usb: otg: twl6030-usb: Fix twl writes

There were mistakes in writing to few twl
registers. There was interchange in the
parameters being passed to twl6030_writeb().
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/otg/twl6030-usb.c

@@ -305,9 +305,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 
 		regulator_enable(twl->usb3v3);
 		twl->asleep = 1;
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
-								0x10);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
 		status = USB_EVENT_ID;
 		otg->default_a = true;
 		twl->phy.state = OTG_STATE_A_IDLE;
@@ -316,12 +315,10 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 		atomic_notifier_call_chain(&twl->phy.notifier, status,
 							otg->gadget);
 	} else  {
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
-								0x10);
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
-								0x1);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 	}
-	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
 
 	return IRQ_HANDLED;
 }
@@ -343,7 +340,7 @@ static int twl6030_enable_irq(struct usb_phy *x)
 {
 	struct twl6030_usb *twl = phy_to_twl(x);
 
-	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);