Commit dbee8a0a authored by Roland Dreier's avatar Roland Dreier Committed by Linus Torvalds

x86: remove 32-bit versions of readq()/writeq()

The presense of a writeq() implementation on 32-bit x86 that splits the
64-bit write into two 32-bit writes turns out to break the mpt2sas driver
(and in general is risky for drivers as was discussed in
<http://lkml.kernel.org/r/adaab6c1h7c.fsf@cisco.com>).  To fix this,
revert 2c5643b1 ("x86: provide readq()/writeq() on 32-bit too") and
follow-on cleanups.

This unfortunately leads to pushing non-atomic definitions of readq() and
write() to various x86-only drivers that in the meantime started using the
definitions in the x86 version of <asm/io.h>.  However as discussed
exhaustively, this is actually the right thing to do, because the right
way to split a 64-bit transaction is hardware dependent and therefore
belongs in the hardware driver (eg mpt2sas needs a spinlock to make sure
no other accesses occur in between the two halves of the access).

Build tested on 32- and 64-bit x86 allmodconfig.

Link: http://lkml.kernel.org/r/x86-32-writeq-is-broken@mdm.bga.comAcked-by: default avatarHitoshi Mitake <h.mitake@gmail.com>
Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Acked-by: default avatarJames Bottomley <James.Bottomley@parallels.com>
Acked-by: default avatarIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 818b667b
......@@ -17,8 +17,6 @@ config X86_64
config X86
def_bool y
select HAVE_AOUT if X86_32
select HAVE_READQ
select HAVE_WRITEQ
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
......
......@@ -38,7 +38,6 @@
#include <linux/string.h>
#include <linux/compiler.h>
#include <asm-generic/int-ll64.h>
#include <asm/page.h>
#include <xen/xen.h>
......@@ -87,27 +86,6 @@ build_mmio_write(__writel, "l", unsigned int, "r", )
build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
#else
static inline __u64 readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
low = readl(p);
high = readl(p + 1);
return low + ((u64)high << 32);
}
static inline void writeq(__u64 val, volatile void __iomem *addr)
{
writel(val, addr);
writel(val >> 32, addr+4);
}
#endif
#define readq_relaxed(a) readq(a)
#define __raw_readq(a) readq(a)
......@@ -117,6 +95,8 @@ static inline void writeq(__u64 val, volatile void __iomem *addr)
#define readq readq
#define writeq writeq
#endif
/**
* virt_to_phys - map virtual addresses to physical
* @address: address to remap
......
......@@ -101,6 +101,14 @@ static DEFINE_MUTEX(einj_mutex);
static struct einj_parameter *einj_param;
#ifndef writeq
static inline void writeq(__u64 val, volatile void __iomem *addr)
{
writel(val, addr);
writel(val >> 32, addr+4);
}
#endif
static void einj_exec_ctx_init(struct apei_exec_context *ctx)
{
apei_exec_ctx_init(ctx, einj_ins_type, ARRAY_SIZE(einj_ins_type),
......
......@@ -280,9 +280,11 @@ static int acpi_atomic_read_mem(u64 paddr, u64 *val, u32 width)
case 32:
*val = readl(addr);
break;
#ifdef readq
case 64:
*val = readq(addr);
break;
#endif
default:
return -EINVAL;
}
......@@ -307,9 +309,11 @@ static int acpi_atomic_write_mem(u64 paddr, u64 val, u32 width)
case 32:
writel(val, addr);
break;
#ifdef writeq
case 64:
writeq(val, addr);
break;
#endif
default:
return -EINVAL;
}
......
......@@ -101,6 +101,19 @@ struct i3200_priv {
static int nr_channels;
#ifndef readq
static inline __u64 readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
low = readl(p);
high = readl(p + 1);
return low + ((u64)high << 32);
}
#endif
static int how_many_channels(struct pci_dev *pdev)
{
unsigned char capid0_8b; /* 8th byte of CAPID0 */
......
......@@ -81,6 +81,19 @@ static void __iomem *rtl_cmd_addr;
static u8 rtl_cmd_type;
static u8 rtl_cmd_width;
#ifndef readq
static inline __u64 readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
low = readl(p);
high = readl(p + 1);
return low + ((u64)high << 32);
}
#endif
static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len)
{
if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO)
......
......@@ -344,6 +344,19 @@ struct ips_driver {
static bool
ips_gpu_turbo_enabled(struct ips_driver *ips);
#ifndef readq
static inline __u64 readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
low = readl(p);
high = readl(p + 1);
return low + ((u64)high << 32);
}
#endif
/**
* ips_cpu_busy - is CPU busy?
* @ips: IPS driver struct
......
......@@ -655,6 +655,27 @@ static int qla4_8xxx_pci_is_same_window(struct scsi_qla_host *ha,
return 0;
}
#ifndef readq
static inline __u64 readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
low = readl(p);
high = readl(p + 1);
return low + ((u64)high << 32);
}
#endif
#ifndef writeq
static inline void writeq(__u64 val, volatile void __iomem *addr)
{
writel(val, addr);
writel(val >> 32, addr+4);
}
#endif
static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha,
u64 off, void *data, int size)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment