Commit dbeb714a authored by David S. Miller's avatar David S. Miller

Merge branch 'liquidio-CN23XX-part-1'

Raghu Vatsavayi says:

====================
liquidio CN23XX support

Following patchset adds support for new device "CN23XX" in
liquidio family of adapters. As adviced by you I have split
the previous V3 patch of 18 patches into two halves. This
first patchset has first 10 patches, which are tested against
net-next. I will post the second half after this one.

This V4 patch also addressed all the comments from previous
submission:
1) Avoid busy loop while reading registers.
2) Other minor comments about debug messages and constants.

Please apply patches in following order as some of the
patches depend on earlier patches.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 650097cd c0eab5b3
......@@ -58,7 +58,7 @@ config LIQUIDIO
select LIBCRC32C
---help---
This driver supports Cavium LiquidIO Intelligent Server Adapters
based on CN66XX and CN68XX chips.
based on CN66XX, CN68XX and CN23XX chips.
To compile this driver as a module, choose M here: the module
will be called liquidio. This is recommended.
......
......@@ -3,14 +3,16 @@
#
obj-$(CONFIG_LIQUIDIO) += liquidio.o
liquidio-objs := lio_main.o \
lio_ethtool.o \
liquidio-$(CONFIG_LIQUIDIO) += lio_ethtool.o \
lio_core.o \
request_manager.o \
response_manager.o \
octeon_device.o \
cn66xx_device.o \
cn68xx_device.o \
cn23xx_pf_device.o \
octeon_mem_ops.o \
octeon_droq.o \
octeon_console.o \
octeon_nic.o
liquidio-objs := lio_main.o octeon_console.o $(liquidio-y)
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2015 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include "liquidio_common.h"
#include "octeon_droq.h"
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
#include "cn23xx_pf_device.h"
#include "octeon_main.h"
#define RESET_NOTDONE 0
#define RESET_DONE 1
/* Change the value of SLI Packet Input Jabber Register to allow
* VXLAN TSO packets which can be 64424 bytes, exceeding the
* MAX_GSO_SIZE we supplied to the kernel
*/
#define CN23XX_INPUT_JABBER 64600
#define LIOLUT_RING_DISTRIBUTION 9
const int liolut_num_vfs_to_rings_per_vf[LIOLUT_RING_DISTRIBUTION] = {
0, 8, 4, 2, 2, 2, 1, 1, 1
};
void cn23xx_dump_pf_initialized_regs(struct octeon_device *oct)
{
int i = 0;
u32 regval = 0;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
/*In cn23xx_soft_reset*/
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%llx\n",
"CN23XX_WIN_WR_MASK_REG", CVM_CAST64(CN23XX_WIN_WR_MASK_REG),
CVM_CAST64(octeon_read_csr64(oct, CN23XX_WIN_WR_MASK_REG)));
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_SLI_SCRATCH1", CVM_CAST64(CN23XX_SLI_SCRATCH1),
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1)));
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_RST_SOFT_RST", CN23XX_RST_SOFT_RST,
lio_pci_readq(oct, CN23XX_RST_SOFT_RST));
/*In cn23xx_set_dpi_regs*/
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_DPI_DMA_CONTROL", CN23XX_DPI_DMA_CONTROL,
lio_pci_readq(oct, CN23XX_DPI_DMA_CONTROL));
for (i = 0; i < 6; i++) {
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_DPI_DMA_ENG_ENB", i,
CN23XX_DPI_DMA_ENG_ENB(i),
lio_pci_readq(oct, CN23XX_DPI_DMA_ENG_ENB(i)));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_DPI_DMA_ENG_BUF", i,
CN23XX_DPI_DMA_ENG_BUF(i),
lio_pci_readq(oct, CN23XX_DPI_DMA_ENG_BUF(i)));
}
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", "CN23XX_DPI_CTL",
CN23XX_DPI_CTL, lio_pci_readq(oct, CN23XX_DPI_CTL));
/*In cn23xx_setup_pcie_mps and cn23xx_setup_pcie_mrrs */
pci_read_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, &regval);
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_CONFIG_PCIE_DEVCTL",
CVM_CAST64(CN23XX_CONFIG_PCIE_DEVCTL), CVM_CAST64(regval));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_DPI_SLI_PRTX_CFG", oct->pcie_port,
CN23XX_DPI_SLI_PRTX_CFG(oct->pcie_port),
lio_pci_readq(oct, CN23XX_DPI_SLI_PRTX_CFG(oct->pcie_port)));
/*In cn23xx_specific_regs_setup */
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_S2M_PORTX_CTL", oct->pcie_port,
CVM_CAST64(CN23XX_SLI_S2M_PORTX_CTL(oct->pcie_port)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_S2M_PORTX_CTL(oct->pcie_port))));
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_SLI_RING_RST", CVM_CAST64(CN23XX_SLI_PKT_IOQ_RING_RST),
(u64)octeon_read_csr64(oct, CN23XX_SLI_PKT_IOQ_RING_RST));
/*In cn23xx_setup_global_mac_regs*/
for (i = 0; i < CN23XX_MAX_MACS; i++) {
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_PKT_MAC_RINFO64", i,
CVM_CAST64(CN23XX_SLI_PKT_MAC_RINFO64(i, oct->pf_num)),
CVM_CAST64(octeon_read_csr64
(oct, CN23XX_SLI_PKT_MAC_RINFO64
(i, oct->pf_num))));
}
/*In cn23xx_setup_global_input_regs*/
for (i = 0; i < CN23XX_MAX_INPUT_QUEUES; i++) {
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_IQ_PKT_CONTROL64", i,
CVM_CAST64(CN23XX_SLI_IQ_PKT_CONTROL64(i)),
CVM_CAST64(octeon_read_csr64
(oct, CN23XX_SLI_IQ_PKT_CONTROL64(i))));
}
/*In cn23xx_setup_global_output_regs*/
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_WMARK", CVM_CAST64(CN23XX_SLI_OQ_WMARK),
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_OQ_WMARK)));
for (i = 0; i < CN23XX_MAX_OUTPUT_QUEUES; i++) {
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_PKT_CONTROL", i,
CVM_CAST64(CN23XX_SLI_OQ_PKT_CONTROL(i)),
CVM_CAST64(octeon_read_csr(
oct, CN23XX_SLI_OQ_PKT_CONTROL(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_PKT_INT_LEVELS", i,
CVM_CAST64(CN23XX_SLI_OQ_PKT_INT_LEVELS(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(i))));
}
/*In cn23xx_enable_interrupt and cn23xx_disable_interrupt*/
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"cn23xx->intr_enb_reg64",
CVM_CAST64((long)(cn23xx->intr_enb_reg64)),
CVM_CAST64(readq(cn23xx->intr_enb_reg64)));
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"cn23xx->intr_sum_reg64",
CVM_CAST64((long)(cn23xx->intr_sum_reg64)),
CVM_CAST64(readq(cn23xx->intr_sum_reg64)));
/*In cn23xx_setup_iq_regs*/
for (i = 0; i < CN23XX_MAX_INPUT_QUEUES; i++) {
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_IQ_BASE_ADDR64", i,
CVM_CAST64(CN23XX_SLI_IQ_BASE_ADDR64(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_IQ_BASE_ADDR64(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_IQ_SIZE", i,
CVM_CAST64(CN23XX_SLI_IQ_SIZE(i)),
CVM_CAST64(octeon_read_csr
(oct, CN23XX_SLI_IQ_SIZE(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_IQ_DOORBELL", i,
CVM_CAST64(CN23XX_SLI_IQ_DOORBELL(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_IQ_DOORBELL(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_IQ_INSTR_COUNT64", i,
CVM_CAST64(CN23XX_SLI_IQ_INSTR_COUNT64(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_IQ_INSTR_COUNT64(i))));
}
/*In cn23xx_setup_oq_regs*/
for (i = 0; i < CN23XX_MAX_OUTPUT_QUEUES; i++) {
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_BASE_ADDR64", i,
CVM_CAST64(CN23XX_SLI_OQ_BASE_ADDR64(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_OQ_BASE_ADDR64(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_SIZE", i,
CVM_CAST64(CN23XX_SLI_OQ_SIZE(i)),
CVM_CAST64(octeon_read_csr
(oct, CN23XX_SLI_OQ_SIZE(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_BUFF_INFO_SIZE", i,
CVM_CAST64(CN23XX_SLI_OQ_BUFF_INFO_SIZE(i)),
CVM_CAST64(octeon_read_csr(
oct, CN23XX_SLI_OQ_BUFF_INFO_SIZE(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_PKTS_SENT", i,
CVM_CAST64(CN23XX_SLI_OQ_PKTS_SENT(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_OQ_PKTS_SENT(i))));
dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n",
"CN23XX_SLI_OQ_PKTS_CREDIT", i,
CVM_CAST64(CN23XX_SLI_OQ_PKTS_CREDIT(i)),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_OQ_PKTS_CREDIT(i))));
}
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_SLI_PKT_TIME_INT",
CVM_CAST64(CN23XX_SLI_PKT_TIME_INT),
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_PKT_TIME_INT)));
dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n",
"CN23XX_SLI_PKT_CNT_INT",
CVM_CAST64(CN23XX_SLI_PKT_CNT_INT),
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_PKT_CNT_INT)));
}
static int cn23xx_pf_soft_reset(struct octeon_device *oct)
{
octeon_write_csr64(oct, CN23XX_WIN_WR_MASK_REG, 0xFF);
dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: BIST enabled for CN23XX soft reset\n",
oct->octeon_id);
octeon_write_csr64(oct, CN23XX_SLI_SCRATCH1, 0x1234ULL);
/* Initiate chip-wide soft reset */
lio_pci_readq(oct, CN23XX_RST_SOFT_RST);
lio_pci_writeq(oct, 1, CN23XX_RST_SOFT_RST);
/* Wait for 100ms as Octeon resets. */
mdelay(100);
if (octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1) == 0x1234ULL) {
dev_err(&oct->pci_dev->dev, "OCTEON[%d]: Soft reset failed\n",
oct->octeon_id);
return 1;
}
dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: Reset completed\n",
oct->octeon_id);
/* restore the reset value*/
octeon_write_csr64(oct, CN23XX_WIN_WR_MASK_REG, 0xFF);
return 0;
}
static void cn23xx_enable_error_reporting(struct octeon_device *oct)
{
u32 regval;
u32 uncorrectable_err_mask, corrtable_err_status;
pci_read_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, &regval);
if (regval & CN23XX_CONFIG_PCIE_DEVCTL_MASK) {
uncorrectable_err_mask = 0;
corrtable_err_status = 0;
pci_read_config_dword(oct->pci_dev,
CN23XX_CONFIG_PCIE_UNCORRECT_ERR_MASK,
&uncorrectable_err_mask);
pci_read_config_dword(oct->pci_dev,
CN23XX_CONFIG_PCIE_CORRECT_ERR_STATUS,
&corrtable_err_status);
dev_err(&oct->pci_dev->dev, "PCI-E Fatal error detected;\n"
"\tdev_ctl_status_reg = 0x%08x\n"
"\tuncorrectable_error_mask_reg = 0x%08x\n"
"\tcorrectable_error_status_reg = 0x%08x\n",
regval, uncorrectable_err_mask,
corrtable_err_status);
}
regval |= 0xf; /* Enable Link error reporting */
dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: Enabling PCI-E error reporting..\n",
oct->octeon_id);
pci_write_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, regval);
}
static u32 cn23xx_coprocessor_clock(struct octeon_device *oct)
{
/* Bits 29:24 of RST_BOOT[PNR_MUL] holds the ref.clock MULTIPLIER
* for SLI.
*/
/* TBD: get the info in Hand-shake */
return (((lio_pci_readq(oct, CN23XX_RST_BOOT) >> 24) & 0x3f) * 50);
}
u32 cn23xx_pf_get_oq_ticks(struct octeon_device *oct, u32 time_intr_in_us)
{
/* This gives the SLI clock per microsec */
u32 oqticks_per_us = cn23xx_coprocessor_clock(oct);
oct->pfvf_hsword.coproc_tics_per_us = oqticks_per_us;
/* This gives the clock cycles per millisecond */
oqticks_per_us *= 1000;
/* This gives the oq ticks (1024 core clock cycles) per millisecond */
oqticks_per_us /= 1024;
/* time_intr is in microseconds. The next 2 steps gives the oq ticks
* corressponding to time_intr.
*/
oqticks_per_us *= time_intr_in_us;
oqticks_per_us /= 1000;
return oqticks_per_us;
}
static void cn23xx_setup_global_mac_regs(struct octeon_device *oct)
{
u64 reg_val;
u16 mac_no = oct->pcie_port;
u16 pf_num = oct->pf_num;
/* programming SRN and TRS for each MAC(0..3) */
dev_dbg(&oct->pci_dev->dev, "%s:Using pcie port %d\n",
__func__, mac_no);
/* By default, mapping all 64 IOQs to a single MACs */
reg_val =
octeon_read_csr64(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num));
if (oct->rev_id == OCTEON_CN23XX_REV_1_1) {
/* setting SRN <6:0> */
reg_val = pf_num * CN23XX_MAX_RINGS_PER_PF_PASS_1_1;
} else {
/* setting SRN <6:0> */
reg_val = pf_num * CN23XX_MAX_RINGS_PER_PF;
}
/* setting TRS <23:16> */
reg_val = reg_val |
(oct->sriov_info.trs << CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS);
/* write these settings to MAC register */
octeon_write_csr64(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num),
reg_val);
dev_dbg(&oct->pci_dev->dev, "SLI_PKT_MAC(%d)_PF(%d)_RINFO : 0x%016llx\n",
mac_no, pf_num, (u64)octeon_read_csr64
(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num)));
}
static int cn23xx_reset_io_queues(struct octeon_device *oct)
{
int ret_val = 0;
u64 d64;
u32 q_no, srn, ern;
u32 loop = 1000;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->sriov_info.num_pf_rings;
/*As per HRM reg description, s/w cant write 0 to ENB. */
/*to make the queue off, need to set the RST bit. */
/* Reset the Enable bit for all the 64 IQs. */
for (q_no = srn; q_no < ern; q_no++) {
/* set RST bit to 1. This bit applies to both IQ and OQ */
d64 = octeon_read_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
d64 = d64 | CN23XX_PKT_INPUT_CTL_RST;
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), d64);
}
/*wait until the RST bit is clear or the RST and quite bits are set*/
for (q_no = srn; q_no < ern; q_no++) {
u64 reg_val = octeon_read_csr64(oct,
CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
while ((READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_RST) &&
!(READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_QUIET) &&
loop--) {
WRITE_ONCE(reg_val, octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)));
}
if (!loop) {
dev_err(&oct->pci_dev->dev,
"clearing the reset reg failed or setting the quiet reg failed for qno: %u\n",
q_no);
return -1;
}
WRITE_ONCE(reg_val, READ_ONCE(reg_val) &
~CN23XX_PKT_INPUT_CTL_RST);
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
READ_ONCE(reg_val));
WRITE_ONCE(reg_val, octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)));
if (READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_RST) {
dev_err(&oct->pci_dev->dev,
"clearing the reset failed for qno: %u\n",
q_no);
ret_val = -1;
}
}
return ret_val;
}
static int cn23xx_pf_setup_global_input_regs(struct octeon_device *oct)
{
u32 q_no, ern, srn;
u64 pf_num;
u64 intr_threshold, reg_val;
struct octeon_instr_queue *iq;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
pf_num = oct->pf_num;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->sriov_info.num_pf_rings;
if (cn23xx_reset_io_queues(oct))
return -1;
/** Set the MAC_NUM and PVF_NUM in IQ_PKT_CONTROL reg
* for all queues.Only PF can set these bits.
* bits 29:30 indicate the MAC num.
* bits 32:47 indicate the PVF num.
*/
for (q_no = 0; q_no < ern; q_no++) {
reg_val = oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS;
reg_val |= pf_num << CN23XX_PKT_INPUT_CTL_PF_NUM_POS;
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
reg_val);
}
/* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for
* pf queues
*/
for (q_no = srn; q_no < ern; q_no++) {
void __iomem *inst_cnt_reg;
iq = oct->instr_queue[q_no];
if (iq)
inst_cnt_reg = iq->inst_cnt_reg;
else
inst_cnt_reg = (u8 *)oct->mmio[0].hw_addr +
CN23XX_SLI_IQ_INSTR_COUNT64(q_no);
reg_val =
octeon_read_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
reg_val |= CN23XX_PKT_INPUT_CTL_MASK;
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
reg_val);
/* Set WMARK level for triggering PI_INT */
/* intr_threshold = CN23XX_DEF_IQ_INTR_THRESHOLD & */
intr_threshold = CFG_GET_IQ_INTR_PKT(cn23xx->conf) &
CN23XX_PKT_IN_DONE_WMARK_MASK;
writeq((readq(inst_cnt_reg) &
~(CN23XX_PKT_IN_DONE_WMARK_MASK <<
CN23XX_PKT_IN_DONE_WMARK_BIT_POS)) |
(intr_threshold << CN23XX_PKT_IN_DONE_WMARK_BIT_POS),
inst_cnt_reg);
}
return 0;
}
static void cn23xx_pf_setup_global_output_regs(struct octeon_device *oct)
{
u32 reg_val;
u32 q_no, ern, srn;
u64 time_threshold;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->sriov_info.num_pf_rings;
if (CFG_GET_IS_SLI_BP_ON(cn23xx->conf)) {
octeon_write_csr64(oct, CN23XX_SLI_OQ_WMARK, 32);
} else {
/** Set Output queue watermark to 0 to disable backpressure */
octeon_write_csr64(oct, CN23XX_SLI_OQ_WMARK, 0);
}
for (q_no = srn; q_no < ern; q_no++) {
reg_val = octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no));
/* set IPTR & DPTR */
reg_val |=
(CN23XX_PKT_OUTPUT_CTL_IPTR | CN23XX_PKT_OUTPUT_CTL_DPTR);
/* reset BMODE */
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_BMODE);
/* No Relaxed Ordering, No Snoop, 64-bit Byte swap
* for Output Queue ScatterList
* reset ROR_P, NSR_P
*/
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ROR_P);
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_NSR_P);
#ifdef __LITTLE_ENDIAN_BITFIELD
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ES_P);
#else
reg_val |= (CN23XX_PKT_OUTPUT_CTL_ES_P);
#endif
/* No Relaxed Ordering, No Snoop, 64-bit Byte swap
* for Output Queue Data
* reset ROR, NSR
*/
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ROR);
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_NSR);
/* set the ES bit */
reg_val |= (CN23XX_PKT_OUTPUT_CTL_ES);
/* write all the selected settings */
octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no), reg_val);
/* Enabling these interrupt in oct->fn_list.enable_interrupt()
* routine which called after IOQ init.
* Set up interrupt packet and time thresholds
* for all the OQs
*/
time_threshold = cn23xx_pf_get_oq_ticks(
oct, (u32)CFG_GET_OQ_INTR_TIME(cn23xx->conf));
octeon_write_csr64(oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(q_no),
(CFG_GET_OQ_INTR_PKT(cn23xx->conf) |
(time_threshold << 32)));
}
/** Setting the water mark level for pko back pressure **/
writeq(0x40, (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_WMARK);
/** Disabling setting OQs in reset when ring has no dorebells
* enabling this will cause of head of line blocking
*/
/* Do it only for pass1.1. and pass1.2 */
if ((oct->rev_id == OCTEON_CN23XX_REV_1_0) ||
(oct->rev_id == OCTEON_CN23XX_REV_1_1))
writeq(readq((u8 *)oct->mmio[0].hw_addr +
CN23XX_SLI_GBL_CONTROL) | 0x2,
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_GBL_CONTROL);
/** Enable channel-level backpressure */
if (oct->pf_num)
writeq(0xffffffffffffffffULL,
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OUT_BP_EN2_W1S);
else
writeq(0xffffffffffffffffULL,
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OUT_BP_EN_W1S);
}
static int cn23xx_setup_pf_device_regs(struct octeon_device *oct)
{
cn23xx_enable_error_reporting(oct);
/* program the MAC(0..3)_RINFO before setting up input/output regs */
cn23xx_setup_global_mac_regs(oct);
if (cn23xx_pf_setup_global_input_regs(oct))
return -1;
cn23xx_pf_setup_global_output_regs(oct);
/* Default error timeout value should be 0x200000 to avoid host hang
* when reads invalid register
*/
octeon_write_csr64(oct, CN23XX_SLI_WINDOW_CTL,
CN23XX_SLI_WINDOW_CTL_DEFAULT);
/* set SLI_PKT_IN_JABBER to handle large VXLAN packets */
octeon_write_csr64(oct, CN23XX_SLI_PKT_IN_JABBER, CN23XX_INPUT_JABBER);
return 0;
}
static void cn23xx_setup_iq_regs(struct octeon_device *oct, u32 iq_no)
{
struct octeon_instr_queue *iq = oct->instr_queue[iq_no];
u64 pkt_in_done;
iq_no += oct->sriov_info.pf_srn;
/* Write the start of the input queue's ring and its size */
octeon_write_csr64(oct, CN23XX_SLI_IQ_BASE_ADDR64(iq_no),
iq->base_addr_dma);
octeon_write_csr(oct, CN23XX_SLI_IQ_SIZE(iq_no), iq->max_count);
/* Remember the doorbell & instruction count register addr
* for this queue
*/
iq->doorbell_reg =
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_IQ_DOORBELL(iq_no);
iq->inst_cnt_reg =
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_IQ_INSTR_COUNT64(iq_no);
dev_dbg(&oct->pci_dev->dev, "InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p\n",
iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
/* Store the current instruction counter (used in flush_iq
* calculation)
*/
pkt_in_done = readq(iq->inst_cnt_reg);
if (oct->msix_on) {
/* Set CINT_ENB to enable IQ interrupt */
writeq((pkt_in_done | CN23XX_INTR_CINT_ENB),
iq->inst_cnt_reg);
} else {
/* Clear the count by writing back what we read, but don't
* enable interrupts
*/
writeq(pkt_in_done, iq->inst_cnt_reg);
}
iq->reset_instr_cnt = 0;
}
static void cn23xx_setup_oq_regs(struct octeon_device *oct, u32 oq_no)
{
u32 reg_val;
struct octeon_droq *droq = oct->droq[oq_no];
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
u64 time_threshold;
u64 cnt_threshold;
oq_no += oct->sriov_info.pf_srn;
octeon_write_csr64(oct, CN23XX_SLI_OQ_BASE_ADDR64(oq_no),
droq->desc_ring_dma);
octeon_write_csr(oct, CN23XX_SLI_OQ_SIZE(oq_no), droq->max_count);
octeon_write_csr(oct, CN23XX_SLI_OQ_BUFF_INFO_SIZE(oq_no),
(droq->buffer_size | (OCT_RH_SIZE << 16)));
/* Get the mapped address of the pkt_sent and pkts_credit regs */
droq->pkts_sent_reg =
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_PKTS_SENT(oq_no);
droq->pkts_credit_reg =
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_PKTS_CREDIT(oq_no);
if (!oct->msix_on) {
/* Enable this output queue to generate Packet Timer Interrupt
*/
reg_val =
octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no));
reg_val |= CN23XX_PKT_OUTPUT_CTL_TENB;
octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no),
reg_val);
/* Enable this output queue to generate Packet Count Interrupt
*/
reg_val =
octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no));
reg_val |= CN23XX_PKT_OUTPUT_CTL_CENB;
octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no),
reg_val);
} else {
time_threshold = cn23xx_pf_get_oq_ticks(
oct, (u32)CFG_GET_OQ_INTR_TIME(cn23xx->conf));
cnt_threshold = (u32)CFG_GET_OQ_INTR_PKT(cn23xx->conf);
octeon_write_csr64(
oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(oq_no),
((time_threshold << 32 | cnt_threshold)));
}
}
static int cn23xx_enable_io_queues(struct octeon_device *oct)
{
u64 reg_val;
u32 srn, ern, q_no;
u32 loop = 1000;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->num_iqs;
for (q_no = srn; q_no < ern; q_no++) {
/* set the corresponding IQ IS_64B bit */
if (oct->io_qmask.iq64B & BIT_ULL(q_no - srn)) {
reg_val = octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
reg_val = reg_val | CN23XX_PKT_INPUT_CTL_IS_64B;
octeon_write_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), reg_val);
}
/* set the corresponding IQ ENB bit */
if (oct->io_qmask.iq & BIT_ULL(q_no - srn)) {
/* IOQs are in reset by default in PEM2 mode,
* clearing reset bit
*/
reg_val = octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
if (reg_val & CN23XX_PKT_INPUT_CTL_RST) {
while ((reg_val & CN23XX_PKT_INPUT_CTL_RST) &&
!(reg_val &
CN23XX_PKT_INPUT_CTL_QUIET) &&
loop--) {
reg_val = octeon_read_csr64(
oct,
CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
}
if (!loop) {
dev_err(&oct->pci_dev->dev,
"clearing the reset reg failed or setting the quiet reg failed for qno: %u\n",
q_no);
return -1;
}
reg_val = reg_val & ~CN23XX_PKT_INPUT_CTL_RST;
octeon_write_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
reg_val);
reg_val = octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
if (reg_val & CN23XX_PKT_INPUT_CTL_RST) {
dev_err(&oct->pci_dev->dev,
"clearing the reset failed for qno: %u\n",
q_no);
return -1;
}
}
reg_val = octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
reg_val = reg_val | CN23XX_PKT_INPUT_CTL_RING_ENB;
octeon_write_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), reg_val);
}
}
for (q_no = srn; q_no < ern; q_no++) {
u32 reg_val;
/* set the corresponding OQ ENB bit */
if (oct->io_qmask.oq & BIT_ULL(q_no - srn)) {
reg_val = octeon_read_csr(
oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no));
reg_val = reg_val | CN23XX_PKT_OUTPUT_CTL_RING_ENB;
octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no),
reg_val);
}
}
return 0;
}
static void cn23xx_disable_io_queues(struct octeon_device *oct)
{
int q_no, loop;
u64 d64;
u32 d32;
u32 srn, ern;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->num_iqs;
/*** Disable Input Queues. ***/
for (q_no = srn; q_no < ern; q_no++) {
loop = HZ;
/* start the Reset for a particular ring */
WRITE_ONCE(d64, octeon_read_csr64(
oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)));
WRITE_ONCE(d64, READ_ONCE(d64) &
(~(CN23XX_PKT_INPUT_CTL_RING_ENB)));
WRITE_ONCE(d64, READ_ONCE(d64) | CN23XX_PKT_INPUT_CTL_RST);
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
READ_ONCE(d64));
/* Wait until hardware indicates that the particular IQ
* is out of reset.
*/
WRITE_ONCE(d64, octeon_read_csr64(
oct, CN23XX_SLI_PKT_IOQ_RING_RST));
while (!(READ_ONCE(d64) & BIT_ULL(q_no)) && loop--) {
WRITE_ONCE(d64, octeon_read_csr64(
oct, CN23XX_SLI_PKT_IOQ_RING_RST));
schedule_timeout_uninterruptible(1);
}
/* Reset the doorbell register for this Input Queue. */
octeon_write_csr(oct, CN23XX_SLI_IQ_DOORBELL(q_no), 0xFFFFFFFF);
while (octeon_read_csr64(oct, CN23XX_SLI_IQ_DOORBELL(q_no)) &&
loop--) {
schedule_timeout_uninterruptible(1);
}
}
/*** Disable Output Queues. ***/
for (q_no = srn; q_no < ern; q_no++) {
loop = HZ;
/* Wait until hardware indicates that the particular IQ
* is out of reset.It given that SLI_PKT_RING_RST is
* common for both IQs and OQs
*/
WRITE_ONCE(d64, octeon_read_csr64(
oct, CN23XX_SLI_PKT_IOQ_RING_RST));
while (!(READ_ONCE(d64) & BIT_ULL(q_no)) && loop--) {
WRITE_ONCE(d64, octeon_read_csr64(
oct, CN23XX_SLI_PKT_IOQ_RING_RST));
schedule_timeout_uninterruptible(1);
}
/* Reset the doorbell register for this Output Queue. */
octeon_write_csr(oct, CN23XX_SLI_OQ_PKTS_CREDIT(q_no),
0xFFFFFFFF);
while (octeon_read_csr64(oct,
CN23XX_SLI_OQ_PKTS_CREDIT(q_no)) &&
loop--) {
schedule_timeout_uninterruptible(1);
}
/* clear the SLI_PKT(0..63)_CNTS[CNT] reg value */
WRITE_ONCE(d32, octeon_read_csr(
oct, CN23XX_SLI_OQ_PKTS_SENT(q_no)));
octeon_write_csr(oct, CN23XX_SLI_OQ_PKTS_SENT(q_no),
READ_ONCE(d32));
}
}
static u64 cn23xx_pf_msix_interrupt_handler(void *dev)
{
struct octeon_ioq_vector *ioq_vector = (struct octeon_ioq_vector *)dev;
struct octeon_device *oct = ioq_vector->oct_dev;
u64 pkts_sent;
u64 ret = 0;
struct octeon_droq *droq = oct->droq[ioq_vector->droq_index];
dev_dbg(&oct->pci_dev->dev, "In %s octeon_dev @ %p\n", __func__, oct);
if (!droq) {
dev_err(&oct->pci_dev->dev, "23XX bringup FIXME: oct pfnum:%d ioq_vector->ioq_num :%d droq is NULL\n",
oct->pf_num, ioq_vector->ioq_num);
return 0;
}
pkts_sent = readq(droq->pkts_sent_reg);
/* If our device has interrupted, then proceed. Also check
* for all f's if interrupt was triggered on an error
* and the PCI read fails.
*/
if (!pkts_sent || (pkts_sent == 0xFFFFFFFFFFFFFFFFULL))
return ret;
/* Write count reg in sli_pkt_cnts to clear these int.*/
if ((pkts_sent & CN23XX_INTR_PO_INT) ||
(pkts_sent & CN23XX_INTR_PI_INT)) {
if (pkts_sent & CN23XX_INTR_PO_INT)
ret |= MSIX_PO_INT;
}
if (pkts_sent & CN23XX_INTR_PI_INT)
/* We will clear the count when we update the read_index. */
ret |= MSIX_PI_INT;
/* Never need to handle msix mbox intr for pf. They arrive on the last
* msix
*/
return ret;
}
static irqreturn_t cn23xx_interrupt_handler(void *dev)
{
struct octeon_device *oct = (struct octeon_device *)dev;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
u64 intr64;
dev_dbg(&oct->pci_dev->dev, "In %s octeon_dev @ %p\n", __func__, oct);
intr64 = readq(cn23xx->intr_sum_reg64);
oct->int_status = 0;
if (intr64 & CN23XX_INTR_ERR)
dev_err(&oct->pci_dev->dev, "OCTEON[%d]: Error Intr: 0x%016llx\n",
oct->octeon_id, CVM_CAST64(intr64));
if (oct->msix_on != LIO_FLAG_MSIX_ENABLED) {
if (intr64 & CN23XX_INTR_PKT_DATA)
oct->int_status |= OCT_DEV_INTR_PKT_DATA;
}
if (intr64 & (CN23XX_INTR_DMA0_FORCE))
oct->int_status |= OCT_DEV_INTR_DMA0_FORCE;
if (intr64 & (CN23XX_INTR_DMA1_FORCE))
oct->int_status |= OCT_DEV_INTR_DMA1_FORCE;
/* Clear the current interrupts */
writeq(intr64, cn23xx->intr_sum_reg64);
return IRQ_HANDLED;
}
static void cn23xx_enable_pf_interrupt(struct octeon_device *oct, u8 intr_flag)
{
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
u64 intr_val = 0;
/* Divide the single write to multiple writes based on the flag. */
/* Enable Interrupt */
if (intr_flag == OCTEON_ALL_INTR) {
writeq(cn23xx->intr_mask64, cn23xx->intr_enb_reg64);
} else if (intr_flag & OCTEON_OUTPUT_INTR) {
intr_val = readq(cn23xx->intr_enb_reg64);
intr_val |= CN23XX_INTR_PKT_DATA;
writeq(intr_val, cn23xx->intr_enb_reg64);
}
}
static void cn23xx_disable_pf_interrupt(struct octeon_device *oct, u8 intr_flag)
{
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
u64 intr_val = 0;
/* Disable Interrupts */
if (intr_flag == OCTEON_ALL_INTR) {
writeq(0, cn23xx->intr_enb_reg64);
} else if (intr_flag & OCTEON_OUTPUT_INTR) {
intr_val = readq(cn23xx->intr_enb_reg64);
intr_val &= ~CN23XX_INTR_PKT_DATA;
writeq(intr_val, cn23xx->intr_enb_reg64);
}
}
static void cn23xx_get_pcie_qlmport(struct octeon_device *oct)
{
oct->pcie_port = (octeon_read_csr(oct, CN23XX_SLI_MAC_NUMBER)) & 0xff;
dev_dbg(&oct->pci_dev->dev, "OCTEON: CN23xx uses PCIE Port %d\n",
oct->pcie_port);
}
static void cn23xx_get_pf_num(struct octeon_device *oct)
{
u32 fdl_bit = 0;
/** Read Function Dependency Link reg to get the function number */
pci_read_config_dword(oct->pci_dev, CN23XX_PCIE_SRIOV_FDL, &fdl_bit);
oct->pf_num = ((fdl_bit >> CN23XX_PCIE_SRIOV_FDL_BIT_POS) &
CN23XX_PCIE_SRIOV_FDL_MASK);
}
static void cn23xx_setup_reg_address(struct octeon_device *oct)
{
u8 __iomem *bar0_pciaddr = oct->mmio[0].hw_addr;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
oct->reg_list.pci_win_wr_addr_hi =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_ADDR_HI);
oct->reg_list.pci_win_wr_addr_lo =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_ADDR_LO);
oct->reg_list.pci_win_wr_addr =
(u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_ADDR64);
oct->reg_list.pci_win_rd_addr_hi =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_ADDR_HI);
oct->reg_list.pci_win_rd_addr_lo =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_ADDR_LO);
oct->reg_list.pci_win_rd_addr =
(u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_ADDR64);
oct->reg_list.pci_win_wr_data_hi =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_DATA_HI);
oct->reg_list.pci_win_wr_data_lo =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_DATA_LO);
oct->reg_list.pci_win_wr_data =
(u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_DATA64);
oct->reg_list.pci_win_rd_data_hi =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_DATA_HI);
oct->reg_list.pci_win_rd_data_lo =
(u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_DATA_LO);
oct->reg_list.pci_win_rd_data =
(u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_DATA64);
cn23xx_get_pcie_qlmport(oct);
cn23xx->intr_mask64 = CN23XX_INTR_MASK;
if (!oct->msix_on)
cn23xx->intr_mask64 |= CN23XX_INTR_PKT_TIME;
if (oct->rev_id >= OCTEON_CN23XX_REV_1_1)
cn23xx->intr_mask64 |= CN23XX_INTR_VF_MBOX;
cn23xx->intr_sum_reg64 =
bar0_pciaddr +
CN23XX_SLI_MAC_PF_INT_SUM64(oct->pcie_port, oct->pf_num);
cn23xx->intr_enb_reg64 =
bar0_pciaddr +
CN23XX_SLI_MAC_PF_INT_ENB64(oct->pcie_port, oct->pf_num);
}
static int cn23xx_sriov_config(struct octeon_device *oct)
{
u32 total_rings;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
/* num_vfs is already filled for us */
u32 pf_srn, num_pf_rings;
cn23xx->conf =
(struct octeon_config *)oct_get_config_info(oct, LIO_23XX);
switch (oct->rev_id) {
case OCTEON_CN23XX_REV_1_0:
total_rings = CN23XX_MAX_RINGS_PER_PF_PASS_1_0;
break;
case OCTEON_CN23XX_REV_1_1:
total_rings = CN23XX_MAX_RINGS_PER_PF_PASS_1_1;
break;
default:
total_rings = CN23XX_MAX_RINGS_PER_PF;
break;
}
if (!oct->sriov_info.num_pf_rings) {
if (total_rings > num_present_cpus())
num_pf_rings = num_present_cpus();
else
num_pf_rings = total_rings;
} else {
num_pf_rings = oct->sriov_info.num_pf_rings;
if (num_pf_rings > total_rings) {
dev_warn(&oct->pci_dev->dev,
"num_queues_per_pf requested %u is more than available rings. Reducing to %u\n",
num_pf_rings, total_rings);
num_pf_rings = total_rings;
}
}
total_rings = num_pf_rings;
/* the first ring of the pf */
pf_srn = total_rings - num_pf_rings;
oct->sriov_info.trs = total_rings;
oct->sriov_info.pf_srn = pf_srn;
oct->sriov_info.num_pf_rings = num_pf_rings;
dev_dbg(&oct->pci_dev->dev, "trs:%d pf_srn:%d num_pf_rings:%d\n",
oct->sriov_info.trs, oct->sriov_info.pf_srn,
oct->sriov_info.num_pf_rings);
return 0;
}
int setup_cn23xx_octeon_pf_device(struct octeon_device *oct)
{
if (octeon_map_pci_barx(oct, 0, 0))
return 1;
if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) {
dev_err(&oct->pci_dev->dev, "%s CN23XX BAR1 map failed\n",
__func__);
octeon_unmap_pci_barx(oct, 0);
return 1;
}
cn23xx_get_pf_num(oct);
if (cn23xx_sriov_config(oct)) {
octeon_unmap_pci_barx(oct, 0);
octeon_unmap_pci_barx(oct, 1);
return 1;
}
octeon_write_csr64(oct, CN23XX_SLI_MAC_CREDIT_CNT, 0x3F802080802080ULL);
oct->fn_list.setup_iq_regs = cn23xx_setup_iq_regs;
oct->fn_list.setup_oq_regs = cn23xx_setup_oq_regs;
oct->fn_list.process_interrupt_regs = cn23xx_interrupt_handler;
oct->fn_list.msix_interrupt_handler = cn23xx_pf_msix_interrupt_handler;
oct->fn_list.soft_reset = cn23xx_pf_soft_reset;
oct->fn_list.setup_device_regs = cn23xx_setup_pf_device_regs;
oct->fn_list.enable_interrupt = cn23xx_enable_pf_interrupt;
oct->fn_list.disable_interrupt = cn23xx_disable_pf_interrupt;
oct->fn_list.enable_io_queues = cn23xx_enable_io_queues;
oct->fn_list.disable_io_queues = cn23xx_disable_io_queues;
cn23xx_setup_reg_address(oct);
oct->coproc_clock_rate = 1000000ULL * cn23xx_coprocessor_clock(oct);
return 0;
}
int validate_cn23xx_pf_config_info(struct octeon_device *oct,
struct octeon_config *conf23xx)
{
if (CFG_GET_IQ_MAX_Q(conf23xx) > CN23XX_MAX_INPUT_QUEUES) {
dev_err(&oct->pci_dev->dev, "%s: Num IQ (%d) exceeds Max (%d)\n",
__func__, CFG_GET_IQ_MAX_Q(conf23xx),
CN23XX_MAX_INPUT_QUEUES);
return 1;
}
if (CFG_GET_OQ_MAX_Q(conf23xx) > CN23XX_MAX_OUTPUT_QUEUES) {
dev_err(&oct->pci_dev->dev, "%s: Num OQ (%d) exceeds Max (%d)\n",
__func__, CFG_GET_OQ_MAX_Q(conf23xx),
CN23XX_MAX_OUTPUT_QUEUES);
return 1;
}
if (CFG_GET_IQ_INSTR_TYPE(conf23xx) != OCTEON_32BYTE_INSTR &&
CFG_GET_IQ_INSTR_TYPE(conf23xx) != OCTEON_64BYTE_INSTR) {
dev_err(&oct->pci_dev->dev, "%s: Invalid instr type for IQ\n",
__func__);
return 1;
}
if (!(CFG_GET_OQ_INFO_PTR(conf23xx)) ||
!(CFG_GET_OQ_REFILL_THRESHOLD(conf23xx))) {
dev_err(&oct->pci_dev->dev, "%s: Invalid parameter for OQ\n",
__func__);
return 1;
}
if (!(CFG_GET_OQ_INTR_TIME(conf23xx))) {
dev_err(&oct->pci_dev->dev, "%s: Invalid parameter for OQ\n",
__func__);
return 1;
}
return 0;
}
void cn23xx_dump_iq_regs(struct octeon_device *oct)
{
u32 regval, q_no;
dev_dbg(&oct->pci_dev->dev, "SLI_IQ_DOORBELL_0 [0x%x]: 0x%016llx\n",
CN23XX_SLI_IQ_DOORBELL(0),
CVM_CAST64(octeon_read_csr64
(oct, CN23XX_SLI_IQ_DOORBELL(0))));
dev_dbg(&oct->pci_dev->dev, "SLI_IQ_BASEADDR_0 [0x%x]: 0x%016llx\n",
CN23XX_SLI_IQ_BASE_ADDR64(0),
CVM_CAST64(octeon_read_csr64
(oct, CN23XX_SLI_IQ_BASE_ADDR64(0))));
dev_dbg(&oct->pci_dev->dev, "SLI_IQ_FIFO_RSIZE_0 [0x%x]: 0x%016llx\n",
CN23XX_SLI_IQ_SIZE(0),
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_IQ_SIZE(0))));
dev_dbg(&oct->pci_dev->dev, "SLI_CTL_STATUS [0x%x]: 0x%016llx\n",
CN23XX_SLI_CTL_STATUS,
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_CTL_STATUS)));
for (q_no = 0; q_no < CN23XX_MAX_INPUT_QUEUES; q_no++) {
dev_dbg(&oct->pci_dev->dev, "SLI_PKT[%d]_INPUT_CTL [0x%x]: 0x%016llx\n",
q_no, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
CVM_CAST64(octeon_read_csr64
(oct,
CN23XX_SLI_IQ_PKT_CONTROL64(q_no))));
}
pci_read_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, &regval);
dev_dbg(&oct->pci_dev->dev, "Config DevCtl [0x%x]: 0x%08x\n",
CN23XX_CONFIG_PCIE_DEVCTL, regval);
dev_dbg(&oct->pci_dev->dev, "SLI_PRT[%d]_CFG [0x%llx]: 0x%016llx\n",
oct->pcie_port, CN23XX_DPI_SLI_PRTX_CFG(oct->pcie_port),
CVM_CAST64(lio_pci_readq(
oct, CN23XX_DPI_SLI_PRTX_CFG(oct->pcie_port))));
dev_dbg(&oct->pci_dev->dev, "SLI_S2M_PORT[%d]_CTL [0x%x]: 0x%016llx\n",
oct->pcie_port, CN23XX_SLI_S2M_PORTX_CTL(oct->pcie_port),
CVM_CAST64(octeon_read_csr64(
oct, CN23XX_SLI_S2M_PORTX_CTL(oct->pcie_port))));
}
int cn23xx_fw_loaded(struct octeon_device *oct)
{
u64 val;
val = octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1);
return (val >> 1) & 1ULL;
}
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2015 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
/*! \file cn23xx_device.h
* \brief Host Driver: Routines that perform CN23XX specific operations.
*/
#ifndef __CN23XX_PF_DEVICE_H__
#define __CN23XX_PF_DEVICE_H__
#include "cn23xx_pf_regs.h"
/* Register address and configuration for a CN23XX devices.
* If device specific changes need to be made then add a struct to include
* device specific fields as shown in the commented section
*/
struct octeon_cn23xx_pf {
/** PCI interrupt summary register */
u8 __iomem *intr_sum_reg64;
/** PCI interrupt enable register */
u8 __iomem *intr_enb_reg64;
/** The PCI interrupt mask used by interrupt handler */
u64 intr_mask64;
struct octeon_config *conf;
};
int setup_cn23xx_octeon_pf_device(struct octeon_device *oct);
int validate_cn23xx_pf_config_info(struct octeon_device *oct,
struct octeon_config *conf23xx);
void cn23xx_dump_pf_initialized_regs(struct octeon_device *oct);
int cn23xx_fw_loaded(struct octeon_device *oct);
#endif
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2015 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
/*! \file cn23xx_regs.h
* \brief Host Driver: Register Address and Register Mask values for
* Octeon CN23XX devices.
*/
#ifndef __CN23XX_PF_REGS_H__
#define __CN23XX_PF_REGS_H__
#define CN23XX_CONFIG_VENDOR_ID 0x00
#define CN23XX_CONFIG_DEVICE_ID 0x02
#define CN23XX_CONFIG_XPANSION_BAR 0x38
#define CN23XX_CONFIG_MSIX_CAP 0x50
#define CN23XX_CONFIG_MSIX_LMSI 0x54
#define CN23XX_CONFIG_MSIX_UMSI 0x58
#define CN23XX_CONFIG_MSIX_MSIMD 0x5C
#define CN23XX_CONFIG_MSIX_MSIMM 0x60
#define CN23XX_CONFIG_MSIX_MSIMP 0x64
#define CN23XX_CONFIG_PCIE_CAP 0x70
#define CN23XX_CONFIG_PCIE_DEVCAP 0x74
#define CN23XX_CONFIG_PCIE_DEVCTL 0x78
#define CN23XX_CONFIG_PCIE_LINKCAP 0x7C
#define CN23XX_CONFIG_PCIE_LINKCTL 0x80
#define CN23XX_CONFIG_PCIE_SLOTCAP 0x84
#define CN23XX_CONFIG_PCIE_SLOTCTL 0x88
#define CN23XX_CONFIG_PCIE_DEVCTL2 0x98
#define CN23XX_CONFIG_PCIE_LINKCTL2 0xA0
#define CN23XX_CONFIG_PCIE_UNCORRECT_ERR_MASK 0x108
#define CN23XX_CONFIG_PCIE_CORRECT_ERR_STATUS 0x110
#define CN23XX_CONFIG_PCIE_DEVCTL_MASK 0x00040000
#define CN23XX_PCIE_SRIOV_FDL 0x188
#define CN23XX_PCIE_SRIOV_FDL_BIT_POS 0x10
#define CN23XX_PCIE_SRIOV_FDL_MASK 0xFF
#define CN23XX_CONFIG_PCIE_FLTMSK 0x720
#define CN23XX_CONFIG_SRIOV_VFDEVID 0x190
#define CN23XX_CONFIG_SRIOV_BAR_START 0x19C
#define CN23XX_CONFIG_SRIOV_BARX(i) \
(CN23XX_CONFIG_SRIOV_BAR_START + (i * 4))
#define CN23XX_CONFIG_SRIOV_BAR_PF 0x08
#define CN23XX_CONFIG_SRIOV_BAR_64BIT 0x04
#define CN23XX_CONFIG_SRIOV_BAR_IO 0x01
/* ############## BAR0 Registers ################ */
#define CN23XX_SLI_CTL_PORT_START 0x286E0
#define CN23XX_PORT_OFFSET 0x10
#define CN23XX_SLI_CTL_PORT(p) \
(CN23XX_SLI_CTL_PORT_START + ((p) * CN23XX_PORT_OFFSET))
/* 2 scatch registers (64-bit) */
#define CN23XX_SLI_WINDOW_CTL 0x282E0
#define CN23XX_SLI_SCRATCH1 0x283C0
#define CN23XX_SLI_SCRATCH2 0x283D0
#define CN23XX_SLI_WINDOW_CTL_DEFAULT 0x200000ULL
/* 1 registers (64-bit) - SLI_CTL_STATUS */
#define CN23XX_SLI_CTL_STATUS 0x28570
/* SLI Packet Input Jabber Register (64 bit register)
* <31:0> for Byte count for limiting sizes of packet sizes
* that are allowed for sli packet inbound packets.
* the default value is 0xFA00(=64000).
*/
#define CN23XX_SLI_PKT_IN_JABBER 0x29170
/* The input jabber is used to determine the TSO max size.
* Due to H/W limitation, this need to be reduced to 60000
* in order to to H/W TSO and avoid the WQE malfarmation
* PKO_BUG_24989_WQE_LEN
*/
#define CN23XX_DEFAULT_INPUT_JABBER 0xEA60 /*60000*/
#define CN23XX_WIN_WR_ADDR_LO 0x20000
#define CN23XX_WIN_WR_ADDR_HI 0x20004
#define CN23XX_WIN_WR_ADDR64 CN23XX_WIN_WR_ADDR_LO
#define CN23XX_WIN_RD_ADDR_LO 0x20010
#define CN23XX_WIN_RD_ADDR_HI 0x20014
#define CN23XX_WIN_RD_ADDR64 CN23XX_WIN_RD_ADDR_LO
#define CN23XX_WIN_WR_DATA_LO 0x20020
#define CN23XX_WIN_WR_DATA_HI 0x20024
#define CN23XX_WIN_WR_DATA64 CN23XX_WIN_WR_DATA_LO
#define CN23XX_WIN_RD_DATA_LO 0x20040
#define CN23XX_WIN_RD_DATA_HI 0x20044
#define CN23XX_WIN_RD_DATA64 CN23XX_WIN_RD_DATA_LO
#define CN23XX_WIN_WR_MASK_LO 0x20030
#define CN23XX_WIN_WR_MASK_HI 0x20034
#define CN23XX_WIN_WR_MASK_REG CN23XX_WIN_WR_MASK_LO
#define CN23XX_SLI_MAC_CREDIT_CNT 0x23D70
/* 4 registers (64-bit) for mapping IOQs to MACs(PEMs)-
* SLI_PKT_MAC(0..3)_PF(0..1)_RINFO
*/
#define CN23XX_SLI_PKT_MAC_RINFO_START64 0x29030
/*1 register (64-bit) to determine whether IOQs are in reset. */
#define CN23XX_SLI_PKT_IOQ_RING_RST 0x291E0
/* Each Input Queue register is at a 16-byte Offset in BAR0 */
#define CN23XX_IQ_OFFSET 0x20000
#define CN23XX_MAC_RINFO_OFFSET 0x20
#define CN23XX_PF_RINFO_OFFSET 0x10
#define CN23XX_SLI_PKT_MAC_RINFO64(mac, pf) \
(CN23XX_SLI_PKT_MAC_RINFO_START64 + \
((mac) * CN23XX_MAC_RINFO_OFFSET) + \
((pf) * CN23XX_PF_RINFO_OFFSET))
/** mask for total rings, setting TRS to base */
#define CN23XX_PKT_MAC_CTL_RINFO_TRS BIT_ULL(16)
/** mask for starting ring number: setting SRN <6:0> = 0x7F */
#define CN23XX_PKT_MAC_CTL_RINFO_SRN (0x7F)
/* Starting bit of the TRS field in CN23XX_SLI_PKT_MAC_RINFO64 register */
#define CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS 16
/* Starting bit of SRN field in CN23XX_SLI_PKT_MAC_RINFO64 register */
#define CN23XX_PKT_MAC_CTL_RINFO_SRN_BIT_POS 0
/* Starting bit of RPVF field in CN23XX_SLI_PKT_MAC_RINFO64 register */
#define CN23XX_PKT_MAC_CTL_RINFO_RPVF_BIT_POS 32
/* Starting bit of NVFS field in CN23XX_SLI_PKT_MAC_RINFO64 register */
#define CN23XX_PKT_MAC_CTL_RINFO_NVFS_BIT_POS 48
/*###################### REQUEST QUEUE #########################*/
/* 64 registers for Input Queue Instr Count - SLI_PKT_IN_DONE0_CNTS */
#define CN23XX_SLI_IQ_INSTR_COUNT_START64 0x10040
/* 64 registers for Input Queues Start Addr - SLI_PKT0_INSTR_BADDR */
#define CN23XX_SLI_IQ_BASE_ADDR_START64 0x10010
/* 64 registers for Input Doorbell - SLI_PKT0_INSTR_BAOFF_DBELL */
#define CN23XX_SLI_IQ_DOORBELL_START 0x10020
/* 64 registers for Input Queue size - SLI_PKT0_INSTR_FIFO_RSIZE */
#define CN23XX_SLI_IQ_SIZE_START 0x10030
/* 64 registers (64-bit) - ES, RO, NS, Arbitration for Input Queue Data &
* gather list fetches. SLI_PKT(0..63)_INPUT_CONTROL.
*/
#define CN23XX_SLI_IQ_PKT_CONTROL_START64 0x10000
/*------- Request Queue Macros ---------*/
#define CN23XX_SLI_IQ_PKT_CONTROL64(iq) \
(CN23XX_SLI_IQ_PKT_CONTROL_START64 + ((iq) * CN23XX_IQ_OFFSET))
#define CN23XX_SLI_IQ_BASE_ADDR64(iq) \
(CN23XX_SLI_IQ_BASE_ADDR_START64 + ((iq) * CN23XX_IQ_OFFSET))
#define CN23XX_SLI_IQ_SIZE(iq) \
(CN23XX_SLI_IQ_SIZE_START + ((iq) * CN23XX_IQ_OFFSET))
#define CN23XX_SLI_IQ_DOORBELL(iq) \
(CN23XX_SLI_IQ_DOORBELL_START + ((iq) * CN23XX_IQ_OFFSET))
#define CN23XX_SLI_IQ_INSTR_COUNT64(iq) \
(CN23XX_SLI_IQ_INSTR_COUNT_START64 + ((iq) * CN23XX_IQ_OFFSET))
/*------------------ Masks ----------------*/
#define CN23XX_PKT_INPUT_CTL_VF_NUM BIT_ULL(32)
#define CN23XX_PKT_INPUT_CTL_MAC_NUM BIT(29)
/* Number of instructions to be read in one MAC read request.
* setting to Max value(4)
*/
#define CN23XX_PKT_INPUT_CTL_RDSIZE (3 << 25)
#define CN23XX_PKT_INPUT_CTL_IS_64B BIT(24)
#define CN23XX_PKT_INPUT_CTL_RST BIT(23)
#define CN23XX_PKT_INPUT_CTL_QUIET BIT(28)
#define CN23XX_PKT_INPUT_CTL_RING_ENB BIT(22)
#define CN23XX_PKT_INPUT_CTL_DATA_NS BIT(8)
#define CN23XX_PKT_INPUT_CTL_DATA_ES_64B_SWAP BIT(6)
#define CN23XX_PKT_INPUT_CTL_DATA_RO BIT(5)
#define CN23XX_PKT_INPUT_CTL_USE_CSR BIT(4)
#define CN23XX_PKT_INPUT_CTL_GATHER_NS BIT(3)
#define CN23XX_PKT_INPUT_CTL_GATHER_ES_64B_SWAP (2)
#define CN23XX_PKT_INPUT_CTL_GATHER_RO (1)
/** Rings per Virtual Function **/
#define CN23XX_PKT_INPUT_CTL_RPVF_MASK (0x3F)
#define CN23XX_PKT_INPUT_CTL_RPVF_POS (48)
/** These bits[47:44] select the Physical function number within the MAC */
#define CN23XX_PKT_INPUT_CTL_PF_NUM_MASK (0x7)
#define CN23XX_PKT_INPUT_CTL_PF_NUM_POS (45)
/** These bits[43:32] select the function number within the PF */
#define CN23XX_PKT_INPUT_CTL_VF_NUM_MASK (0x1FFF)
#define CN23XX_PKT_INPUT_CTL_VF_NUM_POS (32)
#define CN23XX_PKT_INPUT_CTL_MAC_NUM_MASK (0x3)
#define CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29)
#define CN23XX_PKT_IN_DONE_WMARK_MASK (0xFFFFULL)
#define CN23XX_PKT_IN_DONE_WMARK_BIT_POS (32)
#define CN23XX_PKT_IN_DONE_CNT_MASK (0x00000000FFFFFFFFULL)
#ifdef __LITTLE_ENDIAN_BITFIELD
#define CN23XX_PKT_INPUT_CTL_MASK \
(CN23XX_PKT_INPUT_CTL_RDSIZE | \
CN23XX_PKT_INPUT_CTL_DATA_ES_64B_SWAP | \
CN23XX_PKT_INPUT_CTL_USE_CSR)
#else
#define CN23XX_PKT_INPUT_CTL_MASK \
(CN23XX_PKT_INPUT_CTL_RDSIZE | \
CN23XX_PKT_INPUT_CTL_DATA_ES_64B_SWAP | \
CN23XX_PKT_INPUT_CTL_USE_CSR | \
CN23XX_PKT_INPUT_CTL_GATHER_ES_64B_SWAP)
#endif
/** Masks for SLI_PKT_IN_DONE(0..63)_CNTS Register */
#define CN23XX_IN_DONE_CNTS_PI_INT BIT_ULL(62)
#define CN23XX_IN_DONE_CNTS_CINT_ENB BIT_ULL(48)
/*############################ OUTPUT QUEUE #########################*/
/* 64 registers for Output queue control - SLI_PKT(0..63)_OUTPUT_CONTROL */
#define CN23XX_SLI_OQ_PKT_CONTROL_START 0x10050
/* 64 registers for Output queue buffer and info size - SLI_PKT0_OUT_SIZE */
#define CN23XX_SLI_OQ0_BUFF_INFO_SIZE 0x10060
/* 64 registers for Output Queue Start Addr - SLI_PKT0_SLIST_BADDR */
#define CN23XX_SLI_OQ_BASE_ADDR_START64 0x10070
/* 64 registers for Output Queue Packet Credits - SLI_PKT0_SLIST_BAOFF_DBELL */
#define CN23XX_SLI_OQ_PKT_CREDITS_START 0x10080
/* 64 registers for Output Queue size - SLI_PKT0_SLIST_FIFO_RSIZE */
#define CN23XX_SLI_OQ_SIZE_START 0x10090
/* 64 registers for Output Queue Packet Count - SLI_PKT0_CNTS */
#define CN23XX_SLI_OQ_PKT_SENT_START 0x100B0
/* 64 registers for Output Queue INT Levels - SLI_PKT0_INT_LEVELS */
#define CN23XX_SLI_OQ_PKT_INT_LEVELS_START64 0x100A0
/* Each Output Queue register is at a 16-byte Offset in BAR0 */
#define CN23XX_OQ_OFFSET 0x20000
/* 1 (64-bit register) for Output Queue backpressure across all rings. */
#define CN23XX_SLI_OQ_WMARK 0x29180
/* Global pkt control register */
#define CN23XX_SLI_GBL_CONTROL 0x29210
/* Backpressure enable register for PF0 */
#define CN23XX_SLI_OUT_BP_EN_W1S 0x29260
/* Backpressure enable register for PF1 */
#define CN23XX_SLI_OUT_BP_EN2_W1S 0x29270
/* Backpressure disable register for PF0 */
#define CN23XX_SLI_OUT_BP_EN_W1C 0x29280
/* Backpressure disable register for PF1 */
#define CN23XX_SLI_OUT_BP_EN2_W1C 0x29290
/*------- Output Queue Macros ---------*/
#define CN23XX_SLI_OQ_PKT_CONTROL(oq) \
(CN23XX_SLI_OQ_PKT_CONTROL_START + ((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_BASE_ADDR64(oq) \
(CN23XX_SLI_OQ_BASE_ADDR_START64 + ((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_SIZE(oq) \
(CN23XX_SLI_OQ_SIZE_START + ((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_BUFF_INFO_SIZE(oq) \
(CN23XX_SLI_OQ0_BUFF_INFO_SIZE + ((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_PKTS_SENT(oq) \
(CN23XX_SLI_OQ_PKT_SENT_START + ((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_PKTS_CREDIT(oq) \
(CN23XX_SLI_OQ_PKT_CREDITS_START + ((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_PKT_INT_LEVELS(oq) \
(CN23XX_SLI_OQ_PKT_INT_LEVELS_START64 + \
((oq) * CN23XX_OQ_OFFSET))
/*Macro's for accessing CNT and TIME separately from INT_LEVELS*/
#define CN23XX_SLI_OQ_PKT_INT_LEVELS_CNT(oq) \
(CN23XX_SLI_OQ_PKT_INT_LEVELS_START64 + \
((oq) * CN23XX_OQ_OFFSET))
#define CN23XX_SLI_OQ_PKT_INT_LEVELS_TIME(oq) \
(CN23XX_SLI_OQ_PKT_INT_LEVELS_START64 + \
((oq) * CN23XX_OQ_OFFSET) + 4)
/*------------------ Masks ----------------*/
#define CN23XX_PKT_OUTPUT_CTL_TENB BIT(13)
#define CN23XX_PKT_OUTPUT_CTL_CENB BIT(12)
#define CN23XX_PKT_OUTPUT_CTL_IPTR BIT(11)
#define CN23XX_PKT_OUTPUT_CTL_ES BIT(9)
#define CN23XX_PKT_OUTPUT_CTL_NSR BIT(8)
#define CN23XX_PKT_OUTPUT_CTL_ROR BIT(7)
#define CN23XX_PKT_OUTPUT_CTL_DPTR BIT(6)
#define CN23XX_PKT_OUTPUT_CTL_BMODE BIT(5)
#define CN23XX_PKT_OUTPUT_CTL_ES_P BIT(3)
#define CN23XX_PKT_OUTPUT_CTL_NSR_P BIT(2)
#define CN23XX_PKT_OUTPUT_CTL_ROR_P BIT(1)
#define CN23XX_PKT_OUTPUT_CTL_RING_ENB BIT(0)
/*######################### Mailbox Reg Macros ########################*/
#define CN23XX_SLI_PKT_MBOX_INT_START 0x10210
#define CN23XX_SLI_PKT_PF_VF_MBOX_SIG_START 0x10200
#define CN23XX_SLI_MAC_PF_MBOX_INT_START 0x27380
#define CN23XX_SLI_MBOX_OFFSET 0x20000
#define CN23XX_SLI_MBOX_SIG_IDX_OFFSET 0x8
#define CN23XX_SLI_PKT_MBOX_INT(q) \
(CN23XX_SLI_PKT_MBOX_INT_START + ((q) * CN23XX_SLI_MBOX_OFFSET))
#define CN23XX_SLI_PKT_PF_VF_MBOX_SIG(q, idx) \
(CN23XX_SLI_PKT_PF_VF_MBOX_SIG_START + \
((q) * CN23XX_SLI_MBOX_OFFSET + \
(idx) * CN23XX_SLI_MBOX_SIG_IDX_OFFSET))
#define CN23XX_SLI_MAC_PF_MBOX_INT(mac, pf) \
(CN23XX_SLI_MAC_PF_MBOX_INT_START + \
((mac) * CN23XX_MAC_INT_OFFSET + \
(pf) * CN23XX_PF_INT_OFFSET))
/*######################### DMA Counters #########################*/
/* 2 registers (64-bit) - DMA Count - 1 for each DMA counter 0/1. */
#define CN23XX_DMA_CNT_START 0x28400
/* 2 registers (64-bit) - DMA Timer 0/1, contains DMA timer values */
/* SLI_DMA_0_TIM */
#define CN23XX_DMA_TIM_START 0x28420
/* 2 registers (64-bit) - DMA count & Time Interrupt threshold -
* SLI_DMA_0_INT_LEVEL
*/
#define CN23XX_DMA_INT_LEVEL_START 0x283E0
/* Each DMA register is at a 16-byte Offset in BAR0 */
#define CN23XX_DMA_OFFSET 0x10
/*---------- DMA Counter Macros ---------*/
#define CN23XX_DMA_CNT(dq) \
(CN23XX_DMA_CNT_START + ((dq) * CN23XX_DMA_OFFSET))
#define CN23XX_DMA_INT_LEVEL(dq) \
(CN23XX_DMA_INT_LEVEL_START + ((dq) * CN23XX_DMA_OFFSET))
#define CN23XX_DMA_PKT_INT_LEVEL(dq) \
(CN23XX_DMA_INT_LEVEL_START + ((dq) * CN23XX_DMA_OFFSET))
#define CN23XX_DMA_TIME_INT_LEVEL(dq) \
(CN23XX_DMA_INT_LEVEL_START + 4 + ((dq) * CN23XX_DMA_OFFSET))
#define CN23XX_DMA_TIM(dq) \
(CN23XX_DMA_TIM_START + ((dq) * CN23XX_DMA_OFFSET))
/*######################## MSIX TABLE #########################*/
#define CN23XX_MSIX_TABLE_ADDR_START 0x0
#define CN23XX_MSIX_TABLE_DATA_START 0x8
#define CN23XX_MSIX_TABLE_SIZE 0x10
#define CN23XX_MSIX_TABLE_ENTRIES 0x41
#define CN23XX_MSIX_ENTRY_VECTOR_CTL BIT_ULL(32)
#define CN23XX_MSIX_TABLE_ADDR(idx) \
(CN23XX_MSIX_TABLE_ADDR_START + ((idx) * CN23XX_MSIX_TABLE_SIZE))
#define CN23XX_MSIX_TABLE_DATA(idx) \
(CN23XX_MSIX_TABLE_DATA_START + ((idx) * CN23XX_MSIX_TABLE_SIZE))
/*######################## INTERRUPTS #########################*/
#define CN23XX_MAC_INT_OFFSET 0x20
#define CN23XX_PF_INT_OFFSET 0x10
/* 1 register (64-bit) for Interrupt Summary */
#define CN23XX_SLI_INT_SUM64 0x27000
/* 4 registers (64-bit) for Interrupt Enable for each Port */
#define CN23XX_SLI_INT_ENB64 0x27080
#define CN23XX_SLI_MAC_PF_INT_SUM64(mac, pf) \
(CN23XX_SLI_INT_SUM64 + \
((mac) * CN23XX_MAC_INT_OFFSET) + \
((pf) * CN23XX_PF_INT_OFFSET))
#define CN23XX_SLI_MAC_PF_INT_ENB64(mac, pf) \
(CN23XX_SLI_INT_ENB64 + \
((mac) * CN23XX_MAC_INT_OFFSET) + \
((pf) * CN23XX_PF_INT_OFFSET))
/* 1 register (64-bit) to indicate which Output Queue reached pkt threshold */
#define CN23XX_SLI_PKT_CNT_INT 0x29130
/* 1 register (64-bit) to indicate which Output Queue reached time threshold */
#define CN23XX_SLI_PKT_TIME_INT 0x29140
/*------------------ Interrupt Masks ----------------*/
#define CN23XX_INTR_PO_INT BIT_ULL(63)
#define CN23XX_INTR_PI_INT BIT_ULL(62)
#define CN23XX_INTR_MBOX_INT BIT_ULL(61)
#define CN23XX_INTR_RESEND BIT_ULL(60)
#define CN23XX_INTR_CINT_ENB BIT_ULL(48)
#define CN23XX_INTR_MBOX_ENB BIT(0)
#define CN23XX_INTR_RML_TIMEOUT_ERR (1)
#define CN23XX_INTR_MIO_INT BIT(1)
#define CN23XX_INTR_RESERVED1 (3 << 2)
#define CN23XX_INTR_PKT_COUNT BIT(4)
#define CN23XX_INTR_PKT_TIME BIT(5)
#define CN23XX_INTR_RESERVED2 (3 << 6)
#define CN23XX_INTR_M0UPB0_ERR BIT(8)
#define CN23XX_INTR_M0UPWI_ERR BIT(9)
#define CN23XX_INTR_M0UNB0_ERR BIT(10)
#define CN23XX_INTR_M0UNWI_ERR BIT(11)
#define CN23XX_INTR_RESERVED3 (0xFFFFFULL << 12)
#define CN23XX_INTR_DMA0_FORCE BIT_ULL(32)
#define CN23XX_INTR_DMA1_FORCE BIT_ULL(33)
#define CN23XX_INTR_DMA0_COUNT BIT_ULL(34)
#define CN23XX_INTR_DMA1_COUNT BIT_ULL(35)
#define CN23XX_INTR_DMA0_TIME BIT_ULL(36)
#define CN23XX_INTR_DMA1_TIME BIT_ULL(37)
#define CN23XX_INTR_RESERVED4 (0x7FFFFULL << 38)
#define CN23XX_INTR_VF_MBOX BIT_ULL(57)
#define CN23XX_INTR_DMAVF_ERR BIT_ULL(58)
#define CN23XX_INTR_DMAPF_ERR BIT_ULL(59)
#define CN23XX_INTR_PKTVF_ERR BIT_ULL(60)
#define CN23XX_INTR_PKTPF_ERR BIT_ULL(61)
#define CN23XX_INTR_PPVF_ERR BIT_ULL(62)
#define CN23XX_INTR_PPPF_ERR BIT_ULL(63)
#define CN23XX_INTR_DMA0_DATA (CN23XX_INTR_DMA0_TIME)
#define CN23XX_INTR_DMA1_DATA (CN23XX_INTR_DMA1_TIME)
#define CN23XX_INTR_DMA_DATA \
(CN23XX_INTR_DMA0_DATA | CN23XX_INTR_DMA1_DATA)
/* By fault only TIME based */
#define CN23XX_INTR_PKT_DATA (CN23XX_INTR_PKT_TIME)
/* For both COUNT and TIME based */
/* #define CN23XX_INTR_PKT_DATA \
* (CN23XX_INTR_PKT_COUNT | CN23XX_INTR_PKT_TIME)
*/
/* Sum of interrupts for all PCI-Express Data Interrupts */
#define CN23XX_INTR_PCIE_DATA \
(CN23XX_INTR_DMA_DATA | CN23XX_INTR_PKT_DAT)
/* Sum of interrupts for error events */
#define CN23XX_INTR_ERR \
(CN23XX_INTR_M0UPB0_ERR | \
CN23XX_INTR_M0UPWI_ERR | \
CN23XX_INTR_M0UNB0_ERR | \
CN23XX_INTR_M0UNWI_ERR | \
CN23XX_INTR_DMAVF_ERR | \
CN23XX_INTR_DMAPF_ERR | \
CN23XX_INTR_PKTPF_ERR | \
CN23XX_INTR_PPPF_ERR | \
CN23XX_INTR_PPVF_ERR)
/* Programmed Mask for Interrupt Sum */
#define CN23XX_INTR_MASK \
(CN23XX_INTR_DMA_DATA | \
CN23XX_INTR_DMA0_FORCE | \
CN23XX_INTR_DMA1_FORCE | \
CN23XX_INTR_MIO_INT | \
CN23XX_INTR_ERR)
/* 4 Registers (64 - bit) */
#define CN23XX_SLI_S2M_PORT_CTL_START 0x23D80
#define CN23XX_SLI_S2M_PORTX_CTL(port) \
(CN23XX_SLI_S2M_PORT_CTL_START + (port * 0x10))
#define CN23XX_SLI_MAC_NUMBER 0x20050
/** PEM(0..3)_BAR1_INDEX(0..15)address is defined as
* addr = (0x00011800C0000100 |port <<24 |idx <<3 )
* Here, port is PEM(0..3) & idx is INDEX(0..15)
*/
#define CN23XX_PEM_BAR1_INDEX_START 0x00011800C0000100ULL
#define CN23XX_PEM_OFFSET 24
#define CN23XX_BAR1_INDEX_OFFSET 3
#define CN23XX_PEM_BAR1_INDEX_REG(port, idx) \
(CN23XX_PEM_BAR1_INDEX_START + ((port) << CN23XX_PEM_OFFSET) + \
((idx) << CN23XX_BAR1_INDEX_OFFSET))
/*############################ DPI #########################*/
/* 1 register (64-bit) - provides DMA Enable */
#define CN23XX_DPI_CTL 0x0001df0000000040ULL
/* 1 register (64-bit) - Controls the DMA IO Operation */
#define CN23XX_DPI_DMA_CONTROL 0x0001df0000000048ULL
/* 1 register (64-bit) - Provides DMA Instr'n Queue Enable */
#define CN23XX_DPI_REQ_GBL_ENB 0x0001df0000000050ULL
/* 1 register (64-bit) - DPI_REQ_ERR_RSP
* Indicates which Instr'n Queue received error response from the IO sub-system
*/
#define CN23XX_DPI_REQ_ERR_RSP 0x0001df0000000058ULL
/* 1 register (64-bit) - DPI_REQ_ERR_RST
* Indicates which Instr'n Queue dropped an Instr'n
*/
#define CN23XX_DPI_REQ_ERR_RST 0x0001df0000000060ULL
/* 6 register (64-bit) - DPI_DMA_ENG(0..5)_EN
* Provides DMA Engine Queue Enable
*/
#define CN23XX_DPI_DMA_ENG0_ENB 0x0001df0000000080ULL
#define CN23XX_DPI_DMA_ENG_ENB(eng) (CN23XX_DPI_DMA_ENG0_ENB + (eng * 8))
/* 8 register (64-bit) - DPI_DMA(0..7)_REQQ_CTL
* Provides control bits for transaction on 8 Queues
*/
#define CN23XX_DPI_DMA_REQQ0_CTL 0x0001df0000000180ULL
#define CN23XX_DPI_DMA_REQQ_CTL(q_no) \
(CN23XX_DPI_DMA_REQQ0_CTL + (q_no * 8))
/* 6 register (64-bit) - DPI_ENG(0..5)_BUF
* Provides DMA Engine FIFO (Queue) Size
*/
#define CN23XX_DPI_DMA_ENG0_BUF 0x0001df0000000880ULL
#define CN23XX_DPI_DMA_ENG_BUF(eng) \
(CN23XX_DPI_DMA_ENG0_BUF + (eng * 8))
/* 4 Registers (64-bit) */
#define CN23XX_DPI_SLI_PRT_CFG_START 0x0001df0000000900ULL
#define CN23XX_DPI_SLI_PRTX_CFG(port) \
(CN23XX_DPI_SLI_PRT_CFG_START + (port * 0x8))
/* Masks for DPI_DMA_CONTROL Register */
#define CN23XX_DPI_DMA_COMMIT_MODE BIT_ULL(58)
#define CN23XX_DPI_DMA_PKT_EN BIT_ULL(56)
#define CN23XX_DPI_DMA_ENB (0x0FULL << 48)
/* Set the DMA Control, to update packet count not byte count sent by DMA,
* when we use Interrupt Coalescing (CA mode)
*/
#define CN23XX_DPI_DMA_O_ADD1 BIT(19)
/*selecting 64-bit Byte Swap Mode */
#define CN23XX_DPI_DMA_O_ES BIT(15)
#define CN23XX_DPI_DMA_O_MODE BIT(14)
#define CN23XX_DPI_DMA_CTL_MASK \
(CN23XX_DPI_DMA_COMMIT_MODE | \
CN23XX_DPI_DMA_PKT_EN | \
CN23XX_DPI_DMA_O_ES | \
CN23XX_DPI_DMA_O_MODE)
/*############################ RST #########################*/
#define CN23XX_RST_BOOT 0x0001180006001600ULL
#define CN23XX_RST_SOFT_RST 0x0001180006001680ULL
#define CN23XX_LMC0_RESET_CTL 0x0001180088000180ULL
#define CN23XX_LMC0_RESET_CTL_DDR3RST_MASK 0x0000000000000001ULL
#endif
......@@ -338,7 +338,7 @@ void lio_cn6xxx_setup_oq_regs(struct octeon_device *oct, u32 oq_no)
octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB, intr);
}
void lio_cn6xxx_enable_io_queues(struct octeon_device *oct)
int lio_cn6xxx_enable_io_queues(struct octeon_device *oct)
{
u32 mask;
......@@ -353,6 +353,8 @@ void lio_cn6xxx_enable_io_queues(struct octeon_device *oct)
mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_OUT_ENB);
mask |= oct->io_qmask.oq;
octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, mask);
return 0;
}
void lio_cn6xxx_disable_io_queues(struct octeon_device *oct)
......@@ -418,36 +420,6 @@ void lio_cn6xxx_disable_io_queues(struct octeon_device *oct)
octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT, d32);
}
void lio_cn6xxx_reinit_regs(struct octeon_device *oct)
{
int i;
for (i = 0; i < MAX_OCTEON_INSTR_QUEUES(oct); i++) {
if (!(oct->io_qmask.iq & (1ULL << i)))
continue;
oct->fn_list.setup_iq_regs(oct, i);
}
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
if (!(oct->io_qmask.oq & (1ULL << i)))
continue;
oct->fn_list.setup_oq_regs(oct, i);
}
oct->fn_list.setup_device_regs(oct);
oct->fn_list.enable_interrupt(oct->chip);
oct->fn_list.enable_io_queues(oct);
/* for (i = 0; i < oct->num_oqs; i++) { */
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
if (!(oct->io_qmask.oq & (1ULL << i)))
continue;
writel(oct->droq[i]->max_count, oct->droq[i]->pkts_credit_reg);
}
}
void
lio_cn6xxx_bar1_idx_setup(struct octeon_device *oct,
u64 core_addr,
......@@ -507,18 +479,20 @@ lio_cn6xxx_update_read_index(struct octeon_instr_queue *iq)
return new_idx;
}
void lio_cn6xxx_enable_interrupt(void *chip)
void lio_cn6xxx_enable_interrupt(struct octeon_device *oct,
u8 unused __attribute__((unused)))
{
struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)chip;
struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
u64 mask = cn6xxx->intr_mask64 | CN6XXX_INTR_DMA0_FORCE;
/* Enable Interrupt */
writeq(mask, cn6xxx->intr_enb_reg64);
}
void lio_cn6xxx_disable_interrupt(void *chip)
void lio_cn6xxx_disable_interrupt(struct octeon_device *oct,
u8 unused __attribute__((unused)))
{
struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)chip;
struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
/* Disable Interrupts */
writeq(0, cn6xxx->intr_enb_reg64);
......@@ -714,7 +688,6 @@ int lio_setup_cn66xx_octeon_device(struct octeon_device *oct)
oct->fn_list.soft_reset = lio_cn6xxx_soft_reset;
oct->fn_list.setup_device_regs = lio_cn6xxx_setup_device_regs;
oct->fn_list.reinit_regs = lio_cn6xxx_reinit_regs;
oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index;
oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup;
......
......@@ -80,18 +80,17 @@ void lio_cn6xxx_setup_global_input_regs(struct octeon_device *oct);
void lio_cn6xxx_setup_global_output_regs(struct octeon_device *oct);
void lio_cn6xxx_setup_iq_regs(struct octeon_device *oct, u32 iq_no);
void lio_cn6xxx_setup_oq_regs(struct octeon_device *oct, u32 oq_no);
void lio_cn6xxx_enable_io_queues(struct octeon_device *oct);
int lio_cn6xxx_enable_io_queues(struct octeon_device *oct);
void lio_cn6xxx_disable_io_queues(struct octeon_device *oct);
irqreturn_t lio_cn6xxx_process_interrupt_regs(void *dev);
void lio_cn6xxx_reinit_regs(struct octeon_device *oct);
void lio_cn6xxx_bar1_idx_setup(struct octeon_device *oct, u64 core_addr,
u32 idx, int valid);
void lio_cn6xxx_bar1_idx_write(struct octeon_device *oct, u32 idx, u32 mask);
u32 lio_cn6xxx_bar1_idx_read(struct octeon_device *oct, u32 idx);
u32
lio_cn6xxx_update_read_index(struct octeon_instr_queue *iq);
void lio_cn6xxx_enable_interrupt(void *chip);
void lio_cn6xxx_disable_interrupt(void *chip);
void lio_cn6xxx_enable_interrupt(struct octeon_device *oct, u8 unused);
void lio_cn6xxx_disable_interrupt(struct octeon_device *oct, u8 unused);
void cn6xxx_get_pcie_qlmport(struct octeon_device *oct);
void lio_cn6xxx_setup_reg_address(struct octeon_device *oct, void *chip,
struct octeon_reg_list *reg_list);
......
......@@ -148,7 +148,6 @@ int lio_setup_cn68xx_octeon_device(struct octeon_device *oct)
oct->fn_list.process_interrupt_regs = lio_cn6xxx_process_interrupt_regs;
oct->fn_list.soft_reset = lio_cn68xx_soft_reset;
oct->fn_list.setup_device_regs = lio_cn68xx_setup_device_regs;
oct->fn_list.reinit_regs = lio_cn6xxx_reinit_regs;
oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index;
oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup;
......
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2015 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
#include <linux/pci.h>
#include <linux/if_vlan.h>
#include "liquidio_common.h"
#include "octeon_droq.h"
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
#include "octeon_nic.h"
#include "octeon_main.h"
#include "octeon_network.h"
int liquidio_set_feature(struct net_device *netdev, int cmd, u16 param1)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = cmd;
nctrl.ncmd.s.param1 = param1;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Feature change failed in core (ret: 0x%x)\n",
ret);
}
return ret;
}
void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl,
unsigned int bytes_compl)
{
struct netdev_queue *netdev_queue = txq;
netdev_tx_completed_queue(netdev_queue, pkts_compl, bytes_compl);
}
void octeon_update_tx_completion_counters(void *buf, int reqtype,
unsigned int *pkts_compl,
unsigned int *bytes_compl)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb = NULL;
struct octeon_soft_command *sc;
switch (reqtype) {
case REQTYPE_NORESP_NET:
case REQTYPE_NORESP_NET_SG:
finfo = buf;
skb = finfo->skb;
break;
case REQTYPE_RESP_NET_SG:
case REQTYPE_RESP_NET:
sc = buf;
skb = sc->callback_arg;
break;
default:
return;
}
(*pkts_compl)++;
/*TODO, Use some other pound define to suggest
* the fact that iqs are not tied to netdevs
* and can take traffic from different netdevs
* hence bql reporting is done per packet
* than in bulk. Usage of NO_NAPI in txq completion is
* a little confusing
*/
*bytes_compl += skb->len;
}
void octeon_report_sent_bytes_to_bql(void *buf, int reqtype)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct octeon_soft_command *sc;
struct netdev_queue *txq;
switch (reqtype) {
case REQTYPE_NORESP_NET:
case REQTYPE_NORESP_NET_SG:
finfo = buf;
skb = finfo->skb;
break;
case REQTYPE_RESP_NET_SG:
case REQTYPE_RESP_NET:
sc = buf;
skb = sc->callback_arg;
break;
default:
return;
}
txq = netdev_get_tx_queue(skb->dev, skb_get_queue_mapping(skb));
netdev_tx_sent_queue(txq, skb->len);
}
void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr)
{
struct octnic_ctrl_pkt *nctrl = (struct octnic_ctrl_pkt *)nctrl_ptr;
struct net_device *netdev = (struct net_device *)nctrl->netpndev;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
u8 *mac;
switch (nctrl->ncmd.s.cmd) {
case OCTNET_CMD_CHANGE_DEVFLAGS:
case OCTNET_CMD_SET_MULTI_LIST:
break;
case OCTNET_CMD_CHANGE_MACADDR:
mac = ((u8 *)&nctrl->udd[0]) + 2;
netif_info(lio, probe, lio->netdev,
"MACAddr changed to %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
mac[0], mac[1],
mac[2], mac[3],
mac[4], mac[5]);
break;
case OCTNET_CMD_CHANGE_MTU:
/* If command is successful, change the MTU. */
netif_info(lio, probe, lio->netdev, "MTU Changed from %d to %d\n",
netdev->mtu, nctrl->ncmd.s.param1);
dev_info(&oct->pci_dev->dev, "%s MTU Changed from %d to %d\n",
netdev->name, netdev->mtu,
nctrl->ncmd.s.param1);
rtnl_lock();
netdev->mtu = nctrl->ncmd.s.param1;
call_netdevice_notifiers(NETDEV_CHANGEMTU, netdev);
rtnl_unlock();
break;
case OCTNET_CMD_GPIO_ACCESS:
netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n");
break;
case OCTNET_CMD_LRO_ENABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
break;
case OCTNET_CMD_LRO_DISABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
netdev->name);
break;
case OCTNET_CMD_VERBOSE_ENABLE:
dev_info(&oct->pci_dev->dev, "%s Firmware debug enabled\n",
netdev->name);
break;
case OCTNET_CMD_VERBOSE_DISABLE:
dev_info(&oct->pci_dev->dev, "%s Firmware debug disabled\n",
netdev->name);
break;
case OCTNET_CMD_ENABLE_VLAN_FILTER:
dev_info(&oct->pci_dev->dev, "%s VLAN filter enabled\n",
netdev->name);
break;
case OCTNET_CMD_ADD_VLAN_FILTER:
dev_info(&oct->pci_dev->dev, "%s VLAN filter %d added\n",
netdev->name, nctrl->ncmd.s.param1);
break;
case OCTNET_CMD_DEL_VLAN_FILTER:
dev_info(&oct->pci_dev->dev, "%s VLAN filter %d removed\n",
netdev->name, nctrl->ncmd.s.param1);
break;
case OCTNET_CMD_SET_SETTINGS:
dev_info(&oct->pci_dev->dev, "%s settings changed\n",
netdev->name);
break;
/* Case to handle "OCTNET_CMD_TNL_RX_CSUM_CTL"
* Command passed by NIC driver
*/
case OCTNET_CMD_TNL_RX_CSUM_CTL:
if (nctrl->ncmd.s.param1 == OCTNET_CMD_RXCSUM_ENABLE) {
netif_info(lio, probe, lio->netdev,
"RX Checksum Offload Enabled\n");
} else if (nctrl->ncmd.s.param1 ==
OCTNET_CMD_RXCSUM_DISABLE) {
netif_info(lio, probe, lio->netdev,
"RX Checksum Offload Disabled\n");
}
break;
/* Case to handle "OCTNET_CMD_TNL_TX_CSUM_CTL"
* Command passed by NIC driver
*/
case OCTNET_CMD_TNL_TX_CSUM_CTL:
if (nctrl->ncmd.s.param1 == OCTNET_CMD_TXCSUM_ENABLE) {
netif_info(lio, probe, lio->netdev,
"TX Checksum Offload Enabled\n");
} else if (nctrl->ncmd.s.param1 ==
OCTNET_CMD_TXCSUM_DISABLE) {
netif_info(lio, probe, lio->netdev,
"TX Checksum Offload Disabled\n");
}
break;
/* Case to handle "OCTNET_CMD_VXLAN_PORT_CONFIG"
* Command passed by NIC driver
*/
case OCTNET_CMD_VXLAN_PORT_CONFIG:
if (nctrl->ncmd.s.more == OCTNET_CMD_VXLAN_PORT_ADD) {
netif_info(lio, probe, lio->netdev,
"VxLAN Destination UDP PORT:%d ADDED\n",
nctrl->ncmd.s.param1);
} else if (nctrl->ncmd.s.more ==
OCTNET_CMD_VXLAN_PORT_DEL) {
netif_info(lio, probe, lio->netdev,
"VxLAN Destination UDP PORT:%d DELETED\n",
nctrl->ncmd.s.param1);
}
break;
case OCTNET_CMD_SET_FLOW_CTL:
netif_info(lio, probe, lio->netdev, "Set RX/TX flow control parameters\n");
break;
default:
dev_err(&oct->pci_dev->dev, "%s Unknown cmd %d\n", __func__,
nctrl->ncmd.s.cmd);
}
}
......@@ -290,14 +290,12 @@ lio_get_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom,
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct_dev = lio->oct_dev;
struct octeon_board_info *board_info;
int len;
if (eeprom->offset != 0)
if (eeprom->offset)
return -EINVAL;
eeprom->magic = oct_dev->pci_dev->vendor;
board_info = (struct octeon_board_info *)(&oct_dev->boardinfo);
len =
sprintf((char *)bytes,
"boardname:%s serialnum:%s maj:%lld min:%lld\n",
board_info->name, board_info->serial_number,
......@@ -1320,8 +1318,8 @@ oct_cfg_rx_intrcnt(struct lio *lio, struct ethtool_coalesce *intr_coal)
return 0;
}
static int oct_cfg_rx_intrtime(struct lio *lio, struct ethtool_coalesce
*intr_coal)
static int oct_cfg_rx_intrtime(struct lio *lio,
struct ethtool_coalesce *intr_coal)
{
struct octeon_device *oct = lio->oct_dev;
u32 time_threshold, rx_coalesce_usecs;
......
......@@ -21,8 +21,6 @@
**********************************************************************/
#include <linux/version.h>
#include <linux/pci.h>
#include <linux/net_tstamp.h>
#include <linux/if_vlan.h>
#include <linux/firmware.h>
#include <linux/ptp_clock_kernel.h>
#include <net/vxlan.h>
......@@ -37,6 +35,7 @@
#include "cn66xx_regs.h"
#include "cn66xx_device.h"
#include "cn68xx_device.h"
#include "cn23xx_pf_device.h"
#include "liquidio_image.h"
MODULE_AUTHOR("Cavium Networks, <support@cavium.com>");
......@@ -52,11 +51,6 @@ module_param(ddr_timeout, int, 0644);
MODULE_PARM_DESC(ddr_timeout,
"Number of milliseconds to wait for DDR initialization. 0 waits for ddr_timeout to be set to non-zero value before starting to check");
static u32 console_bitmask;
module_param(console_bitmask, int, 0644);
MODULE_PARM_DESC(console_bitmask,
"Bitmask indicating which consoles have debug output redirected to syslog.");
#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
#define INCR_INSTRQUEUE_PKT_COUNT(octeon_dev_ptr, iq_no, field, count) \
......@@ -139,7 +133,8 @@ union tx_info {
#define OCTNIC_MAX_SG (MAX_SKB_FRAGS)
#define OCTNIC_GSO_MAX_HEADER_SIZE 128
#define OCTNIC_GSO_MAX_SIZE (GSO_MAX_SIZE - OCTNIC_GSO_MAX_HEADER_SIZE)
#define OCTNIC_GSO_MAX_SIZE \
(CN23XX_DEFAULT_INPUT_JABBER - OCTNIC_GSO_MAX_HEADER_SIZE)
/** Structure of a node in list of gather components maintained by
* NIC driver for each network device.
......@@ -162,27 +157,6 @@ struct octnic_gather {
u64 sg_dma_ptr;
};
/** This structure is used by NIC driver to store information required
* to free the sk_buff when the packet has been fetched by Octeon.
* Bytes offset below assume worst-case of a 64-bit system.
*/
struct octnet_buf_free_info {
/** Bytes 1-8. Pointer to network device private structure. */
struct lio *lio;
/** Bytes 9-16. Pointer to sk_buff. */
struct sk_buff *skb;
/** Bytes 17-24. Pointer to gather list. */
struct octnic_gather *g;
/** Bytes 25-32. Physical address of skb->data or gather list. */
u64 dptr;
/** Bytes 33-47. Piggybacked soft command, if any */
struct octeon_soft_command *sc;
};
struct handshake {
struct completion init;
struct completion started;
......@@ -198,6 +172,7 @@ struct octeon_device_priv {
};
static int octeon_device_init(struct octeon_device *);
static int liquidio_stop(struct net_device *netdev);
static void liquidio_remove(struct pci_dev *pdev);
static int liquidio_probe(struct pci_dev *pdev,
const struct pci_device_id *ent);
......@@ -219,6 +194,20 @@ static void octeon_droq_bh(unsigned long pdev)
continue;
reschedule |= octeon_droq_process_packets(oct, oct->droq[q_no],
MAX_PACKET_BUDGET);
lio_enable_irq(oct->droq[q_no], NULL);
if (OCTEON_CN23XX_PF(oct) && oct->msix_on) {
/* set time and cnt interrupt thresholds for this DROQ
* for NAPI
*/
int adjusted_q_no = q_no + oct->sriov_info.pf_srn;
octeon_write_csr64(
oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(adjusted_q_no),
0x5700000040ULL);
octeon_write_csr64(
oct, CN23XX_SLI_OQ_PKTS_SENT(adjusted_q_no), 0);
}
}
if (reschedule)
......@@ -252,76 +241,6 @@ static int lio_wait_for_oq_pkts(struct octeon_device *oct)
return pkt_cnt;
}
void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl,
unsigned int bytes_compl)
{
struct netdev_queue *netdev_queue = txq;
netdev_tx_completed_queue(netdev_queue, pkts_compl, bytes_compl);
}
void octeon_update_tx_completion_counters(void *buf, int reqtype,
unsigned int *pkts_compl,
unsigned int *bytes_compl)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb = NULL;
struct octeon_soft_command *sc;
switch (reqtype) {
case REQTYPE_NORESP_NET:
case REQTYPE_NORESP_NET_SG:
finfo = buf;
skb = finfo->skb;
break;
case REQTYPE_RESP_NET_SG:
case REQTYPE_RESP_NET:
sc = buf;
skb = sc->callback_arg;
break;
default:
return;
}
(*pkts_compl)++;
*bytes_compl += skb->len;
}
void octeon_report_sent_bytes_to_bql(void *buf, int reqtype)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct octeon_soft_command *sc;
struct netdev_queue *txq;
switch (reqtype) {
case REQTYPE_NORESP_NET:
case REQTYPE_NORESP_NET_SG:
finfo = buf;
skb = finfo->skb;
break;
case REQTYPE_RESP_NET_SG:
case REQTYPE_RESP_NET:
sc = buf;
skb = sc->callback_arg;
break;
default:
return;
}
txq = netdev_get_tx_queue(skb->dev, skb_get_queue_mapping(skb));
netdev_tx_sent_queue(txq, skb->len);
}
int octeon_console_debug_enabled(u32 console)
{
return (console_bitmask >> (console)) & 0x1;
}
/**
* \brief Forces all IO queues off on a given device
* @param oct Pointer to Octeon device
......@@ -441,7 +360,7 @@ static void stop_pci_io(struct octeon_device *oct)
pci_disable_device(oct->pci_dev);
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct->chip);
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
pcierror_quiesce_device(oct);
......@@ -570,6 +489,9 @@ static const struct pci_device_id liquidio_pci_tbl[] = {
{ /* 66xx */
PCI_VENDOR_ID_CAVIUM, 0x92, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{ /* 23xx pf */
PCI_VENDOR_ID_CAVIUM, 0x9702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{
0, 0, 0, 0, 0, 0, 0
}
......@@ -587,7 +509,6 @@ static struct pci_driver liquidio_pci_driver = {
.suspend = liquidio_suspend,
.resume = liquidio_resume,
#endif
};
/**
......@@ -1002,6 +923,27 @@ static void update_txq_status(struct octeon_device *oct, int iq_num)
}
}
static
int liquidio_schedule_msix_droq_pkt_handler(struct octeon_droq *droq, u64 ret)
{
struct octeon_device *oct = droq->oct_dev;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
if (droq->ops.poll_mode) {
droq->ops.napi_fn(droq);
} else {
if (ret & MSIX_PO_INT) {
tasklet_schedule(&oct_priv->droq_tasklet);
return 1;
}
/* this will be flushed periodically by check iq db */
if (ret & MSIX_PI_INT)
return 0;
}
return 0;
}
/**
* \brief Droq packet processor sceduler
* @param oct octeon device
......@@ -1032,19 +974,36 @@ void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct)
}
}
static irqreturn_t
liquidio_msix_intr_handler(int irq __attribute__((unused)), void *dev)
{
u64 ret;
struct octeon_ioq_vector *ioq_vector = (struct octeon_ioq_vector *)dev;
struct octeon_device *oct = ioq_vector->oct_dev;
struct octeon_droq *droq = oct->droq[ioq_vector->droq_index];
ret = oct->fn_list.msix_interrupt_handler(ioq_vector);
if ((ret & MSIX_PO_INT) || (ret & MSIX_PI_INT))
liquidio_schedule_msix_droq_pkt_handler(droq, ret);
return IRQ_HANDLED;
}
/**
* \brief Interrupt handler for octeon
* @param irq unused
* @param dev octeon device
*/
static
irqreturn_t liquidio_intr_handler(int irq __attribute__((unused)), void *dev)
irqreturn_t liquidio_legacy_intr_handler(int irq __attribute__((unused)),
void *dev)
{
struct octeon_device *oct = (struct octeon_device *)dev;
irqreturn_t ret;
/* Disable our interrupts for the duration of ISR */
oct->fn_list.disable_interrupt(oct->chip);
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
ret = oct->fn_list.process_interrupt_regs(oct);
......@@ -1053,7 +1012,7 @@ irqreturn_t liquidio_intr_handler(int irq __attribute__((unused)), void *dev)
/* Re-enable our interrupts */
if (!(atomic_read(&oct->status) == OCT_DEV_IN_RESET))
oct->fn_list.enable_interrupt(oct->chip);
oct->fn_list.enable_interrupt(oct, OCTEON_ALL_INTR);
return ret;
}
......@@ -1067,7 +1026,92 @@ irqreturn_t liquidio_intr_handler(int irq __attribute__((unused)), void *dev)
static int octeon_setup_interrupt(struct octeon_device *oct)
{
int irqret, err;
struct msix_entry *msix_entries;
int i;
int num_ioq_vectors;
int num_alloc_ioq_vectors;
if (OCTEON_CN23XX_PF(oct) && oct->msix_on) {
oct->num_msix_irqs = oct->sriov_info.num_pf_rings;
/* one non ioq interrupt for handling sli_mac_pf_int_sum */
oct->num_msix_irqs += 1;
oct->msix_entries = kcalloc(
oct->num_msix_irqs, sizeof(struct msix_entry), GFP_KERNEL);
if (!oct->msix_entries)
return 1;
msix_entries = (struct msix_entry *)oct->msix_entries;
/*Assumption is that pf msix vectors start from pf srn to pf to
* trs and not from 0. if not change this code
*/
for (i = 0; i < oct->num_msix_irqs - 1; i++)
msix_entries[i].entry = oct->sriov_info.pf_srn + i;
msix_entries[oct->num_msix_irqs - 1].entry =
oct->sriov_info.trs;
num_alloc_ioq_vectors = pci_enable_msix_range(
oct->pci_dev, msix_entries,
oct->num_msix_irqs,
oct->num_msix_irqs);
if (num_alloc_ioq_vectors < 0) {
dev_err(&oct->pci_dev->dev, "unable to Allocate MSI-X interrupts\n");
kfree(oct->msix_entries);
oct->msix_entries = NULL;
return 1;
}
dev_dbg(&oct->pci_dev->dev, "OCTEON: Enough MSI-X interrupts are allocated...\n");
num_ioq_vectors = oct->num_msix_irqs;
/** For PF, there is one non-ioq interrupt handler */
num_ioq_vectors -= 1;
irqret = request_irq(msix_entries[num_ioq_vectors].vector,
liquidio_legacy_intr_handler, 0, "octeon",
oct);
if (irqret) {
dev_err(&oct->pci_dev->dev,
"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
irqret);
pci_disable_msix(oct->pci_dev);
kfree(oct->msix_entries);
oct->msix_entries = NULL;
return 1;
}
for (i = 0; i < num_ioq_vectors; i++) {
irqret = request_irq(msix_entries[i].vector,
liquidio_msix_intr_handler, 0,
"octeon", &oct->ioq_vector[i]);
if (irqret) {
dev_err(&oct->pci_dev->dev,
"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
irqret);
/** Freeing the non-ioq irq vector here . */
free_irq(msix_entries[num_ioq_vectors].vector,
oct);
while (i) {
i--;
/** clearing affinity mask. */
irq_set_affinity_hint(
msix_entries[i].vector, NULL);
free_irq(msix_entries[i].vector,
&oct->ioq_vector[i]);
}
pci_disable_msix(oct->pci_dev);
kfree(oct->msix_entries);
oct->msix_entries = NULL;
return 1;
}
oct->ioq_vector[i].vector = msix_entries[i].vector;
/* assign the cpu mask for this msix interrupt vector */
irq_set_affinity_hint(
msix_entries[i].vector,
(&oct->ioq_vector[i].affinity_mask));
}
dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: MSI-X enabled\n",
oct->octeon_id);
} else {
err = pci_enable_msi(oct->pci_dev);
if (err)
dev_warn(&oct->pci_dev->dev, "Reverting to legacy interrupts. Error: %d\n",
......@@ -1075,8 +1119,9 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
else
oct->flags |= LIO_FLAG_MSI_ENABLED;
irqret = request_irq(oct->pci_dev->irq, liquidio_intr_handler,
IRQF_SHARED, "octeon", oct);
irqret = request_irq(oct->pci_dev->irq,
liquidio_legacy_intr_handler, IRQF_SHARED,
"octeon", oct);
if (irqret) {
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
......@@ -1084,7 +1129,7 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
irqret);
return 1;
}
}
return 0;
}
......@@ -1107,6 +1152,9 @@ liquidio_probe(struct pci_dev *pdev,
return -ENOMEM;
}
if (pdev->device == OCTEON_CN23XX_PF_VID)
oct_dev->msix_on = LIO_FLAG_MSIX_ENABLED;
dev_info(&pdev->dev, "Initializing device %x:%x.\n",
(u32)pdev->vendor, (u32)pdev->device);
......@@ -1146,6 +1194,7 @@ liquidio_probe(struct pci_dev *pdev,
static void octeon_destroy_resources(struct octeon_device *oct)
{
int i;
struct msix_entry *msix_entries;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
......@@ -1190,21 +1239,40 @@ static void octeon_destroy_resources(struct octeon_device *oct)
dev_err(&oct->pci_dev->dev, "OQ had pending packets\n");
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct->chip);
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
if (oct->msix_on) {
msix_entries = (struct msix_entry *)oct->msix_entries;
for (i = 0; i < oct->num_msix_irqs - 1; i++) {
/* clear the affinity_cpumask */
irq_set_affinity_hint(msix_entries[i].vector,
NULL);
free_irq(msix_entries[i].vector,
&oct->ioq_vector[i]);
}
/* non-iov vector's argument is oct struct */
free_irq(msix_entries[i].vector, oct);
pci_disable_msix(oct->pci_dev);
kfree(oct->msix_entries);
oct->msix_entries = NULL;
} else {
/* Release the interrupt line */
free_irq(oct->pci_dev->irq, oct);
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
}
if (OCTEON_CN23XX_PF(oct))
octeon_free_ioq_vector(oct);
/* fallthrough */
case OCT_DEV_IN_RESET:
case OCT_DEV_DROQ_INIT_DONE:
/*atomic_set(&oct->status, OCT_DEV_DROQ_INIT_DONE);*/
mdelay(100);
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
if (!(oct->io_qmask.oq & (1ULL << i)))
if (!(oct->io_qmask.oq & BIT_ULL(i)))
continue;
octeon_delete_droq(oct, i);
}
......@@ -1244,8 +1312,8 @@ static void octeon_destroy_resources(struct octeon_device *oct)
/* fallthrough */
case OCT_DEV_PCI_MAP_DONE:
/* Soft reset the octeon device before exiting */
if ((!OCTEON_CN23XX_PF(oct)) || !oct->octeon_id)
oct->fn_list.soft_reset(oct);
octeon_unmap_pci_barx(oct, 0);
......@@ -1417,6 +1485,12 @@ static int octeon_chip_specific_setup(struct octeon_device *oct)
s = "CN66XX";
break;
case OCTEON_CN23XX_PCIID_PF:
oct->chip_id = OCTEON_CN23XX_PF_VID;
ret = setup_cn23xx_octeon_pf_device(oct);
s = "CN23XX";
break;
default:
s = "?";
dev_err(&oct->pci_dev->dev, "Unknown device found (dev_id: %x)\n",
......@@ -2173,17 +2247,15 @@ static inline int setup_io_queues(struct octeon_device *octeon_dev,
lio->ifidx), NULL);
if (retval) {
dev_err(&octeon_dev->pci_dev->dev,
" %s : Runtime DROQ(RxQ) creation failed.\n",
"%s : Runtime DROQ(RxQ) creation failed.\n",
__func__);
return 1;
}
droq = octeon_dev->droq[q_no];
napi = &droq->napi;
dev_dbg(&octeon_dev->pci_dev->dev,
"netif_napi_add netdev:%llx oct:%llx\n",
(u64)netdev,
(u64)octeon_dev);
dev_dbg(&octeon_dev->pci_dev->dev, "netif_napi_add netdev:%llx oct:%llx pf_num:%d\n",
(u64)netdev, (u64)octeon_dev, octeon_dev->pf_num);
netif_napi_add(netdev, napi, liquidio_napi_poll, 64);
/* designate a CPU for this droq */
......@@ -2235,7 +2307,7 @@ static void octnet_poll_check_txq_status(struct work_struct *work)
* \brief Sets up the txq poll check
* @param netdev network device
*/
static inline void setup_tx_poll_fn(struct net_device *netdev)
static inline int setup_tx_poll_fn(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
......@@ -2244,21 +2316,24 @@ static inline void setup_tx_poll_fn(struct net_device *netdev)
WQ_MEM_RECLAIM, 0);
if (!lio->txq_status_wq.wq) {
dev_err(&oct->pci_dev->dev, "unable to create cavium txq status wq\n");
return;
return -1;
}
INIT_DELAYED_WORK(&lio->txq_status_wq.wk.work,
octnet_poll_check_txq_status);
lio->txq_status_wq.wk.ctxptr = lio;
queue_delayed_work(lio->txq_status_wq.wq,
&lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
return 0;
}
static inline void cleanup_tx_poll_fn(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (lio->txq_status_wq.wq) {
cancel_delayed_work_sync(&lio->txq_status_wq.wk.work);
destroy_workqueue(lio->txq_status_wq.wq);
}
}
/**
......@@ -2282,7 +2357,14 @@ static int liquidio_open(struct net_device *netdev)
ifstate_set(lio, LIO_IFSTATE_RUNNING);
setup_tx_poll_fn(netdev);
if (OCTEON_CN23XX_PF(oct)) {
if (!oct->msix_on)
if (setup_tx_poll_fn(netdev))
return -1;
} else {
if (setup_tx_poll_fn(netdev))
return -1;
}
start_txq(netdev);
......@@ -2328,7 +2410,12 @@ static int liquidio_stop(struct net_device *netdev)
/* Now it should be safe to tell Octeon that nic interface is down. */
send_rx_ctrl_cmd(lio, 0);
if (OCTEON_CN23XX_PF(oct)) {
if (!oct->msix_on)
cleanup_tx_poll_fn(netdev);
} else {
cleanup_tx_poll_fn(netdev);
}
if (lio->ptp_clock) {
ptp_clock_unregister(lio->ptp_clock);
......@@ -2340,143 +2427,6 @@ static int liquidio_stop(struct net_device *netdev)
return 0;
}
void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr)
{
struct octnic_ctrl_pkt *nctrl = (struct octnic_ctrl_pkt *)nctrl_ptr;
struct net_device *netdev = (struct net_device *)nctrl->netpndev;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
u8 *mac;
switch (nctrl->ncmd.s.cmd) {
case OCTNET_CMD_CHANGE_DEVFLAGS:
case OCTNET_CMD_SET_MULTI_LIST:
break;
case OCTNET_CMD_CHANGE_MACADDR:
mac = ((u8 *)&nctrl->udd[0]) + 2;
netif_info(lio, probe, lio->netdev,
"%s %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
"MACAddr changed to", mac[0], mac[1],
mac[2], mac[3], mac[4], mac[5]);
break;
case OCTNET_CMD_CHANGE_MTU:
/* If command is successful, change the MTU. */
netif_info(lio, probe, lio->netdev, " MTU Changed from %d to %d\n",
netdev->mtu, nctrl->ncmd.s.param1);
dev_info(&oct->pci_dev->dev, "%s MTU Changed from %d to %d\n",
netdev->name, netdev->mtu,
nctrl->ncmd.s.param1);
rtnl_lock();
netdev->mtu = nctrl->ncmd.s.param1;
call_netdevice_notifiers(NETDEV_CHANGEMTU, netdev);
rtnl_unlock();
break;
case OCTNET_CMD_GPIO_ACCESS:
netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n");
break;
case OCTNET_CMD_LRO_ENABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
break;
case OCTNET_CMD_LRO_DISABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
netdev->name);
break;
case OCTNET_CMD_VERBOSE_ENABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
break;
case OCTNET_CMD_VERBOSE_DISABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
netdev->name);
break;
case OCTNET_CMD_ENABLE_VLAN_FILTER:
dev_info(&oct->pci_dev->dev, "%s VLAN filter enabled\n",
netdev->name);
break;
case OCTNET_CMD_ADD_VLAN_FILTER:
dev_info(&oct->pci_dev->dev, "%s VLAN filter %d added\n",
netdev->name, nctrl->ncmd.s.param1);
break;
case OCTNET_CMD_DEL_VLAN_FILTER:
dev_info(&oct->pci_dev->dev, "%s VLAN filter %d removed\n",
netdev->name, nctrl->ncmd.s.param1);
break;
case OCTNET_CMD_SET_SETTINGS:
dev_info(&oct->pci_dev->dev, "%s settings changed\n",
netdev->name);
break;
/* Case to handle "OCTNET_CMD_TNL_RX_CSUM_CTL"
* Command passed by NIC driver
*/
case OCTNET_CMD_TNL_RX_CSUM_CTL:
if (nctrl->ncmd.s.param1 == OCTNET_CMD_RXCSUM_ENABLE) {
netif_info(lio, probe, lio->netdev,
"%s RX Checksum Offload Enabled\n",
netdev->name);
} else if (nctrl->ncmd.s.param1 ==
OCTNET_CMD_RXCSUM_DISABLE) {
netif_info(lio, probe, lio->netdev,
"%s RX Checksum Offload Disabled\n",
netdev->name);
}
break;
/* Case to handle "OCTNET_CMD_TNL_TX_CSUM_CTL"
* Command passed by NIC driver
*/
case OCTNET_CMD_TNL_TX_CSUM_CTL:
if (nctrl->ncmd.s.param1 == OCTNET_CMD_TXCSUM_ENABLE) {
netif_info(lio, probe, lio->netdev,
"%s TX Checksum Offload Enabled\n",
netdev->name);
} else if (nctrl->ncmd.s.param1 ==
OCTNET_CMD_TXCSUM_DISABLE) {
netif_info(lio, probe, lio->netdev,
"%s TX Checksum Offload Disabled\n",
netdev->name);
}
break;
/* Case to handle "OCTNET_CMD_VXLAN_PORT_CONFIG"
* Command passed by NIC driver
*/
case OCTNET_CMD_VXLAN_PORT_CONFIG:
if (nctrl->ncmd.s.more == OCTNET_CMD_VXLAN_PORT_ADD) {
netif_info(lio, probe, lio->netdev,
"%s VxLAN Destination UDP PORT:%d ADDED\n",
netdev->name,
nctrl->ncmd.s.param1);
} else if (nctrl->ncmd.s.more ==
OCTNET_CMD_VXLAN_PORT_DEL) {
netif_info(lio, probe, lio->netdev,
"%s VxLAN Destination UDP PORT:%d DELETED\n",
netdev->name,
nctrl->ncmd.s.param1);
}
break;
case OCTNET_CMD_SET_FLOW_CTL:
netif_info(lio, probe, lio->netdev, "Set RX/TX flow control parameters\n");
break;
default:
dev_err(&oct->pci_dev->dev, "%s Unknown cmd %d\n", __func__,
nctrl->ncmd.s.cmd);
}
}
/**
* \brief Converts a mask based on net device flags
* @param netdev network device
......@@ -2817,8 +2767,7 @@ static void handle_timestamp(struct octeon_device *oct,
*/
static inline int send_nic_timestamp_pkt(struct octeon_device *oct,
struct octnic_data_pkt *ndata,
struct octnet_buf_free_info *finfo,
int xmit_more)
struct octnet_buf_free_info *finfo)
{
int retval;
struct octeon_soft_command *sc;
......@@ -2848,7 +2797,7 @@ static inline int send_nic_timestamp_pkt(struct octeon_device *oct,
len = (u32)((struct octeon_instr_ih2 *)(&sc->cmd.cmd2.ih2))->dlengsz;
ring_doorbell = !xmit_more;
ring_doorbell = 1;
retval = octeon_send_command(oct, sc->iq_no, ring_doorbell, &sc->cmd,
sc, len, ndata->reqtype);
......@@ -2881,7 +2830,7 @@ static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
union tx_info *tx_info;
int status = 0;
int q_idx = 0, iq_no = 0;
int xmit_more, j;
int j;
u64 dptr = 0;
u32 tag = 0;
......@@ -3077,12 +3026,10 @@ static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
irh->vlan = skb_vlan_tag_get(skb) & 0xfff;
}
xmit_more = skb->xmit_more;
if (unlikely(cmdsetup.s.timestamp))
status = send_nic_timestamp_pkt(oct, &ndata, finfo, xmit_more);
status = send_nic_timestamp_pkt(oct, &ndata, finfo);
else
status = octnet_send_nic_data_pkt(oct, &ndata, xmit_more);
status = octnet_send_nic_data_pkt(oct, &ndata);
if (status == IQ_SEND_FAILED)
goto lio_xmit_failed;
......@@ -3249,31 +3196,6 @@ static int liquidio_vxlan_port_command(struct net_device *netdev, int command,
return ret;
}
int liquidio_set_feature(struct net_device *netdev, int cmd, u16 param1)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = cmd;
nctrl.ncmd.s.param1 = param1;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Feature change failed in core (ret: 0x%x)\n",
ret);
}
return ret;
}
/** \brief Net device fix features
* @param netdev pointer to network device
* @param request features requested
......@@ -3492,8 +3414,9 @@ static int setup_nic_devices(struct octeon_device *octeon_dev)
union oct_nic_if_cfg if_cfg;
unsigned int base_queue;
unsigned int gmx_port_id;
u32 resp_size, ctx_size;
u32 resp_size, ctx_size, data_size;
u32 ifidx_or_pfnum;
struct lio_version *vdata;
/* This is to handle link status changes */
octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
......@@ -3515,21 +3438,37 @@ static int setup_nic_devices(struct octeon_device *octeon_dev)
for (i = 0; i < octeon_dev->ifcount; i++) {
resp_size = sizeof(struct liquidio_if_cfg_resp);
ctx_size = sizeof(struct liquidio_if_cfg_context);
data_size = sizeof(struct lio_version);
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(octeon_dev, 0,
octeon_alloc_soft_command(octeon_dev, data_size,
resp_size, ctx_size);
resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
vdata = (struct lio_version *)sc->virtdptr;
*((u64 *)vdata) = 0;
vdata->major = cpu_to_be16(LIQUIDIO_BASE_MAJOR_VERSION);
vdata->minor = cpu_to_be16(LIQUIDIO_BASE_MINOR_VERSION);
vdata->micro = cpu_to_be16(LIQUIDIO_BASE_MICRO_VERSION);
num_iqueues =
CFG_GET_NUM_TXQS_NIC_IF(octeon_get_conf(octeon_dev), i);
num_oqueues =
CFG_GET_NUM_RXQS_NIC_IF(octeon_get_conf(octeon_dev), i);
base_queue =
CFG_GET_BASE_QUE_NIC_IF(octeon_get_conf(octeon_dev), i);
gmx_port_id =
CFG_GET_GMXID_NIC_IF(octeon_get_conf(octeon_dev), i);
if (OCTEON_CN23XX_PF(octeon_dev)) {
num_iqueues = octeon_dev->sriov_info.num_pf_rings;
num_oqueues = octeon_dev->sriov_info.num_pf_rings;
base_queue = octeon_dev->sriov_info.pf_srn;
gmx_port_id = octeon_dev->pf_num;
ifidx_or_pfnum = octeon_dev->pf_num;
} else {
num_iqueues = CFG_GET_NUM_TXQS_NIC_IF(
octeon_get_conf(octeon_dev), i);
num_oqueues = CFG_GET_NUM_RXQS_NIC_IF(
octeon_get_conf(octeon_dev), i);
base_queue = CFG_GET_BASE_QUE_NIC_IF(
octeon_get_conf(octeon_dev), i);
gmx_port_id = CFG_GET_GMXID_NIC_IF(
octeon_get_conf(octeon_dev), i);
ifidx_or_pfnum = i;
}
dev_dbg(&octeon_dev->pci_dev->dev,
"requesting config for interface %d, iqs %d, oqs %d\n",
......@@ -3633,12 +3572,16 @@ static int setup_nic_devices(struct octeon_device *octeon_dev)
lio->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
if (OCTEON_CN23XX_PF(octeon_dev) ||
OCTEON_CN6XXX(octeon_dev)) {
lio->dev_capability = NETIF_F_HIGHDMA
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_SG | NETIF_F_RXCSUM
| NETIF_F_GRO
| NETIF_F_TSO | NETIF_F_TSO6
| NETIF_F_LRO;
}
netif_set_gso_max_size(netdev, OCTNIC_GSO_MAX_SIZE);
/* Copy of transmit encapsulation capabilities:
......@@ -3880,6 +3823,7 @@ static void nic_starter(struct work_struct *work)
static int octeon_device_init(struct octeon_device *octeon_dev)
{
int j, ret;
int fw_loaded = 0;
char bootcmd[] = "\n";
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)octeon_dev->priv;
......@@ -3901,9 +3845,23 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
octeon_dev->app_mode = CVM_DRV_INVALID_APP;
if (OCTEON_CN23XX_PF(octeon_dev)) {
if (!cn23xx_fw_loaded(octeon_dev)) {
fw_loaded = 0;
/* Do a soft reset of the Octeon device. */
if (octeon_dev->fn_list.soft_reset(octeon_dev))
return 1;
/* things might have changed */
if (!cn23xx_fw_loaded(octeon_dev))
fw_loaded = 0;
else
fw_loaded = 1;
} else {
fw_loaded = 1;
}
} else if (octeon_dev->fn_list.soft_reset(octeon_dev)) {
return 1;
}
/* Initialize the dispatch mechanism used to push packets arriving on
* Octeon Output queues.
......@@ -3925,6 +3883,22 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
octeon_set_io_queues_off(octeon_dev);
if (OCTEON_CN23XX_PF(octeon_dev)) {
ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: Failed to configure device registers\n");
return ret;
}
}
/* Initialize soft command buffer pool
*/
if (octeon_setup_sc_buffer_pool(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
/* Setup the data structures that manage this Octeon's Input queues. */
if (octeon_setup_instr_queues(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev,
......@@ -3936,14 +3910,6 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
}
atomic_set(&octeon_dev->status, OCT_DEV_INSTR_QUEUE_INIT_DONE);
/* Initialize soft command buffer pool
*/
if (octeon_setup_sc_buffer_pool(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
/* Initialize lists to manage the requests of different types that
* arrive from user & kernel applications for this octeon device.
*/
......@@ -3963,9 +3929,16 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
atomic_set(&octeon_dev->status, OCT_DEV_DROQ_INIT_DONE);
/* The input and output queue registers were setup earlier (the queues
* were not enabled). Any additional registers that need to be
* programmed should be done now.
if (OCTEON_CN23XX_PF(octeon_dev)) {
if (octeon_allocate_ioq_vector(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: ioq vector allocation failed\n");
return 1;
}
} else {
/* The input and output queue registers were setup earlier (the
* queues were not enabled). Any additional registers
* that need to be programmed should be done now.
*/
ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
if (ret) {
......@@ -3973,6 +3946,7 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
"Failed to configure device registers\n");
return ret;
}
}
/* Initialize the tasklet that handles output queue packet processing.*/
dev_dbg(&octeon_dev->pci_dev->dev, "Initializing droq tasklet\n");
......@@ -3985,22 +3959,28 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
return 1;
/* Enable Octeon device interrupts */
octeon_dev->fn_list.enable_interrupt(octeon_dev->chip);
octeon_dev->fn_list.enable_interrupt(octeon_dev, OCTEON_ALL_INTR);
/* Enable the input and output queues for this Octeon device */
octeon_dev->fn_list.enable_io_queues(octeon_dev);
ret = octeon_dev->fn_list.enable_io_queues(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Failed to enable input/output queues");
return ret;
}
atomic_set(&octeon_dev->status, OCT_DEV_IO_QUEUES_DONE);
if ((!OCTEON_CN23XX_PF(octeon_dev)) || !fw_loaded) {
dev_dbg(&octeon_dev->pci_dev->dev, "Waiting for DDR initialization...\n");
if (ddr_timeout == 0)
dev_info(&octeon_dev->pci_dev->dev, "WAITING. Set ddr_timeout to non-zero value to proceed with initialization.\n");
if (!ddr_timeout) {
dev_info(&octeon_dev->pci_dev->dev,
"WAITING. Set ddr_timeout to non-zero value to proceed with initialization.\n");
}
schedule_timeout_uninterruptible(HZ * LIO_RESET_SECS);
/* Wait for the octeon to initialize DDR after the soft-reset. */
while (ddr_timeout == 0) {
/* Wait for the octeon to initialize DDR after the soft-reset.*/
while (!ddr_timeout) {
set_current_state(TASK_INTERRUPTIBLE);
if (schedule_timeout(HZ / 10)) {
/* user probably pressed Control-C */
......@@ -4015,7 +3995,7 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
return 1;
}
if (octeon_wait_for_bootloader(octeon_dev, 1000) != 0) {
if (octeon_wait_for_bootloader(octeon_dev, 1000)) {
dev_err(&octeon_dev->pci_dev->dev, "Board not responding\n");
return 1;
}
......@@ -4043,6 +4023,13 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
dev_err(&octeon_dev->pci_dev->dev, "Could not load firmware to board\n");
return 1;
}
/* set bit 1 of SLI_SCRATCH_1 to indicate that firmware is
* loaded
*/
if (OCTEON_CN23XX_PF(octeon_dev))
octeon_write_csr64(octeon_dev, CN23XX_SLI_SCRATCH1,
2ULL);
}
handshake[octeon_dev->octeon_id].init_ok = 1;
complete(&handshake[octeon_dev->octeon_id].init);
......@@ -4057,7 +4044,6 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
octeon_dev->droq[j]->pkts_credit_reg);
/* Packets can start arriving on the output queues from this point. */
return 0;
}
......
......@@ -30,10 +30,24 @@
#include "octeon_config.h"
#define LIQUIDIO_BASE_VERSION "1.4"
#define LIQUIDIO_MICRO_VERSION ".1"
#define LIQUIDIO_PACKAGE ""
#define LIQUIDIO_VERSION "1.4.1"
#define LIQUIDIO_BASE_MAJOR_VERSION 1
#define LIQUIDIO_BASE_MINOR_VERSION 4
#define LIQUIDIO_BASE_MICRO_VERSION 1
#define LIQUIDIO_BASE_VERSION __stringify(LIQUIDIO_BASE_MAJOR_VERSION) "." \
__stringify(LIQUIDIO_BASE_MINOR_VERSION)
#define LIQUIDIO_MICRO_VERSION "." __stringify(LIQUIDIO_BASE_MICRO_VERSION)
#define LIQUIDIO_VERSION LIQUIDIO_PACKAGE \
__stringify(LIQUIDIO_BASE_MAJOR_VERSION) "." \
__stringify(LIQUIDIO_BASE_MINOR_VERSION) \
"." __stringify(LIQUIDIO_BASE_MICRO_VERSION)
struct lio_version {
u16 major;
u16 minor;
u16 micro;
u16 reserved;
};
#define CONTROL_IQ 0
/** Tag types used by Octeon cores in its work. */
......@@ -832,7 +846,7 @@ struct oct_mdio_cmd {
/* intrmod: max. packets to trigger interrupt */
#define LIO_INTRMOD_RXMAXCNT_TRIGGER 384
/* intrmod: min. packets to trigger interrupt */
#define LIO_INTRMOD_RXMINCNT_TRIGGER 1
#define LIO_INTRMOD_RXMINCNT_TRIGGER 0
/* intrmod: max. time to trigger interrupt */
#define LIO_INTRMOD_RXMAXTMR_TRIGGER 128
/* 66xx:intrmod: min. time to trigger interrupt
......
......@@ -64,6 +64,34 @@
#define DEFAULT_NUM_NIC_PORTS_68XX 4
#define DEFAULT_NUM_NIC_PORTS_68XX_210NV 2
/* CN23xx IQ configuration macros */
#define CN23XX_MAX_RINGS_PER_PF_PASS_1_0 12
#define CN23XX_MAX_RINGS_PER_PF_PASS_1_1 32
#define CN23XX_MAX_RINGS_PER_PF 64
#define CN23XX_MAX_INPUT_QUEUES CN23XX_MAX_RINGS_PER_PF
#define CN23XX_MAX_IQ_DESCRIPTORS 2048
#define CN23XX_DB_MIN 1
#define CN23XX_DB_MAX 8
#define CN23XX_DB_TIMEOUT 1
#define CN23XX_MAX_OUTPUT_QUEUES CN23XX_MAX_RINGS_PER_PF
#define CN23XX_MAX_OQ_DESCRIPTORS 2048
#define CN23XX_OQ_BUF_SIZE 1536
#define CN23XX_OQ_PKTSPER_INTR 128
/*#define CAVIUM_ONLY_CN23XX_RX_PERF*/
#define CN23XX_OQ_REFIL_THRESHOLD 128
#define CN23XX_OQ_INTR_PKT 64
#define CN23XX_OQ_INTR_TIME 100
#define DEFAULT_NUM_NIC_PORTS_23XX 1
#define CN23XX_CFG_IO_QUEUES CN23XX_MAX_RINGS_PER_PF
/* PEMs count */
#define CN23XX_MAX_MACS 4
#define CN23XX_DEF_IQ_INTR_THRESHOLD 32
#define CN23XX_DEF_IQ_INTR_BYTE_THRESHOLD (64 * 1024)
/* common OCTEON configuration macros */
#define CN6XXX_CFG_IO_QUEUES 32
#define OCTEON_32BYTE_INSTR 32
......@@ -92,6 +120,9 @@
#define CFG_GET_IQ_DB_MIN(cfg) ((cfg)->iq.db_min)
#define CFG_GET_IQ_DB_TIMEOUT(cfg) ((cfg)->iq.db_timeout)
#define CFG_GET_IQ_INTR_PKT(cfg) ((cfg)->iq.iq_intr_pkt)
#define CFG_SET_IQ_INTR_PKT(cfg, val) (cfg)->iq.iq_intr_pkt = val
#define CFG_GET_OQ_MAX_Q(cfg) ((cfg)->oq.max_oqs)
#define CFG_GET_OQ_INFO_PTR(cfg) ((cfg)->oq.info_ptr)
#define CFG_GET_OQ_PKTS_PER_INTR(cfg) ((cfg)->oq.pkts_per_intr)
......@@ -140,19 +171,24 @@
enum lio_card_type {
LIO_210SV = 0, /* Two port, 66xx */
LIO_210NV, /* Two port, 68xx */
LIO_410NV /* Four port, 68xx */
LIO_410NV, /* Four port, 68xx */
LIO_23XX /* 23xx */
};
#define LIO_210SV_NAME "210sv"
#define LIO_210NV_NAME "210nv"
#define LIO_410NV_NAME "410nv"
#define LIO_23XX_NAME "23xx"
/** Structure to define the configuration attributes for each Input queue.
* Applicable to all Octeon processors
**/
struct octeon_iq_config {
#ifdef __BIG_ENDIAN_BITFIELD
u64 reserved:32;
u64 reserved:16;
/** Tx interrupt packets. Applicable to 23xx only */
u64 iq_intr_pkt:16;
/** Minimum ticks to wait before checking for pending instructions. */
u64 db_timeout:16;
......@@ -192,7 +228,10 @@ struct octeon_iq_config {
/** Minimum ticks to wait before checking for pending instructions. */
u64 db_timeout:16;
u64 reserved:32;
/** Tx interrupt packets. Applicable to 23xx only */
u64 iq_intr_pkt:16;
u64 reserved:16;
#endif
};
......@@ -416,11 +455,15 @@ struct octeon_config {
#define DISPATCH_LIST_SIZE BIT(OPCODE_MASK_BITS)
/* Maximum number of Octeon Instruction (command) queues */
#define MAX_OCTEON_INSTR_QUEUES(oct) CN6XXX_MAX_INPUT_QUEUES
/* Maximum number of Octeon Output queues */
#define MAX_OCTEON_OUTPUT_QUEUES(oct) CN6XXX_MAX_OUTPUT_QUEUES
#define MAX_OCTEON_INSTR_QUEUES(oct) \
(OCTEON_CN23XX_PF(oct) ? CN23XX_MAX_INPUT_QUEUES : \
CN6XXX_MAX_INPUT_QUEUES)
#define MAX_POSSIBLE_OCTEON_INSTR_QUEUES CN6XXX_MAX_INPUT_QUEUES
#define MAX_POSSIBLE_OCTEON_OUTPUT_QUEUES CN6XXX_MAX_OUTPUT_QUEUES
/* Maximum number of Octeon Instruction (command) queues */
#define MAX_OCTEON_OUTPUT_QUEUES(oct) \
(OCTEON_CN23XX_PF(oct) ? CN23XX_MAX_OUTPUT_QUEUES : \
CN6XXX_MAX_OUTPUT_QUEUES)
#define MAX_POSSIBLE_OCTEON_INSTR_QUEUES CN23XX_MAX_INPUT_QUEUES
#define MAX_POSSIBLE_OCTEON_OUTPUT_QUEUES CN23XX_MAX_OUTPUT_QUEUES
#endif /* __OCTEON_CONFIG_H__ */
......@@ -25,12 +25,13 @@
*/
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/crc32.h>
#include "liquidio_common.h"
#include "octeon_droq.h"
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
#include "octeon_main.h"
#include "liquidio_image.h"
#include "octeon_mem_ops.h"
static void octeon_remote_lock(void);
......@@ -40,6 +41,10 @@ static u64 cvmx_bootmem_phy_named_block_find(struct octeon_device *oct,
u32 flags);
static int octeon_console_read(struct octeon_device *oct, u32 console_num,
char *buffer, u32 buf_size);
static u32 console_bitmask;
module_param(console_bitmask, int, 0644);
MODULE_PARM_DESC(console_bitmask,
"Bitmask indicating which consoles have debug output redirected to syslog.");
#define MIN(a, b) min((a), (b))
#define CAST_ULL(v) ((u64)(v))
......@@ -177,6 +182,15 @@ struct octeon_pci_console_desc {
__cvmx_bootmem_desc_get(oct, addr, \
offsetof(struct cvmx_bootmem_named_block_desc, field), \
SIZEOF_FIELD(struct cvmx_bootmem_named_block_desc, field))
/**
* \brief determines if a given console has debug enabled.
* @param console console to check
* @returns 1 = enabled. 0 otherwise
*/
static int octeon_console_debug_enabled(u32 console)
{
return (console_bitmask >> (console)) & 0x1;
}
/**
* This function is the implementation of the get macros defined
......@@ -709,3 +723,104 @@ static int octeon_console_read(struct octeon_device *oct, u32 console_num,
return bytes_to_read;
}
#define FBUF_SIZE (4 * 1024 * 1024)
u8 fbuf[FBUF_SIZE];
int octeon_download_firmware(struct octeon_device *oct, const u8 *data,
size_t size)
{
int ret = 0;
u8 *p = fbuf;
u32 crc32_result;
u64 load_addr;
u32 image_len;
struct octeon_firmware_file_header *h;
u32 i, rem;
if (size < sizeof(struct octeon_firmware_file_header)) {
dev_err(&oct->pci_dev->dev, "Firmware file too small (%d < %d).\n",
(u32)size,
(u32)sizeof(struct octeon_firmware_file_header));
return -EINVAL;
}
h = (struct octeon_firmware_file_header *)data;
if (be32_to_cpu(h->magic) != LIO_NIC_MAGIC) {
dev_err(&oct->pci_dev->dev, "Unrecognized firmware file.\n");
return -EINVAL;
}
crc32_result = crc32((unsigned int)~0, data,
sizeof(struct octeon_firmware_file_header) -
sizeof(u32)) ^ ~0U;
if (crc32_result != be32_to_cpu(h->crc32)) {
dev_err(&oct->pci_dev->dev, "Firmware CRC mismatch (0x%08x != 0x%08x).\n",
crc32_result, be32_to_cpu(h->crc32));
return -EINVAL;
}
if (strncmp(LIQUIDIO_PACKAGE, h->version, strlen(LIQUIDIO_PACKAGE))) {
dev_err(&oct->pci_dev->dev, "Unmatched firmware package type. Expected %s, got %s.\n",
LIQUIDIO_PACKAGE, h->version);
return -EINVAL;
}
if (memcmp(LIQUIDIO_BASE_VERSION, h->version + strlen(LIQUIDIO_PACKAGE),
strlen(LIQUIDIO_BASE_VERSION))) {
dev_err(&oct->pci_dev->dev, "Unmatched firmware version. Expected %s.x, got %s.\n",
LIQUIDIO_BASE_VERSION,
h->version + strlen(LIQUIDIO_PACKAGE));
return -EINVAL;
}
if (be32_to_cpu(h->num_images) > LIO_MAX_IMAGES) {
dev_err(&oct->pci_dev->dev, "Too many images in firmware file (%d).\n",
be32_to_cpu(h->num_images));
return -EINVAL;
}
dev_info(&oct->pci_dev->dev, "Firmware version: %s\n", h->version);
snprintf(oct->fw_info.liquidio_firmware_version, 32, "LIQUIDIO: %s",
h->version);
data += sizeof(struct octeon_firmware_file_header);
dev_info(&oct->pci_dev->dev, "%s: Loading %d images\n", __func__,
be32_to_cpu(h->num_images));
/* load all images */
for (i = 0; i < be32_to_cpu(h->num_images); i++) {
load_addr = be64_to_cpu(h->desc[i].addr);
image_len = be32_to_cpu(h->desc[i].len);
dev_info(&oct->pci_dev->dev, "Loading firmware %d at %llx\n",
image_len, load_addr);
/* Write in 4MB chunks*/
rem = image_len;
while (rem) {
if (rem < FBUF_SIZE)
size = rem;
else
size = FBUF_SIZE;
memcpy(p, data, size);
/* download the image */
octeon_pci_write_core_mem(oct, load_addr, p, (u32)size);
data += size;
rem -= (u32)size;
load_addr += size;
}
}
dev_info(&oct->pci_dev->dev, "Writing boot command: %s\n",
h->bootcmd);
/* Invoke the bootcmd */
ret = octeon_console_send_cmd(oct, h->bootcmd, 50);
return 0;
}
......@@ -20,7 +20,6 @@
* Contact Cavium, Inc. for more information
**********************************************************************/
#include <linux/pci.h>
#include <linux/crc32.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include "liquidio_common.h"
......@@ -32,8 +31,7 @@
#include "octeon_network.h"
#include "cn66xx_regs.h"
#include "cn66xx_device.h"
#include "liquidio_image.h"
#include "octeon_mem_ops.h"
#include "cn23xx_pf_device.h"
/** Default configuration
* for CN66XX OCTEON Models.
......@@ -420,6 +418,108 @@ static struct octeon_config default_cn68xx_210nv_conf = {
,
};
static struct octeon_config default_cn23xx_conf = {
.card_type = LIO_23XX,
.card_name = LIO_23XX_NAME,
/** IQ attributes */
.iq = {
.max_iqs = CN23XX_CFG_IO_QUEUES,
.pending_list_size = (CN23XX_MAX_IQ_DESCRIPTORS *
CN23XX_CFG_IO_QUEUES),
.instr_type = OCTEON_64BYTE_INSTR,
.db_min = CN23XX_DB_MIN,
.db_timeout = CN23XX_DB_TIMEOUT,
.iq_intr_pkt = CN23XX_DEF_IQ_INTR_THRESHOLD,
},
/** OQ attributes */
.oq = {
.max_oqs = CN23XX_CFG_IO_QUEUES,
.info_ptr = OCTEON_OQ_INFOPTR_MODE,
.pkts_per_intr = CN23XX_OQ_PKTSPER_INTR,
.refill_threshold = CN23XX_OQ_REFIL_THRESHOLD,
.oq_intr_pkt = CN23XX_OQ_INTR_PKT,
.oq_intr_time = CN23XX_OQ_INTR_TIME,
},
.num_nic_ports = DEFAULT_NUM_NIC_PORTS_23XX,
.num_def_rx_descs = CN23XX_MAX_OQ_DESCRIPTORS,
.num_def_tx_descs = CN23XX_MAX_IQ_DESCRIPTORS,
.def_rx_buf_size = CN23XX_OQ_BUF_SIZE,
/* For ethernet interface 0: Port cfg Attributes */
.nic_if_cfg[0] = {
/* Max Txqs: Half for each of the two ports :max_iq/2 */
.max_txqs = MAX_TXQS_PER_INTF,
/* Actual configured value. Range could be: 1...max_txqs */
.num_txqs = DEF_TXQS_PER_INTF,
/* Max Rxqs: Half for each of the two ports :max_oq/2 */
.max_rxqs = MAX_RXQS_PER_INTF,
/* Actual configured value. Range could be: 1...max_rxqs */
.num_rxqs = DEF_RXQS_PER_INTF,
/* Num of desc for rx rings */
.num_rx_descs = CN23XX_MAX_OQ_DESCRIPTORS,
/* Num of desc for tx rings */
.num_tx_descs = CN23XX_MAX_IQ_DESCRIPTORS,
/* SKB size, We need not change buf size even for Jumbo frames.
* Octeon can send jumbo frames in 4 consecutive descriptors,
*/
.rx_buf_size = CN23XX_OQ_BUF_SIZE,
.base_queue = BASE_QUEUE_NOT_REQUESTED,
.gmx_port_id = 0,
},
.nic_if_cfg[1] = {
/* Max Txqs: Half for each of the two ports :max_iq/2 */
.max_txqs = MAX_TXQS_PER_INTF,
/* Actual configured value. Range could be: 1...max_txqs */
.num_txqs = DEF_TXQS_PER_INTF,
/* Max Rxqs: Half for each of the two ports :max_oq/2 */
.max_rxqs = MAX_RXQS_PER_INTF,
/* Actual configured value. Range could be: 1...max_rxqs */
.num_rxqs = DEF_RXQS_PER_INTF,
/* Num of desc for rx rings */
.num_rx_descs = CN23XX_MAX_OQ_DESCRIPTORS,
/* Num of desc for tx rings */
.num_tx_descs = CN23XX_MAX_IQ_DESCRIPTORS,
/* SKB size, We need not change buf size even for Jumbo frames.
* Octeon can send jumbo frames in 4 consecutive descriptors,
*/
.rx_buf_size = CN23XX_OQ_BUF_SIZE,
.base_queue = BASE_QUEUE_NOT_REQUESTED,
.gmx_port_id = 1,
},
.misc = {
/* Host driver link query interval */
.oct_link_query_interval = 100,
/* Octeon link query interval */
.host_link_query_interval = 500,
.enable_sli_oq_bp = 0,
/* Control queue group */
.ctrlq_grp = 1,
}
};
enum {
OCTEON_CONFIG_TYPE_DEFAULT = 0,
NUM_OCTEON_CONFS,
......@@ -487,6 +587,8 @@ static void *__retrieve_octeon_config_info(struct octeon_device *oct,
} else if ((oct->chip_id == OCTEON_CN68XX) &&
(card_type == LIO_410NV)) {
ret = (void *)&default_cn68xx_conf;
} else if (oct->chip_id == OCTEON_CN23XX_PF_VID) {
ret = (void *)&default_cn23xx_conf;
}
break;
default:
......@@ -501,7 +603,8 @@ static int __verify_octeon_config_info(struct octeon_device *oct, void *conf)
case OCTEON_CN66XX:
case OCTEON_CN68XX:
return lio_validate_cn6xxx_config_info(oct, conf);
case OCTEON_CN23XX_PF_VID:
return 0;
default:
break;
}
......@@ -541,107 +644,6 @@ static char *get_oct_app_string(u32 app_mode)
return oct_dev_app_str[CVM_DRV_INVALID_APP - CVM_DRV_APP_START];
}
u8 fbuf[4 * 1024 * 1024];
int octeon_download_firmware(struct octeon_device *oct, const u8 *data,
size_t size)
{
int ret = 0;
u8 *p = fbuf;
u32 crc32_result;
u64 load_addr;
u32 image_len;
struct octeon_firmware_file_header *h;
u32 i, rem, base_len = strlen(LIQUIDIO_BASE_VERSION);
char *base;
if (size < sizeof(struct octeon_firmware_file_header)) {
dev_err(&oct->pci_dev->dev, "Firmware file too small (%d < %d).\n",
(u32)size,
(u32)sizeof(struct octeon_firmware_file_header));
return -EINVAL;
}
h = (struct octeon_firmware_file_header *)data;
if (be32_to_cpu(h->magic) != LIO_NIC_MAGIC) {
dev_err(&oct->pci_dev->dev, "Unrecognized firmware file.\n");
return -EINVAL;
}
crc32_result = crc32((unsigned int)~0, data,
sizeof(struct octeon_firmware_file_header) -
sizeof(u32)) ^ ~0U;
if (crc32_result != be32_to_cpu(h->crc32)) {
dev_err(&oct->pci_dev->dev, "Firmware CRC mismatch (0x%08x != 0x%08x).\n",
crc32_result, be32_to_cpu(h->crc32));
return -EINVAL;
}
if (strncmp(LIQUIDIO_PACKAGE, h->version, strlen(LIQUIDIO_PACKAGE))) {
dev_err(&oct->pci_dev->dev, "Unmatched firmware package type. Expected %s, got %s.\n",
LIQUIDIO_PACKAGE, h->version);
return -EINVAL;
}
base = h->version + strlen(LIQUIDIO_PACKAGE);
ret = memcmp(LIQUIDIO_BASE_VERSION, base, base_len);
if (ret) {
dev_err(&oct->pci_dev->dev, "Unmatched firmware version. Expected %s.x, got %s.\n",
LIQUIDIO_BASE_VERSION, base);
return -EINVAL;
}
if (be32_to_cpu(h->num_images) > LIO_MAX_IMAGES) {
dev_err(&oct->pci_dev->dev, "Too many images in firmware file (%d).\n",
be32_to_cpu(h->num_images));
return -EINVAL;
}
dev_info(&oct->pci_dev->dev, "Firmware version: %s\n", h->version);
snprintf(oct->fw_info.liquidio_firmware_version, 32, "LIQUIDIO: %s",
h->version);
data += sizeof(struct octeon_firmware_file_header);
dev_info(&oct->pci_dev->dev, "%s: Loading %d images\n", __func__,
be32_to_cpu(h->num_images));
/* load all images */
for (i = 0; i < be32_to_cpu(h->num_images); i++) {
load_addr = be64_to_cpu(h->desc[i].addr);
image_len = be32_to_cpu(h->desc[i].len);
dev_info(&oct->pci_dev->dev, "Loading firmware %d at %llx\n",
image_len, load_addr);
/* Write in 4MB chunks*/
rem = image_len;
while (rem) {
if (rem < (4 * 1024 * 1024))
size = rem;
else
size = 4 * 1024 * 1024;
memcpy(p, data, size);
/* download the image */
octeon_pci_write_core_mem(oct, load_addr, p, (u32)size);
data += size;
rem -= (u32)size;
load_addr += size;
}
}
dev_info(&oct->pci_dev->dev, "Writing boot command: %s\n",
h->bootcmd);
/* Invoke the bootcmd */
ret = octeon_console_send_cmd(oct, h->bootcmd, 50);
return 0;
}
void octeon_free_device_mem(struct octeon_device *oct)
{
int i;
......@@ -676,6 +678,9 @@ static struct octeon_device *octeon_allocate_device_mem(u32 pci_id,
configsize = sizeof(struct octeon_cn6xxx);
break;
case OCTEON_CN23XX_PF_VID:
configsize = sizeof(struct octeon_cn23xx_pf);
break;
default:
pr_err("%s: Unknown PCI Device: 0x%x\n",
__func__,
......@@ -741,6 +746,45 @@ struct octeon_device *octeon_allocate_device(u32 pci_id,
return oct;
}
int
octeon_allocate_ioq_vector(struct octeon_device *oct)
{
int i, num_ioqs = 0;
struct octeon_ioq_vector *ioq_vector;
int cpu_num;
int size;
if (OCTEON_CN23XX_PF(oct))
num_ioqs = oct->sriov_info.num_pf_rings;
size = sizeof(struct octeon_ioq_vector) * num_ioqs;
oct->ioq_vector = vmalloc(size);
if (!oct->ioq_vector)
return 1;
memset(oct->ioq_vector, 0, size);
for (i = 0; i < num_ioqs; i++) {
ioq_vector = &oct->ioq_vector[i];
ioq_vector->oct_dev = oct;
ioq_vector->iq_index = i;
ioq_vector->droq_index = i;
cpu_num = i % num_online_cpus();
cpumask_set_cpu(cpu_num, &ioq_vector->affinity_mask);
if (oct->chip_id == OCTEON_CN23XX_PF_VID)
ioq_vector->ioq_num = i + oct->sriov_info.pf_srn;
else
ioq_vector->ioq_num = i;
}
return 0;
}
void
octeon_free_ioq_vector(struct octeon_device *oct)
{
vfree(oct->ioq_vector);
}
/* this function is only for setting up the first queue */
int octeon_setup_instr_queues(struct octeon_device *oct)
{
......@@ -753,6 +797,9 @@ int octeon_setup_instr_queues(struct octeon_device *oct)
if (OCTEON_CN6XXX(oct))
num_descs =
CFG_GET_NUM_DEF_TX_DESCS(CHIP_FIELD(oct, cn6xxx, conf));
else if (OCTEON_CN23XX_PF(oct))
num_descs = CFG_GET_NUM_DEF_TX_DESCS(CHIP_FIELD(oct, cn23xx_pf,
conf));
oct->num_iqs = 0;
......@@ -794,8 +841,12 @@ int octeon_setup_output_queues(struct octeon_device *oct)
CFG_GET_NUM_DEF_RX_DESCS(CHIP_FIELD(oct, cn6xxx, conf));
desc_size =
CFG_GET_DEF_RX_BUF_SIZE(CHIP_FIELD(oct, cn6xxx, conf));
} else if (OCTEON_CN23XX_PF(oct)) {
num_descs = CFG_GET_NUM_DEF_RX_DESCS(CHIP_FIELD(oct, cn23xx_pf,
conf));
desc_size = CFG_GET_DEF_RX_BUF_SIZE(CHIP_FIELD(oct, cn23xx_pf,
conf));
}
oct->num_oqs = 0;
oct->droq[0] = vmalloc_node(sizeof(*oct->droq[0]), numa_node);
if (!oct->droq[0])
......@@ -1019,6 +1070,9 @@ int octeon_core_drv_init(struct octeon_recv_info *recv_info, void *buf)
if (OCTEON_CN6XXX(oct))
num_nic_ports =
CFG_GET_NUM_NIC_PORTS(CHIP_FIELD(oct, cn6xxx, conf));
else if (OCTEON_CN23XX_PF(oct))
num_nic_ports =
CFG_GET_NUM_NIC_PORTS(CHIP_FIELD(oct, cn23xx_pf, conf));
if (atomic_read(&oct->status) >= OCT_DEV_RUNNING) {
dev_err(&oct->pci_dev->dev, "Received CORE OK when device state is 0x%x\n",
......@@ -1108,8 +1162,10 @@ struct octeon_config *octeon_get_conf(struct octeon_device *oct)
if (OCTEON_CN6XXX(oct)) {
default_oct_conf =
(struct octeon_config *)(CHIP_FIELD(oct, cn6xxx, conf));
} else if (OCTEON_CN23XX_PF(oct)) {
default_oct_conf = (struct octeon_config *)
(CHIP_FIELD(oct, cn23xx_pf, conf));
}
return default_oct_conf;
}
......@@ -1141,7 +1197,9 @@ u64 lio_pci_readq(struct octeon_device *oct, u64 addr)
* So write MSB first
*/
addrhi = (addr >> 32);
if ((oct->chip_id == OCTEON_CN66XX) || (oct->chip_id == OCTEON_CN68XX))
if ((oct->chip_id == OCTEON_CN66XX) ||
(oct->chip_id == OCTEON_CN68XX) ||
(oct->chip_id == OCTEON_CN23XX_PF_VID))
addrhi |= 0x00060000;
writel(addrhi, oct->reg_list.pci_win_rd_addr_hi);
......@@ -1185,8 +1243,15 @@ int octeon_mem_access_ok(struct octeon_device *oct)
u64 lmc0_reset_ctl;
/* Check to make sure a DDR interface is enabled */
if (OCTEON_CN23XX_PF(oct)) {
lmc0_reset_ctl = lio_pci_readq(oct, CN23XX_LMC0_RESET_CTL);
access_okay =
(lmc0_reset_ctl & CN23XX_LMC0_RESET_CTL_DDR3RST_MASK);
} else {
lmc0_reset_ctl = lio_pci_readq(oct, CN6XXX_LMC0_RESET_CTL);
access_okay = (lmc0_reset_ctl & CN6XXX_LMC0_RESET_CTL_DDR3RST_MASK);
access_okay =
(lmc0_reset_ctl & CN6XXX_LMC0_RESET_CTL_DDR3RST_MASK);
}
return access_okay ? 0 : 1;
}
......@@ -1226,3 +1291,20 @@ int lio_get_device_id(void *dev)
return octeon_dev->octeon_id;
return -1;
}
void lio_enable_irq(struct octeon_droq *droq, struct octeon_instr_queue *iq)
{
/* the whole thing needs to be atomic, ideally */
if (droq) {
spin_lock_bh(&droq->lock);
writel(droq->pkt_count, droq->pkts_sent_reg);
droq->pkt_count = 0;
spin_unlock_bh(&droq->lock);
}
if (iq) {
spin_lock_bh(&iq->lock);
writel(iq->pkt_in_done, iq->inst_cnt_reg);
iq->pkt_in_done = 0;
spin_unlock_bh(&iq->lock);
}
}
......@@ -30,13 +30,19 @@
/** PCI VendorId Device Id */
#define OCTEON_CN68XX_PCIID 0x91177d
#define OCTEON_CN66XX_PCIID 0x92177d
#define OCTEON_CN23XX_PCIID_PF 0x9702177d
/** Driver identifies chips by these Ids, created by clubbing together
* DeviceId+RevisionId; Where Revision Id is not used to distinguish
* between chips, a value of 0 is used for revision id.
*/
#define OCTEON_CN68XX 0x0091
#define OCTEON_CN66XX 0x0092
#define OCTEON_CN23XX_PF_VID 0x9702
/**RevisionId for the chips */
#define OCTEON_CN23XX_REV_1_0 0x00
#define OCTEON_CN23XX_REV_1_1 0x01
#define OCTEON_CN23XX_REV_2_0 0x80
/** Endian-swap modes supported by Octeon. */
enum octeon_pci_swap_mode {
......@@ -46,6 +52,9 @@ enum octeon_pci_swap_mode {
OCTEON_PCI_32BIT_LW_SWAP = 3
};
#define OCTEON_OUTPUT_INTR (2)
#define OCTEON_ALL_INTR 0xff
/*--------------- PCI BAR1 index registers -------------*/
/* BAR1 Mask */
......@@ -198,9 +207,9 @@ struct octeon_fn_list {
void (*setup_oq_regs)(struct octeon_device *, u32);
irqreturn_t (*process_interrupt_regs)(void *);
u64 (*msix_interrupt_handler)(void *);
int (*soft_reset)(struct octeon_device *);
int (*setup_device_regs)(struct octeon_device *);
void (*reinit_regs)(struct octeon_device *);
void (*bar1_idx_setup)(struct octeon_device *, u64, u32, int);
void (*bar1_idx_write)(struct octeon_device *, u32, u32);
u32 (*bar1_idx_read)(struct octeon_device *, u32);
......@@ -209,10 +218,10 @@ struct octeon_fn_list {
void (*enable_oq_pkt_time_intr)(struct octeon_device *, u32);
void (*disable_oq_pkt_time_intr)(struct octeon_device *, u32);
void (*enable_interrupt)(void *);
void (*disable_interrupt)(void *);
void (*enable_interrupt)(struct octeon_device *, u8);
void (*disable_interrupt)(struct octeon_device *, u8);
void (*enable_io_queues)(struct octeon_device *);
int (*enable_io_queues)(struct octeon_device *);
void (*disable_io_queues)(struct octeon_device *);
};
......@@ -271,6 +280,66 @@ struct octdev_props {
struct net_device *netdev;
};
#define LIO_FLAG_MSIX_ENABLED 0x1
#define MSIX_PO_INT 0x1
#define MSIX_PI_INT 0x2
struct octeon_pf_vf_hs_word {
#ifdef __LITTLE_ENDIAN_BITFIELD
/** PKIND value assigned for the DPI interface */
u64 pkind : 8;
/** OCTEON core clock multiplier */
u64 core_tics_per_us : 16;
/** OCTEON coprocessor clock multiplier */
u64 coproc_tics_per_us : 16;
/** app that currently running on OCTEON */
u64 app_mode : 8;
/** RESERVED */
u64 reserved : 16;
#else
/** RESERVED */
u64 reserved : 16;
/** app that currently running on OCTEON */
u64 app_mode : 8;
/** OCTEON coprocessor clock multiplier */
u64 coproc_tics_per_us : 16;
/** OCTEON core clock multiplier */
u64 core_tics_per_us : 16;
/** PKIND value assigned for the DPI interface */
u64 pkind : 8;
#endif
};
struct octeon_sriov_info {
/* Actual rings left for PF device */
u32 num_pf_rings;
/* SRN of PF usable IO queues */
u32 pf_srn;
/* total pf rings */
u32 trs;
};
struct octeon_ioq_vector {
struct octeon_device *oct_dev;
int iq_index;
int droq_index;
int vector;
struct cpumask affinity_mask;
u32 ioq_num;
};
/** The Octeon device.
* Each Octeon device has this structure to represent all its
* components.
......@@ -296,7 +365,7 @@ struct octeon_device {
/** Octeon Chip type. */
u16 chip_id;
u16 rev_id;
u16 pf_num;
/** This device's id - set by the driver. */
u32 octeon_id;
......@@ -305,7 +374,6 @@ struct octeon_device {
u16 flags;
#define LIO_FLAG_MSI_ENABLED (u32)(1 << 1)
#define LIO_FLAG_MSIX_ENABLED (u32)(1 << 2)
/** The state of this device */
atomic_t status;
......@@ -395,6 +463,19 @@ struct octeon_device {
void *priv;
int num_msix_irqs;
void *msix_entries;
struct octeon_sriov_info sriov_info;
struct octeon_pf_vf_hs_word pfvf_hsword;
int msix_on;
/** IOq information of it's corresponding MSI-X interrupt. */
struct octeon_ioq_vector *ioq_vector;
int rx_pause;
int tx_pause;
......@@ -408,6 +489,7 @@ struct octeon_device {
#define OCT_DRV_OFFLINE 2
#define OCTEON_CN6XXX(oct) ((oct->chip_id == OCTEON_CN66XX) || \
(oct->chip_id == OCTEON_CN68XX))
#define OCTEON_CN23XX_PF(oct) (oct->chip_id == OCTEON_CN23XX_PF_VID)
#define CHIP_FIELD(oct, TYPE, field) \
(((struct octeon_ ## TYPE *)(oct->chip))->field)
......@@ -661,6 +743,10 @@ void *oct_get_config_info(struct octeon_device *oct, u16 card_type);
*/
struct octeon_config *octeon_get_conf(struct octeon_device *oct);
void octeon_free_ioq_vector(struct octeon_device *oct);
int octeon_allocate_ioq_vector(struct octeon_device *oct);
void lio_enable_irq(struct octeon_droq *droq, struct octeon_instr_queue *iq);
/* LiquidIO driver pivate flags */
enum {
OCT_PRIV_FLAG_TX_BYTES = 0, /* Tx interrupts by pending byte count */
......
......@@ -92,22 +92,25 @@ static inline void *octeon_get_dispatch_arg(struct octeon_device *octeon_dev,
return fn_arg;
}
/** Check for packets on Droq. This function should be called with
* lock held.
/** Check for packets on Droq. This function should be called with lock held.
* @param droq - Droq on which count is checked.
* @return Returns packet count.
*/
u32 octeon_droq_check_hw_for_pkts(struct octeon_droq *droq)
{
u32 pkt_count = 0;
u32 last_count;
pkt_count = readl(droq->pkts_sent_reg);
if (pkt_count) {
atomic_add(pkt_count, &droq->pkts_pending);
writel(pkt_count, droq->pkts_sent_reg);
}
return pkt_count;
last_count = pkt_count - droq->pkt_count;
droq->pkt_count = pkt_count;
/* we shall write to cnts at napi irq enable or end of droq tasklet */
if (last_count)
atomic_add(last_count, &droq->pkts_pending);
return last_count;
}
static void octeon_droq_compute_max_packet_bufs(struct octeon_droq *droq)
......@@ -735,16 +738,20 @@ octeon_droq_process_packets(struct octeon_device *oct,
u32 pkt_count = 0, pkts_processed = 0;
struct list_head *tmp, *tmp2;
/* Grab the droq lock */
spin_lock(&droq->lock);
octeon_droq_check_hw_for_pkts(droq);
pkt_count = atomic_read(&droq->pkts_pending);
if (!pkt_count)
if (!pkt_count) {
spin_unlock(&droq->lock);
return 0;
}
if (pkt_count > budget)
pkt_count = budget;
/* Grab the droq lock */
spin_lock(&droq->lock);
pkts_processed = octeon_droq_fast_process_packets(oct, droq, pkt_count);
atomic_sub(pkts_processed, &droq->pkts_pending);
......@@ -789,6 +796,8 @@ octeon_droq_process_poll_pkts(struct octeon_device *oct,
spin_lock(&droq->lock);
while (total_pkts_processed < budget) {
octeon_droq_check_hw_for_pkts(droq);
pkts_available =
CVM_MIN((budget - total_pkts_processed),
(u32)(atomic_read(&droq->pkts_pending)));
......@@ -803,8 +812,6 @@ octeon_droq_process_poll_pkts(struct octeon_device *oct,
atomic_sub(pkts_processed, &droq->pkts_pending);
total_pkts_processed += pkts_processed;
octeon_droq_check_hw_for_pkts(droq);
}
spin_unlock(&droq->lock);
......
......@@ -261,6 +261,8 @@ struct octeon_droq {
u32 q_no;
u32 pkt_count;
struct octeon_droq_ops ops;
struct octeon_device *oct_dev;
......
......@@ -88,6 +88,8 @@ struct octeon_instr_queue {
/** A spinlock to protect while posting on the ring. */
spinlock_t post_lock;
u32 pkt_in_done;
/** A spinlock to protect access to the input ring.*/
spinlock_t iq_flush_running_lock;
......
......@@ -38,12 +38,26 @@
#define DRV_NAME "LiquidIO"
/**
* \brief determines if a given console has debug enabled.
* @param console console to check
* @returns 1 = enabled. 0 otherwise
/** This structure is used by NIC driver to store information required
* to free the sk_buff when the packet has been fetched by Octeon.
* Bytes offset below assume worst-case of a 64-bit system.
*/
int octeon_console_debug_enabled(u32 console);
struct octnet_buf_free_info {
/** Bytes 1-8. Pointer to network device private structure. */
struct lio *lio;
/** Bytes 9-16. Pointer to sk_buff. */
struct sk_buff *skb;
/** Bytes 17-24. Pointer to gather list. */
struct octnic_gather *g;
/** Bytes 25-32. Physical address of skb->data or gather list. */
u64 dptr;
/** Bytes 33-47. Piggybacked soft command, if any */
struct octeon_soft_command *sc;
};
/* BQL-related functions */
void octeon_report_sent_bytes_to_bql(void *buf, int reqtype);
......
......@@ -19,7 +19,6 @@
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
#include <linux/pci.h>
#include <linux/netdevice.h>
#include "liquidio_common.h"
#include "octeon_droq.h"
......
......@@ -26,8 +26,6 @@
#ifndef __OCTEON_NETWORK_H__
#define __OCTEON_NETWORK_H__
#include <linux/version.h>
#include <linux/dma-mapping.h>
#include <linux/ptp_clock_kernel.h>
#define LIO_MAX_MTU_SIZE (OCTNET_MAX_FRM_SIZE - OCTNET_FRM_HEADER_SIZE)
......
......@@ -19,7 +19,6 @@
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include "liquidio_common.h"
......@@ -73,12 +72,9 @@ octeon_alloc_soft_command_resp(struct octeon_device *oct,
}
int octnet_send_nic_data_pkt(struct octeon_device *oct,
struct octnic_data_pkt *ndata,
u32 xmit_more)
struct octnic_data_pkt *ndata)
{
int ring_doorbell;
ring_doorbell = !xmit_more;
int ring_doorbell = 1;
return octeon_send_command(oct, ndata->q_no, ring_doorbell, &ndata->cmd,
ndata->buf, ndata->datasize,
......
......@@ -278,7 +278,7 @@ octeon_alloc_soft_command_resp(struct octeon_device *oct,
* queue should be stopped, and IQ_SEND_OK if it sent okay.
*/
int octnet_send_nic_data_pkt(struct octeon_device *oct,
struct octnic_data_pkt *ndata, u32 xmit_more);
struct octnic_data_pkt *ndata);
/** Send a NIC control packet to the device
* @param oct - octeon device pointer
......
......@@ -499,6 +499,7 @@ static void __check_db_timeout(struct octeon_device *oct, u64 iq_no)
if (!oct)
return;
iq = oct->instr_queue[iq_no];
if (!iq)
return;
......@@ -514,6 +515,8 @@ static void __check_db_timeout(struct octeon_device *oct, u64 iq_no)
/* Flush the instruction queue */
octeon_flush_iq(oct, iq, 1, 0);
lio_enable_irq(NULL, iq);
}
/* Called by the Poll thread at regular intervals to check the instruction
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment