Commit e01bf509 authored by Takashi Iwai's avatar Takashi Iwai Committed by Jaroslav Kysela

ALSA: hda - Fix ALC269 capture source

ALC269 capture source wasn't properly set up.
It's an independent MUX (0x23), not a source of ADC.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
parent 5503600a
...@@ -11042,6 +11042,14 @@ static hda_nid_t alc269_adc_nids[1] = { ...@@ -11042,6 +11042,14 @@ static hda_nid_t alc269_adc_nids[1] = {
0x08, 0x08,
}; };
static hda_nid_t alc269_capsrc_nids[1] = {
0x23,
};
/* NOTE: ADC2 (0x07) is connected from a recording *MIXER* (0x24),
* not a mux!
*/
static struct hda_input_mux alc269_eeepc_dmic_capture_source = { static struct hda_input_mux alc269_eeepc_dmic_capture_source = {
.num_items = 2, .num_items = 2,
.items = { .items = {
...@@ -11424,6 +11432,10 @@ static int alc269_parse_auto_config(struct hda_codec *codec) ...@@ -11424,6 +11432,10 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
spec->init_verbs[spec->num_init_verbs++] = alc269_init_verbs; spec->init_verbs[spec->num_init_verbs++] = alc269_init_verbs;
spec->num_mux_defs = 1; spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux; spec->input_mux = &spec->private_imux;
/* set default input source */
snd_hda_codec_write_cache(codec, alc269_capsrc_nids[0],
0, AC_VERB_SET_CONNECT_SEL,
spec->input_mux->items[0].index);
err = alc_auto_add_mic_boost(codec); err = alc_auto_add_mic_boost(codec);
if (err < 0) if (err < 0)
...@@ -11556,6 +11568,7 @@ static int patch_alc269(struct hda_codec *codec) ...@@ -11556,6 +11568,7 @@ static int patch_alc269(struct hda_codec *codec)
spec->adc_nids = alc269_adc_nids; spec->adc_nids = alc269_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids); spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
spec->capsrc_nids = alc269_capsrc_nids;
codec->patch_ops = alc_patch_ops; codec->patch_ops = alc_patch_ops;
if (board_config == ALC269_AUTO) if (board_config == ALC269_AUTO)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment