Commit e1171e8d authored by Johan Hedberg's avatar Johan Hedberg Committed by Gustavo Padovan

Bluetooth: Add initial support for LE-only controllers

This patch splits off most the HCI init sequence commands from a fixed
set into a conditional one that is sent once the HCI_Read_Local_Features
and HCI_Read_Local_Version_Information commands complete. This is
necessary since many of the current fixed commands are not allowed for
LE-only controllers.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Acked-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
parent 2ad8f54b
...@@ -178,48 +178,13 @@ static void hci_reset_req(struct hci_dev *hdev, unsigned long opt) ...@@ -178,48 +178,13 @@ static void hci_reset_req(struct hci_dev *hdev, unsigned long opt)
static void bredr_init(struct hci_dev *hdev) static void bredr_init(struct hci_dev *hdev)
{ {
struct hci_cp_delete_stored_link_key cp;
__le16 param;
__u8 flt_type;
hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED; hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED;
/* Mandatory initialization */
/* Read Local Supported Features */ /* Read Local Supported Features */
hci_send_cmd(hdev, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); hci_send_cmd(hdev, HCI_OP_READ_LOCAL_FEATURES, 0, NULL);
/* Read Local Version */ /* Read Local Version */
hci_send_cmd(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL); hci_send_cmd(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL);
/* Read Buffer Size (ACL mtu, max pkt, etc.) */
hci_send_cmd(hdev, HCI_OP_READ_BUFFER_SIZE, 0, NULL);
/* Read BD Address */
hci_send_cmd(hdev, HCI_OP_READ_BD_ADDR, 0, NULL);
/* Read Class of Device */
hci_send_cmd(hdev, HCI_OP_READ_CLASS_OF_DEV, 0, NULL);
/* Read Local Name */
hci_send_cmd(hdev, HCI_OP_READ_LOCAL_NAME, 0, NULL);
/* Read Voice Setting */
hci_send_cmd(hdev, HCI_OP_READ_VOICE_SETTING, 0, NULL);
/* Optional initialization */
/* Clear Event Filters */
flt_type = HCI_FLT_CLEAR_ALL;
hci_send_cmd(hdev, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
/* Connection accept timeout ~20 secs */
param = __constant_cpu_to_le16(0x7d00);
hci_send_cmd(hdev, HCI_OP_WRITE_CA_TIMEOUT, 2, &param);
bacpy(&cp.bdaddr, BDADDR_ANY);
cp.delete_all = 1;
hci_send_cmd(hdev, HCI_OP_DELETE_STORED_LINK_KEY, sizeof(cp), &cp);
} }
static void amp_init(struct hci_dev *hdev) static void amp_init(struct hci_dev *hdev)
...@@ -273,14 +238,6 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt) ...@@ -273,14 +238,6 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt)
} }
} }
static void hci_le_init_req(struct hci_dev *hdev, unsigned long opt)
{
BT_DBG("%s", hdev->name);
/* Read LE buffer size */
hci_send_cmd(hdev, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL);
}
static void hci_scan_req(struct hci_dev *hdev, unsigned long opt) static void hci_scan_req(struct hci_dev *hdev, unsigned long opt)
{ {
__u8 scan = opt; __u8 scan = opt;
...@@ -687,10 +644,6 @@ int hci_dev_open(__u16 dev) ...@@ -687,10 +644,6 @@ int hci_dev_open(__u16 dev)
ret = __hci_request(hdev, hci_init_req, 0, HCI_INIT_TIMEOUT); ret = __hci_request(hdev, hci_init_req, 0, HCI_INIT_TIMEOUT);
if (lmp_host_le_capable(hdev))
ret = __hci_request(hdev, hci_le_init_req, 0,
HCI_INIT_TIMEOUT);
clear_bit(HCI_INIT, &hdev->flags); clear_bit(HCI_INIT, &hdev->flags);
} }
......
...@@ -507,11 +507,13 @@ static void hci_setup_event_mask(struct hci_dev *hdev) ...@@ -507,11 +507,13 @@ static void hci_setup_event_mask(struct hci_dev *hdev)
if (hdev->hci_ver < BLUETOOTH_VER_1_2) if (hdev->hci_ver < BLUETOOTH_VER_1_2)
return; return;
events[4] |= 0x01; /* Flow Specification Complete */ if (lmp_bredr_capable(hdev)) {
events[4] |= 0x02; /* Inquiry Result with RSSI */ events[4] |= 0x01; /* Flow Specification Complete */
events[4] |= 0x04; /* Read Remote Extended Features Complete */ events[4] |= 0x02; /* Inquiry Result with RSSI */
events[5] |= 0x08; /* Synchronous Connection Complete */ events[4] |= 0x04; /* Read Remote Extended Features Complete */
events[5] |= 0x10; /* Synchronous Connection Changed */ events[5] |= 0x08; /* Synchronous Connection Complete */
events[5] |= 0x10; /* Synchronous Connection Changed */
}
if (hdev->features[3] & LMP_RSSI_INQ) if (hdev->features[3] & LMP_RSSI_INQ)
events[4] |= 0x02; /* Inquiry Result with RSSI */ events[4] |= 0x02; /* Inquiry Result with RSSI */
...@@ -550,11 +552,57 @@ static void hci_setup_event_mask(struct hci_dev *hdev) ...@@ -550,11 +552,57 @@ static void hci_setup_event_mask(struct hci_dev *hdev)
hci_send_cmd(hdev, HCI_OP_SET_EVENT_MASK, sizeof(events), events); hci_send_cmd(hdev, HCI_OP_SET_EVENT_MASK, sizeof(events), events);
} }
static void bredr_init(struct hci_dev *hdev)
{
struct hci_cp_delete_stored_link_key cp;
__le16 param;
__u8 flt_type;
/* Read Buffer Size (ACL mtu, max pkt, etc.) */
hci_send_cmd(hdev, HCI_OP_READ_BUFFER_SIZE, 0, NULL);
/* Read Class of Device */
hci_send_cmd(hdev, HCI_OP_READ_CLASS_OF_DEV, 0, NULL);
/* Read Local Name */
hci_send_cmd(hdev, HCI_OP_READ_LOCAL_NAME, 0, NULL);
/* Read Voice Setting */
hci_send_cmd(hdev, HCI_OP_READ_VOICE_SETTING, 0, NULL);
/* Clear Event Filters */
flt_type = HCI_FLT_CLEAR_ALL;
hci_send_cmd(hdev, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
/* Connection accept timeout ~20 secs */
param = __constant_cpu_to_le16(0x7d00);
hci_send_cmd(hdev, HCI_OP_WRITE_CA_TIMEOUT, 2, &param);
bacpy(&cp.bdaddr, BDADDR_ANY);
cp.delete_all = 1;
hci_send_cmd(hdev, HCI_OP_DELETE_STORED_LINK_KEY, sizeof(cp), &cp);
}
static void le_init(struct hci_dev *hdev)
{
/* Read LE Buffer Size */
hci_send_cmd(hdev, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL);
}
static void hci_setup(struct hci_dev *hdev) static void hci_setup(struct hci_dev *hdev)
{ {
if (hdev->dev_type != HCI_BREDR) if (hdev->dev_type != HCI_BREDR)
return; return;
/* Read BD Address */
hci_send_cmd(hdev, HCI_OP_READ_BD_ADDR, 0, NULL);
if (lmp_bredr_capable(hdev))
bredr_init(hdev);
if (lmp_le_capable(hdev))
le_init(hdev);
hci_setup_event_mask(hdev); hci_setup_event_mask(hdev);
if (hdev->hci_ver > BLUETOOTH_VER_1_1) if (hdev->hci_ver > BLUETOOTH_VER_1_1)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment