Skip to content

L
linux
Commit d96dac14 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'qcom-emac' 

Timur Tabi says:

====================
net: qcom/emac: simplify support for different SOCs

On SOCs that have the Qualcomm EMAC network controller, the internal
PHY block is always different.  Sometimes the differences are small,
sometimes it might be a completely different IP.  Either way, using version
numbers to differentiate them and putting all of the init code in one
file does not scale.

This patchset does two things:  The first breaks up the current code into
different files, and the second patch adds support for a third SOC, the
Qualcomm Technologies QDF2400 ARM Server SOC.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents f006b2c5 a51f4047
Hide whitespace changes
Inline Side-by-side
Showing with 725 additions and 526 deletions
drivers/net/ethernet/qualcomm/emac/Makefile
View file @ d96dac14
...@@ -4,4 +4,6 @@ ...@@ -4,4 +4,6 @@
obj-$(CONFIG_QCOM_EMAC) += qcom-emac.o obj-$(CONFIG_QCOM_EMAC) += qcom-emac.o
qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o \
emac-sgmii-fsm9900.o emac-sgmii-qdf2432.o \
emac-sgmii-qdf2400.o
drivers/net/ethernet/qualcomm/emac/emac-sgmii-fsm9900.c 0 → 100644
View file @ d96dac14
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Qualcomm Technologies, Inc. FSM9900 EMAC SGMII Controller driver.
*/
#include <linux/iopoll.h>
#include "emac.h"
/* EMAC_QSERDES register offsets */
#define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x0000
#define EMAC_QSERDES_COM_PLL_CNTRL 0x0014
#define EMAC_QSERDES_COM_PLL_IP_SETI 0x0018
#define EMAC_QSERDES_COM_PLL_CP_SETI 0x0024
#define EMAC_QSERDES_COM_PLL_IP_SETP 0x0028
#define EMAC_QSERDES_COM_PLL_CP_SETP 0x002c
#define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x0038
#define EMAC_QSERDES_COM_RESETSM_CNTRL 0x0040
#define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x0044
#define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x0048
#define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x004c
#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x0050
#define EMAC_QSERDES_COM_DEC_START1 0x0064
#define EMAC_QSERDES_COM_DIV_FRAC_START1 0x0098
#define EMAC_QSERDES_COM_DIV_FRAC_START2 0x009c
#define EMAC_QSERDES_COM_DIV_FRAC_START3 0x00a0
#define EMAC_QSERDES_COM_DEC_START2 0x00a4
#define EMAC_QSERDES_COM_PLL_CRCTRL 0x00ac
#define EMAC_QSERDES_COM_RESET_SM 0x00bc
#define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x0100
#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x0108
#define EMAC_QSERDES_TX_TX_DRV_LVL 0x010c
#define EMAC_QSERDES_TX_LANE_MODE 0x0150
#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x0170
#define EMAC_QSERDES_RX_CDR_CONTROL 0x0200
#define EMAC_QSERDES_RX_CDR_CONTROL2 0x0210
#define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x0230
/* EMAC_SGMII register offsets */
#define EMAC_SGMII_PHY_SERDES_START 0x0000
#define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x0004
#define EMAC_SGMII_PHY_RX_PWR_CTRL 0x0008
#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
#define PLL_IPSETI(x) ((x) & 0x3f)
#define PLL_CPSETI(x) ((x) & 0xff)
#define PLL_IPSETP(x) ((x) & 0x3f)
#define PLL_CPSETP(x) ((x) & 0x1f)
#define PLL_RCTRL(x) (((x) & 0xf) << 4)
#define PLL_CCTRL(x) ((x) & 0xf)
#define LANE_MODE(x) ((x) & 0x1f)
#define SYSCLK_CM BIT(4)
#define SYSCLK_AC_COUPLE BIT(3)
#define OCP_EN BIT(5)
#define PLL_DIV_FFEN BIT(2)
#define PLL_DIV_ORD BIT(1)
#define SYSCLK_SEL_CMOS BIT(3)
#define FRQ_TUNE_MODE BIT(4)
#define PLLLOCK_CMP_EN BIT(0)
#define DEC_START1_MUX BIT(7)
#define DEC_START1(x) ((x) & 0x7f)
#define DIV_FRAC_START_MUX BIT(7)
#define DIV_FRAC_START(x) ((x) & 0x7f)
#define DIV_FRAC_START3_MUX BIT(4)
#define DIV_FRAC_START3(x) ((x) & 0xf)
#define DEC_START2_MUX BIT(1)
#define DEC_START2 BIT(0)
#define READY BIT(5)
#define TX_EMP_POST1_LVL_MUX BIT(5)
#define TX_EMP_POST1_LVL(x) ((x) & 0x1f)
#define TX_DRV_LVL_MUX BIT(4)
#define TX_DRV_LVL(x) ((x) & 0xf)
#define EMP_EN_MUX BIT(1)
#define EMP_EN BIT(0)
#define SECONDORDERENABLE BIT(6)
#define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3)
#define SECONDORDERGAIN(x) ((x) & 0x7)
#define RX_EQ_GAIN2(x) (((x) & 0xf) << 4)
#define RX_EQ_GAIN1(x) ((x) & 0xf)
#define SERDES_START BIT(0)
#define BIAS_EN BIT(6)
#define PLL_EN BIT(5)
#define SYSCLK_EN BIT(4)
#define CLKBUF_L_EN BIT(3)
#define PLL_TXCLK_EN BIT(1)
#define PLL_RXCLK_EN BIT(0)
#define L0_RX_SIGDET_EN BIT(7)
#define L0_RX_TERM_MODE(x) (((x) & 3) << 4)
#define L0_RX_I_EN BIT(1)
#define L0_TX_EN BIT(5)
#define L0_CLKBUF_EN BIT(4)
#define L0_TRAN_BIAS_EN BIT(1)
#define L0_RX_EQUALIZE_ENABLE BIT(6)
#define L0_RESET_TSYNC_EN BIT(4)
#define L0_DRV_LVL(x) ((x) & 0xf)
#define PWRDN_B BIT(0)
#define CDR_MAX_CNT(x) ((x) & 0xff)
#define PLLLOCK_CMP(x) ((x) & 0xff)
#define SERDES_START_WAIT_TIMES 100
struct emac_reg_write {
unsigned int offset;
u32 val;
};
static void emac_reg_write_all(void __iomem *base,
const struct emac_reg_write *itr, size_t size)
{
size_t i;
for (i = 0; i < size; ++itr, ++i)
writel(itr->val, base + itr->offset);
}
static const struct emac_reg_write physical_coding_sublayer_programming[] = {
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
{EMAC_SGMII_PHY_CMN_PWR_CTRL,
BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
{EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
{EMAC_SGMII_PHY_RX_PWR_CTRL,
L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
{EMAC_SGMII_PHY_CMN_PWR_CTRL,
BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
PLL_RXCLK_EN},
{EMAC_SGMII_PHY_LANE_CTRL1,
L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
};
static const struct emac_reg_write sysclk_refclk_setting[] = {
{EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
{EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE},
};
static const struct emac_reg_write pll_setting[] = {
{EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
{EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
{EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
{EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
{EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
{EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
{EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
{EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
{EMAC_QSERDES_COM_DIV_FRAC_START1,
DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
{EMAC_QSERDES_COM_DIV_FRAC_START2,
DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
{EMAC_QSERDES_COM_DIV_FRAC_START3,
DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
{EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
{EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
{EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
{EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
{EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
};
static const struct emac_reg_write cdr_setting[] = {
{EMAC_QSERDES_RX_CDR_CONTROL,
SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
{EMAC_QSERDES_RX_CDR_CONTROL2,
SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
};
static const struct emac_reg_write tx_rx_setting[] = {
{EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
{EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
{EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
{EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
{EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
{EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
};
int emac_sgmii_init_fsm9900(struct emac_adapter *adpt)
{
struct emac_phy *phy = &adpt->phy;
unsigned int i;
emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
ARRAY_SIZE(physical_coding_sublayer_programming));
emac_reg_write_all(phy->base, sysclk_refclk_setting,
ARRAY_SIZE(sysclk_refclk_setting));
emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
emac_reg_write_all(phy->base, tx_rx_setting, ARRAY_SIZE(tx_rx_setting));
/* Power up the Ser/Des engine */
writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
break;
usleep_range(100, 200);
}
if (i == SERDES_START_WAIT_TIMES) {
netdev_err(adpt->netdev, "error: ser/des failed to start\n");
return -EIO;
}
/* Mask out all the SGMII Interrupt */
writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
return 0;
}
drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c 0 → 100644
View file @ d96dac14
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Qualcomm Technologies, Inc. QDF2400 EMAC SGMII Controller driver.
*/
#include <linux/iopoll.h>
#include "emac.h"
/* EMAC_SGMII register offsets */
#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
#define EMAC_SGMII_PHY_RESET_CTRL 0x00a8
#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
/* SGMII digital lane registers */
#define EMAC_SGMII_LN_DRVR_CTRL0 0x000C
#define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018
#define EMAC_SGMII_LN_TX_MARGINING 0x001C
#define EMAC_SGMII_LN_TX_PRE 0x0020
#define EMAC_SGMII_LN_TX_POST 0x0024
#define EMAC_SGMII_LN_TX_BAND_MODE 0x0060
#define EMAC_SGMII_LN_LANE_MODE 0x0064
#define EMAC_SGMII_LN_PARALLEL_RATE 0x007C
#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00C0
#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D8
#define EMAC_SGMII_LN_VGA_INITVAL 0x013C
#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x0184
#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0190
#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x019C
#define EMAC_SGMII_LN_RX_BAND 0x01A4
#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01C0
#define EMAC_SGMII_LN_RSM_CONFIG 0x01F8
#define EMAC_SGMII_LN_SIGDET_ENABLES 0x0230
#define EMAC_SGMII_LN_SIGDET_CNTRL 0x0234
#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x0238
#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02AC
#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02B8
#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02C8
/* SGMII digital lane register values */
#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
#define UCDR_ENABLE BIT(6)
#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS4 BIT(7)
#define SIGDET_EN_PS0_TO_PS2 BIT(6)
#define TXVAL_VALID_INIT BIT(4)
#define KR_PCIGEN3_MODE BIT(0)
#define MAIN_EN BIT(0)
#define TX_MARGINING_MUX BIT(6)
#define TX_MARGINING(x) ((x) & 0x3f)
#define TX_PRE_MUX BIT(6)
#define TX_POST_MUX BIT(6)
#define CML_GEAR_MODE(x) (((x) & 7) << 3)
#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
#define MIXER_DATARATE_MODE(x) ((x) & 3)
#define VGA_THRESH_DFE(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
#define SIGDET_FLT_BYP BIT(0)
#define SIGDET_LVL(x) (((x) & 0xf) << 4)
#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
#define INVERT_PCS_RX_CLK BIT(7)
#define DRVR_LOGIC_CLK_EN BIT(4)
#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
#define BAND_MODE0(x) ((x) & 0x3)
#define LANE_MODE(x) ((x) & 0x1f)
#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
#define EN_DLL_MODE0 BIT(4)
#define EN_IQ_DCC_MODE0 BIT(3)
#define EN_IQCAL_MODE0 BIT(2)
#define BYPASS_RSM_SAMP_CAL BIT(1)
#define BYPASS_RSM_DLL_CAL BIT(0)
#define L0_RX_EQUALIZE_ENABLE BIT(6)
#define PWRDN_B BIT(0)
#define CDR_MAX_CNT(x) ((x) & 0xff)
#define SERDES_START_WAIT_TIMES 100
struct emac_reg_write {
unsigned int offset;
u32 val;
};
static void emac_reg_write_all(void __iomem *base,
const struct emac_reg_write *itr, size_t size)
{
size_t i;
for (i = 0; i < size; ++itr, ++i)
writel(itr->val, base + itr->offset);
}
static const struct emac_reg_write sgmii_laned[] = {
/* CDR Settings */
{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
/* TX/RX Settings */
{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
{EMAC_SGMII_LN_CML_CTRL_MODE0,
CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
{EMAC_SGMII_LN_SIGDET_ENABLES,
SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
{EMAC_SGMII_LN_RX_MISC_CNTRL0, INVERT_PCS_RX_CLK},
{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(1)},
{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(2)},
{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(2) |
EN_DLL_MODE0 | EN_IQ_DCC_MODE0 | EN_IQCAL_MODE0},
{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
};
static const struct emac_reg_write physical_coding_sublayer_programming[] = {
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
};
int emac_sgmii_init_qdf2400(struct emac_adapter *adpt)
{
struct emac_phy *phy = &adpt->phy;
void __iomem *phy_regs = phy->base;
void __iomem *laned = phy->digital;
unsigned int i;
u32 lnstatus;
/* PCS lane-x init */
emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
ARRAY_SIZE(physical_coding_sublayer_programming));
/* SGMII lane-x init */
emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
/* Power up PCS and start reset lane state machine */
writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
writel(1, laned + SGMII_LN_RSM_START);
/* Wait for c_ready assertion */
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
if (lnstatus & BIT(1))
break;
usleep_range(100, 200);
}
if (i == SERDES_START_WAIT_TIMES) {
netdev_err(adpt->netdev, "SGMII failed to start\n");
return -EIO;
}
/* Disable digital and SERDES loopback */
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
/* Mask out all the SGMII Interrupt */
writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
return 0;
}
drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c 0 → 100644
View file @ d96dac14
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Qualcomm Technologies, Inc. QDF2432 EMAC SGMII Controller driver.
*/
#include <linux/iopoll.h>
#include "emac.h"
/* EMAC_SGMII register offsets */
#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
#define EMAC_SGMII_PHY_RESET_CTRL 0x00a8
#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
/* SGMII digital lane registers */
#define EMAC_SGMII_LN_DRVR_CTRL0 0x000C
#define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018
#define EMAC_SGMII_LN_TX_MARGINING 0x001C
#define EMAC_SGMII_LN_TX_PRE 0x0020
#define EMAC_SGMII_LN_TX_POST 0x0024
#define EMAC_SGMII_LN_TX_BAND_MODE 0x0060
#define EMAC_SGMII_LN_LANE_MODE 0x0064
#define EMAC_SGMII_LN_PARALLEL_RATE 0x0078
#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00B8
#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D0
#define EMAC_SGMII_LN_VGA_INITVAL 0x0134
#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x017C
#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0188
#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x0194
#define EMAC_SGMII_LN_RX_BAND 0x019C
#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01B8
#define EMAC_SGMII_LN_RSM_CONFIG 0x01F0
#define EMAC_SGMII_LN_SIGDET_ENABLES 0x0224
#define EMAC_SGMII_LN_SIGDET_CNTRL 0x0228
#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x022C
#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02A0
#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02AC
#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02BC
/* SGMII digital lane register values */
#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
#define UCDR_ENABLE BIT(6)
#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS4 BIT(7)
#define SIGDET_EN_PS0_TO_PS2 BIT(6)
#define TXVAL_VALID_INIT BIT(4)
#define KR_PCIGEN3_MODE BIT(0)
#define MAIN_EN BIT(0)
#define TX_MARGINING_MUX BIT(6)
#define TX_MARGINING(x) ((x) & 0x3f)
#define TX_PRE_MUX BIT(6)
#define TX_POST_MUX BIT(6)
#define CML_GEAR_MODE(x) (((x) & 7) << 3)
#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
#define MIXER_DATARATE_MODE(x) ((x) & 3)
#define VGA_THRESH_DFE(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
#define SIGDET_FLT_BYP BIT(0)
#define SIGDET_LVL(x) (((x) & 0xf) << 4)
#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
#define DRVR_LOGIC_CLK_EN BIT(4)
#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
#define BAND_MODE0(x) ((x) & 0x3)
#define LANE_MODE(x) ((x) & 0x1f)
#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
#define BYPASS_RSM_SAMP_CAL BIT(1)
#define BYPASS_RSM_DLL_CAL BIT(0)
#define L0_RX_EQUALIZE_ENABLE BIT(6)
#define PWRDN_B BIT(0)
#define CDR_MAX_CNT(x) ((x) & 0xff)
#define SERDES_START_WAIT_TIMES 100
struct emac_reg_write {
unsigned int offset;
u32 val;
};
static void emac_reg_write_all(void __iomem *base,
const struct emac_reg_write *itr, size_t size)
{
size_t i;
for (i = 0; i < size; ++itr, ++i)
writel(itr->val, base + itr->offset);
}
static const struct emac_reg_write sgmii_laned[] = {
/* CDR Settings */
{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
/* TX/RX Settings */
{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
{EMAC_SGMII_LN_CML_CTRL_MODE0,
CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
{EMAC_SGMII_LN_SIGDET_ENABLES,
SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
{EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
};
static const struct emac_reg_write physical_coding_sublayer_programming[] = {
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
};
int emac_sgmii_init_qdf2432(struct emac_adapter *adpt)
{
struct emac_phy *phy = &adpt->phy;
void __iomem *phy_regs = phy->base;
void __iomem *laned = phy->digital;
unsigned int i;
u32 lnstatus;
/* PCS lane-x init */
emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
ARRAY_SIZE(physical_coding_sublayer_programming));
/* SGMII lane-x init */
emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
/* Power up PCS and start reset lane state machine */
writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
writel(1, laned + SGMII_LN_RSM_START);
/* Wait for c_ready assertion */
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
if (lnstatus & BIT(1))
break;
usleep_range(100, 200);
}
if (i == SERDES_START_WAIT_TIMES) {
netdev_err(adpt->netdev, "SGMII failed to start\n");
return -EIO;
}
/* Disable digital and SERDES loopback */
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
/* Mask out all the SGMII Interrupt */
writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
return 0;
}
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
View file @ d96dac14
...@@ -20,448 +20,33 @@ ...@@ -20,448 +20,33 @@
#include "emac-mac.h" #include "emac-mac.h"
#include "emac-sgmii.h" #include "emac-sgmii.h"
/* EMAC_QSERDES register offsets */
#define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x000000
#define EMAC_QSERDES_COM_PLL_CNTRL 0x000014
#define EMAC_QSERDES_COM_PLL_IP_SETI 0x000018
#define EMAC_QSERDES_COM_PLL_CP_SETI 0x000024
#define EMAC_QSERDES_COM_PLL_IP_SETP 0x000028
#define EMAC_QSERDES_COM_PLL_CP_SETP 0x00002c
#define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x000038
#define EMAC_QSERDES_COM_RESETSM_CNTRL 0x000040
#define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x000044
#define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x000048
#define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x00004c
#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x000050
#define EMAC_QSERDES_COM_DEC_START1 0x000064
#define EMAC_QSERDES_COM_DIV_FRAC_START1 0x000098
#define EMAC_QSERDES_COM_DIV_FRAC_START2 0x00009c
#define EMAC_QSERDES_COM_DIV_FRAC_START3 0x0000a0
#define EMAC_QSERDES_COM_DEC_START2 0x0000a4
#define EMAC_QSERDES_COM_PLL_CRCTRL 0x0000ac
#define EMAC_QSERDES_COM_RESET_SM 0x0000bc
#define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x000100
#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x000108
#define EMAC_QSERDES_TX_TX_DRV_LVL 0x00010c
#define EMAC_QSERDES_TX_LANE_MODE 0x000150
#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x000170
#define EMAC_QSERDES_RX_CDR_CONTROL 0x000200
#define EMAC_QSERDES_RX_CDR_CONTROL2 0x000210
#define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x000230
/* EMAC_SGMII register offsets */ /* EMAC_SGMII register offsets */
#define EMAC_SGMII_PHY_SERDES_START 0x000000 #define EMAC_SGMII_PHY_AUTONEG_CFG2 0x0048
#define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x000004 #define EMAC_SGMII_PHY_SPEED_CFG1 0x0074
#define EMAC_SGMII_PHY_RX_PWR_CTRL 0x000008 #define EMAC_SGMII_PHY_IRQ_CMD 0x00ac
#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x00000C #define EMAC_SGMII_PHY_INTERRUPT_CLEAR 0x00b0
#define EMAC_SGMII_PHY_LANE_CTRL1 0x000018 #define EMAC_SGMII_PHY_INTERRUPT_STATUS 0x00b8
#define EMAC_SGMII_PHY_AUTONEG_CFG2 0x000048
#define EMAC_SGMII_PHY_CDR_CTRL0 0x000058
#define EMAC_SGMII_PHY_SPEED_CFG1 0x000074
#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x000080
#define EMAC_SGMII_PHY_RESET_CTRL 0x0000a8
#define EMAC_SGMII_PHY_IRQ_CMD 0x0000ac
#define EMAC_SGMII_PHY_INTERRUPT_CLEAR 0x0000b0
#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x0000b4
#define EMAC_SGMII_PHY_INTERRUPT_STATUS 0x0000b8
#define EMAC_SGMII_PHY_RX_CHK_STATUS 0x0000d4
#define EMAC_SGMII_PHY_AUTONEG0_STATUS 0x0000e0
#define EMAC_SGMII_PHY_AUTONEG1_STATUS 0x0000e4
/* EMAC_QSERDES_COM_PLL_IP_SETI */
#define PLL_IPSETI(x) ((x) & 0x3f)
/* EMAC_QSERDES_COM_PLL_CP_SETI */
#define PLL_CPSETI(x) ((x) & 0xff)
/* EMAC_QSERDES_COM_PLL_IP_SETP */
#define PLL_IPSETP(x) ((x) & 0x3f)
/* EMAC_QSERDES_COM_PLL_CP_SETP */
#define PLL_CPSETP(x) ((x) & 0x1f)
/* EMAC_QSERDES_COM_PLL_CRCTRL */
#define PLL_RCTRL(x) (((x) & 0xf) << 4)
#define PLL_CCTRL(x) ((x) & 0xf)
/* SGMII v2 PHY registers per lane */
#define EMAC_SGMII_PHY_LN_OFFSET 0x0400
/* SGMII v2 digital lane registers */
#define EMAC_SGMII_LN_DRVR_CTRL0 0x00C
#define EMAC_SGMII_LN_DRVR_TAP_EN 0x018
#define EMAC_SGMII_LN_TX_MARGINING 0x01C
#define EMAC_SGMII_LN_TX_PRE 0x020
#define EMAC_SGMII_LN_TX_POST 0x024
#define EMAC_SGMII_LN_TX_BAND_MODE 0x060
#define EMAC_SGMII_LN_LANE_MODE 0x064
#define EMAC_SGMII_LN_PARALLEL_RATE 0x078
#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x0B8
#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x0D0
#define EMAC_SGMII_LN_VGA_INITVAL 0x134
#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x17C
#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x188
#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x194
#define EMAC_SGMII_LN_RX_BAND 0x19C
#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x1B8
#define EMAC_SGMII_LN_RSM_CONFIG 0x1F0
#define EMAC_SGMII_LN_SIGDET_ENABLES 0x224
#define EMAC_SGMII_LN_SIGDET_CNTRL 0x228
#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x22C
#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x2A0
#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x2AC
#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x2BC
/* SGMII v2 digital lane register values */
#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
#define UCDR_ENABLE BIT(6)
#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS4 BIT(7)
#define SIGDET_EN_PS0_TO_PS2 BIT(6)
#define EN_ACCOUPLEVCM_SW_MUX BIT(5)
#define EN_ACCOUPLEVCM_SW BIT(4)
#define RX_SYNC_EN BIT(3)
#define RXTERM_HIGHZ_PS5 BIT(2)
#define SIGDET_EN_PS3 BIT(1)
#define EN_ACCOUPLE_VCM_PS3 BIT(0)
#define UFS_MODE BIT(5)
#define TXVAL_VALID_INIT BIT(4)
#define TXVAL_VALID_MUX BIT(3)
#define TXVAL_VALID BIT(2)
#define USB3P1_MODE BIT(1)
#define KR_PCIGEN3_MODE BIT(0)
#define PRE_EN BIT(3)
#define POST_EN BIT(2)
#define MAIN_EN_MUX BIT(1)
#define MAIN_EN BIT(0)
#define TX_MARGINING_MUX BIT(6)
#define TX_MARGINING(x) ((x) & 0x3f)
#define TX_PRE_MUX BIT(6)
#define TX_PRE(x) ((x) & 0x3f)
#define TX_POST_MUX BIT(6)
#define TX_POST(x) ((x) & 0x3f)
#define CML_GEAR_MODE(x) (((x) & 7) << 3)
#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
#define MIXER_DATARATE_MODE(x) ((x) & 3)
#define VGA_THRESH_DFE(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
#define SIGDET_LP_BYP_MUX BIT(4)
#define SIGDET_LP_BYP BIT(3)
#define SIGDET_EN_MUX BIT(2)
#define SIGDET_EN BIT(1)
#define SIGDET_FLT_BYP BIT(0)
#define SIGDET_LVL(x) (((x) & 0xf) << 4)
#define SIGDET_BW_CTRL(x) ((x) & 0xf)
#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
#define SIGDET_DEGLITCH_BYP BIT(0)
#define INVERT_PCS_RX_CLK BIT(7)
#define PWM_EN BIT(6)
#define RXBIAS_SEL(x) (((x) & 0x3) << 4)
#define EBDAC_SIGN BIT(3)
#define EDAC_SIGN BIT(2)
#define EN_AUXTAP1SIGN_INVERT BIT(1)
#define EN_DAC_CHOPPING BIT(0)
#define DRVR_LOGIC_CLK_EN BIT(4)
#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
#define PARALLEL_RATE_MODE2(x) (((x) & 0x3) << 4)
#define PARALLEL_RATE_MODE1(x) (((x) & 0x3) << 2)
#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
#define BAND_MODE2(x) (((x) & 0x3) << 4)
#define BAND_MODE1(x) (((x) & 0x3) << 2)
#define BAND_MODE0(x) ((x) & 0x3)
#define LANE_SYNC_MODE BIT(5)
#define LANE_MODE(x) ((x) & 0x1f)
#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
#define EN_DLL_MODE0 BIT(4)
#define EN_IQ_DCC_MODE0 BIT(3)
#define EN_IQCAL_MODE0 BIT(2)
#define EN_QPATH_MODE0 BIT(1)
#define EN_EPATH_MODE0 BIT(0)
#define FORCE_TSYNC_ACK BIT(7)
#define FORCE_CMN_ACK BIT(6)
#define FORCE_CMN_READY BIT(5)
#define EN_RCLK_DEGLITCH BIT(4)
#define BYPASS_RSM_CDR_RESET BIT(3)
#define BYPASS_RSM_TSYNC BIT(2)
#define BYPASS_RSM_SAMP_CAL BIT(1)
#define BYPASS_RSM_DLL_CAL BIT(0)
/* EMAC_QSERDES_COM_SYS_CLK_CTRL */
#define SYSCLK_CM BIT(4)
#define SYSCLK_AC_COUPLE BIT(3)
/* EMAC_QSERDES_COM_PLL_CNTRL */
#define OCP_EN BIT(5)
#define PLL_DIV_FFEN BIT(2)
#define PLL_DIV_ORD BIT(1)
/* EMAC_QSERDES_COM_SYSCLK_EN_SEL */
#define SYSCLK_SEL_CMOS BIT(3)
/* EMAC_QSERDES_COM_RESETSM_CNTRL */
#define FRQ_TUNE_MODE BIT(4)
/* EMAC_QSERDES_COM_PLLLOCK_CMP_EN */
#define PLLLOCK_CMP_EN BIT(0)
/* EMAC_QSERDES_COM_DEC_START1 */
#define DEC_START1_MUX BIT(7)
#define DEC_START1(x) ((x) & 0x7f)
/* EMAC_QSERDES_COM_DIV_FRAC_START1 * EMAC_QSERDES_COM_DIV_FRAC_START2 */
#define DIV_FRAC_START_MUX BIT(7)
#define DIV_FRAC_START(x) ((x) & 0x7f)
/* EMAC_QSERDES_COM_DIV_FRAC_START3 */
#define DIV_FRAC_START3_MUX BIT(4)
#define DIV_FRAC_START3(x) ((x) & 0xf)
/* EMAC_QSERDES_COM_DEC_START2 */
#define DEC_START2_MUX BIT(1)
#define DEC_START2 BIT(0)
/* EMAC_QSERDES_COM_RESET_SM */
#define READY BIT(5)
/* EMAC_QSERDES_TX_TX_EMP_POST1_LVL */
#define TX_EMP_POST1_LVL_MUX BIT(5)
#define TX_EMP_POST1_LVL(x) ((x) & 0x1f)
#define TX_EMP_POST1_LVL_BMSK 0x1f
#define TX_EMP_POST1_LVL_SHFT 0
/* EMAC_QSERDES_TX_TX_DRV_LVL */
#define TX_DRV_LVL_MUX BIT(4)
#define TX_DRV_LVL(x) ((x) & 0xf)
/* EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN */
#define EMP_EN_MUX BIT(1)
#define EMP_EN BIT(0)
/* EMAC_QSERDES_RX_CDR_CONTROL & EMAC_QSERDES_RX_CDR_CONTROL2 */
#define HBW_PD_EN BIT(7)
#define SECONDORDERENABLE BIT(6)
#define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3)
#define SECONDORDERGAIN(x) ((x) & 0x7)
/* EMAC_QSERDES_RX_RX_EQ_GAIN12 */
#define RX_EQ_GAIN2(x) (((x) & 0xf) << 4)
#define RX_EQ_GAIN1(x) ((x) & 0xf)
/* EMAC_SGMII_PHY_SERDES_START */
#define SERDES_START BIT(0)
/* EMAC_SGMII_PHY_CMN_PWR_CTRL */
#define BIAS_EN BIT(6)
#define PLL_EN BIT(5)
#define SYSCLK_EN BIT(4)
#define CLKBUF_L_EN BIT(3)
#define PLL_TXCLK_EN BIT(1)
#define PLL_RXCLK_EN BIT(0)
/* EMAC_SGMII_PHY_RX_PWR_CTRL */
#define L0_RX_SIGDET_EN BIT(7)
#define L0_RX_TERM_MODE(x) (((x) & 3) << 4)
#define L0_RX_I_EN BIT(1)
/* EMAC_SGMII_PHY_TX_PWR_CTRL */
#define L0_TX_EN BIT(5)
#define L0_CLKBUF_EN BIT(4)
#define L0_TRAN_BIAS_EN BIT(1)
/* EMAC_SGMII_PHY_LANE_CTRL1 */
#define L0_RX_EQUALIZE_ENABLE BIT(6)
#define L0_RESET_TSYNC_EN BIT(4)
#define L0_DRV_LVL(x) ((x) & 0xf)
/* EMAC_SGMII_PHY_AUTONEG_CFG2 */
#define FORCE_AN_TX_CFG BIT(5) #define FORCE_AN_TX_CFG BIT(5)
#define FORCE_AN_RX_CFG BIT(4) #define FORCE_AN_RX_CFG BIT(4)
#define AN_ENABLE BIT(0) #define AN_ENABLE BIT(0)
/* EMAC_SGMII_PHY_SPEED_CFG1 */
#define DUPLEX_MODE BIT(4) #define DUPLEX_MODE BIT(4)
#define SPDMODE_1000 BIT(1) #define SPDMODE_1000 BIT(1)
#define SPDMODE_100 BIT(0) #define SPDMODE_100 BIT(0)
#define SPDMODE_10 0 #define SPDMODE_10 0
#define SPDMODE_BMSK 3
#define SPDMODE_SHFT 0
/* EMAC_SGMII_PHY_POW_DWN_CTRL0 */
#define PWRDN_B BIT(0)
#define CDR_MAX_CNT(x) ((x) & 0xff)
/* EMAC_QSERDES_TX_BIST_MODE_LANENO */
#define BIST_LANE_NUMBER(x) (((x) & 3) << 5)
#define BISTMODE(x) ((x) & 0x1f)
/* EMAC_QSERDES_COM_PLLLOCK_CMPx */
#define PLLLOCK_CMP(x) ((x) & 0xff)
/* EMAC_SGMII_PHY_RESET_CTRL */
#define PHY_SW_RESET BIT(0)
/* EMAC_SGMII_PHY_IRQ_CMD */
#define IRQ_GLOBAL_CLEAR BIT(0) #define IRQ_GLOBAL_CLEAR BIT(0)
/* EMAC_SGMII_PHY_INTERRUPT_MASK */
#define DECODE_CODE_ERR BIT(7) #define DECODE_CODE_ERR BIT(7)
#define DECODE_DISP_ERR BIT(6) #define DECODE_DISP_ERR BIT(6)
#define PLL_UNLOCK BIT(5)
#define AN_ILLEGAL_TERM BIT(4)
#define SYNC_FAIL BIT(3)
#define AN_START BIT(2)
#define AN_END BIT(1)
#define AN_REQUEST BIT(0)
#define SGMII_PHY_IRQ_CLR_WAIT_TIME 10 #define SGMII_PHY_IRQ_CLR_WAIT_TIME 10
#define SGMII_PHY_INTERRUPT_ERR (\ #define SGMII_PHY_INTERRUPT_ERR (DECODE_CODE_ERR | DECODE_DISP_ERR)
DECODE_CODE_ERR |\
DECODE_DISP_ERR)
#define SGMII_ISR_AN_MASK (\
AN_REQUEST |\
AN_START |\
AN_END |\
AN_ILLEGAL_TERM |\
PLL_UNLOCK |\
SYNC_FAIL)
#define SGMII_ISR_MASK (\
SGMII_PHY_INTERRUPT_ERR |\
SGMII_ISR_AN_MASK)
/* SGMII TX_CONFIG */
#define TXCFG_LINK 0x8000
#define TXCFG_MODE_BMSK 0x1c00
#define TXCFG_1000_FULL 0x1800
#define TXCFG_100_FULL 0x1400
#define TXCFG_100_HALF 0x0400
#define TXCFG_10_FULL 0x1000
#define TXCFG_10_HALF 0x0000
#define SERDES_START_WAIT_TIMES 100 #define SERDES_START_WAIT_TIMES 100
struct emac_reg_write {
unsigned int offset;
u32 val;
};
static void emac_reg_write_all(void __iomem *base,
const struct emac_reg_write *itr, size_t size)
{
size_t i;
for (i = 0; i < size; ++itr, ++i)
writel(itr->val, base + itr->offset);
}
static const struct emac_reg_write physical_coding_sublayer_programming_v1[] = {
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
{EMAC_SGMII_PHY_CMN_PWR_CTRL,
BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN},
{EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN},
{EMAC_SGMII_PHY_RX_PWR_CTRL,
L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN},
{EMAC_SGMII_PHY_CMN_PWR_CTRL,
BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN |
PLL_RXCLK_EN},
{EMAC_SGMII_PHY_LANE_CTRL1,
L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)},
};
static const struct emac_reg_write sysclk_refclk_setting[] = {
{EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS},
{EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE},
};
static const struct emac_reg_write pll_setting[] = {
{EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)},
{EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)},
{EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)},
{EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)},
{EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)},
{EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD},
{EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)},
{EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2},
{EMAC_QSERDES_COM_DIV_FRAC_START1,
DIV_FRAC_START_MUX | DIV_FRAC_START(85)},
{EMAC_QSERDES_COM_DIV_FRAC_START2,
DIV_FRAC_START_MUX | DIV_FRAC_START(42)},
{EMAC_QSERDES_COM_DIV_FRAC_START3,
DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)},
{EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)},
{EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)},
{EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)},
{EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN},
{EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE},
};
static const struct emac_reg_write cdr_setting[] = {
{EMAC_QSERDES_RX_CDR_CONTROL,
SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)},
{EMAC_QSERDES_RX_CDR_CONTROL2,
SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)},
};
static const struct emac_reg_write tx_rx_setting[] = {
{EMAC_QSERDES_TX_BIST_MODE_LANENO, 0},
{EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)},
{EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN},
{EMAC_QSERDES_TX_TX_EMP_POST1_LVL,
TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)},
{EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)},
{EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)},
};
static const struct emac_reg_write sgmii_v2_laned[] = {
/* CDR Settings */
{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
/* TX/RX Settings */
{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
{EMAC_SGMII_LN_CML_CTRL_MODE0,
CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
{EMAC_SGMII_LN_SIGDET_ENABLES,
SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
{EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
};
static const struct emac_reg_write physical_coding_sublayer_programming_v2[] = {
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
};
static int emac_sgmii_link_init(struct emac_adapter *adpt) static int emac_sgmii_link_init(struct emac_adapter *adpt)
{ {
struct phy_device *phydev = adpt->phydev; struct phy_device *phydev = adpt->phydev;
...@@ -536,98 +121,6 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits) ...@@ -536,98 +121,6 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
return 0; return 0;
} }
int emac_sgmii_init_v1(struct emac_adapter *adpt)
{
struct emac_phy *phy = &adpt->phy;
unsigned int i;
int ret;
ret = emac_sgmii_link_init(adpt);
if (ret)
return ret;
emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v1,
ARRAY_SIZE(physical_coding_sublayer_programming_v1));
emac_reg_write_all(phy->base, sysclk_refclk_setting,
ARRAY_SIZE(sysclk_refclk_setting));
emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting));
emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting));
emac_reg_write_all(phy->base, tx_rx_setting,
ARRAY_SIZE(tx_rx_setting));
/* Power up the Ser/Des engine */
writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START);
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY)
break;
usleep_range(100, 200);
}
if (i == SERDES_START_WAIT_TIMES) {
netdev_err(adpt->netdev, "error: ser/des failed to start\n");
return -EIO;
}
/* Mask out all the SGMII Interrupt */
writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK);
emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
return 0;
}
int emac_sgmii_init_v2(struct emac_adapter *adpt)
{
struct emac_phy *phy = &adpt->phy;
void __iomem *phy_regs = phy->base;
void __iomem *laned = phy->digital;
unsigned int i;
u32 lnstatus;
int ret;
ret = emac_sgmii_link_init(adpt);
if (ret)
return ret;
/* PCS lane-x init */
emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v2,
ARRAY_SIZE(physical_coding_sublayer_programming_v2));
/* SGMII lane-x init */
emac_reg_write_all(phy->digital,
sgmii_v2_laned, ARRAY_SIZE(sgmii_v2_laned));
/* Power up PCS and start reset lane state machine */
writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
writel(1, laned + SGMII_LN_RSM_START);
/* Wait for c_ready assertion */
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
if (lnstatus & BIT(1))
break;
usleep_range(100, 200);
}
if (i == SERDES_START_WAIT_TIMES) {
netdev_err(adpt->netdev, "SGMII failed to start\n");
return -EIO;
}
/* Disable digital and SERDES loopback */
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
/* Mask out all the SGMII Interrupt */
writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
return 0;
}
static void emac_sgmii_reset_prepare(struct emac_adapter *adpt) static void emac_sgmii_reset_prepare(struct emac_adapter *adpt)
{ {
struct emac_phy *phy = &adpt->phy; struct emac_phy *phy = &adpt->phy;
...@@ -651,44 +144,72 @@ void emac_sgmii_reset(struct emac_adapter *adpt) ...@@ -651,44 +144,72 @@ void emac_sgmii_reset(struct emac_adapter *adpt)
{ {
int ret; int ret;
clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 19200000);
emac_sgmii_reset_prepare(adpt); emac_sgmii_reset_prepare(adpt);
ret = emac_sgmii_link_init(adpt);
if (ret) {
netdev_err(adpt->netdev, "unsupported link speed\n");
return;
}
ret = adpt->phy.initialize(adpt); ret = adpt->phy.initialize(adpt);
if (ret) if (ret)
netdev_err(adpt->netdev, netdev_err(adpt->netdev,
"could not reinitialize internal PHY (error=%i)\n", "could not reinitialize internal PHY (error=%i)\n",
ret); ret);
clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000);
} }
static int emac_sgmii_acpi_match(struct device *dev, void *data) static int emac_sgmii_acpi_match(struct device *dev, void *data)
{ {
#ifdef CONFIG_ACPI
static const struct acpi_device_id match_table[] = { static const struct acpi_device_id match_table[] = {
{ {
.id = "QCOM8071", .id = "QCOM8071",
.driver_data = (kernel_ulong_t)emac_sgmii_init_v2,
}, },
{} {}
}; };
const struct acpi_device_id *id = acpi_match_device(match_table, dev); const struct acpi_device_id *id = acpi_match_device(match_table, dev);
emac_sgmii_initialize *initialize = data; emac_sgmii_initialize *initialize = data;
if (id) if (id) {
*initialize = (emac_sgmii_initialize)id->driver_data; acpi_handle handle = ACPI_HANDLE(dev);
unsigned long long hrv;
acpi_status status;
status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
if (status) {
if (status == AE_NOT_FOUND)
/* Older versions of the QDF2432 ACPI tables do
* not have an _HRV property.
*/
hrv = 1;
else
/* Something is wrong with the tables */
return 0;
}
return !!id; switch (hrv) {
case 1:
*initialize = emac_sgmii_init_qdf2432;
return 1;
case 2:
*initialize = emac_sgmii_init_qdf2400;
return 1;
}
}
#endif
return 0;
} }
static const struct of_device_id emac_sgmii_dt_match[] = { static const struct of_device_id emac_sgmii_dt_match[] = {
{ {
.compatible = "qcom,fsm9900-emac-sgmii", .compatible = "qcom,fsm9900-emac-sgmii",
.data = emac_sgmii_init_v1, .data = emac_sgmii_init_fsm9900,
}, },
{ {
.compatible = "qcom,qdf2432-emac-sgmii", .compatible = "qcom,qdf2432-emac-sgmii",
.data = emac_sgmii_init_v2, .data = emac_sgmii_init_qdf2432,
}, },
{} {}
}; };
...@@ -765,6 +286,8 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) ...@@ -765,6 +286,8 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
if (ret) if (ret)
goto error; goto error;
emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR);
/* We've remapped the addresses, so we don't need the device any /* We've remapped the addresses, so we don't need the device any
* more. of_find_device_by_node() says we should release it. * more. of_find_device_by_node() says we should release it.
*/ */
......
drivers/net/ethernet/qualcomm/emac/emac-sgmii.h
View file @ d96dac14
...@@ -16,9 +16,11 @@ ...@@ -16,9 +16,11 @@
struct emac_adapter; struct emac_adapter;
struct platform_device; struct platform_device;
int emac_sgmii_init_v1(struct emac_adapter *adpt);
int emac_sgmii_init_v2(struct emac_adapter *adpt);
int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt); int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt);
void emac_sgmii_reset(struct emac_adapter *adpt); void emac_sgmii_reset(struct emac_adapter *adpt);
int emac_sgmii_init_fsm9900(struct emac_adapter *adpt);
int emac_sgmii_init_qdf2432(struct emac_adapter *adpt);
int emac_sgmii_init_qdf2400(struct emac_adapter *adpt);
#endif #endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7