Skip to content

L
linux
Commit dd7c7ab0 authored by Vineet Gupta's avatar Vineet Gupta
Browse files
Options

ARC: [plat-eznps]: Drop support for EZChip NPS platform 

NPS customers are no longer doing active development, as evident from
rand config build failures reported in recent times, so drop support
for NPS platform.
Tested-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 549738f1
Show whitespace changes
Inline Side-by-side
Showing with 5 additions and 1353 deletions
MAINTAINERS
View file @ dd7c7ab0
......@@ -6608,13 +6608,6 @@ L: iommu@lists.linux-foundation.org
S: Maintained
F: drivers/iommu/exynos-iommu.c
EZchip NPS platform support
M: Vineet Gupta <vgupta@synopsys.com>
M: Ofer Levi <oferle@nvidia.com>
S: Supported
F: arch/arc/boot/dts/eznps.dts
F: arch/arc/plat-eznps
F2FS FILE SYSTEM
M: Jaegeuk Kim <jaegeuk@kernel.org>
M: Chao Yu <yuchao0@huawei.com>
......
arch/arc/Kconfig
View file @ dd7c7ab0
......@@ -96,8 +96,6 @@ menu "ARC Platform/SoC/Board"
source "arch/arc/plat-tb10x/Kconfig"
source "arch/arc/plat-axs10x/Kconfig"
#New platform adds here
source "arch/arc/plat-eznps/Kconfig"
source "arch/arc/plat-hsdk/Kconfig"
endmenu
......
arch/arc/Makefile
View file @ dd7c7ab0
......@@ -94,13 +94,8 @@ core-y += arch/arc/boot/dts/
core-y += arch/arc/plat-sim/
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
core-$(CONFIG_ARC_PLAT_EZNPS) += arch/arc/plat-eznps/
core-$(CONFIG_ARC_SOC_HSDK) += arch/arc/plat-hsdk/
ifdef CONFIG_ARC_PLAT_EZNPS
KBUILD_CPPFLAGS += -I$(srctree)/arch/arc/plat-eznps/include
endif
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
libs-y += arch/arc/lib/ $(LIBGCC)
......
arch/arc/boot/dts/eznps.dts deleted 100644 → 0
View file @ 549738f1
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*/
/dts-v1/;
/ {
compatible = "ezchip,arc-nps";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
present-cpus = "0-1,16-17";
possible-cpus = "0-4095";
aliases {
ethernet0 = &gmac0;
};
chosen {
bootargs = "earlycon=uart8250,mmio32be,0xf7209000,115200n8 console=ttyS0,115200n8";
};
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512M */
};
clocks {
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <83333333>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
intc: interrupt-controller {
compatible = "ezchip,nps400-ic";
interrupt-controller;
#interrupt-cells = <1>;
};
timer0: timer_clkevt {
compatible = "snps,arc-timer";
interrupts = <3>;
clocks = <&sysclk>;
};
timer1: timer_clksrc {
compatible = "ezchip,nps400-timer";
clocks = <&sysclk>;
clock-names="sysclk";
};
uart@f7209000 {
compatible = "snps,dw-apb-uart";
device_type = "serial";
reg = <0xf7209000 0x100>;
interrupts = <6>;
clocks = <&sysclk>;
clock-names="baudclk";
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
native-endian;
};
gmac0: ethernet@f7470000 {
compatible = "ezchip,nps-mgt-enet";
reg = <0xf7470000 0x1940>;
interrupts = <7>;
/* Filled in by U-Boot */
mac-address = [ 00 C0 00 F0 04 03 ];
};
};
};
arch/arc/configs/nps_defconfig deleted 100644 → 0
View file @ 549738f1
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARC_PLAT_EZNPS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_ARC_CACHE_LINE_SHIFT=5
# CONFIG_ARC_CACHE_PAGES is not set
# CONFIG_ARC_HAS_LLSC is not set
CONFIG_ARC_KVADDR_SIZE=402
CONFIG_ARC_EMUL_UNALIGNED=y
CONFIG_PREEMPT=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=2048
CONFIG_NETDEVICES=y
CONFIG_NETCONSOLE=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
arch/arc/include/asm/atomic.h
View file @ dd7c7ab0
......@@ -14,8 +14,6 @@
#include <asm/barrier.h>
#include <asm/smp.h>
#ifndef CONFIG_ARC_PLAT_EZNPS
#define atomic_read(v) READ_ONCE((v)->counter)
#ifdef CONFIG_ARC_HAS_LLSC
......@@ -195,108 +193,6 @@ ATOMIC_OPS(andnot, &= ~, bic)
ATOMIC_OPS(or, |=, or)
ATOMIC_OPS(xor, ^=, xor)
#else /* CONFIG_ARC_PLAT_EZNPS */
static inline int atomic_read(const atomic_t *v)
{
int temp;
__asm__ __volatile__(
" ld.di %0, [%1]"
: "=r"(temp)
: "r"(&v->counter)
: "memory");
return temp;
}
static inline void atomic_set(atomic_t *v, int i)
{
__asm__ __volatile__(
" st.di %0,[%1]"
:
: "r"(i), "r"(&v->counter)
: "memory");
}
#define ATOMIC_OP(op, c_op, asm_op) \
static inline void atomic_##op(int i, atomic_t *v) \
{ \
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
: \
: "r"(i), "r"(&v->counter), "i"(asm_op) \
: "r2", "r3", "memory"); \
} \
#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
static inline int atomic_##op##_return(int i, atomic_t *v) \
{ \
unsigned int temp = i; \
\
/* Explicit full memory barrier needed before/after */ \
smp_mb(); \
\
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
" mov %0, r2" \
: "+r"(temp) \
: "r"(&v->counter), "i"(asm_op) \
: "r2", "r3", "memory"); \
\
smp_mb(); \
\
temp c_op i; \
\
return temp; \
}
#define ATOMIC_FETCH_OP(op, c_op, asm_op) \
static inline int atomic_fetch_##op(int i, atomic_t *v) \
{ \
unsigned int temp = i; \
\
/* Explicit full memory barrier needed before/after */ \
smp_mb(); \
\
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
" mov %0, r2" \
: "+r"(temp) \
: "r"(&v->counter), "i"(asm_op) \
: "r2", "r3", "memory"); \
\
smp_mb(); \
\
return temp; \
}
#define ATOMIC_OPS(op, c_op, asm_op) \
ATOMIC_OP(op, c_op, asm_op) \
ATOMIC_OP_RETURN(op, c_op, asm_op) \
ATOMIC_FETCH_OP(op, c_op, asm_op)
ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3)
#define atomic_sub(i, v) atomic_add(-(i), (v))
#define atomic_sub_return(i, v) atomic_add_return(-(i), (v))
#define atomic_fetch_sub(i, v) atomic_fetch_add(-(i), (v))
#undef ATOMIC_OPS
#define ATOMIC_OPS(op, c_op, asm_op) \
ATOMIC_OP(op, c_op, asm_op) \
ATOMIC_FETCH_OP(op, c_op, asm_op)
ATOMIC_OPS(and, &=, CTOP_INST_AAND_DI_R2_R2_R3)
ATOMIC_OPS(or, |=, CTOP_INST_AOR_DI_R2_R2_R3)
ATOMIC_OPS(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3)
#endif /* CONFIG_ARC_PLAT_EZNPS */
#undef ATOMIC_OPS
#undef ATOMIC_FETCH_OP
#undef ATOMIC_OP_RETURN
......
arch/arc/include/asm/barrier.h
View file @ dd7c7ab0
......@@ -27,7 +27,7 @@
#define rmb() asm volatile("dmb 1\n" : : : "memory")
#define wmb() asm volatile("dmb 2\n" : : : "memory")
#elif !defined(CONFIG_ARC_PLAT_EZNPS) /* CONFIG_ISA_ARCOMPACT */
#else
/*
* ARCompact based cores (ARC700) only have SYNC instruction which is super
......@@ -37,13 +37,6 @@
#define mb() asm volatile("sync\n" : : : "memory")
#else /* CONFIG_ARC_PLAT_EZNPS */
#include <plat/ctop.h>
#define mb() asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
#define rmb() asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RD) : "memory")
#endif
#include <asm-generic/barrier.h>
......
arch/arc/include/asm/bitops.h
View file @ dd7c7ab0
......@@ -85,7 +85,7 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
return (old & (1 << nr)) != 0; \
}
#elif !defined(CONFIG_ARC_PLAT_EZNPS)
#else /* !CONFIG_ARC_HAS_LLSC */
/*
* Non hardware assisted Atomic-R-M-W
......@@ -136,55 +136,7 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
return (old & (1UL << (nr & 0x1f))) != 0; \
}
#else /* CONFIG_ARC_PLAT_EZNPS */
#define BIT_OP(op, c_op, asm_op) \
static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
m += nr >> 5; \
\
nr = (1UL << (nr & 0x1f)); \
if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
nr = ~nr; \
\
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
: \
: "r"(nr), "r"(m), "i"(asm_op) \
: "r2", "r3", "memory"); \
}
#define TEST_N_BIT_OP(op, c_op, asm_op) \
static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned long old; \
\
m += nr >> 5; \
\
nr = old = (1UL << (nr & 0x1f)); \
if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
old = ~old; \
\
/* Explicit full memory barrier needed before/after */ \
smp_mb(); \
\
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
" mov %0, r2" \
: "+r"(old) \
: "r"(m), "i"(asm_op) \
: "r2", "r3", "memory"); \
\
smp_mb(); \
\
return (old & nr) != 0; \
}
#endif /* CONFIG_ARC_PLAT_EZNPS */
#endif
/***************************************
* Non atomic variants
......@@ -226,15 +178,9 @@ static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long
/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
__TEST_N_BIT_OP(op, c_op, asm_op)
#ifndef CONFIG_ARC_PLAT_EZNPS
BIT_OPS(set, |, bset)
BIT_OPS(clear, & ~, bclr)
BIT_OPS(change, ^, bxor)
#else
BIT_OPS(set, |, CTOP_INST_AOR_DI_R2_R2_R3)
BIT_OPS(clear, & ~, CTOP_INST_AAND_DI_R2_R2_R3)
BIT_OPS(change, ^, CTOP_INST_AXOR_DI_R2_R2_R3)
#endif
/*
* This routine doesn't need to be atomic.
......
arch/arc/include/asm/cmpxchg.h
View file @ dd7c7ab0
......@@ -41,7 +41,7 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
return prev;
}
#elif !defined(CONFIG_ARC_PLAT_EZNPS)
#else /* !CONFIG_ARC_HAS_LLSC */
static inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
......@@ -61,33 +61,7 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
return prev;
}
#else /* CONFIG_ARC_PLAT_EZNPS */
static inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
{
/*
* Explicit full memory barrier needed before/after
*/
smp_mb();
write_aux_reg(CTOP_AUX_GPA1, expected);
__asm__ __volatile__(
" mov r2, %0\n"
" mov r3, %1\n"
" .word %2\n"
" mov %0, r2"
: "+r"(new)
: "r"(ptr), "i"(CTOP_INST_EXC_DI_R2_R2_R3)
: "r2", "r3", "memory");
smp_mb();
return new;
}
#endif /* CONFIG_ARC_HAS_LLSC */
#endif
#define cmpxchg(ptr, o, n) ({ \
(typeof(*(ptr)))__cmpxchg((ptr), \
......@@ -104,8 +78,6 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
#ifndef CONFIG_ARC_PLAT_EZNPS
/*
* xchg (reg with memory) based on "Native atomic" EX insn
*/
......@@ -168,44 +140,6 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
#endif
#else /* CONFIG_ARC_PLAT_EZNPS */
static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
int size)
{
extern unsigned long __xchg_bad_pointer(void);
switch (size) {
case 4:
/*
* Explicit full memory barrier needed before/after
*/
smp_mb();
__asm__ __volatile__(
" mov r2, %0\n"
" mov r3, %1\n"
" .word %2\n"
" mov %0, r2\n"
: "+r"(val)
: "r"(ptr), "i"(CTOP_INST_XEX_DI_R2_R2_R3)
: "r2", "r3", "memory");
smp_mb();
return val;
}
return __xchg_bad_pointer();
}
#define xchg(ptr, with) ({ \
(typeof(*(ptr)))__xchg((unsigned long)(with), \
(ptr), \
sizeof(*(ptr))); \
})
#endif /* CONFIG_ARC_PLAT_EZNPS */
/*
* "atomic" variant of xchg()
* REQ: It needs to follow the same serialization rules as other atomic_xxx()
......
arch/arc/include/asm/entry-compact.h
View file @ dd7c7ab0
......@@ -33,10 +33,6 @@
#include <asm/irqflags-compact.h>
#include <asm/thread_info.h> /* For THREAD_SIZE */
#ifdef CONFIG_ARC_PLAT_EZNPS
#include <plat/ctop.h>
#endif
/*--------------------------------------------------------------
* Switch to Kernel Mode stack if SP points to User Mode stack
*
......@@ -189,12 +185,6 @@
PUSHAX lp_start
PUSHAX erbta
#ifdef CONFIG_ARC_PLAT_EZNPS
.word CTOP_INST_SCHD_RW
PUSHAX CTOP_AUX_GPA1
PUSHAX CTOP_AUX_EFLAGS
#endif
lr r10, [ecr]
st r10, [sp, PT_event] /* EV_Trap expects r10 to have ECR */
.endm
......@@ -211,11 +201,6 @@
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro EXCEPTION_EPILOGUE
#ifdef CONFIG_ARC_PLAT_EZNPS
.word CTOP_INST_SCHD_RW
POPAX CTOP_AUX_EFLAGS
POPAX CTOP_AUX_GPA1
#endif
POPAX erbta
POPAX lp_start
......@@ -278,11 +263,6 @@
PUSHAX lp_start
PUSHAX bta_l\LVL\()
#ifdef CONFIG_ARC_PLAT_EZNPS
.word CTOP_INST_SCHD_RW
PUSHAX CTOP_AUX_GPA1
PUSHAX CTOP_AUX_EFLAGS
#endif
.endm
/*--------------------------------------------------------------
......@@ -295,11 +275,6 @@
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro INTERRUPT_EPILOGUE LVL
#ifdef CONFIG_ARC_PLAT_EZNPS
.word CTOP_INST_SCHD_RW
POPAX CTOP_AUX_EFLAGS
POPAX CTOP_AUX_GPA1
#endif
POPAX bta_l\LVL\()
POPAX lp_start
......@@ -327,13 +302,11 @@
bic \reg, sp, (THREAD_SIZE - 1)
.endm
#ifndef CONFIG_ARC_PLAT_EZNPS
/* Get CPU-ID of this core */
.macro GET_CPU_ID reg
lr \reg, [identity]
lsr \reg, \reg, 8
bmsk \reg, \reg, 7
.endm
#endif
#endif /* __ASM_ARC_ENTRY_COMPACT_H */
arch/arc/include/asm/processor.h
View file @ dd7c7ab0
......@@ -17,13 +17,6 @@
#include <asm/dsp.h>
#include <asm/fpu.h>
#ifdef CONFIG_ARC_PLAT_EZNPS
struct eznps_dp {
unsigned int eflags;
unsigned int gpa1;
};
#endif
/* Arch specific stuff which needs to be saved per task.
* However these items are not so important so as to earn a place in
* struct thread_info
......@@ -38,9 +31,6 @@ struct thread_struct {
#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
struct arc_fpu fpu;
#endif
#ifdef CONFIG_ARC_PLAT_EZNPS
struct eznps_dp dp;
#endif
};
#define INIT_THREAD { \
......@@ -60,17 +50,8 @@ struct task_struct;
* A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
* get optimised away by gcc
*/
#ifndef CONFIG_EZNPS_MTM_EXT
#define cpu_relax() barrier()
#else
#define cpu_relax() \
__asm__ __volatile__ (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
#endif
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ret)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
......@@ -118,25 +99,7 @@ extern unsigned int get_wchan(struct task_struct *p);
#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE)
#ifdef CONFIG_ARC_PLAT_EZNPS
/* NPS architecture defines special window of 129M in user address space for
* special memory areas, when accessing this window the MMU do not use TLB.
* Instead MMU direct the access to:
* 0x57f00000:0x57ffffff -- 1M of closely coupled memory (aka CMEM)
* 0x58000000:0x5fffffff -- 16 huge pages, 8M each, with fixed map (aka FMTs)
*
* CMEM - is the fastest memory we got and its size is 16K.
* FMT - is used to map either to internal/external memory.
* Internal memory is the second fast memory and its size is 16M
* External memory is the biggest memory (16G) and also the slowest.
*
* STACK_TOP need to be PMD align (21bit) that is why we supply 0x57e00000.
*/
#define STACK_TOP 0x57e00000
#else
#define STACK_TOP TASK_SIZE
#endif
#define STACK_TOP_MAX STACK_TOP
/* This decides where the kernel will search for a free chunk of vm
......
arch/arc/include/asm/ptrace.h
View file @ dd7c7ab0
......@@ -16,11 +16,6 @@
#ifdef CONFIG_ISA_ARCOMPACT
struct pt_regs {
#ifdef CONFIG_ARC_PLAT_EZNPS
unsigned long eflags; /* Extended FLAGS */
unsigned long gpa1; /* General Purpose Aux */
#endif
/* Real registers */
unsigned long bta; /* bta_l1, bta_l2, erbta */
......
arch/arc/include/asm/setup.h
View file @ dd7c7ab0
......@@ -9,11 +9,7 @@
#include <linux/types.h>
#include <uapi/asm/setup.h>
#ifdef CONFIG_ARC_PLAT_EZNPS
#define COMMAND_LINE_SIZE 2048
#else
#define COMMAND_LINE_SIZE 256
#endif
/*
* Data structure to map a ID to string
......
arch/arc/include/asm/spinlock.h
View file @ dd7c7ab0
......@@ -232,15 +232,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
__asm__ __volatile__(
"1: ex %0, [%1] \n"
#ifdef CONFIG_EZNPS_MTM_EXT
" .word %3 \n"
#endif
" breq %0, %2, 1b \n"
: "+&r" (val)
: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
#ifdef CONFIG_EZNPS_MTM_EXT
, "i"(CTOP_INST_SCHD_RW)
#endif
: "memory");
smp_mb();
......
arch/arc/include/asm/switch_to.h
View file @ dd7c7ab0
......@@ -12,19 +12,10 @@
#include <asm/dsp-impl.h>
#include <asm/fpu.h>
#ifdef CONFIG_ARC_PLAT_EZNPS
extern void dp_save_restore(struct task_struct *p, struct task_struct *n);
#define ARC_EZNPS_DP_PREV(p, n) dp_save_restore(p, n)
#else
#define ARC_EZNPS_DP_PREV(p, n)
#endif /* !CONFIG_ARC_PLAT_EZNPS */
struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
#define switch_to(prev, next, last) \
do { \
ARC_EZNPS_DP_PREV(prev, next); \
dsp_save_restore(prev, next); \
fpu_save_restore(prev, next); \
last = __switch_to(prev, next);\
......
arch/arc/kernel/ctx_sw.c
View file @ dd7c7ab0
......@@ -14,9 +14,6 @@
#include <asm/asm-offsets.h>
#include <linux/sched.h>
#include <linux/sched/debug.h>
#ifdef CONFIG_ARC_PLAT_EZNPS
#include <plat/ctop.h>
#endif
#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4)
......@@ -67,17 +64,10 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
*/
#ifndef CONFIG_SMP
"st %2, [@_current_task] \n\t"
#else
#ifdef CONFIG_ARC_PLAT_EZNPS
"lr r24, [%4] \n\t"
#ifndef CONFIG_EZNPS_MTM_EXT
"lsr r24, r24, 4 \n\t"
#endif
#else
"lr r24, [identity] \n\t"
"lsr r24, r24, 8 \n\t"
"bmsk r24, r24, 7 \n\t"
#endif
"add2 r24, @_current_task, r24 \n\t"
"st %2, [r24] \n\t"
#endif
......@@ -115,9 +105,6 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
: "=r"(tmp)
: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
#ifdef CONFIG_ARC_PLAT_EZNPS
, "i"(CTOP_AUX_LOGIC_GLOBAL_ID)
#endif
: "blink"
);
......
arch/arc/kernel/devtree.c
View file @ dd7c7ab0
......@@ -29,8 +29,6 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") ||
of_flat_dt_is_compatible(dt_root, "snps,hsdk"))
arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x & HSDK) */
else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */
else
arc_base_baud = 50000000; /* Fixed default 50MHz */
}
......
arch/arc/kernel/process.c
View file @ dd7c7ab0
......@@ -116,17 +116,6 @@ void arch_cpu_idle(void)
:"I"(arg)); /* can't be "r" has to be embedded const */
}
#elif defined(CONFIG_EZNPS_MTM_EXT) /* ARC700 variant in NPS */
void arch_cpu_idle(void)
{
/* only the calling HW thread needs to sleep */
__asm__ __volatile__(
".word %0 \n"
:
:"i"(CTOP_INST_HWSCHD_WFT_IE12));
}
#else /* ARC700 */
void arch_cpu_idle(void)
......@@ -278,10 +267,6 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
*/
regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
#ifdef CONFIG_EZNPS_MTM_EXT
regs->eflags = 0;
#endif
fpu_init_task(regs);
/* bogus seed values for debugging */
......
arch/arc/mm/tlbex.S
View file @ dd7c7ab0
......@@ -281,13 +281,6 @@ ex_saved_reg1:
.macro COMMIT_ENTRY_TO_MMU
#if (CONFIG_ARC_MMU_VER < 4)
#ifdef CONFIG_EZNPS_MTM_EXT
/* verify if entry for this vaddr+ASID already exists */
sr TLBProbe, [ARC_REG_TLBCOMMAND]
lr r0, [ARC_REG_TLBINDEX]
bbit0 r0, 31, 88f
#endif
/* Get free TLB slot: Set = computed from vaddr, way = random */
sr TLBGetIndex, [ARC_REG_TLBCOMMAND]
......
arch/arc/plat-eznps/Kconfig deleted 100644 → 0
View file @ 549738f1
# SPDX-License-Identifier: GPL-2.0
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.rst.
#
menuconfig ARC_PLAT_EZNPS
bool "\"EZchip\" ARC dev platform"
depends on ISA_ARCOMPACT
select CPU_BIG_ENDIAN
select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
select EZNPS_GIC
select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
help
Support for EZchip development platforms,
based on ARC700 cores.
We handle few flavors:
- Hardware Emulator AKA HE which is FPGA based chassis
- Simulator based on MetaWare nSIM
- NPS400 chip based on ASIC
config EZNPS_MTM_EXT
bool "ARC-EZchip MTM Extensions"
select CPUMASK_OFFSTACK
depends on ARC_PLAT_EZNPS && SMP
default y
help
Here we add new hierarchy for CPUs topology.
We got:
Core
Thread
At the new thread level each CPU represent one HW thread.
At highest hierarchy each core contain 16 threads,
any of them seem like CPU from Linux point of view.
All threads within same core share the execution unit of the
core and HW scheduler round robin between them.
config EZNPS_MEM_ERROR_ALIGN
bool "ARC-EZchip Memory error as an exception"
depends on EZNPS_MTM_EXT
default n
help
On the real chip of the NPS, user memory errors are handled
as a machine check exception, which is fatal, whereas on
simulator platform for NPS, is handled as a Level 2 interrupt
(just a stock ARC700) which is recoverable. This option makes
simulator behave like hardware.
config EZNPS_SHARED_AUX_REGS
bool "ARC-EZchip Shared Auxiliary Registers Per Core"
depends on ARC_PLAT_EZNPS
default y
help
On the real chip of the NPS, auxiliary registers are shared between
all the cpus of the core, whereas on simulator platform for NPS,
each cpu has a different set of auxiliary registers. Configuration
should be unset if auxiliary registers are not shared between the cpus
of the core, so there will be a need to initialize them per cpu.
arch/arc/plat-eznps/Makefile deleted 100644 → 0
View file @ 549738f1
# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the linux kernel.
#
obj-y := entry.o platform.o ctop.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_EZNPS_MTM_EXT) += mtm.o
arch/arc/plat-eznps/ctop.c deleted 100644 → 0
View file @ 549738f1
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#include <linux/sched.h>
#include <asm/processor.h>
#include <plat/ctop.h>
void dp_save_restore(struct task_struct *prev, struct task_struct *next)
{
struct eznps_dp *prev_task_dp = &prev->thread.dp;
struct eznps_dp *next_task_dp = &next->thread.dp;
/* Here we save all Data Plane related auxiliary registers */
prev_task_dp->eflags = read_aux_reg(CTOP_AUX_EFLAGS);
write_aux_reg(CTOP_AUX_EFLAGS, next_task_dp->eflags);
prev_task_dp->gpa1 = read_aux_reg(CTOP_AUX_GPA1);
write_aux_reg(CTOP_AUX_GPA1, next_task_dp->gpa1);
}
arch/arc/plat-eznps/entry.S deleted 100644 → 0
View file @ 549738f1
/* SPDX-License-Identifier: GPL-2.0-only */
/*******************************************************************************
EZNPS CPU startup Code
Copyright(c) 2012 EZchip Technologies.
*******************************************************************************/
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/cache.h>
#include <plat/ctop.h>
.cpu A7
.section .init.text, "ax",@progbits
.align 1024 ; HW requierment for restart first PC
ENTRY(res_service)
#if defined(CONFIG_EZNPS_MTM_EXT) && defined(CONFIG_EZNPS_SHARED_AUX_REGS)
; There is no work for HW thread id != 0
lr r3, [CTOP_AUX_THREAD_ID]
cmp r3, 0
jne stext
#endif
#ifdef CONFIG_ARC_HAS_DCACHE
; With no cache coherency mechanism D$ need to be used very carefully.
; Address space:
; 0G-2G: We disable CONFIG_ARC_CACHE_PAGES.
; 2G-3G: We disable D$ by setting this bit.
; 3G-4G: D$ is disabled by architecture.
; FMT are huge pages for user application reside at 0-2G.
; Only FMT left as one who can use D$ where each such page got
; disable/enable bit for cachability.
; Programmer will use FMT pages for private data so cache coherency
; would not be a problem.
; First thing we invalidate D$
sr 1, [ARC_REG_DC_IVDC]
sr HW_COMPLY_KRN_NOT_D_CACHED, [CTOP_AUX_HW_COMPLY]
#endif
#ifdef CONFIG_SMP
; We set logical cpuid to be used by GET_CPUID
; We do not use physical cpuid since we want ids to be continious when
; it comes to cpus on the same quad cluster.
; This is useful for applications that used shared resources of a quad
; cluster such SRAMS.
lr r3, [CTOP_AUX_CORE_ID]
sr r3, [CTOP_AUX_LOGIC_CORE_ID]
lr r3, [CTOP_AUX_CLUSTER_ID]
; Set logical is acheived by swap of 2 middle bits of cluster id (4 bit)
; r3 is used since we use short instruction and we need q-class reg
.short CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST
.word CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM
sr r3, [CTOP_AUX_LOGIC_CLUSTER_ID]
#endif
j stext
END(res_service)
arch/arc/plat-eznps/include/plat/ctop.h deleted 100644 → 0
View file @ 549738f1
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#ifndef _PLAT_EZNPS_CTOP_H
#define _PLAT_EZNPS_CTOP_H
#ifndef CONFIG_ARC_PLAT_EZNPS
#error "Incorrect ctop.h include"
#endif
#include <linux/bits.h>
#include <linux/types.h>
#include <soc/nps/common.h>
/* core auxiliary registers */
#ifdef __ASSEMBLY__
#define CTOP_AUX_BASE (-0x800)
#else
#define CTOP_AUX_BASE 0xFFFFF800
#endif
#define CTOP_AUX_GLOBAL_ID (CTOP_AUX_BASE + 0x000)
#define CTOP_AUX_CLUSTER_ID (CTOP_AUX_BASE + 0x004)
#define CTOP_AUX_CORE_ID (CTOP_AUX_BASE + 0x008)
#define CTOP_AUX_THREAD_ID (CTOP_AUX_BASE + 0x00C)
#define CTOP_AUX_LOGIC_GLOBAL_ID (CTOP_AUX_BASE + 0x010)
#define CTOP_AUX_LOGIC_CLUSTER_ID (CTOP_AUX_BASE + 0x014)
#define CTOP_AUX_LOGIC_CORE_ID (CTOP_AUX_BASE + 0x018)
#define CTOP_AUX_MT_CTRL (CTOP_AUX_BASE + 0x020)
#define CTOP_AUX_HW_COMPLY (CTOP_AUX_BASE + 0x024)
#define CTOP_AUX_DPC (CTOP_AUX_BASE + 0x02C)
#define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030)
#define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080)
#define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C)
#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)
/* EZchip core instructions */
#define CTOP_INST_HWSCHD_WFT_IE12 0x3E6F7344
#define CTOP_INST_HWSCHD_OFF_R4 0x3C6F00BF
#define CTOP_INST_HWSCHD_RESTORE_R4 0x3E6F7103
#define CTOP_INST_SCHD_RW 0x3E6F7004
#define CTOP_INST_SCHD_RD 0x3E6F7084
#define CTOP_INST_ASRI_0_R3 0x3B56003E
#define CTOP_INST_XEX_DI_R2_R2_R3 0x4A664C00
#define CTOP_INST_EXC_DI_R2_R2_R3 0x4A664C01
#define CTOP_INST_AADD_DI_R2_R2_R3 0x4A664C02
#define CTOP_INST_AAND_DI_R2_R2_R3 0x4A664C04
#define CTOP_INST_AOR_DI_R2_R2_R3 0x4A664C05
#define CTOP_INST_AXOR_DI_R2_R2_R3 0x4A664C06
/* Do not use D$ for address in 2G-3G */
#define HW_COMPLY_KRN_NOT_D_CACHED BIT(28)
#define NPS_MSU_EN_CFG 0x80
#define NPS_CRG_BLKID 0x480
#define NPS_CRG_SYNC_BIT BIT(0)
#define NPS_GIM_BLKID 0x5C0
/* GIM registers and fields*/
#define NPS_GIM_UART_LINE BIT(7)
#define NPS_GIM_DBG_LAN_EAST_TX_DONE_LINE BIT(10)
#define NPS_GIM_DBG_LAN_EAST_RX_RDY_LINE BIT(11)
#define NPS_GIM_DBG_LAN_WEST_TX_DONE_LINE BIT(25)
#define NPS_GIM_DBG_LAN_WEST_RX_RDY_LINE BIT(26)
#ifndef __ASSEMBLY__
/* Functional registers definition */
struct nps_host_reg_mtm_cfg {
union {
struct {
u32 gen:1, gdis:1, clk_gate_dis:1, asb:1,
__reserved:9, nat:3, ten:16;
};
u32 value;
};
};
struct nps_host_reg_mtm_cpu_cfg {
union {
struct {
u32 csa:22, dmsid:6, __reserved:3, cs:1;
};
u32 value;
};
};
struct nps_host_reg_thr_init {
union {
struct {
u32 str:1, __reserved:27, thr_id:4;
};
u32 value;
};
};
struct nps_host_reg_thr_init_sts {
union {
struct {
u32 bsy:1, err:1, __reserved:26, thr_id:4;
};
u32 value;
};
};
struct nps_host_reg_msu_en_cfg {
union {
struct {
u32 __reserved1:11,
rtc_en:1, ipc_en:1, gim_1_en:1,
gim_0_en:1, ipi_en:1, buff_e_rls_bmuw:1,
buff_e_alc_bmuw:1, buff_i_rls_bmuw:1, buff_i_alc_bmuw:1,
buff_e_rls_bmue:1, buff_e_alc_bmue:1, buff_i_rls_bmue:1,
buff_i_alc_bmue:1, __reserved2:1, buff_e_pre_en:1,
buff_i_pre_en:1, pmuw_ja_en:1, pmue_ja_en:1,
pmuw_nj_en:1, pmue_nj_en:1, msu_en:1;
};
u32 value;
};
};
struct nps_host_reg_gim_p_int_dst {
union {
struct {
u32 int_out_en:1, __reserved1:4,
is:1, intm:2, __reserved2:4,
nid:4, __reserved3:4, cid:4,
__reserved4:4, tid:4;
};
u32 value;
};
};
/* AUX registers definition */
struct nps_host_reg_aux_dpc {
union {
struct {
u32 ien:1, men:1, hen:1, reserved:29;
};
u32 value;
};
};
struct nps_host_reg_aux_udmc {
union {
struct {
u32 dcp:1, cme:1, __reserved:19, nat:3,
__reserved2:5, dcas:3;
};
u32 value;
};
};
struct nps_host_reg_aux_mt_ctrl {
union {
struct {
u32 mten:1, hsen:1, scd:1, sten:1,
st_cnt:8, __reserved:8,
hs_cnt:8, __reserved1:4;
};
u32 value;
};
};
struct nps_host_reg_aux_hw_comply {
union {
struct {
u32 me:1, le:1, te:1, knc:1, __reserved:28;
};
u32 value;
};
};
struct nps_host_reg_aux_lpc {
union {
struct {
u32 mep:1, __reserved:31;
};
u32 value;
};
};
/* CRG registers */
#define REG_GEN_PURP_0 nps_host_reg_non_cl(NPS_CRG_BLKID, 0x1BF)
/* GIM registers */
#define REG_GIM_P_INT_EN_0 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x100)
#define REG_GIM_P_INT_POL_0 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x110)
#define REG_GIM_P_INT_SENS_0 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x114)
#define REG_GIM_P_INT_BLK_0 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x118)
#define REG_GIM_P_INT_DST_10 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x13A)
#define REG_GIM_P_INT_DST_11 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x13B)
#define REG_GIM_P_INT_DST_25 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x149)
#define REG_GIM_P_INT_DST_26 nps_host_reg_non_cl(NPS_GIM_BLKID, 0x14A)
#else
.macro GET_CPU_ID reg
lr \reg, [CTOP_AUX_LOGIC_GLOBAL_ID]
#ifndef CONFIG_EZNPS_MTM_EXT
lsr \reg, \reg, 4
#endif
.endm
#endif /* __ASSEMBLY__ */
#endif /* _PLAT_EZNPS_CTOP_H */
arch/arc/plat-eznps/include/plat/mtm.h deleted 100644 → 0
View file @ 549738f1
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#ifndef _PLAT_EZNPS_MTM_H
#define _PLAT_EZNPS_MTM_H
#include <plat/ctop.h>
static inline void *nps_mtm_reg_addr(u32 cpu, u32 reg)
{
struct global_id gid;
u32 core, blkid;
gid.value = cpu;
core = gid.core;
blkid = (((core & 0x0C) << 2) | (core & 0x03));
return nps_host_reg(cpu, blkid, reg);
}
#ifdef CONFIG_EZNPS_MTM_EXT
#define NPS_CPU_TO_THREAD_NUM(cpu) \
({ struct global_id gid; gid.value = cpu; gid.thread; })
/* MTM registers */
#define MTM_CFG(cpu) nps_mtm_reg_addr(cpu, 0x81)
#define MTM_THR_INIT(cpu) nps_mtm_reg_addr(cpu, 0x92)
#define MTM_THR_INIT_STS(cpu) nps_mtm_reg_addr(cpu, 0x93)
#define get_thread(map) map.thread
#define eznps_max_cpus 4096
#define eznps_cpus_per_cluster 256
void mtm_enable_core(unsigned int cpu);
int mtm_enable_thread(int cpu);
#else /* !CONFIG_EZNPS_MTM_EXT */
#define get_thread(map) 0
#define eznps_max_cpus 256
#define eznps_cpus_per_cluster 16
#define mtm_enable_core(cpu)
#define mtm_enable_thread(cpu) 1
#define NPS_CPU_TO_THREAD_NUM(cpu) 0
#endif /* CONFIG_EZNPS_MTM_EXT */
#endif /* _PLAT_EZNPS_MTM_H */
arch/arc/plat-eznps/include/plat/smp.h deleted 100644 → 0
View file @ 549738f1
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#ifndef __PLAT_EZNPS_SMP_H
#define __PLAT_EZNPS_SMP_H
#ifdef CONFIG_SMP
extern void res_service(void);
#endif /* CONFIG_SMP */
#endif
arch/arc/plat-eznps/mtm.c deleted 100644 → 0
View file @ 549738f1
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/log2.h>
#include <asm/arcregs.h>
#include <plat/mtm.h>
#include <plat/smp.h>
#define MT_HS_CNT_MIN 0x01
#define MT_HS_CNT_MAX 0xFF
#define MT_CTRL_ST_CNT 0xF
#define NPS_NUM_HW_THREADS 0x10
static int mtm_hs_ctr = MT_HS_CNT_MAX;
#ifdef CONFIG_EZNPS_MEM_ERROR_ALIGN
int do_memory_error(unsigned long address, struct pt_regs *regs)
{
die("Invalid Mem Access", regs, address);
return 1;
}
#endif
static void mtm_init_nat(int cpu)
{
struct nps_host_reg_mtm_cfg mtm_cfg;
struct nps_host_reg_aux_udmc udmc;
int log_nat, nat = 0, i, t;
/* Iterate core threads and update nat */
for (i = 0, t = cpu; i < NPS_NUM_HW_THREADS; i++, t++)
nat += test_bit(t, cpumask_bits(cpu_possible_mask));
log_nat = ilog2(nat);
udmc.value = read_aux_reg(CTOP_AUX_UDMC);
udmc.nat = log_nat;
write_aux_reg(CTOP_AUX_UDMC, udmc.value);
mtm_cfg.value = ioread32be(MTM_CFG(cpu));
mtm_cfg.nat = log_nat;
iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
}
static void mtm_init_thread(int cpu)
{
int i, tries = 5;
struct nps_host_reg_thr_init thr_init;
struct nps_host_reg_thr_init_sts thr_init_sts;
/* Set thread init register */
thr_init.value = 0;
iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
thr_init.thr_id = NPS_CPU_TO_THREAD_NUM(cpu);
thr_init.str = 1;
iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
/* Poll till thread init is done */
for (i = 0; i < tries; i++) {
thr_init_sts.value = ioread32be(MTM_THR_INIT_STS(cpu));
if (thr_init_sts.thr_id == thr_init.thr_id) {
if (thr_init_sts.bsy)
continue;
else if (thr_init_sts.err)
pr_warn("Failed to thread init cpu %u\n", cpu);
break;
}
pr_warn("Wrong thread id in thread init for cpu %u\n", cpu);
break;
}
if (i == tries)
pr_warn("Got thread init timeout for cpu %u\n", cpu);
}
int mtm_enable_thread(int cpu)
{
struct nps_host_reg_mtm_cfg mtm_cfg;
if (NPS_CPU_TO_THREAD_NUM(cpu) == 0)
return 1;
/* Enable thread in mtm */
mtm_cfg.value = ioread32be(MTM_CFG(cpu));
mtm_cfg.ten |= (1 << (NPS_CPU_TO_THREAD_NUM(cpu)));
iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
return 0;
}
void mtm_enable_core(unsigned int cpu)
{
int i;
struct nps_host_reg_aux_mt_ctrl mt_ctrl;
struct nps_host_reg_mtm_cfg mtm_cfg;
struct nps_host_reg_aux_dpc dpc;
/*
* Initializing dpc register in each CPU.
* Overwriting the init value of the DPC
* register so that CMEM and FMT virtual address
* spaces are accessible, and Data Plane HW
* facilities are enabled.
*/
dpc.ien = 1;
dpc.men = 1;
write_aux_reg(CTOP_AUX_DPC, dpc.value);
if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
return;
/* Initialize Number of Active Threads */
mtm_init_nat(cpu);
/* Initialize mtm_cfg */
mtm_cfg.value = ioread32be(MTM_CFG(cpu));
mtm_cfg.ten = 1;
iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
/* Initialize all other threads in core */
for (i = 1; i < NPS_NUM_HW_THREADS; i++)
mtm_init_thread(cpu + i);
/* Enable HW schedule, stall counter, mtm */
mt_ctrl.value = 0;
mt_ctrl.hsen = 1;
mt_ctrl.hs_cnt = mtm_hs_ctr;
mt_ctrl.mten = 1;
write_aux_reg(CTOP_AUX_MT_CTRL, mt_ctrl.value);
/*
* HW scheduling mechanism will start working
* Only after call to instruction "schd.rw".
* cpu_relax() calls "schd.rw" instruction.
*/
cpu_relax();
}
/* Verify and set the value of the mtm hs counter */
static int __init set_mtm_hs_ctr(char *ctr_str)
{
int hs_ctr;
int ret;
ret = kstrtoint(ctr_str, 0, &hs_ctr);
if (ret || hs_ctr > MT_HS_CNT_MAX || hs_ctr < MT_HS_CNT_MIN) {
pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n",
hs_ctr, MT_HS_CNT_MIN, MT_HS_CNT_MAX);
return -EINVAL;
}
mtm_hs_ctr = hs_ctr;
return 0;
}
early_param("nps_mtm_hs_ctr", set_mtm_hs_ctr);
arch/arc/plat-eznps/platform.c deleted 100644 → 0
View file @ 549738f1
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <asm/mach_desc.h>
#include <plat/mtm.h>
static void __init eznps_configure_msu(void)
{
int cpu;
struct nps_host_reg_msu_en_cfg msu_en_cfg = {.value = 0};
msu_en_cfg.msu_en = 1;
msu_en_cfg.ipi_en = 1;
msu_en_cfg.gim_0_en = 1;
msu_en_cfg.gim_1_en = 1;
/* enable IPI and GIM messages on all clusters */
for (cpu = 0 ; cpu < eznps_max_cpus; cpu += eznps_cpus_per_cluster)
iowrite32be(msu_en_cfg.value,
nps_host_reg(cpu, NPS_MSU_BLKID, NPS_MSU_EN_CFG));
}
static void __init eznps_configure_gim(void)
{
u32 reg_value;
u32 gim_int_lines;
struct nps_host_reg_gim_p_int_dst gim_p_int_dst = {.value = 0};
gim_int_lines = NPS_GIM_UART_LINE;
gim_int_lines |= NPS_GIM_DBG_LAN_EAST_TX_DONE_LINE;
gim_int_lines |= NPS_GIM_DBG_LAN_EAST_RX_RDY_LINE;
gim_int_lines |= NPS_GIM_DBG_LAN_WEST_TX_DONE_LINE;
gim_int_lines |= NPS_GIM_DBG_LAN_WEST_RX_RDY_LINE;
/*
* IRQ polarity
* low or high level
* negative or positive edge
*/
reg_value = ioread32be(REG_GIM_P_INT_POL_0);
reg_value &= ~gim_int_lines;
iowrite32be(reg_value, REG_GIM_P_INT_POL_0);
/* IRQ type level or edge */
reg_value = ioread32be(REG_GIM_P_INT_SENS_0);
reg_value |= NPS_GIM_DBG_LAN_EAST_TX_DONE_LINE;
reg_value |= NPS_GIM_DBG_LAN_WEST_TX_DONE_LINE;
iowrite32be(reg_value, REG_GIM_P_INT_SENS_0);
/*
* GIM interrupt select type for
* dbg_lan TX and RX interrupts
* should be type 1
* type 0 = IRQ line 6
* type 1 = IRQ line 7
*/
gim_p_int_dst.is = 1;
iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_10);
iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_11);
iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_25);
iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_26);
/*
* CTOP IRQ lines should be defined
* as blocking in GIM
*/
iowrite32be(gim_int_lines, REG_GIM_P_INT_BLK_0);
/* enable CTOP IRQ lines in GIM */
iowrite32be(gim_int_lines, REG_GIM_P_INT_EN_0);
}
static void __init eznps_early_init(void)
{
eznps_configure_msu();
eznps_configure_gim();
}
static const char *eznps_compat[] __initconst = {
"ezchip,arc-nps",
NULL,
};
MACHINE_START(NPS, "nps")
.dt_compat = eznps_compat,
.init_early = eznps_early_init,
MACHINE_END
arch/arc/plat-eznps/smp.c deleted 100644 → 0
View file @ 549738f1
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*/
#include <linux/smp.h>
#include <linux/of_fdt.h>
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <asm/irq.h>
#include <plat/ctop.h>
#include <plat/smp.h>
#include <plat/mtm.h>
#define NPS_DEFAULT_MSID 0x34
#define NPS_MTM_CPU_CFG 0x90
static char smp_cpuinfo_buf[128] = {"Extn [EZNPS-SMP]\t: On\n"};
/* Get cpu map from device tree */
static int __init eznps_get_map(const char *name, struct cpumask *cpumask)
{
unsigned long dt_root = of_get_flat_dt_root();
const char *buf;
buf = of_get_flat_dt_prop(dt_root, name, NULL);
if (!buf)
return 1;
cpulist_parse(buf, cpumask);
return 0;
}
/* Update board cpu maps */
static void __init eznps_init_cpumasks(void)
{
struct cpumask cpumask;
if (eznps_get_map("present-cpus", &cpumask)) {
pr_err("Failed to get present-cpus from dtb");
return;
}
init_cpu_present(&cpumask);
if (eznps_get_map("possible-cpus", &cpumask)) {
pr_err("Failed to get possible-cpus from dtb");
return;
}
init_cpu_possible(&cpumask);
}
static void eznps_init_core(unsigned int cpu)
{
u32 sync_value;
struct nps_host_reg_aux_hw_comply hw_comply;
struct nps_host_reg_aux_lpc lpc;
if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
return;
hw_comply.value = read_aux_reg(CTOP_AUX_HW_COMPLY);
hw_comply.me = 1;
hw_comply.le = 1;
hw_comply.te = 1;
write_aux_reg(CTOP_AUX_HW_COMPLY, hw_comply.value);
/* Enable MMU clock */
lpc.mep = 1;
write_aux_reg(CTOP_AUX_LPC, lpc.value);
/* Boot CPU only */
if (!cpu) {
/* Write to general purpose register in CRG */
sync_value = ioread32be(REG_GEN_PURP_0);
sync_value |= NPS_CRG_SYNC_BIT;
iowrite32be(sync_value, REG_GEN_PURP_0);
}
}
/*
* Master kick starting another CPU
*/
static void __init eznps_smp_wakeup_cpu(int cpu, unsigned long pc)
{
struct nps_host_reg_mtm_cpu_cfg cpu_cfg;
if (mtm_enable_thread(cpu) == 0)
return;
/* set PC, dmsid, and start CPU */
cpu_cfg.value = (u32)res_service;
cpu_cfg.dmsid = NPS_DEFAULT_MSID;
cpu_cfg.cs = 1;
iowrite32be(cpu_cfg.value, nps_mtm_reg_addr(cpu, NPS_MTM_CPU_CFG));
}
static void eznps_ipi_send(int cpu)
{
struct global_id gid;
struct {
union {
struct {
u32 num:8, cluster:8, core:8, thread:8;
};
u32 value;
};
} ipi;
gid.value = cpu;
ipi.thread = get_thread(gid);
ipi.core = gid.core;
ipi.cluster = nps_cluster_logic_to_phys(gid.cluster);
ipi.num = NPS_IPI_IRQ;
__asm__ __volatile__(
" mov r3, %0\n"
" .word %1\n"
:
: "r"(ipi.value), "i"(CTOP_INST_ASRI_0_R3)
: "r3");
}
static void eznps_init_per_cpu(int cpu)
{
smp_ipi_irq_setup(cpu, NPS_IPI_IRQ);
eznps_init_core(cpu);
mtm_enable_core(cpu);
}
struct plat_smp_ops plat_smp_ops = {
.info = smp_cpuinfo_buf,
.init_early_smp = eznps_init_cpumasks,
.cpu_kick = eznps_smp_wakeup_cpu,
.ipi_send = eznps_ipi_send,
.init_per_cpu = eznps_init_per_cpu,
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7