cxgb4: use firmware API for validating filter spec

Adds support for validating hardware filter spec configured in firmware
before offloading exact match flows.

Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode
and mask from firmware. If the api isn't supported, then fall-back to
older way of reading just the mode from indirect register.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4.h

@@ -280,6 +280,7 @@ struct tp_params {
 	unsigned short tx_modq[NCHAN];	/* channel to modulation queue map */
 
 	u32 vlan_pri_map;               /* cached TP_VLAN_PRI_MAP */
+	u32 filter_mask;
 	u32 ingress_config;             /* cached TP_INGRESS_CONFIG */
 
 	/* cached TP_OUT_CONFIG compressed error vector

drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c

@@ -248,8 +248,9 @@ static int validate_filter(struct net_device *dev,
 	u32 fconf, iconf;
 
 	/* Check for unconfigured fields being used. */
-	fconf = adapter->params.tp.vlan_pri_map;
 	iconf = adapter->params.tp.ingress_config;
+	fconf = fs->hash ? adapter->params.tp.filter_mask :
+			   adapter->params.tp.vlan_pri_map;
 
 	if (unsupported(fconf, FCOE_F, fs->val.fcoe, fs->mask.fcoe) ||
 	    unsupported(fconf, PORT_F, fs->val.iport, fs->mask.iport) ||

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -9388,8 +9388,9 @@ int t4_init_sge_params(struct adapter *adapter)
  */
 int t4_init_tp_params(struct adapter *adap, bool sleep_ok)
 {
-	int chan;
-	u32 v;
+	u32 param, val, v;
+	int chan, ret;
+
 
 	v = t4_read_reg(adap, TP_TIMER_RESOLUTION_A);
 	adap->params.tp.tre = TIMERRESOLUTION_G(v);
@@ -9399,11 +9400,47 @@ int t4_init_tp_params(struct adapter *adap, bool sleep_ok)
 	for (chan = 0; chan < NCHAN; chan++)
 		adap->params.tp.tx_modq[chan] = chan;
 
-	/* Cache the adapter's Compressed Filter Mode and global Incress
+	/* Cache the adapter's Compressed Filter Mode/Mask and global Ingress
 	 * Configuration.
 	 */
-	t4_tp_pio_read(adap, &adap->params.tp.vlan_pri_map, 1,
-		       TP_VLAN_PRI_MAP_A, sleep_ok);
+	param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+		 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FILTER) |
+		 FW_PARAMS_PARAM_Y_V(FW_PARAM_DEV_FILTER_MODE_MASK));
+
+	/* Read current value */
+	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
+			      &param, &val);
+	if (ret == 0) {
+		dev_info(adap->pdev_dev,
+			 "Current filter mode/mask 0x%x:0x%x\n",
+			 FW_PARAMS_PARAM_FILTER_MODE_G(val),
+			 FW_PARAMS_PARAM_FILTER_MASK_G(val));
+		adap->params.tp.vlan_pri_map =
+			FW_PARAMS_PARAM_FILTER_MODE_G(val);
+		adap->params.tp.filter_mask =
+			FW_PARAMS_PARAM_FILTER_MASK_G(val);
+	} else {
+		dev_info(adap->pdev_dev,
+			 "Failed to read filter mode/mask via fw api, using indirect-reg-read\n");
+
+		/* Incase of older-fw (which doesn't expose the api
+		 * FW_PARAM_DEV_FILTER_MODE_MASK) and newer-driver (which uses
+		 * the fw api) combination, fall-back to older method of reading
+		 * the filter mode from indirect-register
+		 */
+		t4_tp_pio_read(adap, &adap->params.tp.vlan_pri_map, 1,
+			       TP_VLAN_PRI_MAP_A, sleep_ok);
+
+		/* With the older-fw and newer-driver combination we might run
+		 * into an issue when user wants to use hash filter region but
+		 * the filter_mask is zero, in this case filter_mask validation
+		 * is tough. To avoid that we set the filter_mask same as filter
+		 * mode, which will behave exactly as the older way of ignoring
+		 * the filter mask validation.
+		 */
+		adap->params.tp.filter_mask = adap->params.tp.vlan_pri_map;
+	}
+
 	t4_tp_pio_read(adap, &adap->params.tp.ingress_config, 1,
 		       TP_INGRESS_CONFIG_A, sleep_ok);
 

drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h

@@ -1221,6 +1221,23 @@ enum fw_params_mnem {
 /*
  * device parameters
  */
+
+#define FW_PARAMS_PARAM_FILTER_MODE_S 16
+#define FW_PARAMS_PARAM_FILTER_MODE_M 0xffff
+#define FW_PARAMS_PARAM_FILTER_MODE_V(x)          \
+	((x) << FW_PARAMS_PARAM_FILTER_MODE_S)
+#define FW_PARAMS_PARAM_FILTER_MODE_G(x)          \
+	(((x) >> FW_PARAMS_PARAM_FILTER_MODE_S) & \
+	FW_PARAMS_PARAM_FILTER_MODE_M)
+
+#define FW_PARAMS_PARAM_FILTER_MASK_S 0
+#define FW_PARAMS_PARAM_FILTER_MASK_M 0xffff
+#define FW_PARAMS_PARAM_FILTER_MASK_V(x)          \
+	((x) << FW_PARAMS_PARAM_FILTER_MASK_S)
+#define FW_PARAMS_PARAM_FILTER_MASK_G(x)          \
+	(((x) >> FW_PARAMS_PARAM_FILTER_MASK_S) & \
+	FW_PARAMS_PARAM_FILTER_MASK_M)
+
 enum fw_params_param_dev {
 	FW_PARAMS_PARAM_DEV_CCLK	= 0x00, /* chip core clock in khz */
 	FW_PARAMS_PARAM_DEV_PORTVEC	= 0x01, /* the port vector */
@@ -1258,6 +1275,7 @@ enum fw_params_param_dev {
 	FW_PARAMS_PARAM_DEV_HASHFILTER_WITH_OFLD = 0x28,
 	FW_PARAMS_PARAM_DEV_DBQ_TIMER	= 0x29,
 	FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK = 0x2A,
+	FW_PARAMS_PARAM_DEV_FILTER = 0x2E,
 };
 
 /*
@@ -1349,6 +1367,11 @@ enum fw_params_param_dev_diag {
 	FW_PARAM_DEV_DIAG_MAXTMPTHRESH	= 0x02,
 };
 
+enum fw_params_param_dev_filter {
+	FW_PARAM_DEV_FILTER_VNIC_MODE   = 0x00,
+	FW_PARAM_DEV_FILTER_MODE_MASK   = 0x01,
+};
+
 enum fw_params_param_dev_fwcache {
 	FW_PARAM_DEV_FWCACHE_FLUSH      = 0x00,
 	FW_PARAM_DEV_FWCACHE_FLUSHINV   = 0x01,