Commit d9160afd authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Mauro Carvalho Chehab

[media] s5p-fimc: Use default input DMA burst count

Increase the input DMA "successive burst count" to default
value 4 to improve DMA performance. Minor cleanup.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent e9654ef2
......@@ -417,12 +417,10 @@ void fimc_hw_set_in_dma(struct fimc_ctx *ctx)
| S5P_MSCTRL_C_INT_IN_MASK
| S5P_MSCTRL_2P_IN_ORDER_MASK);
cfg |= (S5P_MSCTRL_FRAME_COUNT(1) | S5P_MSCTRL_INPUT_MEMORY);
cfg |= S5P_MSCTRL_IN_BURST_COUNT(4) | S5P_MSCTRL_INPUT_MEMORY;
switch (frame->fmt->color) {
case S5P_FIMC_RGB565:
case S5P_FIMC_RGB666:
case S5P_FIMC_RGB888:
case S5P_FIMC_RGB565...S5P_FIMC_RGB888:
cfg |= S5P_MSCTRL_INFORMAT_RGB;
break;
case S5P_FIMC_YCBCR420:
......@@ -434,10 +432,7 @@ void fimc_hw_set_in_dma(struct fimc_ctx *ctx)
cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
break;
case S5P_FIMC_YCBYCR422:
case S5P_FIMC_YCRYCB422:
case S5P_FIMC_CBYCRY422:
case S5P_FIMC_CRYCBY422:
case S5P_FIMC_YCBYCR422...S5P_FIMC_CRYCBY422:
if (frame->fmt->colplanes == 1) {
cfg |= ctx->in_order_1p
| S5P_MSCTRL_INFORMAT_YCBCR422_1P;
......
......@@ -210,7 +210,7 @@
/* Input DMA control */
#define S5P_MSCTRL 0xfc
#define S5P_MSCTRL_IN_BURST_COUNT_MASK (3 << 24)
#define S5P_MSCTRL_IN_BURST_COUNT_MASK (0xF << 24)
#define S5P_MSCTRL_2P_IN_ORDER_MASK (3 << 16)
#define S5P_MSCTRL_2P_IN_ORDER_SHIFT 16
#define S5P_MSCTRL_C_INT_IN_3PLANE (0 << 15)
......@@ -237,7 +237,7 @@
#define S5P_MSCTRL_INFORMAT_RGB (3 << 1)
#define S5P_MSCTRL_INFORMAT_MASK (3 << 1)
#define S5P_MSCTRL_ENVID (1 << 0)
#define S5P_MSCTRL_FRAME_COUNT(x) ((x) << 24)
#define S5P_MSCTRL_IN_BURST_COUNT(x) ((x) << 24)
/* Output DMA Y/Cb/Cr offset */
#define S5P_CIOYOFF 0x168
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment