Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

Pull microblaze update from Michal Simek:
 "This fixes noMMU kernel and I have also added defconfig updates which
  fix issue with one external dependency and enable all xilinx device
  drivers for 0-day testing system.

  Additionally wire up finit_module system call, and do highmem fixup
  and pci warnings reported by the 0-day testing system"

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Update microblaze defconfigs
  microblaze: Fix pci compilation and sparse warnings
  microblaze: Add finit_module syscall
  microblaze: Kill __kmap_atomic()
  microblaze: Change section flags for noMMU
  microblaze: Microblaze wants sys_fork for noMMU too

arch/microblaze/configs/mmu_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
 # CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
 CONFIG_OPT_LIB_ASM=y
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
@@ -31,39 +28,62 @@ CONFIG_HZ_100=y
 CONFIG_MMU=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE_FORCE=y
+CONFIG_HIGHMEM=y
+CONFIG_PCI=y
+CONFIG_PCI_XILINX=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_MTD=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_XILINX_EMACLITE=y
+CONFIG_XILINX_LL_TEMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_XILINX_HWICAP=y
+CONFIG_I2C=y
+CONFIG_I2C_XILINX=y
+CONFIG_SPI=y
+CONFIG_SPI_XILINX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_XILINX=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_UIO_DMEM_GENIRQ=y
 CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_EARLY_PRINTK=y
+CONFIG_KEYS=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/microblaze/configs/nommu_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
 # CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_OPT_LIB_FUNCTION is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
 CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
 CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
 CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_BINFMT_FLAT=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_PCI=y
+CONFIG_PCI_XILINX=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -45,41 +46,55 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_XILINX_LL_TEMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_XILINX_HWICAP=y
+CONFIG_I2C=y
+CONFIG_I2C_XILINX=y
+CONFIG_SPI=y
+CONFIG_SPI_XILINX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_XILINX=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_UIO_DMEM_GENIRQ=y
 CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
+CONFIG_NLS=y
 CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_SELFTEST=y
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_SG=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_KEYS=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRC32 is not set

arch/microblaze/include/asm/highmem.h

@@ -71,7 +71,7 @@ static inline void kunmap(struct page *page)
 	kunmap_high(page);
 }
 
-static inline void *__kmap_atomic(struct page *page)
+static inline void *kmap_atomic(struct page *page)
 {
 	return kmap_atomic_prot(page, kmap_prot);
 }

arch/microblaze/include/asm/uaccess.h

@@ -108,7 +108,7 @@ static inline int ___range_ok(unsigned long addr, unsigned long size)
 # define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
 #else
 # define __FIXUP_SECTION	".section .discard,\"ax\"\n"
-# define __EX_TABLE_SECTION	".section .discard,\"a\"\n"
+# define __EX_TABLE_SECTION	".section .discard,\"ax\"\n"
 #endif
 
 extern unsigned long __copy_tofrom_user(void __user *to,

arch/microblaze/include/asm/unistd.h

@@ -37,9 +37,7 @@
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
 #define __ARCH_WANT_SYS_CLONE
 #define __ARCH_WANT_SYS_VFORK
-#ifdef CONFIG_MMU
 #define __ARCH_WANT_SYS_FORK
-#endif
 
 /*
  * "Conditional" syscalls

arch/microblaze/include/uapi/asm/unistd.h

@@ -395,7 +395,8 @@
 #define __NR_process_vm_readv	377
 #define __NR_process_vm_writev	378
 #define __NR_kcmp		379
+#define __NR_finit_module	380
 
-#define __NR_syscalls		380
+#define __NR_syscalls		381
 
 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */

arch/microblaze/kernel/syscall_table.S

@@ -380,3 +380,4 @@ ENTRY(sys_call_table)
 	.long sys_process_vm_readv
 	.long sys_process_vm_writev
 	.long sys_kcmp
+	.long sys_finit_module

arch/microblaze/pci/pci-common.c

@@ -287,7 +287,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 	unsigned long io_offset = 0;
 	int i, res_bit;
 
-	if (hose == 0)
+	if (!hose)
 		return NULL;		/* should never happen */
 
 	/* If memory, add on the PCI bridge address offset */
@@ -821,8 +821,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
 	return 0;
 }
 
@@ -1123,7 +1121,7 @@ static int __init reparent_resources(struct resource *parent,
  *	    as well.
  */
 
-void pcibios_allocate_bus_resources(struct pci_bus *bus)
+static void pcibios_allocate_bus_resources(struct pci_bus *bus)
 {
 	struct pci_bus *b;
 	int i;
@@ -1178,7 +1176,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 		}
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
-clear_resource:
+
 		res->start = res->end = 0;
 		res->flags = 0;
 	}
@@ -1433,7 +1431,8 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		res->end = res->start + IO_SPACE_LIMIT;
 		res->flags = IORESOURCE_IO;
 	}
-	pci_add_resource_offset(resources, res, hose->io_base_virt - _IO_BASE);
+	pci_add_resource_offset(resources, res,
+		(__force resource_size_t)(hose->io_base_virt - _IO_BASE));
 
 	pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
 		 (unsigned long long)res->start,