Commit dae52204 authored by Baruch Siach's avatar Baruch Siach Committed by Gregory CLEMENT

Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"

This reverts commit 8ed46368.

This commit breaks boot on Armada 8K based systems. Reverting it makes
affected systems boot again.
Reported-by: default avatarSergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: default avatarBaruch Siach <baruch@tkos.co.il>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@bootlin.com>
parent 65102238
...@@ -20,28 +20,24 @@ cpu0: cpu@0 { ...@@ -20,28 +20,24 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a72", "arm,armv8"; compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>; reg = <0x000>;
enable-method = "psci"; enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
}; };
cpu1: cpu@1 { cpu1: cpu@1 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8"; compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>; reg = <0x001>;
enable-method = "psci"; enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
}; };
cpu2: cpu@100 { cpu2: cpu@100 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8"; compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>; reg = <0x100>;
enable-method = "psci"; enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
}; };
cpu3: cpu@101 { cpu3: cpu@101 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8"; compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>; reg = <0x101>;
enable-method = "psci"; enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
}; };
}; };
}; };
...@@ -28,33 +28,6 @@ psci { ...@@ -28,33 +28,6 @@ psci {
method = "smc"; method = "smc";
}; };
cpus {
#address-cells = <1>;
#size-cells = <0>;
idle_states {
entry_method = "arm,pcsi";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
entry-latency-us = <80>;
exit-latency-us = <160>;
min-residency-us = <320>;
};
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <500>;
exit-latency-us = <1000>;
min-residency-us = <2500>;
};
};
};
ap806 { ap806 {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment