V4L/DVB (6431): Improve firmware format

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/tuner-xc2028-types.h

+/* tuner-xc2028_types
+ *
+ * Copyright (c) 2007 Mauro Carvalho Chehab (mchehab@infradead.org)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+/* xc3028 firmware types */
+
+/* BASE firmware should be loaded before any other firmware */
+#define BASE		(1<<0)
+
+/* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */
+#define F8MHZ		(1<<1)
+
+/* Multichannel Television Sound (MTS)
+   Those firmwares are capable of using xc2038 DSP to decode audio and
+   produce a baseband audio output on some pins of the chip.
+   There are MTS firmwares for the most used video standards. It should be
+   required to use MTS firmwares, depending on the way audio is routed into
+   the bridge chip
+ */
+#define MTS		(1<<2)
+
+/* FIXME: I have no idea what's the difference between
+   D2620 and D2633 firmwares
+ */
+#define D2620		(1<<3)
+#define D2633		(1<<4)
+
+/* DTV firmwares for 6, 7 and 8 MHz
+   DTV6 - 6MHz - ATSC/DVB-C/DVB-T/ISDB-T/DOCSIS
+   DTV8 - 8MHz - DVB-C/DVB-T
+ */
+#define DTV6_ATSC	(1<<5)
+#define DTV6_QAM	(1<<6)
+#define DTV7		(1<<7)
+#define DTV78		(1<<8)
+#define DTV8		(1<<9)
+
+/* There's a FM | BASE firmware + FM specific firmware (std=0) */
+#define	FM		(1<<10)
+
+/* Applies only for FM firmware
+   Makes it use RF input 1 (pin #2) instead of input 2 (pin #4)
+ */
+#define INPUT1		(1<<11)
+
+
+/* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
+	and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
+	There are variants both with and without NOGD
+ */
+#define LCD		(1<<12)
+
+/* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
+	and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
+ */
+#define NOGD		(1<<13)
+
+/* Old firmwares were broken into init0 and init1 */
+#define INIT1		(1<<14)
+
+/* Newer types to be moved to videodev2.h */
+
+#define V4L2_STD_SECAM_K3	(0x02000000)
+
+/* Audio types */
+
+#define V4L2_STD_A2_A		(1L<<32)
+#define V4L2_STD_A2_B		(1L<<33)
+#define V4L2_STD_NICAM_A	(1L<<34)
+#define V4L2_STD_NICAM_B	(1L<<35)
+#define V4L2_STD_AM		(1L<<36)
+#define V4L2_STD_BTSC		(1L<<37)
+#define V4L2_STD__EIAJ		(1L<<38)
+
+#define V4L2_STD_A2		(V4L2_STD_A2_A    | V4L2_STD_A2_B)
+#define V4L2_STD_NICAM		(V4L2_STD_NICAM_A | V4L2_STD_NICAM_B)
+
+/* To preserve backward compatibilty,
+   (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported
+ */
+
+#define V4L2_STD_AUDIO		(V4L2_STD_A2    | \
+				 V4L2_STD_NICAM | \
+				 V4L2_STD_AM    | \
+				 V4L2_STD_BTSC  | \
+				 V4L2_STD_EIAJ)
+
+/* Used standards with audio restrictions */
+
+#define V4L2_STD_PAL_BG_A2_A	(V4L2_STD_PAL_BG | V4L2_STD_A2_A)
+#define V4L2_STD_PAL_BG_A2_B	(V4L2_STD_PAL_BG | V4L2_STD_A2_B)
+#define V4L2_STD_PAL_BG_NICAM_A	(V4L2_STD_PAL_BG | V4L2_STD_NICAM_A)
+#define V4L2_STD_PAL_BG_NICAM_B	(V4L2_STD_PAL_BG | V4L2_STD_NICAM_B)
+#define V4L2_STD_PAL_DK_A2	(V4L2_STD_PAL_DK | V4L2_STD_A2)
+#define V4L2_STD_PAL_DK_NICAM	(V4L2_STD_PAL_DK | V4L2_STD_NICAM)
+#define V4L2_STD_SECAM_L_NICAM	(V4L2_STD_SECAM_L | V4L2_STD_NICAM)
+#define V4L2_STD_SECAM_L_AM	(V4L2_STD_SECAM_L | V4L2_STD_AM)

drivers/media/video/tuner-xc2028.h

@@ -9,13 +9,22 @@
 
 #include "dvb_frontend.h"
 
+#define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw"
+
+enum xc2028_firm_type {
+	XC2028_FIRM_NORMAL,
+	XC2028_FIRM_MTS,
+};
+
+struct xc2028_ctrl {
+	enum xc2028_firm_type	type;
+	char			*fname;
+};
+
 /* xc2028 commands for callback */
 #define XC2028_TUNER_RESET	0
 #define XC2028_RESET_CLK	1
 
-struct dvb_frontend;
-struct i2c_client;
-
 #if defined(CONFIG_TUNER_XC2028) || (defined(CONFIG_TUNER_XC2028_MODULE) && defined(MODULE))
 int xc2028_attach(struct dvb_frontend *fe, struct i2c_adapter* i2c_adap,
 		  u8 i2c_addr, struct device *dev, void *video_dev,