Skip to content

L
linux
Commit df694daa authored by Kailang Yang's avatar Kailang Yang Committed by Jaroslav Kysela
Browse files
Options

[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861 

Modules: HDA Codec driver,HDA generic driver

This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver
More models and improvements for ALC880, ALC260 and ALC882 codecs, too.
Signed-off-by: default avatarKailang Yang <kailang@realtek.com.tw>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 59acf76e
Show whitespace changes
Inline Side-by-side
Showing with 2215 additions and 213 deletions
sound/pci/hda/hda_codec.c
View file @ df694daa
......@@ -1926,8 +1926,18 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, struct hda_multi_o
/*
* Helper for automatic ping configuration
*/
static int is_in_nid_list(hda_nid_t nid, hda_nid_t *list)
{
for (; *list; list++)
if (*list == nid)
return 1;
return 0;
}
/* parse all pin widgets and store the useful pin nids to cfg */
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg)
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg,
hda_nid_t *ignore_nids)
{
hda_nid_t nid, nid_start;
int i, j, nodes;
......@@ -1948,6 +1958,10 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *c
/* read all default configuration for pin complex */
if (wid_type != AC_WID_PIN)
continue;
/* ignore the given nids (e.g. pc-beep returns error) */
if (ignore_nids && is_in_nid_list(nid, ignore_nids))
continue;
def_conf = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
......
sound/pci/hda/hda_local.h
View file @ df694daa
......@@ -213,7 +213,7 @@ enum {
struct auto_pin_cfg {
int line_outs;
hda_nid_t line_out_pins[4]; /* sorted in the order of Front/Surr/CLFE/Side */
hda_nid_t line_out_pins[5]; /* sorted in the order of Front/Surr/CLFE/Side */
hda_nid_t speaker_pin;
hda_nid_t hp_pin;
hda_nid_t input_pins[AUTO_PIN_LAST];
......@@ -227,7 +227,8 @@ struct auto_pin_cfg {
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
#define get_defcfg_device(cfg) ((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg);
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg,
hda_nid_t *ignore_nids);
/* amp values */
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
......
sound/pci/hda/patch_analog.c
View file @ df694daa
......@@ -1968,7 +1968,7 @@ static int ad1988_parse_auto_config(struct hda_codec *codec)
struct ad198x_spec *spec = codec->spec;
int err;
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL)) < 0)
return err;
if ((err = ad1988_auto_fill_dac_nids(codec, &spec->autocfg)) < 0)
return err;
......
sound/pci/hda/patch_cmedia.c
View file @ df694daa
......@@ -711,7 +711,7 @@ static int patch_cmi9880(struct hda_codec *codec)
spec->dig_in_nid = CMI_DIG_IN_NID;
spec->multiout.max_channels = 8;
}
snd_hda_parse_pin_def_config(codec, &cfg);
snd_hda_parse_pin_def_config(codec, &cfg, NULL);
if (cfg.line_outs) {
spec->multiout.max_channels = cfg.line_outs * 2;
cmi9880_fill_multi_dac_nids(codec, &cfg);
......
sound/pci/hda/patch_realtek.c
View file @ df694daa
......@@ -3,7 +3,8 @@
*
* HD audio interface patch for ALC 260/880/882 codecs
*
* Copyright (c) 2004 PeiSen Hou <pshou@realtek.com.tw>
* Copyright (c) 2004 Kailang Yang <kailang@realtek.com.tw>
* PeiSen Hou <pshou@realtek.com.tw>
* Takashi Iwai <tiwai@suse.de>
*
* This driver is free software; you can redistribute it and/or modify
......@@ -39,17 +40,20 @@ enum {
ALC880_5ST_DIG,
ALC880_W810,
ALC880_Z71V,
ALC880_AUTO,
ALC880_6ST,
ALC880_6ST_DIG,
ALC880_F1734,
ALC880_ASUS,
ALC880_ASUS_DIG,
ALC880_ASUS_W1V,
ALC880_ASUS_DIG2,
ALC880_UNIWILL_DIG,
ALC880_CLEVO,
ALC880_TCL_S700,
#ifdef CONFIG_SND_DEBUG
ALC880_TEST,
#endif
ALC880_AUTO,
ALC880_MODEL_LAST /* last tag */
};
......@@ -57,16 +61,45 @@ enum {
enum {
ALC260_BASIC,
ALC260_HP,
ALC260_FUJITSU_S702x,
ALC260_HP_3013,
ALC260_FUJITSU_S702X,
ALC260_AUTO,
ALC260_MODEL_LAST /* last tag */
};
/* ALC262 models */
enum {
ALC262_BASIC,
ALC262_AUTO,
ALC262_MODEL_LAST /* last tag */
};
/* ALC861 models */
enum {
ALC861_3ST,
ALC861_3ST_DIG,
ALC861_6ST_DIG,
ALC861_AUTO,
ALC861_MODEL_LAST,
};
/* ALC882 models */
enum {
ALC882_3ST_DIG,
ALC882_6ST_DIG,
ALC882_AUTO,
ALC882_MODEL_LAST,
};
/* for GPIO Poll */
#define GPIO_MASK 0x03
struct alc_spec {
/* codec parameterization */
struct snd_kcontrol_new *mixers[3]; /* mixer arrays */
struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
unsigned int num_mixers;
const struct hda_verb *init_verbs[3]; /* initialization verbs
const struct hda_verb *init_verbs[5]; /* initialization verbs
* don't forget NULL termination!
*/
unsigned int num_init_verbs;
......@@ -106,7 +139,25 @@ struct alc_spec {
unsigned int num_kctl_alloc, num_kctl_used;
struct snd_kcontrol_new *kctl_alloc;
struct hda_input_mux private_imux;
hda_nid_t private_dac_nids[4];
hda_nid_t private_dac_nids[5];
};
/*
* configuration template - to be copied to the spec instance
*/
struct alc_config_preset {
struct snd_kcontrol_new *mixers[5]; /* should be identical size with spec */
const struct hda_verb *init_verbs[5];
unsigned int num_dacs;
hda_nid_t *dac_nids;
hda_nid_t dig_out_nid; /* optional */
hda_nid_t hp_nid; /* optional */
unsigned int num_adc_nids;
hda_nid_t *adc_nids;
hda_nid_t dig_in_nid;
unsigned int num_channel_mode;
const struct hda_channel_mode *channel_mode;
const struct hda_input_mux *input_mux;
};
......@@ -143,7 +194,7 @@ static int alc_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_v
/*
* channel mode setting
*/
static int alc880_ch_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
static int alc_ch_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
......@@ -151,7 +202,7 @@ static int alc880_ch_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_ele
spec->num_channel_mode);
}
static int alc880_ch_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
static int alc_ch_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
......@@ -159,7 +210,7 @@ static int alc880_ch_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem
spec->num_channel_mode, spec->multiout.max_channels);
}
static int alc880_ch_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
......@@ -217,6 +268,36 @@ static int alc_pinctl_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e
.put = alc_pinctl_switch_put, \
.private_value = (nid) | (mask<<16) }
/*
* set up from the preset table
*/
static void setup_preset(struct alc_spec *spec, const struct alc_config_preset *preset)
{
int i;
for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
spec->mixers[spec->num_mixers++] = preset->mixers[i];
for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i]; i++)
spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = preset->num_dacs;
spec->multiout.dac_nids = preset->dac_nids;
spec->multiout.dig_out_nid = preset->dig_out_nid;
spec->multiout.hp_nid = preset->hp_nid;
spec->input_mux = preset->input_mux;
spec->num_adc_nids = preset->num_adc_nids;
spec->adc_nids = preset->adc_nids;
spec->dig_in_nid = preset->dig_in_nid;
}
/*
* ALC880 3-stack model
*
......@@ -237,6 +318,7 @@ static hda_nid_t alc880_adc_nids[3] = {
/* The datasheet says the node 0x07 is connected from inputs,
* but it shows zero connection in the real implementation on some devices.
* Note: this is a 915GAV bug, fixed on 915GLV
*/
static hda_nid_t alc880_adc_nids_alt[2] = {
/* ADC1-2 */
......@@ -307,9 +389,9 @@ static struct snd_kcontrol_new alc880_three_stack_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
},
{ } /* end */
};
......@@ -452,9 +534,9 @@ static struct snd_kcontrol_new alc880_six_stack_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
},
{ } /* end */
};
......@@ -596,9 +678,9 @@ static struct snd_kcontrol_new alc880_asus_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
},
{ } /* end */
};
......@@ -626,6 +708,33 @@ static struct snd_kcontrol_new alc880_pcbeep_mixer[] = {
{ } /* end */
};
/* TCL S700 */
static struct snd_kcontrol_new alc880_tcl_s700_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0B, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0B, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0B, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0B, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
/*
* build control elements
*/
......@@ -925,6 +1034,8 @@ static struct hda_verb alc880_gpio1_init_verbs[] = {
{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
{ }
};
/* Enable GPIO mask and set output */
......@@ -932,8 +1043,59 @@ static struct hda_verb alc880_gpio2_init_verbs[] = {
{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
{0x01, AC_VERB_SET_GPIO_DATA, 0x02},
{ }
};
/* Clevo m520g init */
static struct hda_verb alc880_pin_clevo_init_verbs[] = {
/* headphone output */
{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
/* line-out */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Line-in */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* CD */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Mic1 (rear panel) */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Mic2 (front panel) */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* headphone */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* change to EAPD mode */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
{0x20, AC_VERB_SET_PROC_COEF, 0x3060},
{ }
};
static struct hda_verb alc880_pin_tcl_S700_init_verbs[] = {
/* Headphone output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
/* Front output*/
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* change to EAPD mode */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
{0x20, AC_VERB_SET_PROC_COEF, 0x3070},
{ }
};
/*
*/
......@@ -1344,9 +1506,9 @@ static struct snd_kcontrol_new alc880_test_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc880_ch_mode_info,
.get = alc880_ch_mode_get,
.put = alc880_ch_mode_put,
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
},
{ } /* end */
};
......@@ -1442,6 +1604,8 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4038, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4040, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4041, .config = ALC880_3ST },
/* TCL S700 */
{ .pci_subvendor = 0x19db, .pci_subdevice = 0x4188, .config = ALC880_TCL_S700 },
/* Back 3 jack, front 2 jack (Internal add Aux-In) */
{ .pci_subvendor = 0x1025, .pci_subdevice = 0xe310, .config = ALC880_3ST },
......@@ -1452,6 +1616,8 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .modelname = "3stack-digout", .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG },
/* Clevo m520G NB */
{ .pci_subvendor = 0x1558, .pci_subdevice = 0x0520, .config = ALC880_CLEVO },
/* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG },
......@@ -1489,6 +1655,7 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_Z71V },
{ .modelname = "6stack", .config = ALC880_6ST },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81b4, .config = ALC880_6ST },
{ .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_6ST }, /* Acer APFV */
{ .modelname = "6stack-digout", .config = ALC880_6ST_DIG },
......@@ -1496,6 +1663,10 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .pci_subvendor = 0x8086, .pci_subdevice = 0x2668, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x1039, .pci_subdevice = 0x1234, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0077, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0078, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0087, .config = ALC880_6ST_DIG },
{ .modelname = "asus", .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
......@@ -1509,37 +1680,26 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1123, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1143, .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x10b3, .config = ALC880_ASUS_W1V },
{ .pci_subvendor = 0x1558, .pci_subdevice = 0x5401, .config = ALC880_ASUS_DIG2 },
{ .modelname = "uniwill", .config = ALC880_UNIWILL_DIG },
{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9050, .config = ALC880_UNIWILL_DIG },
{ .modelname = "F1734", .config = ALC880_F1734 },
{ .pci_subvendor = 0x1734, .pci_subdevice = 0x107c, .config = ALC880_F1734 },
{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9054, .config = ALC880_F1734 },
#ifdef CONFIG_SND_DEBUG
{ .modelname = "test", .config = ALC880_TEST },
#endif
{ .modelname = "auto", .config = ALC880_AUTO },
{}
};
/*
* configuration template - to be copied to the spec instance
* ALC880 codec presets
*/
struct alc_config_preset {
struct snd_kcontrol_new *mixers[4];
const struct hda_verb *init_verbs[4];
unsigned int num_dacs;
hda_nid_t *dac_nids;
hda_nid_t dig_out_nid; /* optional */
hda_nid_t hp_nid; /* optional */
unsigned int num_adc_nids;
hda_nid_t *adc_nids;
unsigned int num_channel_mode;
const struct hda_channel_mode *channel_mode;
const struct hda_input_mux *input_mux;
};
static struct alc_config_preset alc880_presets[] = {
[ALC880_3ST] = {
.mixers = { alc880_three_stack_mixer },
......@@ -1560,6 +1720,18 @@ static struct alc_config_preset alc880_presets[] = {
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_TCL_S700] = {
.mixers = { alc880_tcl_s700_mixer },
.init_verbs = { alc880_volume_init_verbs,
alc880_pin_tcl_S700_init_verbs,
alc880_gpio2_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_5ST] = {
.mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer},
.init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
......@@ -1651,6 +1823,17 @@ static struct alc_config_preset alc880_presets[] = {
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_DIG2] = {
.mixers = { alc880_asus_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
alc880_gpio2_init_verbs }, /* use GPIO2 */
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_W1V] = {
.mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
......@@ -1672,6 +1855,17 @@ static struct alc_config_preset alc880_presets[] = {
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_CLEVO] = {
.mixers = { alc880_three_stack_mixer },
.init_verbs = { alc880_volume_init_verbs,
alc880_pin_clevo_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
#ifdef CONFIG_SND_DEBUG
[ALC880_TEST] = {
.mixers = { alc880_test_mixer },
......@@ -1783,7 +1977,8 @@ static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pi
}
/* add playback controls from the parsed DAC table */
static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
char name[32];
static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
......@@ -1871,35 +2066,38 @@ static int alc880_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
}
/* create input playback/capture controls for the given pin */
static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname)
static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname,
int idx, hda_nid_t mix_nid)
{
char name[32];
int err, idx;
int err;
sprintf(name, "%s Playback Volume", ctlname);
idx = alc880_input_pin_idx(pin);
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
return err;
sprintf(name, "%s Playback Switch", ctlname);
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
return err;
return 0;
}
/* create playback/capture controls for input pins */
static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
static char *labels[AUTO_PIN_LAST] = {
"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
};
struct hda_input_mux *imux = &spec->private_imux;
int i, err;
int i, err, idx;
for (i = 0; i < AUTO_PIN_LAST; i++) {
if (alc880_is_input_pin(cfg->input_pins[i])) {
err = new_analog_input(spec, cfg->input_pins[i], labels[i]);
idx = alc880_input_pin_idx(cfg->input_pins[i]);
err = new_analog_input(spec, cfg->input_pins[i], labels[i],
idx, 0x0b);
if (err < 0)
return err;
imux->items[imux->num_items].label = labels[i];
......@@ -1910,7 +2108,8 @@ static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const str
return 0;
}
static void alc880_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type,
static void alc880_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
int dac_idx)
{
/* set as output */
......@@ -1973,15 +2172,17 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc880_ignore[] = { 0x1d, 0 };
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
return err;
if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0)
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc880_ignore)) < 0)
return err;
if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
! spec->autocfg.hp_pin)
return 0; /* can't find valid BIOS pin config */
if ((err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
(err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pin,
"Speaker")) < 0 ||
(err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pin,
......@@ -2024,7 +2225,7 @@ static int patch_alc880(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
int i, err;
int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
......@@ -2050,36 +2251,8 @@ static int patch_alc880(struct hda_codec *codec)
}
}
if (board_config != ALC880_AUTO) {
/* set up from the preset table */
const struct alc_config_preset *preset;
preset = &alc880_presets[board_config];
for (i = 0; preset->mixers[i]; i++) {
snd_assert(spec->num_mixers < ARRAY_SIZE(spec->mixers), break);
spec->mixers[spec->num_mixers++] = preset->mixers[i];
}
for (i = 0; preset->init_verbs[i]; i++) {
snd_assert(spec->num_init_verbs < ARRAY_SIZE(spec->init_verbs), break);
spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
}
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = preset->num_dacs;
spec->multiout.dac_nids = preset->dac_nids;
spec->multiout.dig_out_nid = preset->dig_out_nid;
spec->multiout.hp_nid = preset->hp_nid;
spec->input_mux = preset->input_mux;
spec->num_adc_nids = preset->num_adc_nids;
spec->adc_nids = preset->adc_nids;
}
if (board_config != ALC880_AUTO)
setup_preset(spec, &alc880_presets[board_config]);
spec->stream_name_analog = "ALC880 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
......@@ -2128,11 +2301,16 @@ static hda_nid_t alc260_adc_nids[1] = {
0x04,
};
static hda_nid_t alc260_hp_adc_nids[1] = {
static hda_nid_t alc260_adc_nids_alt[1] = {
/* ADC1 */
0x05,
};
static hda_nid_t alc260_hp_adc_nids[2] = {
/* ADC1, 0 */
0x05, 0x04
};
#define ALC260_DIGOUT_NID 0x03
#define ALC260_DIGIN_NID 0x06
......@@ -2167,38 +2345,26 @@ static struct hda_channel_mode alc260_modes[1] = {
{ 2, NULL },
};
static struct snd_kcontrol_new alc260_base_mixer[] = {
/* Mixer combinations
*
* basic: base_output + input + pc_beep + capture
* HP: base_output + input + capture_alt
* HP_3013: hp_3013 + input + capture
* fujitsu: fujitsu + capture
*/
static struct snd_kcontrol_new alc260_base_output_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static struct snd_kcontrol_new alc260_hp_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
static struct snd_kcontrol_new alc260_input_mixer[] = {
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
......@@ -2207,19 +2373,24 @@ static struct snd_kcontrol_new alc260_hp_mixer[] = {
HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static struct snd_kcontrol_new alc260_pc_beep_mixer[] = {
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
{ } /* end */
};
static struct snd_kcontrol_new alc260_hp_3013_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("iSpeaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("iSpeaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
{ } /* end */
};
......@@ -2235,11 +2406,43 @@ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT),
{ } /* end */
};
/* capture mixer elements */
static struct snd_kcontrol_new alc260_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x05, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x05, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static struct snd_kcontrol_new alc260_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
......@@ -2247,6 +2450,9 @@ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
{ } /* end */
};
/*
* initialization verbs
*/
static struct hda_verb alc260_init_verbs[] = {
/* Line In pin widget for input */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
......@@ -2308,14 +2514,108 @@ static struct hda_verb alc260_init_verbs[] = {
{ }
};
/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
* laptops.
*/
static struct hda_verb alc260_fujitsu_init_verbs[] = {
/* Disable all GPIOs */
{0x01, AC_VERB_SET_GPIO_MASK, 0},
/* Internal speaker is connected to headphone pin */
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
static struct hda_verb alc260_hp_init_verbs[] = {
/* Headphone and output */
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
/* mono output */
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Line In pin widget for input */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Line-2 pin widget for output */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* CD pin widget for input */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* unmute amp left and right */
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to line in (default select for this ADC) */
{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
/* unmute Line-Out mixer amp left and right (volume = 0) */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* unmute HP mixer amp left and right (volume = 0) */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
/* unmute CD */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Headphone out path */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Mono out path */
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{ }
};
static struct hda_verb alc260_hp_3013_init_verbs[] = {
/* Line out and output */
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* mono output */
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Line In pin widget for input */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Headphone pin widget for output */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
/* CD pin widget for input */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* unmute amp left and right */
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to line in (default select for this ADC) */
{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
/* unmute Line-Out mixer amp left and right (volume = 0) */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* unmute HP mixer amp left and right (volume = 0) */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
/* unmute CD */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
/* Unmute Front out path */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Headphone out path */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
/* Unmute Mono out path */
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{ }
};
/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
* laptops.
*/
static struct hda_verb alc260_fujitsu_init_verbs[] = {
/* Disable all GPIOs */
{0x01, AC_VERB_SET_GPIO_MASK, 0},
/* Internal speaker is connected to headphone pin */
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
/* Headphone/Line-out jack connects to Line1 pin; make it an output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Mic/Line-in jack is connected to mic1 pin, so make it an input */
......@@ -2374,18 +2674,337 @@ static struct hda_pcm_stream alc260_pcm_analog_capture = {
.channels_max = 2,
};
/*
* for BIOS auto-configuration
*/
static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid,
const char *pfx)
{
hda_nid_t nid_vol;
unsigned long vol_val, sw_val;
char name[32];
int err;
if (nid >= 0x0f && nid < 0x11) {
nid_vol = nid - 0x7;
vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT);
sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
} else if (nid == 0x11) {
nid_vol = nid - 0x7;
vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0, HDA_OUTPUT);
sw_val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
} else if (nid >= 0x12 && nid <= 0x15) {
nid_vol = 0x08;
vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT);
sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
} else
return 0; /* N/A */
snprintf(name, sizeof(name), "%s Playback Volume", pfx);
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val)) < 0)
return err;
snprintf(name, sizeof(name), "%s Playback Switch", pfx);
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val)) < 0)
return err;
return 1;
}
/* add playback controls from the parsed DAC table */
static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
hda_nid_t nid;
int err;
spec->multiout.num_dacs = 1;
spec->multiout.dac_nids = spec->private_dac_nids;
spec->multiout.dac_nids[0] = 0x02;
nid = cfg->line_out_pins[0];
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Front");
if (err < 0)
return err;
}
nid = cfg->speaker_pin;
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Speaker");
if (err < 0)
return err;
}
nid = cfg->hp_pin;
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Headphone");
if (err < 0)
return err;
}
return 0;
}
/* create playback/capture controls for input pins */
static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
static char *labels[AUTO_PIN_LAST] = {
"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
};
struct hda_input_mux *imux = &spec->private_imux;
int i, err, idx;
for (i = 0; i < AUTO_PIN_LAST; i++) {
if (cfg->input_pins[i] >= 0x12) {
idx = cfg->input_pins[i] - 0x12;
err = new_analog_input(spec, cfg->input_pins[i], labels[i], idx, 0x07);
if (err < 0)
return err;
imux->items[imux->num_items].label = labels[i];
imux->items[imux->num_items].index = idx;
imux->num_items++;
}
if ((cfg->input_pins[i] >= 0x0f) && (cfg->input_pins[i] <= 0x10)){
idx = cfg->input_pins[i] - 0x09;
err = new_analog_input(spec, cfg->input_pins[i], labels[i], idx, 0x07);
if (err < 0)
return err;
imux->items[imux->num_items].label = labels[i];
imux->items[imux->num_items].index = idx;
imux->num_items++;
}
}
return 0;
}
static void alc260_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
int sel_idx)
{
/* set as output */
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
/* need the manual connection? */
if (nid >= 0x12) {
int idx = nid - 0x12;
snd_hda_codec_write(codec, idx + 0x0b, 0,
AC_VERB_SET_CONNECT_SEL, sel_idx);
}
}
static void alc260_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t nid;
nid = spec->autocfg.line_out_pins[0];
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
nid = spec->autocfg.speaker_pin;
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
nid = spec->autocfg.hp_pin;
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
}
#define ALC260_PIN_CD_NID 0x16
static void alc260_auto_init_analog_input(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if (nid >= 0x12) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
if (nid != ALC260_PIN_CD_NID)
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_MUTE);
}
}
}
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc260_volume_init_verbs[] = {
/*
* Unmute ADC0-1 and set the default input to mic-in
*/
{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/*
* Set up output mixers (0x08 - 0x0a)
*/
/* set vol=0 to output mixers */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* set up input amps for analog loopback */
/* Amp Indices: DAC = 0, mixer = 1 */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{ }
};
static int alc260_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
unsigned int wcap;
int err;
static hda_nid_t alc260_ignore[] = { 0x17, 0 };
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc260_ignore)) < 0)
return err;
if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
! spec->autocfg.hp_pin)
return 0; /* can't find valid BIOS pin config */
if ((err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
spec->multiout.max_channels = 2;
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC260_DIGOUT_NID;
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
spec->init_verbs[spec->num_init_verbs++] = alc260_volume_init_verbs;
spec->input_mux = &spec->private_imux;
/* check whether NID 0x04 is valid */
wcap = snd_hda_param_read(codec, alc260_adc_nids[0], AC_PAR_AUDIO_WIDGET_CAP);
wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc260_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt);
spec->mixers[spec->num_mixers] = alc260_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc260_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
spec->mixers[spec->num_mixers] = alc260_capture_mixer;
spec->num_mixers++;
}
return 1;
}
/* init callback for auto-configuration model -- overriding the default init */
static int alc260_auto_init(struct hda_codec *codec)
{
alc_init(codec);
alc260_auto_init_multi_out(codec);
alc260_auto_init_analog_input(codec);
return 0;
}
/*
* ALC260 configurations
*/
static struct hda_board_config alc260_cfg_tbl[] = {
{ .modelname = "basic", .config = ALC260_BASIC },
{ .modelname = "hp", .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .config = ALC260_HP },
{ .modelname = "fujitsu", .config = ALC260_FUJITSU_S702x },
{ .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702x },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3012, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3013, .config = ALC260_HP_3013 },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3014, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3015, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3016, .config = ALC260_HP },
{ .modelname = "fujitsu", .config = ALC260_FUJITSU_S702X },
{ .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702X },
{ .modelname = "auto", .config = ALC260_AUTO },
{}
};
static struct alc_config_preset alc260_presets[] = {
[ALC260_BASIC] = {
.mixers = { alc260_base_output_mixer,
alc260_input_mixer,
alc260_pc_beep_mixer,
alc260_capture_mixer },
.init_verbs = { alc260_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
.adc_nids = alc260_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
[ALC260_HP] = {
.mixers = { alc260_base_output_mixer,
alc260_input_mixer,
alc260_capture_alt_mixer },
.init_verbs = { alc260_hp_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
.adc_nids = alc260_hp_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
[ALC260_HP_3013] = {
.mixers = { alc260_hp_3013_mixer,
alc260_input_mixer,
alc260_capture_alt_mixer },
.init_verbs = { alc260_hp_3013_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
.adc_nids = alc260_hp_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
[ALC260_FUJITSU_S702X] = {
.mixers = { alc260_fujitsu_mixer,
alc260_capture_mixer },
.init_verbs = { alc260_fujitsu_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
.adc_nids = alc260_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_fujitsu_capture_source,
},
};
static int patch_alc260(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
int err, board_config;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
......@@ -2396,60 +3015,31 @@ static int patch_alc260(struct hda_codec *codec)
board_config = snd_hda_check_board_config(codec, alc260_cfg_tbl);
if (board_config < 0 || board_config >= ALC260_MODEL_LAST) {
snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260\n");
board_config = ALC260_BASIC;
board_config = ALC260_AUTO;
}
switch (board_config) {
case ALC260_HP:
spec->mixers[spec->num_mixers] = alc260_hp_mixer;
spec->num_mixers++;
break;
case ALC260_FUJITSU_S702x:
spec->mixers[spec->num_mixers] = alc260_fujitsu_mixer;
spec->num_mixers++;
break;
default:
spec->mixers[spec->num_mixers] = alc260_base_mixer;
spec->num_mixers++;
break;
if (board_config == ALC260_AUTO) {
/* automatic parse from the BIOS config */
err = alc260_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
} else if (! err) {
printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
board_config = ALC260_BASIC;
}
if (board_config != ALC260_FUJITSU_S702x) {
spec->init_verbs[0] = alc260_init_verbs;
spec->num_init_verbs = 1;
} else {
spec->init_verbs[0] = alc260_fujitsu_init_verbs;
spec->num_init_verbs = 1;
}
spec->channel_mode = alc260_modes;
spec->num_channel_mode = ARRAY_SIZE(alc260_modes);
if (board_config != ALC260_AUTO)
setup_preset(spec, &alc260_presets[board_config]);
spec->stream_name_analog = "ALC260 Analog";
spec->stream_analog_playback = &alc260_pcm_analog_playback;
spec->stream_analog_capture = &alc260_pcm_analog_capture;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = ARRAY_SIZE(alc260_dac_nids);
spec->multiout.dac_nids = alc260_dac_nids;
if (board_config != ALC260_FUJITSU_S702x) {
spec->input_mux = &alc260_capture_source;
} else {
spec->input_mux = &alc260_fujitsu_capture_source;
}
switch (board_config) {
case ALC260_HP:
spec->num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids);
spec->adc_nids = alc260_hp_adc_nids;
break;
default:
spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
spec->adc_nids = alc260_adc_nids;
break;
}
codec->patch_ops = alc_patch_ops;
if (board_config == ALC260_AUTO)
codec->patch_ops.init = alc260_auto_init;
return 0;
}
......@@ -2466,6 +3056,8 @@ static int patch_alc260(struct hda_codec *codec)
* In addition, an independent DAC for the multi-playback (not used in this
* driver yet).
*/
#define ALC882_DIGOUT_NID 0x06
#define ALC882_DIGIN_NID 0x0a
static struct hda_channel_mode alc882_ch_modes[1] = {
{ 8, NULL }
......@@ -2476,10 +3068,9 @@ static hda_nid_t alc882_dac_nids[4] = {
0x02, 0x03, 0x04, 0x05
};
static hda_nid_t alc882_adc_nids[3] = {
/* ADC0-2 */
0x07, 0x08, 0x09,
};
/* identical with ALC880 */
#define alc882_adc_nids alc880_adc_nids
#define alc882_adc_nids_alt alc880_adc_nids_alt
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
......@@ -2522,6 +3113,33 @@ static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_ele
return 1;
}
/*
* 6ch mode
*/
static struct hda_verb alc882_sixstack_ch6_init[] = {
{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
{ 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ } /* end */
};
/*
* 8ch mode
*/
static struct hda_verb alc882_sixstack_ch8_init[] = {
{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ } /* end */
};
static struct hda_channel_mode alc882_sixstack_modes[2] = {
{ 6, alc882_sixstack_ch6_init },
{ 8, alc882_sixstack_ch8_init },
};
/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
* Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
*/
......@@ -2565,6 +3183,17 @@ static struct snd_kcontrol_new alc882_base_mixer[] = {
{ } /* end */
};
static struct snd_kcontrol_new alc882_chmode_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
},
{ } /* end */
};
static struct hda_verb alc882_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
......@@ -2645,44 +3274,1398 @@ static struct hda_verb alc882_init_verbs[] = {
{ }
};
static int patch_alc882(struct hda_codec *codec)
{
struct alc_spec *spec;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc882_auto_init_verbs[] = {
/*
* Unmute ADC0-2 and set the default input to mic-in
*/
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
spec->mixers[spec->num_mixers] = alc882_base_mixer;
spec->num_mixers++;
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
spec->dig_in_nid = ALC880_DIGIN_NID;
spec->init_verbs[0] = alc882_init_verbs;
spec->num_init_verbs = 1;
/*
* Set up output mixers (0x0c - 0x0f)
*/
/* set vol=0 to output mixers */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* set up input amps for analog loopback */
/* Amp Indices: DAC = 0, mixer = 1 */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer3 */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
{ }
};
/* capture mixer elements */
static struct snd_kcontrol_new alc882_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc882_mux_enum_info,
.get = alc882_mux_enum_get,
.put = alc882_mux_enum_put,
},
{ } /* end */
};
static struct snd_kcontrol_new alc882_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 3,
.info = alc882_mux_enum_info,
.get = alc882_mux_enum_get,
.put = alc882_mux_enum_put,
},
{ } /* end */
};
/* pcm configuration: identiacal with ALC880 */
#define alc882_pcm_analog_playback alc880_pcm_analog_playback
#define alc882_pcm_analog_capture alc880_pcm_analog_capture
#define alc882_pcm_digital_playback alc880_pcm_digital_playback
#define alc882_pcm_digital_capture alc880_pcm_digital_capture
/*
* configuration and preset
*/
static struct hda_board_config alc882_cfg_tbl[] = {
{ .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* MSI */
{ .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* Foxconn */
{ .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* ECS */
{ .modelname = "auto", .config = ALC861_AUTO },
{}
};
static struct alc_config_preset alc882_presets[] = {
[ALC882_3ST_DIG] = {
.mixers = { alc882_base_mixer },
.init_verbs = { alc882_init_verbs },
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
.dig_out_nid = ALC882_DIGOUT_NID,
.num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
.adc_nids = alc882_adc_nids,
.dig_in_nid = ALC882_DIGIN_NID,
.num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
.channel_mode = alc882_ch_modes,
.input_mux = &alc882_capture_source,
},
[ALC882_6ST_DIG] = {
.mixers = { alc882_base_mixer, alc882_chmode_mixer },
.init_verbs = { alc882_init_verbs },
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
.dig_out_nid = ALC882_DIGOUT_NID,
.num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
.adc_nids = alc882_adc_nids,
.dig_in_nid = ALC882_DIGIN_NID,
.num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
.channel_mode = alc882_sixstack_modes,
.input_mux = &alc882_capture_source,
},
};
/*
* BIOS auto configuration
*/
static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
int dac_idx)
{
/* set as output */
struct alc_spec *spec = codec->spec;
int idx;
if (spec->multiout.dac_nids[dac_idx] == 0x25)
idx = 4;
else
idx = spec->multiout.dac_nids[dac_idx] - 2;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
}
static void alc882_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i <= HDA_SIDE; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
if (nid)
alc882_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
}
}
static void alc882_auto_init_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
pin = spec->autocfg.hp_pin;
if (pin) /* connect to front */
alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */
}
#define alc882_is_input_pin(nid) alc880_is_input_pin(nid)
#define ALC882_PIN_CD_NID ALC880_PIN_CD_NID
static void alc882_auto_init_analog_input(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if (alc882_is_input_pin(nid)) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
if (nid != ALC882_PIN_CD_NID)
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_MUTE);
}
}
}
/* almost identical with ALC880 parser... */
static int alc882_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err = alc880_parse_auto_config(codec);
if (err < 0)
return err;
/* hack - override the init verbs */
spec->init_verbs[0] = alc882_auto_init_verbs;
return 0;
}
spec->channel_mode = alc882_ch_modes;
spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes);
/* init callback for auto-configuration model -- overriding the default init */
static int alc882_auto_init(struct hda_codec *codec)
{
alc_init(codec);
alc882_auto_init_multi_out(codec);
alc882_auto_init_hp_out(codec);
alc882_auto_init_analog_input(codec);
return 0;
}
/*
* ALC882 Headphone poll in 3.5.1a or 3.5.2
*/
static int patch_alc882(struct hda_codec *codec)
{
struct alc_spec *spec;
int err, board_config;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
board_config = snd_hda_check_board_config(codec, alc882_cfg_tbl);
if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
printk(KERN_INFO "hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...\n");
board_config = ALC882_AUTO;
}
if (board_config == ALC882_AUTO) {
/* automatic parse from the BIOS config */
err = alc882_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
} else if (! err) {
printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
board_config = ALC882_3ST_DIG;
}
}
if (board_config != ALC882_AUTO)
setup_preset(spec, &alc882_presets[board_config]);
spec->stream_name_analog = "ALC882 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
spec->stream_analog_capture = &alc880_pcm_analog_capture;
spec->stream_analog_playback = &alc882_pcm_analog_playback;
spec->stream_analog_capture = &alc882_pcm_analog_capture;
spec->stream_name_digital = "ALC882 Digital";
spec->stream_digital_playback = &alc880_pcm_digital_playback;
spec->stream_digital_capture = &alc880_pcm_digital_capture;
spec->multiout.max_channels = spec->channel_mode[0].channels;
spec->multiout.num_dacs = ARRAY_SIZE(alc882_dac_nids);
spec->multiout.dac_nids = alc882_dac_nids;
spec->stream_digital_playback = &alc882_pcm_digital_playback;
spec->stream_digital_capture = &alc882_pcm_digital_capture;
spec->input_mux = &alc882_capture_source;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
if (! spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = snd_hda_param_read(codec, 0x07,
AC_PAR_AUDIO_WIDGET_CAP);
wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc882_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
spec->mixers[spec->num_mixers] = alc882_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc882_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
spec->mixers[spec->num_mixers] = alc882_capture_mixer;
spec->num_mixers++;
}
}
codec->patch_ops = alc_patch_ops;
if (board_config == ALC882_AUTO)
codec->patch_ops.init = alc882_auto_init;
return 0;
}
/*
* ALC262 support
*/
#define ALC262_DIGOUT_NID ALC880_DIGOUT_NID
#define ALC262_DIGIN_NID ALC880_DIGIN_NID
#define alc262_dac_nids alc260_dac_nids
#define alc262_adc_nids alc882_adc_nids
#define alc262_adc_nids_alt alc882_adc_nids_alt
#define alc262_modes alc260_modes
static struct snd_kcontrol_new alc262_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
/* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.count = 1,
.info = alc882_mux_enum_info,
.get = alc882_mux_enum_get,
.put = alc882_mux_enum_put,
},
{ } /* end */
};
#define alc262_capture_mixer alc882_capture_mixer
#define alc262_capture_alt_mixer alc882_capture_alt_mixer
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc262_init_verbs[] = {
/*
* Unmute ADC0-2 and set the default input to mic-in
*/
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/*
* Set up output mixers (0x0c - 0x0e)
*/
/* set vol=0 to output mixers */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* set up input amps for analog loopback */
/* Amp Indices: DAC = 0, mixer = 1 */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer3 */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
{ }
};
/* add playback controls from the parsed DAC table */
static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
hda_nid_t nid;
int err;
spec->multiout.num_dacs = 1; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
spec->multiout.dac_nids[0] = 2;
nid = cfg->line_out_pins[0];
if (nid) {
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Front Playback Volume",
HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Front Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
}
nid = cfg->speaker_pin;
if (nid) {
if (nid == 0x16) {
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
return err;
} else {
if (! cfg->line_out_pins[0])
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
}
}
nid = cfg->hp_pin;
if (nid) {
/* spec->multiout.hp_nid = 2; */
if (nid == 0x16) {
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
return err;
} else {
if (! cfg->line_out_pins[0])
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
}
}
return 0;
}
/* identical with ALC880 */
#define alc262_auto_create_analog_input_ctls alc880_auto_create_analog_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc262_volume_init_verbs[] = {
/*
* Unmute ADC0-2 and set the default input to mic-in
*/
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/*
* Set up output mixers (0x0c - 0x0f)
*/
/* set vol=0 to output mixers */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
/* set up input amps for analog loopback */
/* Amp Indices: DAC = 0, mixer = 1 */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer3 */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
{ }
};
/* pcm configuration: identiacal with ALC880 */
#define alc262_pcm_analog_playback alc880_pcm_analog_playback
#define alc262_pcm_analog_capture alc880_pcm_analog_capture
#define alc262_pcm_digital_playback alc880_pcm_digital_playback
#define alc262_pcm_digital_capture alc880_pcm_digital_capture
/*
* BIOS auto configuration
*/
static int alc262_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc262_ignore[] = { 0x1d, 0 };
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc262_ignore)) < 0)
return err;
if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
! spec->autocfg.hp_pin)
return 0; /* can't find valid BIOS pin config */
if ((err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC262_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = ALC262_DIGIN_NID;
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
spec->init_verbs[spec->num_init_verbs++] = alc262_volume_init_verbs;
spec->input_mux = &spec->private_imux;
return 1;
}
#define alc262_auto_init_multi_out alc882_auto_init_multi_out
#define alc262_auto_init_hp_out alc882_auto_init_hp_out
#define alc262_auto_init_analog_input alc882_auto_init_analog_input
/* init callback for auto-configuration model -- overriding the default init */
static int alc262_auto_init(struct hda_codec *codec)
{
alc_init(codec);
alc262_auto_init_multi_out(codec);
alc262_auto_init_hp_out(codec);
alc262_auto_init_analog_input(codec);
return 0;
}
/*
* configuration and preset
*/
static struct hda_board_config alc262_cfg_tbl[] = {
{ .modelname = "basic", .config = ALC262_BASIC },
{ .modelname = "auto", .config = ALC262_AUTO },
{}
};
static struct alc_config_preset alc262_presets[] = {
[ALC262_BASIC] = {
.mixers = { alc262_base_mixer },
.init_verbs = { alc262_init_verbs },
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
},
};
static int patch_alc262(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
int err;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
#if 0
/* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is under-run */
{
int tmp;
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PROC_COEF, tmp | 0x80);
}
#endif
board_config = snd_hda_check_board_config(codec, alc262_cfg_tbl);
if (board_config < 0 || board_config >= ALC262_MODEL_LAST) {
printk(KERN_INFO "hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...\n");
board_config = ALC262_AUTO;
}
if (board_config == ALC262_AUTO) {
/* automatic parse from the BIOS config */
err = alc262_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
} else if (! err) {
printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
board_config = ALC262_BASIC;
}
}
if (board_config != ALC262_AUTO)
setup_preset(spec, &alc262_presets[board_config]);
spec->stream_name_analog = "ALC262 Analog";
spec->stream_analog_playback = &alc262_pcm_analog_playback;
spec->stream_analog_capture = &alc262_pcm_analog_capture;
spec->stream_name_digital = "ALC262 Digital";
spec->stream_digital_playback = &alc262_pcm_digital_playback;
spec->stream_digital_capture = &alc262_pcm_digital_capture;
if (! spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = snd_hda_param_read(codec, 0x07,
AC_PAR_AUDIO_WIDGET_CAP);
wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc262_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
spec->mixers[spec->num_mixers] = alc262_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc262_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids);
spec->mixers[spec->num_mixers] = alc262_capture_mixer;
spec->num_mixers++;
}
}
codec->patch_ops = alc_patch_ops;
if (board_config == ALC262_AUTO)
codec->patch_ops.init = alc262_auto_init;
return 0;
}
/*
* ALC861 channel source setting (2/6 channel selection for 3-stack)
*/
/*
* set the path ways for 2 channel output
* need to set the codec line out and mic 1 pin widgets to inputs
*/
static struct hda_verb alc861_threestack_ch2_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, //mic
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, //line in
{ } /* end */
};
/*
* 6ch mode
* need to set the codec line out and mic 1 pin widgets to outputs
*/
static struct hda_verb alc861_threestack_ch6_init[] = {
/* set pin widget 1Ah (line in) for output (Back Surround)*/
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
/* set pin widget 18h (mic1) for output (CLFE)*/
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, //mic
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, //line in
{ } /* end */
};
static struct hda_channel_mode alc861_threestack_modes[2] = {
{ 2, alc861_threestack_ch2_init },
{ 6, alc861_threestack_ch6_init },
};
/* patch-ALC861 */
static struct snd_kcontrol_new alc861_base_mixer[] = {
/* output mixer control */
HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
/*Input mixer control */
/* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static struct snd_kcontrol_new alc861_3ST_mixer[] = {
/* output mixer control */
HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
/*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
/* Input mixer control */
/* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
.private_value = ARRAY_SIZE(alc861_threestack_modes),
},
{ } /* end */
};
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc861_base_init_verbs[] = {
/*
* Unmute ADC0 and set the default input to mic-in
*/
/* port-A for surround (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0e, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* port-C for line-in (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* port-D for Front */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* route front mic to ADC1*/
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute DAC0~3 & spdif out*/
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute Mixer 14 (mic) 1c (Line in)*/
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Unmute Stereo Mixer 15 */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
static struct hda_verb alc861_threestack_init_verbs[] = {
/*
* Unmute ADC0 and set the default input to mic-in
*/
/* port-A for surround (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* port-C for line-in (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* port-D for Front */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* route front mic to ADC1*/
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute DAC0~3 & spdif out*/
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute Mixer 14 (mic) 1c (Line in)*/
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Unmute Stereo Mixer 15 */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc861_auto_init_verbs[] = {
/*
* Unmute ADC0 and set the default input to mic-in
*/
// {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute DAC0~3 & spdif out*/
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute Mixer 14 (mic) 1c (Line in)*/
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Unmute Stereo Mixer 15 */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, // set Mic 1
{ }
};
/* pcm configuration: identiacal with ALC880 */
#define alc861_pcm_analog_playback alc880_pcm_analog_playback
#define alc861_pcm_analog_capture alc880_pcm_analog_capture
#define alc861_pcm_digital_playback alc880_pcm_digital_playback
#define alc861_pcm_digital_capture alc880_pcm_digital_capture
#define ALC861_DIGOUT_NID 0x07
static struct hda_channel_mode alc861_8ch_modes[1] = {
{ 8, NULL }
};
static hda_nid_t alc861_dac_nids[4] = {
/* front, surround, clfe, side */
0x03, 0x06, 0x05, 0x04
};
static hda_nid_t alc861_adc_nids[1] = {
/* ADC0-2 */
0x08,
};
static struct hda_input_mux alc861_capture_source = {
.num_items = 5,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x3 },
{ "Line", 0x1 },
{ "CD", 0x4 },
{ "Mixer", 0x5 },
},
};
/* fill in the dac_nids table from the parsed pin configuration */
static int alc861_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
int i;
hda_nid_t nid;
spec->multiout.dac_nids = spec->private_dac_nids;
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
if (nid) {
if (i >= ARRAY_SIZE(alc861_dac_nids))
continue;
spec->multiout.dac_nids[i] = alc861_dac_nids[i];
}
}
spec->multiout.num_dacs = cfg->line_outs;
return 0;
}
/* add playback controls from the parsed DAC table */
static int alc861_auto_create_multi_out_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
char name[32];
static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
hda_nid_t nid;
int i, idx, err;
for (i = 0; i < cfg->line_outs; i++) {
nid = spec->multiout.dac_nids[i];
if (! nid)
continue;
if (nid == 0x05) {
/* Center/LFE */
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
return err;
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
return err;
} else {
for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1; idx++)
if (nid == alc861_dac_nids[idx])
break;
sprintf(name, "%s Playback Switch", chname[idx]);
if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
}
}
return 0;
}
static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
{
int err;
hda_nid_t nid;
if (! pin)
return 0;
if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) {
nid = 0x03;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
spec->multiout.hp_nid = nid;
}
return 0;
}
/* create playback/capture controls for input pins */
static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
static char *labels[AUTO_PIN_LAST] = {
"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
};
struct hda_input_mux *imux = &spec->private_imux;
int i, err, idx, idx1;
for (i = 0; i < AUTO_PIN_LAST; i++) {
switch(cfg->input_pins[i]) {
case 0x0c:
idx1 = 1;
idx = 2; // Line In
break;
case 0x0f:
idx1 = 2;
idx = 2; // Line In
break;
case 0x0d:
idx1 = 0;
idx = 1; // Mic In
break;
case 0x10:
idx1 = 3;
idx = 1; // Mic In
break;
case 0x11:
idx1 = 4;
idx = 0; // CD
break;
default:
continue;
}
err = new_analog_input(spec, cfg->input_pins[i], labels[i], idx, 0x15);
if (err < 0)
return err;
imux->items[imux->num_items].label = labels[i];
imux->items[imux->num_items].index = idx1;
imux->num_items++;
}
return 0;
}
static struct snd_kcontrol_new alc861_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
*FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
static void alc861_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid,
int pin_type, int dac_idx)
{
/* set as output */
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
}
static void alc861_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < spec->autocfg.line_outs; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
if (nid)
alc861_auto_set_output_and_unmute(codec, nid, PIN_OUT, spec->multiout.dac_nids[i]);
}
}
static void alc861_auto_init_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
pin = spec->autocfg.hp_pin;
if (pin) /* connect to front */
alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, spec->multiout.dac_nids[0]);
}
static void alc861_auto_init_analog_input(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if ((nid>=0x0c) && (nid <=0x11)) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
}
}
}
/* parse the BIOS configuration and set up the alc_spec */
/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
static int alc861_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc861_ignore[] = { 0x1d, 0 };
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc861_ignore)) < 0)
return err;
if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
! spec->autocfg.hp_pin)
return 0; /* can't find valid BIOS pin config */
if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
(err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
(err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
spec->init_verbs[spec->num_init_verbs++] = alc861_auto_init_verbs;
spec->input_mux = &spec->private_imux;
spec->adc_nids = alc861_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
spec->mixers[spec->num_mixers] = alc861_capture_mixer;
spec->num_mixers++;
return 1;
}
/* init callback for auto-configuration model -- overriding the default init */
static int alc861_auto_init(struct hda_codec *codec)
{
alc_init(codec);
alc861_auto_init_multi_out(codec);
alc861_auto_init_hp_out(codec);
alc861_auto_init_analog_input(codec);
return 0;
}
/*
* configuration and preset
*/
static struct hda_board_config alc861_cfg_tbl[] = {
{ .modelname = "3stack", .config = ALC861_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xd600, .config = ALC861_3ST },
{ .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
{ .modelname = "auto", .config = ALC861_AUTO },
{}
};
static struct alc_config_preset alc861_presets[] = {
[ALC861_3ST] = {
.mixers = { alc861_3ST_mixer },
.init_verbs = { alc861_threestack_init_verbs },
.num_dacs = ARRAY_SIZE(alc861_dac_nids),
.dac_nids = alc861_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
.channel_mode = alc861_threestack_modes,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
[ALC861_3ST_DIG] = {
.mixers = { alc861_base_mixer },
.init_verbs = { alc861_threestack_init_verbs },
.num_dacs = ARRAY_SIZE(alc861_dac_nids),
.dac_nids = alc861_dac_nids,
.dig_out_nid = ALC861_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
.channel_mode = alc861_threestack_modes,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
[ALC861_6ST_DIG] = {
.mixers = { alc861_base_mixer },
.init_verbs = { alc861_base_init_verbs },
.num_dacs = ARRAY_SIZE(alc861_dac_nids),
.dac_nids = alc861_dac_nids,
.dig_out_nid = ALC861_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc861_8ch_modes),
.channel_mode = alc861_8ch_modes,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
};
static int patch_alc861(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
int err;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
board_config = snd_hda_check_board_config(codec, alc861_cfg_tbl);
if (board_config < 0 || board_config >= ALC861_MODEL_LAST) {
printk(KERN_INFO "hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...\n");
board_config = ALC861_AUTO;
}
if (board_config == ALC861_AUTO) {
/* automatic parse from the BIOS config */
err = alc861_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
} else if (! err) {
printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
board_config = ALC861_3ST_DIG;
}
}
if (board_config != ALC861_AUTO)
setup_preset(spec, &alc861_presets[board_config]);
spec->stream_name_analog = "ALC861 Analog";
spec->stream_analog_playback = &alc861_pcm_analog_playback;
spec->stream_analog_capture = &alc861_pcm_analog_capture;
spec->stream_name_digital = "ALC861 Digital";
spec->stream_digital_playback = &alc861_pcm_digital_playback;
spec->stream_digital_capture = &alc861_pcm_digital_capture;
codec->patch_ops = alc_patch_ops;
if (board_config == ALC861_AUTO)
codec->patch_ops.init = alc861_auto_init;
return 0;
}
......@@ -2692,7 +4675,11 @@ static int patch_alc882(struct hda_codec *codec)
*/
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
{ .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
{ .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
{} /* terminator */
};
sound/pci/hda/patch_sigmatel.c
View file @ df694daa
......@@ -761,7 +761,7 @@ static int stac922x_parse_auto_config(struct hda_codec *codec)
struct sigmatel_spec *spec = codec->spec;
int err;
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL)) < 0)
return err;
if ((err = stac92xx_add_dyn_out_pins(codec, &spec->autocfg)) < 0)
return err;
......@@ -801,7 +801,7 @@ static int stac9200_parse_auto_config(struct hda_codec *codec)
struct sigmatel_spec *spec = codec->spec;
int err;
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL)) < 0)
return err;
if ((err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg)) < 0)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7