Merge tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 4.5-rc3.

  All of them, except one, are for IIO drivers, and one is for a speakup
  driver fix caused by some earlier patches, to resolve a reported build
  failure"

* tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: Fix allyesconfig build on mn10300
  iio: dht11: Use boottime
  iio: ade7753: avoid uninitialized data
  iio: pressure: mpl115: fix temperature offset sign
  iio: imu: Fix dependencies for !HAS_IOMEM archs
  staging: iio: Fix dependencies for !HAS_IOMEM archs
  iio: adc: Fix dependencies for !HAS_IOMEM archs
  iio: inkern: fix a NULL dereference on error
  iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
  iio: light: acpi-als: Report data as processed
  iio: dac: mcp4725: set iio name property in sysfs
  iio: add HAS_IOMEM dependency to VF610_ADC
  iio: add IIO_TRIGGER dependency to STK8BA50
  iio: proximity: lidar: correct return value
  iio-light: Use a signed return type for ltr501_match_samp_freq()

drivers/iio/accel/Kconfig

@@ -213,6 +213,7 @@ config STK8312
 config STK8BA50
 	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 	depends on I2C
+	depends on IIO_TRIGGER
 	help
 	  Say yes here to get support for the Sensortek STK8BA50 3-axis
 	  accelerometer.

drivers/iio/adc/Kconfig

@@ -175,6 +175,7 @@ config DA9150_GPADC
 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
+	depends on HAS_IOMEM
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series
 	  of SoCs for drivers such as the touchscreen and hwmon to use to share
@@ -207,6 +208,7 @@ config INA2XX_ADC
 config IMX7D_ADC
 	tristate "IMX7D ADC driver"
 	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Say yes here to build support for IMX7D ADC.
 
@@ -409,6 +411,7 @@ config TWL6030_GPADC
 config VF610_ADC
 	tristate "Freescale vf610 ADC driver"
 	depends on OF
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help

drivers/iio/adc/ti_am335x_adc.c

@@ -289,7 +289,7 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
 		goto error_kfifo_free;
 
 	indio_dev->setup_ops = setup_ops;
-	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+	indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
 
 	return 0;
 

drivers/iio/dac/mcp4725.c

@@ -300,6 +300,7 @@ static int mcp4725_probe(struct i2c_client *client,
 	data->client = client;
 
 	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = id->name;
 	indio_dev->info = &mcp4725_info;
 	indio_dev->channels = &mcp4725_channel;
 	indio_dev->num_channels = 1;

drivers/iio/humidity/dht11.c

@@ -117,7 +117,7 @@ static int dht11_decode(struct dht11 *dht11, int offset, int timeres)
 	if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum)
 		return -EIO;
 
-	dht11->timestamp = ktime_get_real_ns();
+	dht11->timestamp = ktime_get_boot_ns();
 	if (hum_int < 20) {  /* DHT22 */
 		dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) *
 					((temp_int & 0x80) ? -100 : 100);
@@ -145,7 +145,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
 
 	/* TODO: Consider making the handler safe for IRQ sharing */
 	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
-		dht11->edges[dht11->num_edges].ts = ktime_get_real_ns();
+		dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
 		dht11->edges[dht11->num_edges++].value =
 						gpio_get_value(dht11->gpio);
 
@@ -164,7 +164,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 	int ret, timeres;
 
 	mutex_lock(&dht11->lock);
-	if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_real_ns()) {
+	if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) {
 		timeres = ktime_get_resolution_ns();
 		if (DHT11_DATA_BIT_HIGH < 2 * timeres) {
 			dev_err(dht11->dev, "timeresolution %dns too low\n",
@@ -279,7 +279,7 @@ static int dht11_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	dht11->timestamp = ktime_get_real_ns() - DHT11_DATA_VALID_TIME - 1;
+	dht11->timestamp = ktime_get_boot_ns() - DHT11_DATA_VALID_TIME - 1;
 	dht11->num_edges = -1;
 
 	platform_set_drvdata(pdev, iio);

drivers/iio/imu/inv_mpu6050/Kconfig

@@ -5,9 +5,9 @@
 config INV_MPU6050_IIO
 	tristate "Invensense MPU6050 devices"
 	depends on I2C && SYSFS
+	depends on I2C_MUX
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
-	select I2C_MUX
 	help
 	  This driver supports the Invensense MPU6050 devices.
 	  This driver can also support MPU6500 in MPU6050 compatibility mode

drivers/iio/inkern.c

@@ -349,6 +349,8 @@ EXPORT_SYMBOL_GPL(iio_channel_get);
 
 void iio_channel_release(struct iio_channel *channel)
 {
+	if (!channel)
+		return;
 	iio_device_put(channel->indio_dev);
 	kfree(channel);
 }

drivers/iio/light/acpi-als.c

@@ -54,7 +54,9 @@ static const struct iio_chan_spec acpi_als_channels[] = {
 			.realbits	= 32,
 			.storagebits	= 32,
 		},
-		.info_mask_separate	= BIT(IIO_CHAN_INFO_RAW),
+		/* _RAW is here for backward ABI compatibility */
+		.info_mask_separate	= BIT(IIO_CHAN_INFO_RAW) |
+					  BIT(IIO_CHAN_INFO_PROCESSED),
 	},
 };
 
@@ -152,7 +154,7 @@ static int acpi_als_read_raw(struct iio_dev *indio_dev,
 	s32 temp_val;
 	int ret;
 
-	if (mask != IIO_CHAN_INFO_RAW)
+	if ((mask != IIO_CHAN_INFO_PROCESSED) && (mask != IIO_CHAN_INFO_RAW))
 		return -EINVAL;
 
 	/* we support only illumination (_ALI) so far. */

drivers/iio/light/ltr501.c

@@ -180,7 +180,7 @@ static const struct ltr501_samp_table ltr501_ps_samp_table[] = {
 			{500000, 2000000}
 };
 
-static unsigned int ltr501_match_samp_freq(const struct ltr501_samp_table *tab,
+static int ltr501_match_samp_freq(const struct ltr501_samp_table *tab,
 					   int len, int val, int val2)
 {
 	int i, freq;

drivers/iio/pressure/mpl115.c

@@ -117,7 +117,7 @@ static int mpl115_read_raw(struct iio_dev *indio_dev,
 		*val = ret >> 6;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = 605;
+		*val = -605;
 		*val2 = 750000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SCALE:

drivers/iio/proximity/pulsedlight-lidar-lite-v2.c

@@ -87,7 +87,7 @@ static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
 
 	ret = i2c_transfer(client->adapter, msg, 2);
 
-	return (ret == 2) ? 0 : ret;
+	return (ret == 2) ? 0 : -EIO;
 }
 
 static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)

drivers/staging/iio/adc/Kconfig

@@ -6,6 +6,7 @@ menu "Analog to digital converters"
 config AD7606
 	tristate "Analog Devices AD7606 ADC driver"
 	depends on GPIOLIB || COMPILE_TEST
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help

drivers/staging/iio/meter/ade7753.c

@@ -217,8 +217,12 @@ static ssize_t ade7753_write_16bit(struct device *dev,
 static int ade7753_reset(struct device *dev)
 {
 	u16 val;
+	int ret;
+
+	ret = ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val);
+	if (ret)
+		return ret;
 
-	ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val);
 	val |= BIT(6); /* Software Chip Reset */
 
 	return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val);
@@ -343,8 +347,12 @@ static int ade7753_set_irq(struct device *dev, bool enable)
 static int ade7753_stop_device(struct device *dev)
 {
 	u16 val;
+	int ret;
+
+	ret = ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val);
+	if (ret)
+		return ret;
 
-	ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val);
 	val |= BIT(4);  /* AD converters can be turned off */
 
 	return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val);

drivers/staging/speakup/Kconfig

 menu "Speakup console speech"
 
 config SPEAKUP
-	depends on VT
+	depends on VT && !MN10300
 	tristate "Speakup core"
 	---help---
 		This is the Speakup screen reader.  Think of it as a