Commit ddb22195 authored by Jouni Hogander's avatar Jouni Hogander Committed by Linus Torvalds

spi: omap2_mcspi supports wake events

Currently mcspi wake-ups are not enabled.  This might cause cases where
OMAP is not waking up on mcspi events.
Signed-off-by: default avatarJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent c42b110c
...@@ -59,6 +59,8 @@ ...@@ -59,6 +59,8 @@
/* per-register bitmasks: */ /* per-register bitmasks: */
#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0) #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1) #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
...@@ -90,6 +92,7 @@ ...@@ -90,6 +92,7 @@
#define OMAP2_MCSPI_CHCTRL_EN (1 << 0) #define OMAP2_MCSPI_CHCTRL_EN (1 << 0)
#define OMAP2_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
/* We have 2 DMA channels per CS, one for RX and one for TX */ /* We have 2 DMA channels per CS, one for RX and one for TX */
struct omap2_mcspi_dma { struct omap2_mcspi_dma {
...@@ -873,8 +876,12 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi) ...@@ -873,8 +876,12 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi)
} while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE)); } while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
/* (3 << 8) | (2 << 3) | */ OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
OMAP2_MCSPI_SYSCONFIG_AUTOIDLE); OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
omap2_mcspi_set_master_mode(master); omap2_mcspi_set_master_mode(master);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment