[media] DIB9000: initial support added

This patchs add initial support for the DiB9000-device. This
demodulator is firmware-driven.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/frontends/Kconfig

@@ -349,6 +349,14 @@ config DVB_DIB7000P
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
 
+config DVB_DIB9000
+	tristate "DiBcom 9000"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
 config DVB_TDA10048
 	tristate "Philips TDA10048HN based"
 	depends on DVB_CORE && I2C

drivers/media/dvb/frontends/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB8000) += dib8000.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB9000) += dib9000.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o

drivers/media/dvb/frontends/dib9000.h

+#ifndef DIB9000_H
+#define DIB9000_H
+
+#include "dibx000_common.h"
+
+struct dib9000_config {
+	u8 dvbt_mode;
+	u8 output_mpeg2_in_188_bytes;
+	u8 hostbus_diversity;
+	struct dibx000_bandwidth_config *bw;
+
+	u16 if_drives;
+
+	u32 timing_frequency;
+	u32 xtal_clock_khz;
+	u32 vcxo_timer;
+	u32 demod_clock_khz;
+
+	const u8 *microcode_B_fe_buffer;
+	u32 microcode_B_fe_size;
+
+	struct dibGPIOFunction gpio_function[2];
+	struct dibSubbandSelection subband;
+
+	u8 output_mode;
+};
+
+#define DEFAULT_DIB9000_I2C_ADDRESS 18
+
+#if defined(CONFIG_DVB_DIB9000) || (defined(CONFIG_DVB_DIB9000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, const struct dib9000_config *cfg);
+extern int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr);
+extern struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe);
+extern struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating);
+extern int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val);
+extern int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff);
+extern int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff);
+extern int dib9000_firmware_post_pll_init(struct dvb_frontend *fe);
+extern int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave);
+extern int dib9000_remove_slave_frontend(struct dvb_frontend *fe);
+extern struct dvb_frontend * dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index);
+extern struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe);
+extern int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c);
+extern int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed);
+#else
+static inline struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib9000_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline struct i2c_adapter *dib9000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline int dib9000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline int dib9000_firmware_post_pll_init(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline int dib9000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+int dib9000_remove_slave_frontend(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline struct dvb_frontend * dib9000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) {
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline struct i2c_adapter *dib9000_get_component_bus_interface(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline int dib9000_set_i2c_adapter(struct dvb_frontend *fe, struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+static inline int dib9000_fw_set_component_bus_speed(struct dvb_frontend *fe, u16 speed)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+#endif
+
+#endif

drivers/media/dvb/frontends/dibx000_common.h

@@ -219,6 +219,51 @@ struct dvb_frontend_parametersContext {
 
 #define FE_CALLBACK_TIME_NEVER 0xffffffff
 
-#define ABS(x) ((x < 0) ? (-x) : (x))
+#define ABS(x) ((x<0)?(-x):(x))
+
+#define DATA_BUS_ACCESS_MODE_8BIT                 0x01
+#define DATA_BUS_ACCESS_MODE_16BIT                0x02
+#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10
+
+struct dibGPIOFunction {
+#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
+#define BOARD_GPIO_COMPONENT_DEMOD       2
+	u8 component;
+
+#define BOARD_GPIO_FUNCTION_BOARD_ON      1
+#define BOARD_GPIO_FUNCTION_BOARD_OFF     2
+#define BOARD_GPIO_FUNCTION_COMPONENT_ON  3
+#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
+#define BOARD_GPIO_FUNCTION_SUBBAND_PWM   5
+#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO   6
+	u8 function;
+
+/* mask, direction and value are used specify which GPIO to change GPIO0
+ * is LSB and possible GPIO31 is MSB.  The same bit-position as in the
+ * mask is used for the direction and the value. Direction == 1 is OUT,
+ * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
+ * value has no meaning.
+ *
+ * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
+ * used to do the PWM. Direction gives the PWModulator to be used.
+ * Value gives the PWM value in device-dependent scale.
+ */
+	u32 mask;
+	u32 direction;
+	u32 value;
+};
+
+#define MAX_NB_SUBBANDS   8
+struct dibSubbandSelection {
+	u8  size; /* Actual number of subbands. */
+	struct {
+		u16 f_mhz;
+		struct dibGPIOFunction gpio;
+	} subband[MAX_NB_SUBBANDS];
+};
+
+#define DEMOD_TIMF_SET    0x00
+#define DEMOD_TIMF_GET    0x01
+#define DEMOD_TIMF_UPDATE 0x02
 
 #endif