_sio_set_termios will send usb control messages */
ftdi_sio_set_termios(port, &tmp_termios);
/* ftdi_set_termios will send usb control messages */
ftdi_set_termios(port, &tmp_termios);
/* FIXME: Flow control might be enabled, so it should be checked -
we have no control of defaults! */
/* Turn on RTS and DTR since we are not flow controlling by default */
if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0),HIGH) < 0) {
if (set_dtr(port, HIGH) < 0) {
err("%s Error from DTR HIGH urb", __FUNCTION__);
}
if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),HIGH) < 0){
if (set_rts(port, HIGH) < 0){
err("%s Error from RTS HIGH urb", __FUNCTION__);
}
......@@ -363,23 +1169,37 @@ static int ftdi_sio_open (struct usb_serial_port *port, struct file *filp)
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
ftdi_sio_read_bulk_callback, port);
ftdi_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
return result;
} /* ftdi_sio_open */
} /* ftdi_open */
static void ftdi_sio_close (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_sio_close */
struct usb_serial *serial = port->serial; /* Checked in usbserial.c */
/*
* usbserial:__serial_close only calls ftdi_close if the point is open
*
* This only gets called when it is the last close
*
*
*/
static void ftdi_close (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_close */
struct usb_serial *serial;
unsigned int c_cflag = port->tty->termios->c_cflag;
char buf[1];
dbg("%s", __FUNCTION__);
serial = get_usb_serial ( port, __FUNCTION__);
if (!serial)
return;
if (serial->dev) {
if (c_cflag & HUPCL){
/* Disable flow control */
......@@ -392,37 +1212,45 @@ static void ftdi_sio_close (struct usb_serial_port *port, struct file *filp)
}
/* drop DTR */
if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0), LOW) < 0){
if (set_dtr(port, LOW) < 0){
err("Error from DTR LOW urb");
}
/* drop RTS */
if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),LOW) < 0) {
if (set_rts(port, LOW) < 0) {
err("Error from RTS LOW urb");
}
} /* Note change no line is hupcl is off */
/* shutdown our bulk reads and writes */
/* ***CHECK*** behaviour when there is nothing queued */
usb_unlink_urb (port->write_urb);
/* shutdown our bulk read */
if (port->read_urb) {
usb_unlink_urb (port->read_urb);
}
} /* ftdi_sio_close */
/* unlink the running write urbs */
} /* Note change no line is hupcl is off */
} /* if (serial->dev) */
} /* ftdi_close */
/* The ftdi_sio requires the first byte to have:
/* The SIO requires the first byte to have:
* B0 1
* B1 0
* B2..7 length of message excluding byte 0
*
* The new devices do not require this byte
*/
static int ftdi_sio_write (struct usb_serial_port *port, int from_user,
static int ftdi_write (struct usb_serial_port *port, int from_user,
const unsigned char *buf, int count)
{ /* ftdi_sio_write */
struct usb_serial *serial = port->serial;
{ /* ftdi_write */
struct usb_serial *serial = get_usb_serial ( port, __FUNCTION__);
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *first_byte = port->write_urb->transfer_buffer;
int data_offset ;
int result;
struct urb *urb;
unsigned char *buffer;
int data_offset ; /* will be 1 for the SIO and 0 otherwise */
int status;
int transfer_size;
dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
......@@ -434,123 +1262,209 @@ static int ftdi_sio_write (struct usb_serial_port *port, int from_user,
data_offset = priv->write_offset;
dbg("data_offset set to %d",data_offset);
if (port->write_urb->status == -EINPROGRESS) {
dbg("%s - already writing", __FUNCTION__);
return (0);
/* Determine total transfer size */
transfer_size = count;
if (data_offset > 0) {
/* Original sio needs control bytes too... */
transfer_size += (data_offset *
((count + (PKTSZ - 1 - data_offset)) /
(PKTSZ - data_offset)));
}
buffer = kmalloc (transfer_size, GFP_ATOMIC);
if (!buffer) {
err("%s ran out of kernel memory for urb ...", __FUNCTION__);
return -ENOMEM;
}
count += data_offset;
count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
err("%s - no more free urbs", __FUNCTION__);
kfree (buffer);
return -ENOMEM;
}
/* Copy data */
if (data_offset > 0) {
/* Original sio requires control byte at start of each packet. */
int user_pktsz = PKTSZ - data_offset;
int todo = count;
unsigned char *first_byte = buffer;
const unsigned char *current_position = buf;
while (todo > 0) {
if (user_pktsz > todo) {
user_pktsz = todo;
}
/* Write the control byte at the front of the packet*/
*first_byte = 1 | ((user_pktsz) << 2);
/* Copy data for packet */
if (from_user) {
if (copy_from_user (first_byte + data_offset,
current_position, user_pktsz)){
kfree (buffer);
usb_free_urb (urb);
return -EFAULT;
}
} else {
memcpy (first_byte + data_offset,
current_position, user_pktsz);
}
first_byte += user_pktsz + data_offset;
current_position += user_pktsz;
todo -= user_pktsz;
}
} else {
/* No control byte required. */
/* Copy in the data to send */
if (from_user) {
if (copy_from_user(port->write_urb->transfer_buffer + data_offset,
buf, count - data_offset )){
if (copy_from_user (buffer, buf, count)) {
kfree (buffer);
usb_free_urb (urb);
return -EFAULT;
}
} else {
memcpy(port->write_urb->transfer_buffer + data_offset,
buf, count - data_offset );
memcpy (buffer, buf, count);
}
first_byte = port->write_urb->transfer_buffer;
if (data_offset > 0){
/* Write the control byte at the front of the packet*/
*first_byte = 1 | ((count-data_offset) << 2) ;
}
dbg("%s Bytes: %d, First Byte: 0x%02x", __FUNCTION__,count, first_byte[0]);
usb_serial_debug_data (__FILE__, __FUNCTION__, count, first_byte);
usb_serial_debug_data (__FILE__, __FUNCTION__, transfer_size, buffer);
/* send the data out the bulk port */
usb_fill_bulk_urb(port->write_urb, serial->dev,
/* fill the buffer and send it */
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, count,
ftdi_sio_write_bulk_callback, port);
buffer, transfer_size,
ftdi_write_bulk_callback, port);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
return 0;
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
count = status;
}
dbg("%s write returning: %d", __FUNCTION__, count - data_offset);
return (count - data_offset);
} /* ftdi_sio_write */
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
usb_free_urb (urb);
dbg("%s write returning: %d", __FUNCTION__, count);
return count;
} /* ftdi_write */
static void ftdi_sio_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
/* This function may get called when the device is closed */
static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct usb_serial *serial;
struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
dbg("%s", __FUNCTION__);
if (port_paranoia_check (port, "ftdi_sio_write_bulk_callback")) {
if (port_paranoia_check (port, __FUNCTION__))
return;
}
serial = port->serial;
if (serial_paranoia_check (serial, "ftdi_sio_write_bulk_callback")) {
if (urb->status) {
dbg("nonzero write bulk status received: %d", urb->status);
return;
}
if (urb->status) {
dbg("nonzero write bulk status received: %d", urb->status);
if (!serial) {
dbg("%s - bad serial pointer, exiting", __FUNCTION__);
return;
}
/* Have to check for validity of queueing up the tasks */
dbg("%s - port->open_count = %d", __FUNCTION__, port->open_count);
if (port->open_count > 0){
schedule_work(&port->work);
} /* ftdi_sio_write_bulk_callback */
}
return;
} /* ftdi_write_bulk_callback */
static int ftdi_sio_write_room( struct usb_serial_port *port )
static int ftdi_write_room( struct usb_serial_port *port )
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
int room;
dbg("%s - port %d", __FUNCTION__, port->number);
if ( port->write_urb->status == -EINPROGRESS) {
/* There is a race here with the _write routines but it won't hurt */
room = 0;
} else {
room = port->bulk_out_size - priv->write_offset;
}
return(room);
} /* ftdi_sio_write_room */
/*
* We really can take anything the user throws at us
* but let's pick a nice big number to tell the tty
* layer that we have lots of free space
*/
return 2048;
} /* ftdi_write_room */
static void ftdi_sio_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{ /* ftdi_sio_serial_buld_callback */
static int ftdi_chars_in_buffer (struct usb_serial_port *port)
{ /* ftdi_chars_in_buffer */
dbg("%s - port %d", __FUNCTION__, port->number);
/*
* We can't really account for how much data we
* have sent out, but hasn't made it through to the
* device, so just tell the tty layer that everything
* is flushed.
*/
return 0;
} /* ftdi_chars_in_buffer */
static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{ /* ftdi_read_bulk_callback */
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct usb_serial *serial;
struct tty_struct *tty = port->tty ;
struct tty_struct *tty;
struct ftdi_private *priv;
char error_flag;
unsigned char *data = urb->transfer_buffer;
const int data_offset = 2;
int i;
int result;
int need_flip;
int packet_offset;
dbg("%s - port %d", __FUNCTION__, port->number);
if (urb->number_of_packets > 0) {
err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
}
dbg("%s", __FUNCTION__);
if (port_paranoia_check (port, __FUNCTION__)) {
return;
}
if (port->open_count <= 0)
return;
if (port_paranoia_check (port, "ftdi_sio_read_bulk_callback")) {
serial = get_usb_serial(port,__FUNCTION__);
if (!serial){
dbg("%s - bad serial pointer - exiting",__FUNCTION__);
return;
}
serial = port->serial;
if (serial_paranoia_check (serial, "ftdi_sio_read_bulk_callback")) {
tty = port->tty;
if (!tty) {
dbg("%s - bad tty pointer - exiting",__FUNCTION__);
return;
}
priv = usb_get_serial_port_data(port);
if (urb->status) {
/* This will happen at close every time so it is a dbg not an err */
dbg("nonzero read bulk status received: %d", urb->status);
dbg("(this is ok on close) nonzero read bulk status received: %d", urb->status);
return;
}
/* The first two bytes of every read packet are status */
if (urb->actual_length > 2) {
usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
} else {
dbg("Just status 0o%03o0o%03o",data[0],data[1]);
dbg("Status only: %03oo %03oo",data[0],data[1]);
}
......@@ -559,31 +1473,42 @@ static void ftdi_sio_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
/* See acm.c - you do a tty_hangup - eg tty_hangup(tty) */
/* if CD is dropped and the line is not CLOCAL then we should hangup */
need_flip = 0;
for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
/* Compare new line status to the old one, signal if different */
if (priv != NULL) {
char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
if (new_status != priv->prev_status) {
priv->diff_status |= new_status ^ priv->prev_status;
wake_up_interruptible(&priv->delta_msr_wait);
priv->prev_status = new_status;
}
}
/* Handle errors and break */
error_flag = TTY_NORMAL;
/* Although the device uses a bitmask and hence can have multiple */
/* errors on a packet - the order here sets the priority the */
/* error is returned to the tty layer */
if ( data[1] & FTDI_RS_OE ) {
if ( data[packet_offset+1] & FTDI_RS_OE ) {
error_flag = TTY_OVERRUN;
dbg("OVERRRUN error");
}
if ( data[1] & FTDI_RS_BI ) {
if ( data[packet_offset+1] & FTDI_RS_BI ) {
error_flag = TTY_BREAK;
dbg("BREAK received");
}
if ( data[1] & FTDI_RS_PE ) {
if ( data[packet_offset+1] & FTDI_RS_PE ) {
error_flag = TTY_PARITY;
dbg("PARITY error");
}
if ( data[1] & FTDI_RS_FE ) {
if ( data[packet_offset+1] & FTDI_RS_FE ) {
error_flag = TTY_FRAME;
dbg("FRAMING error");
}
if (urb->actual_length > data_offset) {
for (i = data_offset ; i < urb->actual_length ; ++i) {
if (urb->actual_length > packet_offset + 2) {
for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) {
/* have to make sure we don't overflow the buffer
with tty_insert_flip_char's */
if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
......@@ -592,11 +1517,9 @@ static void ftdi_sio_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
tty_insert_flip_char(tty, data[i], error_flag);
tty_insert_flip_char(tty, data[packet_offset+i], error_flag);
}
tty_flip_buffer_push(tty);
need_flip = 1;
}
#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
......@@ -616,72 +1539,35 @@ static void ftdi_sio_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
tty_flip_buffer_push(tty);
}
tty_insert_flip_char(tty, 0xff, error_flag);
tty_flip_buffer_push(tty);
need_flip = 1;
}
}
#endif
} /* "for(packet_offset=0..." */
/* Low latency */
if (need_flip) {
tty_flip_buffer_push(tty);
}
/* if the port is closed stop trying to read */
if (port->open_count > 0){
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
ftdi_sio_read_bulk_callback, port);
ftdi_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
}
return;
} /* ftdi_sio_serial_read_bulk_callback */
static __u16 translate_baudrate_to_ftdi(unsigned int cflag, enum ftdi_type ftdi_type)
{ /* translate_baudrate_to_ftdi */
__u16 urb_value = ftdi_sio_b9600;
if (ftdi_type == sio){
switch(cflag & CBAUD){
case B0: break; /* ignored by this */
case B300: urb_value = ftdi_sio_b300; dbg("Set to 300"); break;
case B600: urb_value = ftdi_sio_b600; dbg("Set to 600") ; break;
case B1200: urb_value = ftdi_sio_b1200; dbg("Set to 1200") ; break;
case B2400: urb_value = ftdi_sio_b2400; dbg("Set to 2400") ; break;
case B4800: urb_value = ftdi_sio_b4800; dbg("Set to 4800") ; break;
case B9600: urb_value = ftdi_sio_b9600; dbg("Set to 9600") ; break;
case B19200: urb_value = ftdi_sio_b19200; dbg("Set to 19200") ; break;
case B38400: urb_value = ftdi_sio_b38400; dbg("Set to 38400") ; break;
case B57600: urb_value = ftdi_sio_b57600; dbg("Set to 57600") ; break;
case B115200: urb_value = ftdi_sio_b115200; dbg("Set to 115200") ; break;
default: dbg("%s - FTDI_SIO does not support the baudrate (%d) requested",
__FUNCTION__, (cflag & CBAUD));
break;
}
} else { /* it is 8U232AM */
switch(cflag & CBAUD){
case B0: break; /* ignored by this */
case B300: urb_value = ftdi_8U232AM_48MHz_b300; dbg("Set to 300"); break;
case B600: urb_value = ftdi_8U232AM_48MHz_b600; dbg("Set to 600") ; break;
case B1200: urb_value = ftdi_8U232AM_48MHz_b1200; dbg("Set to 1200") ; break;
case B2400: urb_value = ftdi_8U232AM_48MHz_b2400; dbg("Set to 2400") ; break;
case B4800: urb_value = ftdi_8U232AM_48MHz_b4800; dbg("Set to 4800") ; break;
case B9600: urb_value = ftdi_8U232AM_48MHz_b9600; dbg("Set to 9600") ; break;
case B19200: urb_value = ftdi_8U232AM_48MHz_b19200; dbg("Set to 19200") ; break;
case B38400: urb_value = ftdi_8U232AM_48MHz_b38400; dbg("Set to 38400") ; break;
case B57600: urb_value = ftdi_8U232AM_48MHz_b57600; dbg("Set to 57600") ; break;
case B115200: urb_value = ftdi_8U232AM_48MHz_b115200; dbg("Set to 115200") ; break;
case B230400: urb_value = ftdi_8U232AM_48MHz_b230400; dbg("Set to 230400") ; break;
case B460800: urb_value = ftdi_8U232AM_48MHz_b460800; dbg("Set to 460800") ; break;
case B921600: urb_value = ftdi_8U232AM_48MHz_b921600; dbg("Set to 921600") ; break;
default: dbg("%s - The baudrate (%d) requested is not implemented",
__FUNCTION__, (cflag & CBAUD));
break;
}
}
return(urb_value);
}
} /* ftdi_read_bulk_callback */
static void ftdi_sio_break_ctl( struct usb_serial_port *port, int break_state )
static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
{
struct usb_serial *serial = port->serial;
struct ftdi_private *priv = usb_get_serial_port_data(port);
......@@ -704,32 +1590,48 @@ static void ftdi_sio_break_ctl( struct usb_serial_port *port, int break_state )
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , 0,
buf, 0, WDR_TIMEOUT) < 0) {
err("%s - FAILED to enable/disable break state (state was %d)",
__FUNCTION__, break_state);
err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state);
}
dbg("%s - break state is %d - urb is %d", __FUNCTION__, break_state, urb_value);
dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value);
}
/* old_termios contains the original termios settings and tty->termios contains
* the new setting to be used
* WARNING: set_termios calls this with old_termios in kernel space
*/
/* As I understand this - old_termios contains the original termios settings */
/* and tty->termios contains the new setting to be used */
/* */
/* WARNING: set_termios calls this with old_termios in kernel space */
static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{ /* ftdi_sio_set_termios */
static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{ /* ftdi_termios */
struct usb_serial *serial = port->serial;
unsigned int cflag = port->tty->termios->c_cflag;
struct ftdi_private *priv = usb_get_serial_port_data(port);
__u16 urb_value; /* will hold the new flags */
char buf[1]; /* Perhaps I should dynamically alloc this? */
// Added for xon/xoff support
unsigned int iflag = port->tty->termios->c_iflag;
unsigned char vstop;
unsigned char vstart;
dbg("%s", __FUNCTION__);
/* Force baud rate if this device requires it, unless it is set to B0. */
if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
dbg("%s: forcing baud rate for this device", __FUNCTION__);
port->tty->termios->c_cflag &= ~CBAUD;
port->tty->termios->c_cflag |= priv->force_baud;
}
/* Force RTS-CTS if this device requires it. */
if (priv->force_rtscts) {
dbg("%s: forcing rtscts for this device", __FUNCTION__);
port->tty->termios->c_cflag |= CRTSCTS;
}
cflag = port->tty->termios->c_cflag;
/* FIXME -For this cut I don't care if the line is really changing or
not - so just do the change regardless - should be able to
......@@ -771,8 +1673,6 @@ static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios *
}
/* Now do the baudrate */
urb_value = translate_baudrate_to_ftdi((cflag & CBAUD), priv->ftdi_type);
if ((cflag & CBAUD) == B0 ) {
/* Disable flow control */
if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
......@@ -783,24 +1683,20 @@ static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios *
err("%s error from disable flowcontrol urb", __FUNCTION__);
}
/* Drop RTS and DTR */
if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0),LOW) < 0){
if (set_dtr(port, LOW) < 0){
err("%s Error from DTR LOW urb", __FUNCTION__);
}
if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),LOW) < 0){
if (set_rts(port, LOW) < 0){
err("%s Error from RTS LOW urb", __FUNCTION__);
}
} else {
/* set the baudrate determined before */
if (usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, 0,
buf, 0, 100) < 0) {
if (change_speed(port)) {
err("%s urb failed to set baurdrate", __FUNCTION__);
}
}
/* Set flow control */
/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
if (cflag & CRTSCTS) {
......@@ -815,6 +1711,32 @@ static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios *
}
} else {
/*
* Xon/Xoff code
*
* Check the IXOFF status in the iflag component of the termios structure
* if IXOFF is not set, the pre-xon/xoff code is executed.
*/
if (iflag & IXOFF) {
dbg("%s request to enable xonxoff iflag=%04x",__FUNCTION__,iflag);
// Try to enable the XON/XOFF on the ftdi_sio
// Set the vstart and vstop -- could have been done up above where
// a lot of other dereferencing is done but that would be very
// inefficient as vstart and vstop are not always needed
vstart=port->tty->termios->c_cc[VSTART];
vstop=port->tty->termios->c_cc[VSTOP];
urb_value=(vstop << 8) | (vstart);
if (usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
urb_value , FTDI_SIO_XON_XOFF_HS,
buf, 0, WDR_TIMEOUT) < 0) {
err("urb failed to set to xon/xoff flow control");
}
} else {
/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
dbg("%s Turning off hardware flow control", __FUNCTION__);
if (usb_control_msg(serial->dev,
......@@ -825,136 +1747,254 @@ static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios *
buf, 0, WDR_TIMEOUT) < 0) {
err("urb failed to clear flow control");
}
}
}
return;
} /* ftdi_sio_set_termios */
} /* ftdi_termios */
static int ftdi_sio_tiocmget (struct usb_serial_port *port, struct file *file)
static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
struct usb_serial *serial = port->serial;
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *buf = NULL;
int ret = -EINVAL;
int size;
dbg("%s", __FUNCTION__);
__u16 urb_value=0; /* Will hold the new flags */
char buf[2];
int ret, mask;
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
goto exit;
dbg("%s cmd 0x%04x", __FUNCTION__, cmd);
if (priv->ftdi_type == sio) {
size = 1;
} else {
/* Based on code from acm.c and others */
switch (cmd) {
case TIOCMGET:
dbg("%s TIOCMGET", __FUNCTION__);
switch (priv->chip_type) {
case SIO:
/* Request the status from the device */
if ((ret = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, 0,
buf, 1, WDR_TIMEOUT)) < 0 ) {
err("%s Could not get modem status of device - err: %d", __FUNCTION__,
ret);
return(ret);
}
break;
case FT8U232AM:
case FT232BM:
/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
format as the data returned from the in point */
size = 2;
}
ret = usb_control_msg(serial->dev,
if ((ret = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, 0, buf, size, WDR_TIMEOUT);
if (ret < 0) {
err("%s Could not get modem status of device - err: %d",
__FUNCTION__, ret);
goto exit;
0, 0,
buf, 2, WDR_TIMEOUT)) < 0 ) {
err("%s Could not get modem status of device - err: %d", __FUNCTION__,
ret);
return(ret);
}
break;
default:
return -EFAULT;
break;
}
ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
return put_user((buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0);
exit:
kfree(buf);
return ret;
}
static int ftdi_sio_tiocmset (struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial *serial = port->serial;
int ret = 0;
dbg("%s", __FUNCTION__);
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
priv->last_dtr_rts,
(unsigned long *) arg);
break;
if (set & TIOCM_RTS)
if ((ret = set_rts(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
HIGH)) < 0) {
err("Urb to set RTS failed");
goto exit;
case TIOCMSET: /* Turns on and off the lines as specified by the mask */
dbg("%s TIOCMSET", __FUNCTION__);
if (get_user(mask, (unsigned long *) arg))
return -EFAULT;
urb_value = ((mask & TIOCM_DTR) ? HIGH : LOW);
if ((ret = set_dtr(port, urb_value)) < 0){
err("Error from DTR set urb (TIOCMSET)");
return(ret);
}
urb_value = ((mask & TIOCM_RTS) ? HIGH : LOW);
if ((ret = set_rts(port, urb_value)) < 0){
err("Error from RTS set urb (TIOCMSET)");
return(ret);
}
return(0);
break;
if (set & TIOCM_DTR)
if ((ret = set_dtr(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
HIGH)) < 0) {
case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */
dbg("%s TIOCMBIS", __FUNCTION__);
if (get_user(mask, (unsigned long *) arg))
return -EFAULT;
if (mask & TIOCM_DTR){
if ((ret = set_dtr(port, HIGH)) < 0) {
err("Urb to set DTR failed");
goto exit;
return(ret);
}
if (clear & TIOCM_RTS)
if ((ret = set_rts(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
LOW)) < 0) {
err("Urb to unset RTS failed");
goto exit;
}
if (mask & TIOCM_RTS) {
if ((ret = set_rts(port, HIGH)) < 0){
err("Urb to set RTS failed");
return(ret);
}
}
return(0);
break;
if (clear & TIOCM_DTR)
if ((ret = set_dtr(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
LOW)) < 0) {
case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */
dbg("%s TIOCMBIC", __FUNCTION__);
if (get_user(mask, (unsigned long *) arg))
return -EFAULT;
if (mask & TIOCM_DTR){
if ((ret = set_dtr(port, LOW)) < 0){
err("Urb to unset DTR failed");
goto exit;
return(ret);
}
}
if (mask & TIOCM_RTS) {
if ((ret = set_rts(port, LOW)) < 0){
err("Urb to unset RTS failed");
return(ret);
}
}
return(0);
break;
exit:
return ret;
}
/*
* I had originally implemented TCSET{A,S}{,F,W} and
* TCGET{A,S} here separately, however when testing I
* found that the higher layers actually do the termios
* conversions themselves and pass the call onto
* ftdi_sio_set_termios.
*
*/
static int ftdi_sio_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
dbg("%s cmd 0x%04x", __FUNCTION__, cmd);
case TIOCGSERIAL: /* gets serial port data */
return get_serial_info(port, (struct serial_struct *) arg);
switch (cmd) {
default:
/* This is not an error - turns out the higher layers will do
* some ioctls itself
case TIOCSSERIAL: /* sets serial port data */
return set_serial_info(port, (struct serial_struct *) arg);
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was.
*
* This code is borrowed from linux/drivers/char/serial.c
*/
dbg("%s arg not supported - it was 0x%04x", __FUNCTION__,cmd);
return(-ENOIOCTLCMD);
break;
case TIOCMIWAIT:
while (priv != NULL) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
else {
char diff = priv->diff_status;
if (diff == 0) {
return -EIO; /* no change => error */
}
/* Consume all events */
priv->diff_status = 0;
/* Return 0 if caller wanted to know about these bits */
if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) ||
((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) {
return 0;
} /* ftdi_sio_ioctl */
}
/*
* Otherwise caller can't care less about what happened,
* and so we continue to wait for more events.
*/
}
}
return(0);
break;
default:
break;
}
/* This is not necessarily an error - turns out the higher layers will do
* some ioctls itself (see comment above)
*/
dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd);
return(-ENOIOCTLCMD);
} /* ftdi_ioctl */
static int __init ftdi_sio_init (void)
static void ftdi_throttle (struct usb_serial_port *port)
{
dbg("%s - port %d", __FUNCTION__, port->number);
usb_unlink_urb (port->read_urb);
}
static void ftdi_unthrottle (struct usb_serial_port *port)
{
int result;
struct usb_serial *serial = port->serial;
dbg("%s - port %d", __FUNCTION__, port->number);
port->read_urb->dev = serial->dev;
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
ftdi_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
}
static int __init ftdi_init (void)
{
dbg("%s", __FUNCTION__);
usb_serial_register (&ftdi_sio_device);
usb_serial_register (&ftdi_SIO_device);
usb_serial_register (&ftdi_8U232AM_device);
usb_serial_register (&ftdi_FT232BM_device);
usb_serial_register (&ftdi_USB_UIRT_device);
usb_serial_register (&ftdi_HE_TIRA1_device);
usb_register (&ftdi_driver);
info(DRIVER_VERSION ":" DRIVER_DESC);
return 0;
}
static void __exit ftdi_sio_exit (void)
static void __exit ftdi_exit (void)
{
dbg("%s", __FUNCTION__);
usb_deregister (&ftdi_driver);
usb_serial_deregister (&ftdi_sio_device);
usb_serial_deregister (&ftdi_HE_TIRA1_device);
usb_serial_deregister (&ftdi_USB_UIRT_device);
usb_serial_deregister (&ftdi_FT232BM_device);
usb_serial_deregister (&ftdi_8U232AM_device);
usb_serial_deregister (&ftdi_SIO_device);
}
module_init(ftdi_sio_init);
module_exit(ftdi_sio_exit);
module_init(ftdi_init);
module_exit(ftdi_exit);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
......
drivers/usb/serial/ftdi_sio.h
View file @ d8f1e1c7
......@@ -14,11 +14,12 @@
* of the protocol required to talk to the device and ongoing assistence
* during development.
*
* Bill Ryder - bryder@sgi.com of Silicon Graphics, Inc.- wrote the
* Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
* FTDI_SIO implementation.
*
* Philipp Ghring - pg@futureware.at - added the Device ID of the USB relais
* from Rudolf Gugler
*
*/
#define FTDI_VID 0x0403 /* Vendor Id */
......@@ -28,6 +29,93 @@
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_634_PID 0xFC09 /* Four line device */
#define FTDI_XF_632_PID 0xFC08 /* Two line device */
/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
/* broadband internet service. The following PID is exhibited by the usb device supplied */
/* (the VID is the standard ftdi vid (FTDI_VID) */
#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
/*
* The following are the values for the Matrix Orbital LCD displays,
* which are the FT232BM ( similar to the 8U232AM )
*/
#define FTDI_MTXORB_VID FTDI_VID /* Matrix Orbital Product Id */
#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
/*
* The following are the values for the Sealevel SeaLINK+ adapters.
* (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
* removed some PIDs that don't seem to match any existing products.)
*/
#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
/*
* Home Electronics (www.home-electro.com) USB gadgets
*/
#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR tranceiver */
/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
......@@ -84,19 +172,61 @@
/*
* BmRequestType: 0100 0000B
* bRequest: FTDI_SIO_SET_BAUDRATE
* wValue: BaudRate value - see below
* wValue: BaudDivisor value - see below
* wIndex: Port
* wLength: 0
* Data: None
* The BaudDivisor values are calculated as follows:
* - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
* I knew how to detect old chips to select proper base clock!
* - BaudDivisor is a fixed point number encoded in a funny way.
* (--WRONG WAY OF THINKING--)
* BaudDivisor is a fixed point number encoded with following bit weighs:
* (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
* end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
* (--THE REALITY--)
* The both-bits-set has quite different meaning from 0.75 - the chip designers
* have decided it to mean 0.125 instead of 0.75.
* This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
* and Flow Control Consideration for USB to RS232".
* - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
* automagically re-encode the resulting value to take fractions into consideration.
* As all values are integers, some bit twiddling is in order:
* BaudDivisor = (BaseClock / 16 / BaudRate) |
* (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5
* : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25
* : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125
* : 0)
*
* For the FT232BM, a 17th divisor bit was introduced to encode the multiples
* of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows
* (the first four codes are the same as for the FT8U232AM, where bit 16 is
* always 0):
* 000 - add .000 to divisor
* 001 - add .500 to divisor
* 010 - add .250 to divisor
* 011 - add .125 to divisor
* 100 - add .375 to divisor
* 101 - add .625 to divisor
* 110 - add .750 to divisor
* 111 - add .875 to divisor
* Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is
* placed in bit 0 of the urb index.
*
* Note that there are a couple of special cases to support the highest baud
* rates. If the calculated divisor value is 1, this needs to be replaced with
* 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001
* (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
* not supported by the FT8U232AM).
*/
enum ftdi_type {
sio = 1,
F8U232AM = 2,
};
typedef enum {
SIO = 1,
FT8U232AM = 2,
FT232BM = 3,
} ftdi_chip_type_t;
enum {
typedef enum {
ftdi_sio_b300 = 0,
ftdi_sio_b600 = 1,
ftdi_sio_b1200 = 2,
......@@ -107,39 +237,12 @@ enum {
ftdi_sio_b38400 = 7,
ftdi_sio_b57600 = 8,
ftdi_sio_b115200 = 9
};
enum {
ftdi_8U232AM_12MHz_b300 = 0x09c4,
ftdi_8U232AM_12MHz_b600 = 0x04E2,
ftdi_8U232AM_12MHz_b1200 = 0x0271,
ftdi_8U232AM_12MHz_b2400 = 0x4138,
ftdi_8U232AM_12MHz_b4800 = 0x809c,
ftdi_8U232AM_12MHz_b9600 = 0xc04e,
ftdi_8U232AM_12MHz_b19200 = 0x0027,
ftdi_8U232AM_12MHz_b38400 = 0x4013,
ftdi_8U232AM_12MHz_b57600 = 0x000d,
ftdi_8U232AM_12MHz_b115200 = 0x4006,
ftdi_8U232AM_12MHz_b230400 = 0x8003,
};
/* Apparently all devices are 48MHz */
enum {
ftdi_8U232AM_48MHz_b300 = 0x2710,
ftdi_8U232AM_48MHz_b600 = 0x1388,
ftdi_8U232AM_48MHz_b1200 = 0x09c4,
ftdi_8U232AM_48MHz_b2400 = 0x04e2,
ftdi_8U232AM_48MHz_b4800 = 0x0271,
ftdi_8U232AM_48MHz_b9600 = 0x4138,
ftdi_8U232AM_48MHz_b19200 = 0x809c,
ftdi_8U232AM_48MHz_b38400 = 0xc04e,
ftdi_8U232AM_48MHz_b57600 = 0x0034,
ftdi_8U232AM_48MHz_b115200 = 0x001a,
ftdi_8U232AM_48MHz_b230400 = 0x000d,
ftdi_8U232AM_48MHz_b460800 = 0x4006,
ftdi_8U232AM_48MHz_b921600 = 0x8003,
};
} FTDI_SIO_baudrate_t ;
/*
* The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
* are calculated internally.
*/
#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
......@@ -443,6 +546,11 @@ enum {
* B7 Error in RCVR FIFO
*
*/
#define FTDI_RS0_CTS (1 << 4)
#define FTDI_RS0_DSR (1 << 5)
#define FTDI_RS0_RI (1 << 6)
#define FTDI_RS0_RLSD (1 << 7)
#define FTDI_RS_DR 1
#define FTDI_RS_OE (1<<1)
#define FTDI_RS_PE (1<<2)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7