Skip to content

L
linux
Commit da1677b0 authored by Vineet Gupta's avatar Vineet Gupta
Browse files
Options

ARC: Disintegrate arcregs.h 

* Move the various sub-system defines/types into relevant files/functions
  (reduces compilation time)

* move CPU specific stuff out of asm/tlb.h into asm/mmu.h
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 18437347
Hide whitespace changes
Inline Side-by-side
Showing with 139 additions and 162 deletions
arch/arc/include/asm/arcregs.h
View file @ da1677b0
......@@ -20,7 +20,6 @@
#define ARC_REG_PERIBASE_BCR 0x69
#define ARC_REG_FP_BCR 0x6B /* Single-Precision FPU */
#define ARC_REG_DPFP_BCR 0x6C /* Dbl Precision FPU */
#define ARC_REG_MMU_BCR 0x6f
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_ICCM_BCR 0x78
......@@ -34,22 +33,12 @@
#define ARC_REG_D_UNCACH_BCR 0x6A
/* status32 Bits Positions */
#define STATUS_H_BIT 0 /* CPU Halted */
#define STATUS_E1_BIT 1 /* Int 1 enable */
#define STATUS_E2_BIT 2 /* Int 2 enable */
#define STATUS_A1_BIT 3 /* Int 1 active */
#define STATUS_A2_BIT 4 /* Int 2 active */
#define STATUS_AE_BIT 5 /* Exception active */
#define STATUS_DE_BIT 6 /* PC is in delay slot */
#define STATUS_U_BIT 7 /* User/Kernel mode */
#define STATUS_L_BIT 12 /* Loop inhibit */
/* These masks correspond to the status word(STATUS_32) bits */
#define STATUS_H_MASK (1<<STATUS_H_BIT)
#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
#define STATUS_AE_MASK (1<<STATUS_AE_BIT)
#define STATUS_DE_MASK (1<<STATUS_DE_BIT)
#define STATUS_U_MASK (1<<STATUS_U_BIT)
......@@ -87,86 +76,7 @@
/* Auxiliary registers */
#define AUX_IDENTITY 4
#define AUX_INTR_VEC_BASE 0x25
#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_LV12 0x43 /* interrupt level register */
#define AUX_IENABLE 0x40c
#define AUX_ITRIGGER 0x40d
#define AUX_IPULSE 0x415
/* Timer related Aux registers */
#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
#define TIMER_CTRL_IE (1 << 0) /* Interupt when Count reachs limit */
#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
/* MMU Management regs */
#define ARC_REG_TLBPD0 0x405
#define ARC_REG_TLBPD1 0x406
#define ARC_REG_TLBINDEX 0x407
#define ARC_REG_TLBCOMMAND 0x408
#define ARC_REG_PID 0x409
#define ARC_REG_SCRATCH_DATA0 0x418
/* Bits in MMU PID register */
#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/* Error code if probe fails */
#define TLB_LKUP_ERR 0x80000000
/* TLB Commands */
#define TLBWrite 0x1
#define TLBRead 0x2
#define TLBGetIndex 0x3
#define TLBProbe 0x4
#if (CONFIG_ARC_MMU_VER >= 2)
#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */
#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */
#else
#undef TLBWriteNI /* These cmds don't exist on older MMU */
#undef TLBIVUTLB
#endif
/* Instruction cache related Auxiliary registers */
#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_IC_PTAG 0x1E
#endif
/* Bit val in IC_CTRL */
#define IC_CTRL_CACHE_DISABLE 0x1
/* Data cache related Auxiliary registers */
#define ARC_REG_DC_BCR 0x72
#define ARC_REG_DC_IVDC 0x47
#define ARC_REG_DC_CTRL 0x48
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_DC_PTAG 0x5C
#endif
/* Bit val in DC_CTRL */
#define DC_CTRL_INV_MODE_FLUSH 0x40
#define DC_CTRL_FLUSH_STATUS 0x100
/* MMU Management regs */
#define ARC_REG_PID 0x409
#define ARC_REG_SCRATCH_DATA0 0x418
/* Bits in MMU PID register */
#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/*
* Floating Pt Registers
......@@ -293,24 +203,6 @@ struct bcr_identity {
#endif
};
struct bcr_mmu_1_2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
#else
unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
#endif
};
struct bcr_mmu_3 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
u_itlb:4, u_dtlb:4;
#else
unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
ways:4, ver:8;
#endif
};
#define EXTN_SWAP_VALID 0x1
#define EXTN_NORM_VALID 0x2
#define EXTN_MINMAX_VALID 0x2
......@@ -343,14 +235,6 @@ struct bcr_extn_xymem {
#endif
};
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
};
struct bcr_perip {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int start:8, pad2:8, sz:8, pad:8;
......
arch/arc/include/asm/cache.h
View file @ da1677b0
......@@ -9,8 +9,6 @@
#ifndef __ARC_ASM_CACHE_H
#define __ARC_ASM_CACHE_H
#include <asm/mmu.h> /* some of cache registers depend on MMU ver */
/* In case $$ not config, setup a dummy number for rest of kernel */
#ifndef CONFIG_ARC_CACHE_LINE_SHIFT
#define L1_CACHE_SHIFT 6
......@@ -36,6 +34,13 @@
#define is_not_cache_aligned(p) ((unsigned long)p & (~DCACHE_LINE_MASK))
#endif
/*
* ARC700 doesn't cache any access in top 256M.
* Ideal for wiring memory mapped peripherals as we don't need to do
* explicit uncached accesses (LD.di/ST.di) hence more portable drivers
*/
#define ARC_UNCACHED_ADDR_SPACE 0xc0000000
#ifndef __ASSEMBLY__
/* Uncached access macros */
......@@ -59,16 +64,10 @@
#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
/*
* ARC700 doesn't cache any access in top 256M.
* Ideal for wiring memory mapped peripherals as we don't need to do
* explicit uncached accesses (LD.di/ST.di) hence more portable drivers
*/
#define ARC_UNCACHED_ADDR_SPACE 0xc0000000
extern void arc_cache_init(void);
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
extern void __init read_decode_cache_bcr(void);
#endif
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_CACHE_H */
arch/arc/include/asm/irqflags.h
View file @ da1677b0
......@@ -19,6 +19,26 @@
#include <asm/arcregs.h>
/* status32 Reg bits related to Interrupt Handling */
#define STATUS_E1_BIT 1 /* Int 1 enable */
#define STATUS_E2_BIT 2 /* Int 2 enable */
#define STATUS_A1_BIT 3 /* Int 1 active */
#define STATUS_A2_BIT 4 /* Int 2 active */
#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
/* Other Interrupt Handling related Aux regs */
#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_LV12 0x43 /* interrupt level register */
#define AUX_IENABLE 0x40c
#define AUX_ITRIGGER 0x40d
#define AUX_IPULSE 0x415
#ifndef __ASSEMBLY__
/******************************************************************
......
arch/arc/include/asm/mmu.h
View file @ da1677b0
......@@ -17,6 +17,32 @@
#define CONFIG_ARC_MMU_VER 3
#endif
/* MMU Management regs */
#define ARC_REG_MMU_BCR 0x06f
#define ARC_REG_TLBPD0 0x405
#define ARC_REG_TLBPD1 0x406
#define ARC_REG_TLBINDEX 0x407
#define ARC_REG_TLBCOMMAND 0x408
#define ARC_REG_PID 0x409
#define ARC_REG_SCRATCH_DATA0 0x418
/* Bits in MMU PID register */
#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/* Error code if probe fails */
#define TLB_LKUP_ERR 0x80000000
/* TLB Commands */
#define TLBWrite 0x1
#define TLBRead 0x2
#define TLBGetIndex 0x3
#define TLBProbe 0x4
#if (CONFIG_ARC_MMU_VER >= 2)
#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */
#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */
#endif
#ifndef __ASSEMBLY__
typedef struct {
......@@ -26,6 +52,16 @@ typedef struct {
#endif
} mm_context_t;
#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
void tlb_paranoid_check(unsigned int pid_sw, unsigned long address);
#else
#define tlb_paranoid_check(a, b)
#endif
void arc_mmu_init(void);
extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
void __init read_decode_mmu_bcr(void);
#endif /* !__ASSEMBLY__ */
#endif
arch/arc/include/asm/pgtable.h
View file @ da1677b0
......@@ -135,6 +135,12 @@
/* ioremap */
#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
/* Masks for actual TLB "PD"s */
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \
_PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
*
......
arch/arc/include/asm/tlb-mmu1.h
View file @ da1677b0
......@@ -10,7 +10,6 @@
#define __ASM_TLB_MMU_V1_H__
#include <asm/mmu.h>
#include <asm/tlb.h>
#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
......
arch/arc/include/asm/tlb.h
View file @ da1677b0
......@@ -9,18 +9,6 @@
#ifndef _ASM_ARC_TLB_H
#define _ASM_ARC_TLB_H
#ifdef __KERNEL__
#include <asm/pgtable.h>
/* Masks for actual TLB "PD"s */
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \
_PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
#ifndef __ASSEMBLY__
#define tlb_flush(tlb) \
do { \
if (tlb->fullmm) \
......@@ -56,18 +44,4 @@ do { \
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
void tlb_paranoid_check(unsigned int pid_sw, unsigned long address);
#else
#define tlb_paranoid_check(a, b)
#endif
void arc_mmu_init(void);
extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
void __init read_decode_mmu_bcr(void);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_ARC_TLB_H */
arch/arc/kernel/time.c
View file @ da1677b0
......@@ -44,6 +44,17 @@
#include <asm/clk.h>
#include <asm/mach_desc.h>
/* Timer related Aux registers */
#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
#define TIMER_CTRL_IE (1 << 0) /* Interupt when Count reachs limit */
#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
#define ARC_TIMER_MAX 0xFFFFFFFF
/********** Clock Source Device *********/
......
arch/arc/mm/cache_arc700.c
View file @ da1677b0
......@@ -73,6 +73,33 @@
#include <asm/cachectl.h>
#include <asm/setup.h>
/* Instruction cache related Auxiliary registers */
#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_IC_PTAG 0x1E
#endif
/* Bit val in IC_CTRL */
#define IC_CTRL_CACHE_DISABLE 0x1
/* Data cache related Auxiliary registers */
#define ARC_REG_DC_BCR 0x72 /* Build Config reg */
#define ARC_REG_DC_IVDC 0x47
#define ARC_REG_DC_CTRL 0x48
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_DC_PTAG 0x5C
#endif
/* Bit val in DC_CTRL */
#define DC_CTRL_INV_MODE_FLUSH 0x40
#define DC_CTRL_FLUSH_STATUS 0x100
char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
{
int n = 0;
......@@ -104,9 +131,15 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
*/
void __cpuinit read_decode_cache_bcr(void)
{
struct bcr_cache ibcr, dbcr;
struct cpuinfo_arc_cache *p_ic, *p_dc;
unsigned int cpu = smp_processor_id();
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
} ibcr, dbcr;
p_ic = &cpuinfo_arc700[cpu].icache;
READ_BCR(ARC_REG_IC_BCR, ibcr);
......@@ -136,12 +169,10 @@ void __cpuinit read_decode_cache_bcr(void)
*/
void __cpuinit arc_cache_init(void)
{
unsigned int temp;
unsigned int cpu = smp_processor_id();
struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
int way_pg_ratio = way_pg_ratio;
int dcache_does_alias;
unsigned int dcache_does_alias, temp;
char str[256];
printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
......
arch/arc/mm/fault.c
View file @ da1677b0
......@@ -15,6 +15,7 @@
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <asm/pgalloc.h>
#include <asm/mmu.h>
static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
{
......
arch/arc/mm/tlb.c
View file @ da1677b0
......@@ -55,7 +55,7 @@
#include <asm/arcregs.h>
#include <asm/setup.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
#include <asm/mmu.h>
/* Need for ARC MMU v2
*
......@@ -97,6 +97,7 @@
* J-TLB entry got evicted/replaced.
*/
/* A copy of the ASID from the PID reg is kept in asid_cache */
int asid_cache = FIRST_ASID;
......@@ -466,10 +467,25 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
*/
void __cpuinit read_decode_mmu_bcr(void)
{
unsigned int tmp;
struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */
struct bcr_mmu_3 *mmu3; /* encoded MMU3 attr */
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
unsigned int tmp;
struct bcr_mmu_1_2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
#else
unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
#endif
} *mmu2;
struct bcr_mmu_3 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
u_itlb:4, u_dtlb:4;
#else
unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
ways:4, ver:8;
#endif
} *mmu3;
tmp = read_aux_reg(ARC_REG_MMU_BCR);
mmu->ver = (tmp >> 24);
......
arch/arc/mm/tlbex.S
View file @ da1677b0
......@@ -39,7 +39,7 @@
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/tlb.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/arcregs.h>
#include <asm/cache.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7